Finding segment

Using V$active_Session_History i found the db file sequential read. please tell me the query from where i found the segment name against block
Thanks

select segment_name
from dba_extents
where file_id=<p1>
and <p2> between block_id and block_id + blocks - 1

Similar Messages

  • How to find segments for DB table fields?

    Hi,
    Please tell me how to know segments for perticular DB table fields.
    We can search it manually by looking into the IDoc segment fields
    But let me know if any other method is there?

    Hi Suman,
    Go to WE30(Enter Idoc type , click display button) , it will display list of segments, from there we can find the table fields.
    Regards,
    Vijay

  • GL: API/Function name to find Segment Value.

    Hi All,
    We have two ledgers defined in EBS, Primary and Secondary.
    Primary has different Char of Account Mapping setup compared to Secondary Ledger.
    My requirement is that based on Primary Ledgers segment values i need to find out corresponding secondary ledgers valid segment values.
    I can build the queries to do that. Just want to know if there is built in function or APi is available which I can use to derive segment values.
    Thanks.

    HI,
    Try with transcation Code WE41
    Thanks
    Kalyan

  • FM to Find segment name based on material class type

    Hi Experts,
    is there any function module availble to find out the segment name based on material class or material class type?
    Please use a more informative subject line in the future.
    Edited by: Rob Burbank on Feb 17, 2009 10:33 AM

    HI,
    Try with transcation Code WE41
    Thanks
    Kalyan

  • Cannot read old emails - subject visible but not content - but search finds segments of content - suspect problem during compaction? Can content be recovered?

    Older emails are no longer readable. The subject header is there, but email content is blank (white). Interestingly, if I search for a keyword it will find the keyword within 'blank' messages, suggesting that the data is still there, just hidden in some way.
    Is there any way of recovering the message text and associated attachments?

    This is a symptom of folder corruption. You can right click the folder and select Properties, then Repair Folder.
    I doubt you get all, if any of the messages back.
    Read this about maintaining your email folders to help prevent this in the future.
    http://kb.mozillazine.org/Keep_it_working_-_Thunderbird

  • There's a problem i find it when i get Training in oracle Applicaltion 12

    When i get Training In how to setup GL , & after i make a new GL , then i create new user and added this new GL In this new user , approximately after this step - I find a problem as a follow ,
    before the problem : Setup - Financial - Flexfield - Key - ( Segment - or Values )
    After the problem : Setup - Financial - Flexfield - Key - ( Accounts )
    you notice that i can't find segment or value
    If there's any solution Pls. reply me because this problem appear for me from 2 weeks
    reference : www.solutionbeacon.com --- this site i trained on it
    Thanks for all

    We can't know. You have not told us what error there actually is nor provided any proper system information or other technical details.
    Mylenium

  • BAPI to build target group for segments

    Hi all,
    I looking for a BAPI that builds target group for segments and not for profile sets.
    Transaction CRMD_MKTSEG allows to create TG in two ways :
    - Build for Profile SET
    - Build for Selected segment
    BAPI_TARGETGROUP_CREATE is like u201CBuild for Profile SETu201D, since it requires a profile set guid as input
    I have not found anything to u201CBuild for Selected segmentu201D, putting as input only a Profile.
    The reason is that I need to "refresh" every day the target group and it is possible only if I create a TG for segment and not for profile set. In this second case the TG is frozen and no more refreshable,
    Thanks.
    regards
    Emanuele

    Hi Emanuele,
    There are three types of Segments:- Profile Sets, Target Groups, Profiles. 
    (You can check this yourself:- Go inside Find segments, then choose Advanced Search. You will get option to find Marketing Segments based on whether they are Profile sets or Target Groups or Profiles )
    It means Profile Sets is also a type of Segment. So i am bit confused with your question.
    If i understand your question correctly, you simply want to create a target group which should be refreshed automatically on a daily basis.
    You can very well achieve this daily refresh by building the Target Group in Background Mode. While creating a Target Group there are two modes possible :- 1)Build Target Group in Dialog Mode 2)In Background Mode.
    So u need to build your Target group in background mode and While creating the Target Group in Background mode:-
    Select the Checkbox "Active"
    Do not select the checkbox "Modelling Completed".
    Hope this helps in resolving your issues.
    rgrds,
    Randhir

  • Is it possible to edit spoken dialog without interfering with the rest of the sound?

    I'm trying to piece together video clips from various movies, and in one of these clips the character swears strongly a couple times. Normally, I don't bother with this, but my audience is that of a "clean" nature and is strongly against profanity. Is there a way to briefly mute, or change the character's voice when he cusses and not interfere with the rest of the sound? Or is this asking too much?
    Also, I looked in the "help" section and couldn't find anything to help me with this. But I have a bunch more questions. Where do I go that will explain all the features of Premiere Elements 8, without forcing me to spend hours figuring it all out and/or posting a billion discussions here in the forums and bugging all of you with my lack of knowledge?

    What you are attempting to do requires a bit of work and then some luck.
    It sounds as though you have an Audio Clip with both background noise and possibly music, plus dialog. You wish to remove just the dialog in a particular spot, or spots. Is that correct?
    If so, then in an Audio editing program, like Adobe Audition, you can possibly extract the ambient sound/music with a Karaoke Effect, or with the application of EQ. This will yield a separate file with hopefully just the background and music, and no dialog. In a Multi-Track Session, place both files on a separate Track. Find the point where you wish to remove the dialog. Here, the workflow might differ, but I'd Cut out the dialog at that point, leaving only the Karaoke Track. To clean things up, when I had done this for each offensive passage, I would go to the Karaoke Track and do just the opposite - Cut out all that was NOT underlying the offensive passages, but leave a bit of that Track before and beyond the deleted dialog. Then, I'd add a Cross-Dissolve for Constant Power to those Karaoke segments to "ramp" the Karaoke Track into the mix, as it will never be perfect, and one wants as smooth a transition, as is possible.
    Now, one can do this in other audio editing programs, that offer Multi-Track editing, and also VST plug-ins, or install with Effects like Karaoke and/or Parametric or Graphic EQ's. You could explore the great, free audio-editor, Audacity, and Google for VST's that will enhance its capabilities. Be sure to read the Help files on Audacity, as one does need to do a few things in setup to allow the addition of more VST's.
    The work will be with the Karaoke (or similar) Effect, its result and also the frequency ranges of the speaker. That is where the "luck" comes in. Much human speech can be EQ'ed out, or at least greatly attenuated. Now, if you have a crowd talking in the background, or similar, and wish to retain that, all bets are off.
    Also, if you only have ambient sounds, and no music, behind the speaker, just find segments of that ambient sound, where the speaker is not talking, and use that to "patch" where you cut out the dialog.
    Good luck,
    Hunt

  • 0GLACCEXT hierarchy nodes description not displaying

    Hi Gurus,
    Dear Moderator , Please close / delete this thread , I've posted this thread in EIM >> EDW >> General *
    Edited by: Nehabibo on Dec 14, 2010 4:40 PM
    Edited by: Nehabibo on Dec 14, 2010 5:17 PM

    Hi Ganesh,
    Please follow below mentioned steps to to get correct values in Balance sheet report ie for Assets and Liabilities.
    Double click on Transfer Rules of 0GLACCEXT (Hierarchy)
    Check Below mentioned fields are mapped correctly or no
    0HIENM  -
    HIENM
    0HIER_VERS----
    VERSION
    0DATETO----
    DATEFROM
    0DATEFROM----
    DATETO
    next Pls follow below mentioned steps carefully
    In the same screen First u can see Info source----
    0GLACCEXT
    Next You can find Segment -
    Hierarchy Header just beside that you will find  small symbol pls click on that and select Hierarchy Node and pls map fields as below
    0HIER_NODE----
    NODENAME
    SIGNCH----
    RSIGN
    0BAL_DEPEND----
    PLUMI
    0GLACCEXT----
    GLACCEXT
    Please map the fields as I have mentioned and load the data and check.
    Regards
    Albaik
    Edited by: albaik on Mar 15, 2010 7:01 AM

  • Scripts to identify small tables for keep pool

    I'm sorry for the double posting... seems my browser messed up and I didn't realize it posted already.
    Edited by: ji li on Dec 6, 2012 8:40 AM

    Hi
    Please find below script to find segments less than 1GB.
    select sum(bytes)/(1024*1024*1024) SIZE_IN_GB, segment_name from user_segments where bytes <1073741824 group by segment_name order by 1 asc
    Please try yourself !!
    Regards,
    Anand.

  • IDOC Delvry03 for purchasing document

    Hi all
    This is the scenario
    We recieve from our vendor a shipping notification. I will put this information in idoc Delvry03 but have some problems to post it into R/3.
    Can someone help me to find segment , fields and qualifier i have to put our purchaseordernr and positionsnr in idoc Delvry03. When i run the process through WE19    R/3 dont find this information 
    I have tried E1edl43 and E1edl41
    Hope someone understand
    // S

    Hi KCR,
    Check the Message Type SHPMNT for IDOC types SHPMNT01,02,03,04,05.
    Thanks & Regards,
    YJR.

  • How to find the cost center group from cycle/ segment in CO module?

    Hi All,
    I need to fetch the list of cost centers in the cost center group against the cycle.
    Is there any table which will store the list of cost centers against the cycle?
    or else, what I was thinking is use of BAPI BAPI_COSTCENTERGROUP_GETDETAIL, which will give me the list of cost centers,
    but we need to pass the controlling area + cost center grp to fetch the cost centers from BAPI, I have controlling area with me but not the cost center grp name, only I have Cycle info lke cycle name, segment name, seq number. so how to find the cost center grp name from the cycle name?
    Regards,
    Mrunal

    FM: RK_AL_CYCLE_READ
    CHECK TABLE: T811K

  • How can I find a segment name from p1 and p2 value of v$session??

    Hi, all.
    A session is waiting with "gc cr request".
    The pvalue of the session are as followings.
    p1text p1 p2text p2 p3text p3
    file# 15 block# 412 id# 33619969
    I issued the following sql statement to find the segment name.
    select segment_name
    from dba_extents
    where file_id = 15
    and 412 between block_id and (block_id + blocks -1)
    However, No row returned.
    Is there any mistake??
    Thanks and Regards.

    Hi,
    You will find what the wait means in the Oracle Reference manual.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/toc.htm
    To find out what object P1 refers to:
    select * from v$datafile where file# = file#;
    To find the hot block within that object above do:
    select name, kind from ext_to_obj_view
    where file# = file#
    and lowB <= block#
    and highB >= block#;
    to create a report an example change your variable to what you need
    select
    sess.username,
    sess.sid,
    se.event,
    se.total_waits,
    se.total_timeouts,
    se.time_waited/100 time_waited,
    se.average_wait
    from v$session_event se, v$session sess
    where event like '%buffer busy% <===== change to your choosing
    and sess.sid = se.sid
    and sess.username is not null
    and se.total_waits > 10000
    order by username, sid
    hope this helps.
    al

  • How to find where the segments are get filled.

    Hi friends,
    I want to know, where the segments are getting filled for an IDoc. Actually i have failed IDoc's, in that IDoc the segment E1EDS01 the Qualifier is 009 its having 2 fields one is SUMMID its having value of 009 and another one is SUMME its having the value of 4.124.
    The requirement is this SUMME value is wrong for selected Idocs. How i debug this? I know the partner profile name, basic type and message type. How i will get the proper include name?
    Its an outbound interface.
    Pls anyone advice are help.
    Mohana

    Hi Mohana,
    If you have partner profile, then goto transaction WE20 and search for your message type in Outbound paramters of that partner and double click on it. Then click on the "_Message Control_" tab.
    Process code will be defined there it will direct you to Outbound processing Function module. Then you can find your segment inside include of that Function module. (It could be user-exit also)
    If you cannot find process code there, then look for corresponding EDI Output type which triggers the outbound Idoc and get the program name through transaction NACE.
    Hope this will help you
    Regards
    Saravanan

  • How to check/find the size of current ROLLBACK segment in oracle 10g

    How to check/find the size of current ROLLBACK segment in oracle 10g ? Kindly help

    A rollback segment name like "_SYSSMU231$" is used when you have Automatic Undo Management enabled.
    The only relevant parameters are :
    1. UNDO_MANAGEMENT=AUTO
    2. UNDO_RETENTION=n minutes ==> this is what everyone should be interested in
    3. The sizes of the Undo Tablespace datafiles and whether AUTOEXTEND is ON or OFF
    No one should be interested in the size of a single undo segment when Automatic Undo Management is enabled.
    Possible causes of ORA-01555 errors in Automatic Undo Management
    a. UNDO_RETENTION is too low
    b. Undo tablespace is too small
    Hemant K Chitale

Maybe you are looking for