Finding table used in CJI3 transaction
Hi experts,
I am creating a report to produce the output of cji3 transaction.Getting the input as project or WBS i have to calculate actual amount.
For that i want to know the tables used in this transaction.Please help me..
If any one can tell the tables used this "s_alr_87013558" trancaction is also ok.
Thanks & Regards,
Karthik.
Hi,
After going into any transaction press F1 where you usually enter the value and then you get performance assistant in that performance assistant press the tab technical information......
it will give you the name of the table and also the fieldname of that particular field.
for example :-
In transaction "s_alr_87013558" :-
table field name
For Database prof :- TCNT PROF_DB
Reward if helpful.
regards,
Syed
Similar Messages
-
Table used in the Transaction OOER or External Trainer
Can any body help in finding out the standard tables used in the transaction OOER or To add External Trainder.
Hi,
Below declaration is there in the transaction code.
Hope this helps you.
TABLES : hrvpv6a, "screen parameters Dynpro 2000 / 3000
hrp1000, "database for P1000 (SYS_CHECK_SHORT)
hrp1023, "database for P1023 (Dynpro 4200)
t005t, "country names
t522t, "address-forms
t535n, "name addings
t777a, "show these addresses for buildings
t778p, "#EC NEEDED "allow these planversions
q1023, "help structure for relations
p1023, "help structure for relations
pad21, "help structure for relations
pad22, "help structure for relations
pad31, "help structure for relations
pad77, "help structure for relations
pkeyk, "help structure for cost centers
indx . "database for user settings -
TO FIND TABLES USED IN PROGRAM ?
Hi
How to List all the Tables used in the Report or Module pool Program
I need to find all the tables which is declared and as well as used in the program
any way
I used ST05 transaction , Se49 not available ......
Any Function module available to do this or any tools...........
JudeHi all
the Solution is given as a program
REPORT ztesttables.
DATA line(100) TYPE c .
DATA:itab TYPE TABLE OF line,
wa_tab LIKE LINE OF itab.
PARAMETER program TYPE sy-repid.
CALL FUNCTION 'GET_TABLES'
EXPORTING
progname = program
TABLES
tables_tab = itab.
SORT itab BY line.
DELETE ADJACENT DUPLICATES FROM itab COMPARING line.
LOOP AT itab INTO wa_tab.
WRITE wa_tab-line.
ENDLOOP.
Regards,
B.Jude -
Tables used in fd32 transaction
Hi
here by finding open ordervalue/open delivery value for the customer Vs credit control area used in fd32 transction
i am not able to find tables r view that those values are stored
i need tables / viewHi Irfan,
to find the list of tables and views just GO TO SE80 and give program name SAPMF02C and select the dictonary objects
u shall see all the tables and views related to the transaction.
if u find the information useful plz ack it ....
best of luck !!!
Regards
Ravi -
How to find table used in java based forms
In R12 how can i find table name used in Java Based forms.
Record history for OAF / Selfservice pages is only available in R12.1.1 - pl see MOS Doc 565870.1 (Oracle Application Framework (OAF) Release Notes, Release 12.1.1) - it is not available in 11i and 12.0.x releases.
HTH
Srini -
Final Internal Table used in MIGO Transaction
Hi Experts,
I need to know the final internal table used in the MIGO transaction. Why I want to know this is, I need all the records which are there in the table control (GODYNPRO) of the MIGO transaction. I have used the BADI BADI MB_MIGO_BADI to read the values. But since it is a table control the values are getting changed when the user scrolls down the table control. How can I get all the values shown in this table control. Is there any global internal table in the SAPLMIGO program?
BR.Hi ABAP,
Check the BADI MB_MIGO_BADI the example class CL_EXM_IM_MB_MIGO_BADI
In attributes tab variable GT_EXTDATA contains all migo positions.
Read the internal table to check items.
in this method the internal table is filled.
Therefore define your internal table in the class attributes.
I hope you help. -
TO FIND TABLES FOR MASTER DATA TRANSACTIONS
HI , When we create a customer, the information is updated in structure RF02D and some tables like KNA1 are updated ..
How can we find the tables for master data transactions.?
please reply...
thanks.Hi,
I entered into the TC : ST05, Activated the trace then I created a customer, then I came back and deactivated trace, then I clicked on display it gave me a list ( yellow color list ) ... Wat do u mean by update methods here ...
Thanks
SK SIDDIQUI -
Finding tables used for all modules t code
hi Gurus
I just come accross to one answer that enter T.Code se49 & in that screen enter the T.Codes you want to see teh tables used for that t code.
But when i enter t code se49 the system says it does not exists.
Does it have any varsion problem ? I m working on ECC 6.0
Please let me know if any t code is there for the same.
Thanking u
Santosh RotheHi
i dont think there is a tcode se49, and what exactly are you trying to see here to view tables we have SE12 and SE16
go and put the tables in and it will dispaly...
here is the link which gives you an idea of tables in SAP
http://www.erpgenie.com/abap/tables.htm
hope this helps you
if it helps you, please do assign points
regards
Jay -
Finding tables used by transaction CM29
Hi guys,
I have to create a report with information from transaction CM29 (Planning table SAPPI_G001).
The report must list all orders scheduled for a resource (orders in the 'Resources' area) in a period. My problem is to find the tables where that transaction saves the information. I have used ST05, looked for functions and tried debugging, with no success, so through tables I cannot know when the order is in the 'Resources' area or when it is in the 'Pool' area.
Has anybody worked with it?
I would appreciate any help.
Thanks.Hi,
Please check the following tables:
crhd,
kbed,
kako,
einzkap,
afih,
afpo,
cyafvg,
cyauko,
iloa,
plaf,
pers,
sauf,
tj48,
cyfi2.
Hope this helps.
Thanks,
Srinivasa -
Locate Database table used in Program / Transaction
Hi Friends,
I wanted to know that Is there any standard method which would show all the Database tables/query used in that program/Transaction.
I heard there was Program in 4.6 version as i am unaware of that as well.
Please if anybody can help me on this
ThanksHi,
You can use SQLTrace.
Check this link.
How to know the List of Tables that are updated through a ABAP Program
Kindly reward points by clicking the star on the left of reply if this is useful. -
How can we find tables for master data transactions
hi
could anybody tel.............
when we create a customer the information is updated in structure RF02D
some tables like kna1 are updated.
how can we find these tables..?Hi Kalyan,
This is how you can find any transparent table you want.
1. Put your cursor in any of the fields of the customer screen and hit <b>F1</b> on your keyboard. Next Click on the "<b>Technical Information</b>" icon. Under "<b>Field Data</b>", this would show you for example structure <b>RF02D</b> and field <b>KUNNR</b> (Customer Number), if your cursor was in the Customer Number field. Copy the field KUNNR.
2. Next, open another session and execute transaction code <b>SE80</b>. On the Menu Bar, click "<b>Environment -> Repository Information System</b>". Open up the folder "<b>ABAP Dictionary -> Fields -> Double Click on Table Fields</b>". Paste your Customer Number field name (KUNNR) in the "<b>Field Name</b>" and Execute. This would show you all the transparent tables where the Customer number is stored.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob -
Finding tables used in all the procedure.
Hi,
We have around 2000 procedures in our oracle 9i database.
I want to know which procedures are calling few of the tables eg: emp or dept.
Is there any way I can findout or Is there any tool.
Regards
MMUMake a list of all the packages and procedures and then make a sql file with the following procedure to check their definitions
dbms_metadata.get_ddl
Spool the output in one file and grep for hints. Keep teh track of which packages you want to modify and then modify them.
Hope this Helps
Regards -
Tables used in standard t-code
Hi Experts,
Can anyone tell me how to find tables used in standard transactions.
Thanks,
Swarna.hi,
u can find all tables in DD02l table.
check this program.it will give u all tables used in a program.
so in ur standard transaction goto system - status - program name n execute tht in this report.
*& AS : ALV report to display the dictionary objects
*& (tables/structures/views of all types of delivery classes)
*& used by a program. *
REPORT ZALV_TABLESPROG .
*ALV type pools declarations
TYPE-POOLS : slis.
*Internal table and work area declarations for dd02l and dd02t
DATA : it_dd02l TYPE STANDARD TABLE OF dd02l,
wa_dd02l TYPE dd02l,
it_dd02t TYPE STANDARD TABLE OF dd02t,
wa_dd02t TYPE dd02t.
*DATA DECLARATIONS FOR PROGRAM NAMES
DATA : progname LIKE sy-repid.data : prognames(60) type c.
*Structure for output
TYPES : BEGIN OF ty_output,
tabname LIKE dd02l-tabname,
tabclass(20) TYPE c,
contflag(80) TYPE c,
text LIKE dd02t-ddtext,
END OF ty_output.
*Internal table and work area declarations for output
DATA : it_output TYPE STANDARD TABLE OF ty_output,
wa_output TYPE ty_output.
*Structure for table names
TYPES : BEGIN OF ty_names,
name LIKE dd02l-tabname,
END OF ty_names.
*Internal table and work area declarations for table names
DATA : it_names TYPE STANDARD TABLE OF ty_names.
*data declarations for ALV
DATA: it_layout TYPE slis_layout_alv,
wa_fieldcat TYPE slis_fieldcat_alv,
it_fieldcat TYPE slis_t_fieldcat_alv.
SELECTION SCREEN ************************
PARAMETERS : program LIKE sy-repid.
INITIALIZATION **********************
INITIALIZATION.
START OF SELECTION.
START-OF-SELECTION.
*Select to check if the program exists
select single name from trdir into prognames where name = program.
*If Program does not exist message is thrown
IF sy-subrc <> 0. MESSAGE 'PROGRAM DOES NOT EXIST' TYPE 'I'.
EXIT.
ENDIF.
*Calling FM to get the tables associated with the program
progname = program. CALL FUNCTION 'GET_TABLES'
EXPORTING
progname = progname
TABLES
tables_tab = it_names.
*Check if there are tables in the internal tabel
IF it_names IS INITIAL.
MESSAGE 'DATA DOES NOT EXIST' TYPE 'I'.
EXIT.
ELSE.
*Subroutine to get the table details
PERFORM TABLES_IN_PROGRAM.
ENDIF.
*output display
PERFORM alv_output.
*& Form TABLES_IN_PROGRAM
text
FORM TABLES_IN_PROGRAM.
*To fetch Tables and their features
IF it_names[] IS NOT INITIAL.
SELECT tabname tabclass contflag FROM dd02l
INTO CORRESPONDING FIELDS OF TABLE it_dd02l
FOR ALL ENTRIES IN it_names
WHERE tabname EQ it_names-name.
ENDIF.
*To fetch the texts for the table
IF it_dd02l[] IS NOT INITIAL.
SELECT tabname ddtext FROM dd02t INTO CORRESPONDING FIELDS OF TABLE it_dd02t
FOR ALL ENTRIES IN it_dd02l WHERE tabname EQ it_dd02l-tabname AND ddlanguage = 'E'.
ENDIF.
*If no data is selected throw message
IF sy-subrc <> 0.
MESSAGE 'DATA DOES NOT EXIST' TYPE 'I'.
EXIT.
ENDIF.
*Appending values to the output table
LOOP AT it_dd02l INTO wa_dd02l. wa_output-tabname = wa_dd02l-tabname.
wa_output-tabclass = wa_dd02l-tabclass.
wa_output-contflag = wa_dd02l-contflag. READ TABLE it_dd02t INTO wa_dd02t WITH KEY tabname = wa_dd02l-tabname.
wa_output-text = wa_dd02t-ddtext.
APPEND wa_output TO it_output.
CLEAR wa_output. ENDLOOP.
*modifying the values in the output table for texts
LOOP AT it_output INTO wa_output. AT NEW tabname.
READ TABLE it_dd02l INTO wa_dd02l WITH KEY tabname = wa_output-tabname. CASE wa_dd02l-contflag.
WHEN 'A'.
wa_output-contflag = 'Application table (master and transaction data)'.
WHEN 'C'.
wa_output-contflag = 'Customizing table, maintenance only by cust., not SAP import '.
WHEN 'L'.
wa_output-contflag = 'Table for storing temporary data, delivered empty'.
WHEN 'G'.
wa_output-contflag = 'Customizing table, protected against SAP Upd., only INS all'.
WHEN 'E'.
wa_output-contflag = 'Control table, SAP and customer have separate key areas '.
WHEN 'S'.
wa_output-contflag = 'System table, maint. only by SAP, change = modification'.
WHEN 'W'.
wa_output-contflag = 'System table, contents transportable via separate TR objects '.
WHEN ' '.
wa_output-contflag = 'Delivery class not available '. ENDCASE. CASE wa_dd02l-tabclass.
WHEN 'TRANSP'.
wa_output-tabclass = 'Transparent table'.
WHEN 'INTTAB'.
wa_output-tabclass = 'Structure'.
WHEN 'CLUSTER'.
wa_output-tabclass = 'Cluster table'.
WHEN 'POOL'.
wa_output-tabclass = 'Pooled table'.
WHEN 'VIEW'.
wa_output-tabclass = 'General view structure '.
WHEN 'APPEND'.
wa_output-tabclass = 'Append structure'. ENDCASE. MODIFY it_output FROM wa_output TRANSPORTING contflag
tabclass
WHERE tabname EQ wa_output-tabname.
CLEAR : wa_output , wa_dd02l. ENDAT.
ENDLOOP.ENDFORM. " TABLES_IN_PROGRAM&----
*& Form ALV_OUTPUT
text
FORM alv_output.
*Fieldcatalogue
PERFORM build_fieldcat.
*Layout
PERFORM build_layout.
*Display
PERFORM alv_display.ENDFORM. "ALV_OUTPUT
*& Form build_fieldcat
text
*Field catalogue
FORM build_fieldcat. CLEAR wa_fieldcat.
wa_fieldcat-row_pos = '1'.
wa_fieldcat-col_pos = '1'.
wa_fieldcat-fieldname = 'TABNAME'.
wa_fieldcat-tabname = 'IT_OUTPUT'.
wa_fieldcat-seltext_m = 'TABLENAME'.
APPEND wa_fieldcat TO it_fieldcat. CLEAR wa_fieldcat.
wa_fieldcat-row_pos = '1'.
wa_fieldcat-col_pos = '2'.
wa_fieldcat-fieldname = 'TABCLASS'.
wa_fieldcat-tabname = 'IT_OUTPUT'.
wa_fieldcat-seltext_m = 'CATEGORY'.
APPEND wa_fieldcat TO it_fieldcat. CLEAR wa_fieldcat.
wa_fieldcat-row_pos = '1'.
wa_fieldcat-col_pos = '3'.
wa_fieldcat-fieldname = 'TEXT'.
wa_fieldcat-tabname = 'IT_OUTPUT'.
wa_fieldcat-seltext_m = 'DESCRIPTION'.
APPEND wa_fieldcat TO it_fieldcat. CLEAR wa_fieldcat.
wa_fieldcat-row_pos = '1'.
wa_fieldcat-col_pos = '4'.
wa_fieldcat-fieldname = 'CONTFLAG'.
wa_fieldcat-tabname = 'IT_OUTPUT'.
wa_fieldcat-seltext_m = 'Delivery Class'.
APPEND wa_fieldcat TO it_fieldcat.ENDFORM.
*& Form build_layout
text
*Layout
FORM build_layout. it_layout-zebra = 'X'.
it_layout-colwidth_optimize = 'X'.ENDFORM. "build_layout
*& Form alv_display
text
*ALV output
FORM alv_display.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = sy-repid
i_callback_html_top_of_page = 'HTML_TOP_OF_PAGE'
it_fieldcat = it_fieldcat
is_layout = it_layout
TABLES
t_outtab = it_output.
ENDFORM. "alv_display
FORM html_top_of_page *
FORM HTML_TOP_OF_PAGE USING top TYPE REF TO cl_dd_document. data tstring type SDYDO_TEXT_ELEMENT. tstring = program. CALL METHOD top->add_text EXPORTING text = 'Tables used in the program'
sap_style = 'heading' .
CALL METHOD top->add_text EXPORTING text = tstring
sap_style = 'Heading' .ENDFORM.
r -
How to find the Databse field used in which Transaction
Hi,
I have one query about:
How to find the particular field from the Database table, used in which transaction?
Bottomline: I want to find the LIKP- LIFEX field, used in which Transaction. I know it is related to inbound delivery, but i couldn't find it in which transaction it is.
Thanks in advance.
Jai.Hi Jai,
The field is called External ID which equal to LIKP-LIFEX or RV50A-VERUR_LA (structure).
Path:
Goto -> Header -> Administration -> External ID.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
How to trace the data dictionary tables used in the standard transaction
Dear all,
Help me to trace the data dictionary tables used in the standard transaction "crm_dno_monitor". I need to find the tables where the data are stored.
or
Tell me generally how to find the tables used in the standard transaction.
Regards,
PremHi,
Open the program of that standard transaction in object navigator or SE80..
Then click on the dictionary structures tab..
U can find the database tables used in this transaction..
\[removed by moderator\]
Regards,
Rakesh
Edited by: Jan Stallkamp on Jul 29, 2008 5:29 PM
Maybe you are looking for
-
Problem with distortion in CS5
Hello, I am a total beginner with a very frustrating problem using flash. When I try to rotate an image (using either the free transform tool or the transform panel) the image completely distorts and becomes very pixelated. I have tried everything I
-
Hi. Immediately after installing iTunes a dialogue window appears stating that "itunes was not properly isntalled. if yuou wish to import or burn cds you need to reinstall itunes." This happens even after I complete the installation w/ antivirus disa
-
HP photosmart 8450 card access error
printer won't reset thinks card is in slot but no card there. can't get to go away. printer otherwise functional except for card reader. if i put another card in another slot message use only one card at a time
-
Calendar Widget Safari 1.3 Problem
Hi, I am using the following Calendar widget script .... Image: [IMG]http://img169.imageshack.us/img169/5866/dateof5.gif[/IMG] Link: [code]http://www.totallysmartit.com/examples/calendar/simple.asp[/Code] I am facing a problem with safari 1.3 in this
-
Why "DOESN'T" Firefox open a new Application in a "NEW TAB" Like it used to?
I want a new tab ope for each app. I am using so I can just click on the tab, and continue to work on that app. I "Don't" want to use the "History" and then wait for it to "Reload" that tab!! I want my tabs all open until I close them. Also, why isn'