Finding Plant Creation and Updation Date

Hi all,
I just want to find out if it is possible to find out Plant Creation and Updation Date using ABAP statements. Does it get stored in CHDHR or CDPOS and if yes, then what is the object Key.
Thanks

Check Report RSVTPROT with table name T001W for Plant changes. I do not think it updated CDHDR.
You can SUBMIT this report and get back the list in your custom program.
How to get list back in your custom program refer
http://scn.sap.com/thread/3147016

Similar Messages

Process Chain : Read PSA and Update Data Target in BI 7.0

Hello Experts,
In my Process Chain I have a variant Execute Infopackage to load the data only into PSA. then I have next variant as *Read PSA and Update Data Target*. my data target was a Master Data table Hierarchy
In the variant " Read PSA and Update Data Target". the selection Parameters were
PSA.Table : 0GLACCEXT_T011_HIER_BA1
Selection Object Type : same Infopackage in Varaint Execute Infopackage
the Error message was Variant doesnot contain a valid combination request/data target
I checked the PSA-Table using RSA1OLD Transaction then I find four PSA Tables:
0GLACCEXT_T011_HIER_BA1
0GLACCEXT_T011_HIER_BA2
0GLACCEXT_T011_HIER_BA3
0GLACCEXT_T011_HIER_BA4
All the requests are linked to PSA Table *0GLACCEXT_T011_HIER_BA4*.
I can't understand why there exists four PSA Tables?
I try to link the PSA-table 0GLACCEXT_T011_HIER_BA4 in the variant *Read PSA and Update Data Target and try to save it it raises short dump.
If I select 0GLACCEXT_T011_HIER_BA1 in the varaint I shouldn't face any problems.?
but the process chain raises an Error message Variant doesnot contain a valid combination request/data target with this variant.
How shall I handle this issue?
Please carify me the issues as soon as possible.
thanks in advance
Regards
sailekha

Hello,
In the Variant Read PSA and Update Data Target I have to select the PSA Tabelle Name from the preselection list in the System it shows me all the four PSA Tables that I mentioned.
I can select any one of them. So I trieed with all the four PSA Tables in the list but I can selct only the XXXX......BA1 table then only I can save and include it in the PC. If I select the remaining tables BA2, BA3, BA4.........while I try to save the Variant it raises short dump.
I checked the PSA using the Transaction RSA1OLD under PSA...... I find 4 PSA Tables( I don't know whether they are PSA Tables or not but in the Variant it states that they are PSA Tables) in which all the requests are attached to BA4. only.
I observed that ony for Hierarchies I find four PSA tables for remaining one only one PSA table was available.
I totally confused how to handle this situation. any suggestions......... please help me to resolve this problem.
Thanks & Regards

Creation and Change Date for Tcode and Function Groups

Hello All,
I need to display the Creation and Change Dates for Custom Tcodes and Function Groups in a Report. Can anyone please let me know the logic of retrieving it.
regards,
Mahesh

Hi,
TADIR and TRDIR is the tables where you can find all these data
Regards
Sudheer

T code for Material,plant, stock and price data in std sap

Dear All,
In Std SAP is der any t-code to get Material,plant, stock and price data in 1 go..
waiting for ur early reply
Regards
Nainesh

Hi,
Try T.Code: MC.9 and MC.5 etc. These reports will give you total value of the stock but not unit price.
If you are looking at unit price please write a small query using SQVI or append the relevant info structure.
Regards
Srinivas.P

How to get new and updated data into LO Excel in Xcelsius

Dear Experts,
I have created dashboard on top of webi report by using Live-Office connection. Latest data of webi report is imported into excel and mapped data with components and generated SWF file and exported into server.
To day my webi report has latest instance with new and updated data. But until unless by clicking "Refresh All Objects" i am not getting updated data into excel.
When i am trying to open dashboard in BI Launch Pad/CMC it is showing data whatever exist in excel(i.e yesterday data). But here we need to show data of latest instance of webi report.(i.e New and updated data as of now).
I have selected option "Latest instance: From latest instance scheduled by" in "refresh options".
My Question & Doubts:
1) Is it mandatory to open dashboard every day and need to click on "Refresh All Objects" to get updated data into excel or dashboard.
2) Is there any option to automate this process.
Regards,
PRK.

Hi,
Schedule the webi report to get the latest data from the source. To answer your query no is doesn't require to open the dashboard every time to refresh the excel to get the latest data.
Please use the Refresh Before Components are Loaded: Select this option to refresh the data each time the model loads and to use that data as the initial data for the model (using a Reset Button component, it will reset the data to the values from the last time the model was loaded).
You are using the Live Office so here automatic refresh is not possible without touch the swf file, you need to use the refresh but to get the latest data. If you are using QAAWS, Web Service & XML then automatic refresh is possible.
For more information please check the below document for in-depth idea on the design pattern.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b02e31fb-3568-2e10-e78f-92412c3c0a96?overridelayout=t…
Kindly revert for more clarification!!!
--SumanT

Creating a external content type for Read and Update data from two tables in sqlserver using sharepoint designer

Hi
how to create a external content type for Read and Update data from two tables in sqlserver using sharepoint designer 2010
i created a bcs service using centraladministration site
i have two tables in sqlserver
1)Employee
-empno
-firstname
-lastname
2)EmpDepartment
-empno
-deptno
-location
i want to just create a list to display employee details from two tables
empid firstname deptno location
and same time update in two tables
adil

When I try to create an external content type based on a view (AdventureWorks2012.vSalesPerson) - I can display the data in an external list. When I attempt to edit it, I get an error:
External List fails when attached to a SQL view
Sorry, something went wrong
Failed to update a list item for this external list based on the Entity (External Content Type) 'SalesForce' in EntityNamespace 'http://xxxxxxxx'. Details: The query against the database caused an error.
I can edit the view in SQL Manager, so it seems strange that it fails.
Any advice would be greatly GREATLY appreciated.
Thanks,
Randy

Connecting to datasource and retrieve, insert and update data in SQL Server

hi,
i am trying to retrieve, insert and update data from SQL Server 2000 and display in JSPDynPage and is for Portal Application. I have already created datasource in visual composer. Is there any sample codes for mi to use it as reference???
Thanks
Regards,
shixuan

Hi,
See this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6209b52e-0401-0010-6a9f-d40ec3a09424
Regards,
Senthil kumar K.

Upgrade on SAP Plant Maintenance and Product Data Management

Hi Gurus,
I assigned to a upgrade project for Plant Maintenance and Product Data Managemet modules.
Please guide me what are the steps to follow and provide more information on this ...
Thanks in advance!!!!!!!!!
Regds,
RK

Hello Kurni,
In PDM/PLM latest version is PLM 7.0.
There are many new functionalities available in this version.
Earlier version can be accessed from SAP GUI, but the latest one can be accessed from Portal/NWBC.
DMS side many notes have to be applied as you will be instaling EHP4.0 as part of the upgrade.
ECM side some standard reports are missing in PLM 7.0, which were available in ECC6.0.
Regards
Prasad K

Connecting to datasource and retrieve, insert and update data

hi,
i am doing a JSP page that need to retrieve data and display on textView, insert data and update data. I have already create a datasource in Visual Composer. Does anyone have a sample codes for mi to use it as reference. So that i can connect to the datasource tat i created in Visual composer and retrieve, insert and update data. thanz
Regards,
shixuan

Hi,
After creating a data source in Visual composer .
you have to create a BI system that Visual Composer can use in
the SAP NetWeaver Portal.
refer this pdf file for further Info
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6209b52e-0401-0010-6a9f-d40ec3a09424
Regards,
Beevin

BW 3.5 - Update to PSA only / Read PSA and Update Data Target

Hi Folks,
I am planning to use on a BW 3.5 data source and infopackage that loads to PSA only (as the source system job runs quite long and we would run other prepration loads in parallel before pushed to final cube). And then later in the process chain the process Read PSA and Update Data Target to load the data to final cube.
As we plan to run the process chain 3 times a day I was wondering if the Read PSA and Update Data Target always takes only the latest request loaded to the PSA (as it is always the same infopackage) or do we have to delete the PSA request at the end of each process chain run so that not the next run will load the PSA request again as it is still in the PSA?
Thanks for all replies in advance,
Axel

You are loading the Delta till the PSA, multiple times a day, and after each update to the PSA you will send the data to the Cube.
Once its there in the PSA, you are performing further tasks & then updating the cube multiple times (once after each delta)
Well, the 1st load to the cube should be OK.
But, from the next load onwards, it would pick up all the requests from the PSA & you will have wrong values in the Cube.
Because, i think, while using 'Read PSA & Update the Target', you can't set it for a FULL or a DELTA load.
It will bring in everything that exists in the PSA.
I would advice you to clean the PSA before the starting next Delta.
But, there is a counter argument.
If the data mart sign is reflected in the PSA for the request that has been loaded into the cube, then the next time the system will pick up the request which does not have a data mart symbol.
You can always give this a try in your Dev system.
Edited by: Vishal Sanghvi on Apr 1, 2011 1:58 PM

Export Contact with creation and modify date

Hi All,
I need to export the contact created in AD ( windows 2008 )with creation and modified date.

Hi Vin,
In addition,
the following thread can be referred to as reference.
Exporting AD Objects by creation date
http://social.technet.microsoft.com/Forums/en-US/d8fd00ba-e97a-4e28-a67a-1d56bfddd554/exporting-ad-objects-by-creation-date?forum=winserverDS
Best regards,
Frank Shen

How to trigger pop-up window in report and update data base from report

Hi All,
I have a requirement, in a report output list to trigger a pop up window with some rejection codes corresponding to each sales order when i select from the output list. Also i need to update data base by selecting one of the rejection code in the pop-up window list for that sales order. Can any one please let me know how to achive this.
Also, i have check boxes for each record in the output list. Also, i have added one more check box as "Select All'. When select 'Sleect All' check box , all check boxes need to be checked, how to achieve this. PLease let me know.
Thanks in advance.
Regards,
Rajesh

Hi check this code of editable ALV report... I updated the data base with the changes made..in the editable ALV
*& Report ZJAY_EDIT_ALV
REPORT zjay_edit_alv.
* TYPE-POOLS *
TYPE-POOLS: slis.
* INTERNAL TABLES/WORK AREAS/VARIABLES
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
w_field TYPE slis_fieldcat_alv,
p_table LIKE dd02l-tabname,
dy_table TYPE REF TO data,
dy_tab TYPE REF TO data,
dy_line TYPE REF TO data.
* FIELD-SYMBOLS *
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
<dyn_wa> TYPE ANY,
<dyn_field> TYPE ANY,
<dyn_tab_temp> TYPE STANDARD TABLE.
* SELECTION SCREEN *
PARAMETERS: tabname(30) TYPE c DEFAULT 'MARA',
lines(5) TYPE n DEFAULT 7.
* START-OF-SELECTION *
START-OF-SELECTION.
* Storing table name
p_table = tabname.
* Create internal table dynamically with the stucture of table name
* entered in the selection screen
CREATE DATA dy_table TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_table->* TO <dyn_table>.
IF sy-subrc <> 0.
MESSAGE i000(z_zzz_ca_messages) WITH ' No table found'.
LEAVE TO LIST-PROCESSING.
ENDIF.
* Create workarea for the table
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
* Create another temp. table
CREATE DATA dy_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_tab->* TO <dyn_tab_temp>.
SORT i_fieldcat BY col_pos.
* Select data from table
SELECT * FROM (p_table)
INTO TABLE <dyn_table>
UP TO lines ROWS.
REFRESH <dyn_tab_temp>.
* Display report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'SET_PF_STATUS'
TABLES
t_outtab = <dyn_table>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form SET_PF_STATUS
* Setting custom PF-Status
* -->RT_EXTAB Excluding table
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTANDARD'. "copy it from SALV func group standard
ENDFORM. "SET_PF_STATUS
*& Form user_command
* Handling custom function codes
* -->R_UCOMM Function code value
* -->RS_SELFIELD Info. of cursor position in ALV
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* Local data declaration
DATA: li_tab TYPE REF TO data,
l_line TYPE REF TO data.
* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
<l_wa> TYPE ANY.
* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>.
CASE r_ucomm.
* When a record is selected
WHEN '&IC1'.
* Read the selected record
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
rs_selfield-tabindex.
IF sy-subrc = 0.
* Store the record in an internal table
APPEND <dyn_wa> TO <l_tab>.
* Fetch the field catalog info
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = p_table
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.
* Make all the fields input enabled except key fields
w_field-input = 'X'.
MODIFY i_fieldcat FROM w_field TRANSPORTING input
WHERE key IS INITIAL.
ENDIF.
* Display the record for editing purpose
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
it_fieldcat = i_fieldcat
i_screen_start_column = 10
i_screen_start_line = 15
i_screen_end_column = 200
i_screen_end_line = 20
TABLES
t_outtab = <l_tab>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* Read the modified data
READ TABLE <l_tab> INDEX 1 INTO <l_wa>.
* If the record is changed then track its index no.
* and populate it in an internal table for future
* action
IF sy-subrc = 0 AND <dyn_wa> <> <l_wa>.
<dyn_wa> = <l_wa>.
i_index = rs_selfield-tabindex.
APPEND i_index.
ENDIF.
ENDIF.
ENDIF.
* When save button is pressed
WHEN 'SAVE'.
* Sort the index table
SORT i_index.
* Delete all duplicate records
DELETE ADJACENT DUPLICATES FROM i_index.
LOOP AT i_index.
* Find out the changes in the internal table
* and populate these changes in another internal table
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX i_index.
IF sy-subrc = 0.
APPEND <dyn_wa> TO <dyn_tab_temp>.
ENDIF.
ENDLOOP.
* Lock the table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc = 0.
* Modify the database table with these changes
MODIFY (p_table) FROM TABLE <dyn_tab_temp>.
REFRESH <dyn_tab_temp>.
* Unlock the table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table.
ENDIF.
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM. "user_command

Creation and Modification dates for android file system

Hello all, I am working on a project and i noticed a particular scenario where i'm getting an error everytime i try to run the code below on my android device;
                var file:File=File.applicationDirectory.resolvePath("amf.js");
                var modDate:Date;
                var createDate:Date;
                 if(file.exists)
                        try
                                   modDate=file.modificationDate;
                                   credDate=file.creationDate;
                                   trace("Modification date: "+ modDate.toString()+"\nCreation date: "+credDate.toString());
                         catch(e:Error)
                                  trace(e.message+": Somehow android OS CANNOT READ mODIFICATRION AND CREATING DATES FOR FILES");
Every time i run this on Adobe AIR's Mobile emulator, the correct dates are show up properly(Possibly because the emulator is running on Windows) but when i switch the debug to the device, the statement in the catch block executes. The real error says "Error #3003: File or directory does not exist."
Am i missing something or is this a normal behaviour which i have to find a work around for? The modificationDate and the creationDate are all properties of the FileReference class which i didnt use to instanciate the file object because i wasnt uploading or downloading anything.
Any form of tip will be much appreciated.
Thanks.

I run into the same problem while working on some sort of file synching task.
Trying to read the file.modificationDate or creationDate results in an error: "Error #3003: File or directory does not exist."
I have obeserved that this only happens for files that were packaged with the app (and placed in the File.applicationDirectory).
Files that my app has downloaded and saved to the device (File.applicationStorageDirectory) do have a valid creation date and modification date.
Maybe the File.applicationDirectory has different rights?
Does anybody have a solution or workaround for this?

Get original file creation and modified date during upload - ONLY in explorerview ??

Hi,
SharePoint and me are having a difficult time again ;-)
I have the customer requirement to retain the original file's creation date and modified date.
Please do not start replying by just pasting links that you might find while searching for the keywords "retain creation date".
In a nutshell I found out that the original dates are only available in SharePoint if the
explorerview has been used. I always thought that the explorerview is a bad thing, but only here - the original creation date is stored in a property called "vti_ct". In the itemupdated eventreceiver you can get the
value and work with it.
Complete list of available properties
http://sbrickey.com/Tech/Blog/Post/Secrets_Revealed_SP_Event_Receivers_firing_multiple_times
Here I found the hint with the explorerview
http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010programming.aspx?ID=57bfd5f5-941f-4a89-919d-cdf7b0b801be
It is only available in the 2nd loop of the itemupdated event.
How the f*** can this happen??? The 2nd post states that when using the explorerview the file is being copied, while it is being re-created by using the SharePoint UI.
Has anyone a different approach for using the SharePoint UI?
I thought about different approaches for this issue. From my perspective it seems to be not solvable from the server-side. It seems only to be able to be set using a client application.
Example 1: spbulkdocumentimport
http://spbulkdocumentimport.codeplex.com/wikipage?title=Features&referringTitle=Documentation
Example 2: implement a custom webservice
http://blog.orbitone.com/post/Preserve-created-and-modified-information-when-importing-a-document-in-SharePoint
How do you deal with this customer requirement?
Open for discussions
Sven

Hi,
Newbie to SharePoint, learn quite a lot from the links you provided.
“I found out that the original dates are only available in SharePoint if the explorerview has been used”, this would make sense because the original creation time is generated
by the file system in the local machine.
However, when a file is uploaded to SharePoint library, it will be stored as binary data in the database, as well as the newly created time. It means that it will be a “new” file
in the SharePoint site regardless of where it comes from.
Per my knowledge, the only way I can suggest is that you will need to create a client desktop application for the file uploading, which will be a more general way not only for
uploading a file, but also when we need to migrate files between different systems.
Thanks

Find All INSERTs and UPDATEs

Hi All;
I want to find out all inserts and updates of a spesific table. For instance a package l,ke that
CREATE OR REPLACE PACKAGE BODY param_test IS
PROCEDURE ins_test IS
BEGIN
insert INTO parameter_value VALUES (2);
    INSERT INTO parameter_value VALUES (9);
    INSERT INTO
    parameter_value VALUES (4);
    insert INTO parameter_value VALUES (54);
END ins_test;
END param_test;I am querying user_source view. My query is below.
Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
Connected as SYS
SQL> SELECT us1.NAME, us1.line, us1.text
2    FROM user_source us1,
3         (SELECT us2.line, us2.NAME, us2.text
4            FROM user_source us2
5           WHERE regexp_like(upper(us2.text), '[[:space:]]*PARAMETER_VALUE[[:space:]]*')) us3
6   WHERE us3.line - 1 = us1.line
7     AND us1.NAME = us3.NAME
8     AND regexp_like(upper(us1.text), '[[:space:]]*(INSERT[[:space:]]*INTO|UPDATE)[[:space:]]*')
9 /
NAME                                 LINE TEXT
PARAM_TEST                              9 insert INTO parameter_value VALUES (2);
PARAM_TEST                             12     INSERT INTO
SQL> My question is "Are tehre any solutions to overcome this situation?"
Kindly Regards...

You might be better off combining into your attack the use of user_dependencies. This will tell you what objects e.g., code is dependent on your table and then you can search the source of those modules for inserts and updates into the table. Even then you'll never be sure, especially if dynamic SQL is used as the statement may be pieced together from various bits if strings, as then user_dependencies won't contain the reference.

Finding Plant Creation and Updation Date

Similar Messages

Maybe you are looking for