Finding text based files containing a keyword/pattern... filtering those that match pattern 2... etc.

I'm looking to see if Powershell can help me solve a common issue I come across dealing with a large code base / set of files.
In short I'm very frequently wanting to "grep" for files that contain a certain keyword or pattern... then (recursively) filter that set of files to those that (A) also include or (B) specifically do not include another keyword or pattern.
e.g.
Lets say that I have 300 PHP files that are all somewhere within a folder called "project_files". I'd like to find all files that contain "someInclude.php"... and also contain "specialFunction()"
Can I do this in one pass... e.g. pipe to pipe to pipe? or do I need to collect the list of file names in the first pass, then re-run the sub-query(/ies)
$results = Get-ChildItem -recurse -ErrorAction SilentlyContinue | Select-String -pattern "someInclude.php"
(wrapped code for readability)
...this is where I'm stuck as to where to go next...
Can I iterate over my results? or do I need to write these to a file and read that file back in, searching in each file as I load it?

Ideally I'd like to get an output at the end that is a result for each match with data including the file, the line number where the match was found, and even the line of text itself.
I currently have this working for a single keyword search... outputting the final results object to a CSV file
Get-ChildItem -recurse -ErrorAction SilentlyContinue |
Select-String -pattern "someInclude.php" -AllMatches -CaseSensitive -ErrorAction SilentlyContinue |
Select-Object path,linenumber,line |
Export-Csv "c:\someFolder\MyMatches.csv"
I wrapped the code above for readability... and in the Select-Object
path = full file path
linenumber = the line of the match
line = the actual (full) line of text that was matched
However in all honesty the format doesn't really matter... I just want to find the files that meet my criteria ;-)

Similar Messages

Find text based on its font "Bold"

Hi,
I want to find the content based on its font bold.
I dono the syntax to find conent based on font.
Please any one help me on this.

Hi,
Thanks for your respose. I used the below code as you said, but it shows the below error as in Image.
var myDoc = app.activeDocument;
app.findTextPreferences = NothingEnum.nothing;
app.changeTextPreferences = NothingEnum.nothing;
app.findTextPreference.fontStyle = "Bold"
var boldCont = myDoc.findText();
alert(boldCont.length)
for(var cnt = 0 ; cnt < boldCont.length; cnt ++)
var selCont = boldCont[cnt]
selCont.select();
alert(selCont.contents+"\n"+app.selection[0].paragraphs[0].contents.length);
v

How do I find the Adobe file containing my documents

I am trying to apply for a job and I need my resume located at: https://cloud.acrobat.com/file/ccddd5e7-36ac-4c89-bf43-cd2068d3b344 and the file name is: Robert Half Company, Accountemps Resume 11-19-2014.pdf..... The file name was not accepted when I entered "Robert Half Company, Accountemps Resume 11-19-2014.pdf... How can I retrieve the file through browsing to place as a loaded resume for a job?

Hi Psychedelicferarri,
If I understand correctly, you weren't able to locate a file stored in your Acrobat.com account using the search function? If that's the case, you could try using some of the sort options (click the Sort icon in the upper-right corner, that is a series of three horizontal bars). For example, if you sort by filename, you could browse to the "Rs" to find your resume.
I hope you're able to find your file easily, and that your job application goes well!
Best,
Sara

Help finding JAR files containing a specific class

I Need to find the JAR file containing the java class/type com.sap.engine.frame.ServiceException
<i><b>Frank</b></i>

Hi Frank,
The easiest solution will be searching for class names in Windows search like: Search for files *.jar and contains text xyz.class.
If you find a particular jar then open it using WinZip and you can locate the class file.
Regards,
Ananth

Resulting Word File Contains All Jumbled Text?

Just uploaded and converted my file using ExportPDF. Word file was created without issue. When it is opened all styles are maintained but text is jumbled:
Bo!fnqmpzff!iboecppl!jt!b!nbovbm!uibu!dpoubjot!bo!fnqmpzfsÖt!xpsl!svmft!boe!qpmjdjft/!Ju!dbo!bmtp!dpoubjo!puifs! jogpsnbujpo!uibu!jt!vtfgvm!up!uif!fnqmpzff-!tvdi!bt!uif!cvtjofttÖt!ijtupsz-!jut!hpbmt-!boe !jut!dpnnjunfout!up dvtupnfst!ps!dpnnvojuz/
How do I fix?

Something to be mindful of is the item within our FAQ:
Will Adobe ExportPDF convert both text and formatting information?Adobe ExportPDF is capable of exporting high quality information, but the quality of your Word document depends on the quality of the PDF file you start with. For instance, if your PDF file was originally authored in Microsoft Word and converted to PDF using the PDF Maker functionality in Adobe Acrobat® software, your PDF file contains a rich set of information that can be captured by Adobe ExportPDF. This includes relative positioning of tables, images, and even multicolumn text, as well as page, paragraph, and font attributes. If your PDF file was originally authored using simpler PDF generation methods, such as “print to PDF” or “scan to PDF” options, Adobe ExportPDF will convert any recognizable text and then use sophisticated conversion intelligence to preserve as much of the page layout as possible.
So while we are always trying to improve the service, there are many factors that could be influencing your result.

On file open: "This document contains JavaScript code for a widget that no longer exists."

I had an existing, functional datepicker in a web page.
Recently I downloaded the UI Datepicker in the Widget Browser and installed it in DW CS5. Now every time I load the file that calls the datepicker that I added myself, a warning opens with the following text:
This document contains JavaScript code for a widget that no longer exists. If you don't remove the code, the browser might display JavaScript errors when loading the page. Would you like Dreamweaver to find all instances of this code for you?
Widget: $("#reservDateBegin").datepicker();
Widget: $("#reservDateEnd").datepicker();
Clicking "Yes" opens the file and shows the search box at the bottom of the window with [current document] in File and $("#reservDateEnd").datepicker(); in Matched Text. Clicking "No" just opens the file.
The error is wrong, since installing the widget is what caused the error in the first place!
How can I get DW to stop showing this message?
Thanks for any help.

I do understand you're trying to be helpful. I was just hoping providing the relevant code snippets would be sufficient so I didn't have to take the time to provide a "cleaned" version of the files and upload those to a public-safe location.
Zabeth69 wrote: If you don't understand what 'code at the bottom of the page' means, you have not used one of those systems. I don't know what causes the error code to come up (besides removing a Spry widget, I mean). So if it doesn't apply to you, ignore it.
This is exactly my point: I haven't used any of the DW "systems". I've always manually coded in DW, so I can't have removed a Spry widget in the first place. It wasn't until I installed the Widget using the Widget Browser that I started getting the error (I don't mean adding the datepicker widget to the code using the DW Insert menu - I mean installing the Widget into DW itself). Ignoring such an erroneous/incorrect error seems kind of silly, since every time I open the file I get the error message.
Anyway, as requested, the following are links to the contactUsCleaned.php page, and the php included headerCleaned.php file. Since these use php includes to complete the rendered HTML, they won't look right in the browser, but as you know viewing the source will show the relevant html, javascript, and jquery code. I didn't see any way to upload the files in this forum, which, due to the php code, would be preferable to see exactly what my code looks like...
http://www.eventidewebdesign.com/public/contactUsCleaned.php
http://www.eventidewebdesign.com/public/headerCleaned.php
The footer.php file the contactUs page includes is simply a set of HTML links to the pages on the site, copyright info, and the Google Analytics script. There is no other code in the footer.php file.

Find text in pdf

I need to develop a plugin that search for some text into the document, then when I found a particular string I need to examine the page where the text is found, and I need to export all the page as TIFF and also exporting all text in a text file.
I suppose that I use the PD Layer. Anyone can give me a brief list of the function I have to use?
Alk.

The PDE layer is not recommended for finding text because
* it is not broken into words
* it may not be in reading order
* there is no encoding conversion
This means that you will only sometimes find text based on a simple
scan of PDEText elements.
In reading about AVConversion realise that there are two things being
documented.
1. How a plug-in can provide new formats for conversion to or from
PDF. You do not want this.
2. How a plug-in can use an existing AVConversion handler to convert
to or from PDF. This is what you want.
Aandi Inston

PLEASE PLEASE HELP! finding and locating files..

Hellooo!..
First of all, I'd like to start by saying that i am a DJ and music producer using Logic Pro 9.
..I have just spend the last 5 days organising my whole iTunes, adding albums, renaming, adding artwork and pritty much making sure that everything is bob on and perfect!
So last night i was nearly done and had pretty much completed the organising of my itunes; everything looks cool everything is labelled correctly etc..
This morning, being the absolute TOOL that i am! i (without realising at first) deleted every song in the iTunes Media folder, which i didn't realise was the default file directory for all my music. (i still have all my music files around the laptop they are not deleted, what has deleted are just the copys of the songs that itunes automatically makes and places into the 'Media' folder) Dont even ask how and why i did this or what was going through my mind! just one of those moments i suppose! So still i deepened my problem by emptying the Trash bin so everything had gone.
So.. obviously as you would presume, the dreaded ''!'' appears when i try to play a song and says that it could not find the original file and would i like to locate it? ..after emptying the recycle bin i downloaded some software that restores what you have deleted but this was no use as certain files were missing or corrupt etc so that idea was scrapped.
All of the music in my library IS on my macbook located in various folders a lot are in 'downloads' folder and alot are in another folder named 'Albums from old computer'
So all of my music is on my laptop but i really dont want to have to go through 2689 songs individually to locate them.
when i tried locating one, i found the file and this song was allowed to be played etc but it also popped up with 'Would you like iTunes to use the location of 'song name whatever' to find other missing files in your library?' ..amazed that it came up with this i clicked yes,but no files were found still :S even though many of the files are in the same folder as this song ive just located.. so this option seems to make no sense?
Basically im looking for a way for iTunes to either search the whole laptop for where the song is located or anything else that would allow them to be found and played. The reason i need this to happen is because the whole library is amazingly organised now it all still looks perfect but would also sound perfect too if i could play the effing songs!
I dont know if ive explained this clearley enough or what but i would really really appreciate it if someone could get back to me on this! This is 5 days work gone down the drain!
Thanks,x

Hi, FlyBeatz.
In your iTunes music folder, is there still a file called iTunes Library which has the word "Lib" under the iTunes logo? Normally iTunes has an "iTunes folder" which contains the above and "iTunes library Extras.itbd, iTunes Library Genius [all with lib under the itunes logo] and iTunes Library.xml.
iTunes lib contains the metadata, the info that says album, artist, tracks name. the music folder just has track1, 2 etc and the track name. You need the Lib file to make iTunes display the tracks properly. If this is lost or deleted then its the hard slog.
There is also a folder called iTunes music which contains the audio tracks filed under artist, then album[s].
If the iTunes Lib file is intact then you might be able to import all the music files back into the one folder and have iTunes recognise them as before the great delete. Make sure its the same name, and file structure or 'tunes will get confused. It also puts a lot of stuff into the various artists or compilations folders when it shouldn't, so watch that if you get discrepancies.
You'll need to create a separate folder for each artist, then inside that, create a folder for each album [or track] and copy the audio files into the appropriate location. Then open iTunes and see if it recognises the library correctly.
Warning. If this doesn't work - and iTunes is not a great piece of software for this kind of repair- it could make things worse.
Another option. Do you have time machine enabled? If so, simply reset the computer to a time [say 2 days ago] just before you did the delete. If TM is running automatically, it usually backs up every 30-60 minutes automatically.
I'd also suggest running time machine before attempting my first suggestion in case that solution makes things worse, then you simply restore the machine to its current [somewhat scrambled] state.
Third option is to ring apple tech support and ask for an iTunes expert to help you.
Which you may have already done.
If none or these - or someone else's - solutions don't fix the problem then its the long hard slog.
I've had to do it with over 120G and 200G of wavs more than once thanks to iTunes stupid behaviour, so I know where your at.
Good luck with it fellow Logic Pro user.
Scorpii.

Anyway to Find text and replace with variable FM10?

I've just been informed that the current documentation set I've done will have different versions. I've created a brand variable, but I was wondering whether there was a quick way to find the text I need to convert, then replace it with the variable I've created?
Mark

Unless Fm10 is different than FM7 in this regard, you can copy an instance of the NewBrand variable in the text flow, then do an
Edit > Find/Change
Find [Text:] [OldBrand]
Change [By Pasting]
The usual issue is that each paste is not just pasting the variable, but also pasting the formats of the source instance of the variable. If all instances of the target text are the same format, say "Body", then this is not a problem.
Otherwise, use the [Change & Find] button. Tweak formats as you go.
I imagine that there are aftermarket enhancements for this. In FM10, you might even be able to script it, but it the number of changes is manageable, [Change & Find] suffices.

How can I find an ID file that contains a text...?

I've been working with InDesign for a long time. So, I have a lot of .indd files, from version 1 up to CS3.
I need to find a file(s) that contains a specific text. E.g. the name of a person, that I'm sure is somewhere in my thousands of ID files.
It's impossible to open all the files until I locate that text.
In Windows Explorer, there's a way to search a word or phrase in a file, but it only returns doc, txt, rft, and other text files, even pdf. But not indd.
Can somebody help me, please?
Thanks,
Hirao

Have you tried changing the extension on your .indd files to .txt? It's
a binary format, but there's a lot of plain text in there. The name
you're looking for, or part of it, is probably in there somewhere.
Search for the shortest possible text string. Some words are not continuous.
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Howto find file containing text on Mavericks 10.9

Can I search *.java files containing text "Navigator" starting at a specific folder searching all sub folders as well.
I have tried with Finder and with EasyFind with no luck.
Cheers
keimo

If all of the files exist in a convenient parent folder the solution is simple. Open the parent folder. The window has a search bar - type the search and press return. Now you should see a grey Search bar to select a folder - This Mac is selected by default. Click on the Parent folder name to restrain the search to this folder. This doesn't let you filter out folders within the parent but it is better than searching the entire drive.

How to find out duplicate record contained in a flat file

Hi Experts,
For my project I have written a program for flat file upload.
Requirement 1
In the flat file there may be some duplicate record like:
Field1   Field2
11        test1
11        test2
12        test3
13        test4
Field1 is primary key.
Can you please let me know how I can find out the duplicate record.
Requirement 2
The flat file contains the header row as shown above
Field1   Field2
How our program can skip this record and start reading / inserting records from row no 2 ie
11        test1
onwards.
Thanks
S
FORM upload1.
DATA : wf_title TYPE string,
lt_filetab TYPE filetable,
l_separator TYPE char01,
l_action TYPE i,
l_count TYPE i,
ls_filetab TYPE file_table,
wf_delemt TYPE rollname,
wa_fieldcat TYPE lvc_s_fcat,
tb_fieldcat TYPE lvc_t_fcat,
rows_read TYPE i,
p_error TYPE char01,
l_file TYPE string.
DATA: wf_object(30) TYPE c,
wf_tablnm TYPE rsdchkview.
wf_object = 'myprogram'.
DATA i TYPE i.
DATA:
lr_mdmt TYPE REF TO cl_rsdmd_mdmt,
lr_mdmtr TYPE REF TO cl_rsdmd_mdmtr,
lt_idocstate TYPE rsarr_t_idocstate,
lv_subrc TYPE sysubrc.
TYPES : BEGIN OF test_struc,
/bic/myprogram TYPE /bic/oimyprogram,
txtmd TYPE rstxtmd,
END OF test_struc.
DATA : tb_assum TYPE TABLE OF /bic/pmyprogram.
DATA: wa_ztext TYPE /bic/tmyprogram,
myprogram_temp TYPE ziott_assum,
wa_myprogram TYPE /bic/pmyprogram.
DATA : test_upload TYPE STANDARD TABLE OF test_struc,
wa2 TYPE test_struc.
DATA : wa_test_upload TYPE test_struc,
ztable_data TYPE TABLE OF /bic/pmyprogram,
ztable_text TYPE TABLE OF /bic/tmyprogram,
wa_upld_text TYPE /bic/tmyprogram,
wa_upld_data TYPE /bic/pmyprogram,
t_assum TYPE ziott_assum.
DATA : wa1 LIKE test_upload.
wf_title = text-026.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = wf_title
default_extension = 'txt'
file_filter = 'Tab delimited Text Files (*.txt)'
CHANGING
file_table = lt_filetab
rc = l_count
user_action = l_action
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
OTHERS = 3. "#EC NOTEXT
IF sy-subrc 0.
EXIT.
ENDIF.
LOOP AT lt_filetab INTO ls_filetab.
l_file = ls_filetab.
ENDLOOP.
CHECK l_action = 0.
IF l_file IS INITIAL.
EXIT.
ENDIF.
l_separator = 'X'.
wa_fieldcat-fieldname = 'test'.
wa_fieldcat-dd_roll = wf_delemt.
APPEND wa_fieldcat TO tb_fieldcat.
CALL FUNCTION 'MESSAGES_INITIALIZE'.
CLEAR wa_test_upload.
Upload file from front-end (PC)
File format is tab-delimited ASCII
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_file
has_field_separator = l_separator
TABLES
data_tab = i_mara
data_tab = test_upload
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc 0.
EXIT.
ELSE.
CALL FUNCTION 'MESSAGES_INITIALIZE'.
IF test_upload IS NOT INITIAL.
DESCRIBE TABLE test_upload LINES rows_read.
CLEAR : wa_test_upload,wa_upld_data.
LOOP AT test_upload INTO wa_test_upload.
CLEAR : p_error.
rows_read = sy-tabix.
IF wa_test_upload-/bic/myprogram IS INITIAL.
p_error = 'X'.
MESSAGE s153 WITH wa_test_upload-/bic/myprogram sy-tabix.
CONTINUE.
ELSE.
TRANSLATE wa_test_upload-/bic/myprogram TO UPPER CASE.
wa_upld_text-txtmd = wa_test_upload-txtmd.
wa_upld_text-txtsh = wa_test_upload-txtmd.
wa_upld_text-langu = sy-langu.
wa_upld_data-chrt_accts = 'xyz1'.
wa_upld_data-co_area = '12'.
wa_upld_data-/bic/zxyzbcsg = 'Iy'.
wa_upld_data-objvers = 'A'.
wa_upld_data-changed = 'I'.
wa_upld_data-/bic/zass_mdl = 'rrr'.
wa_upld_data-/bic/zass_typ = 'I'.
wa_upld_data-/bic/zdriver = 'yyy'.
wa_upld_text-langu = sy-langu.
MOVE-CORRESPONDING wa_test_upload TO wa_upld_data.
MOVE-CORRESPONDING wa_test_upload TO wa_upld_text.
APPEND wa_upld_data TO ztable_data.
APPEND wa_upld_text TO ztable_text.
ENDIF.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM ztable_data.
DELETE ADJACENT DUPLICATES FROM ztable_text.
IF ztable_data IS NOT INITIAL.
CALL METHOD cl_rsdmd_mdmt=>factory
EXPORTING
i_chabasnm = 'myprogram'
IMPORTING
e_r_mdmt = lr_mdmt
EXCEPTIONS
invalid_iobjnm = 1
OTHERS = 2.
CALL FUNCTION 'MESSAGES_INITIALIZE'.
**Lock the Infoobject to update
CALL FUNCTION 'RSDG_IOBJ_ENQUEUE'
EXPORTING
i_objnm = wf_object
i_scope = '1'
i_msgty = rs_c_error
EXCEPTIONS
foreign_lock = 1
sys_failure = 2.
IF sy-subrc = 1.
MESSAGE i107(zddd_rr) WITH wf_object sy-msgv2.
EXIT.
ELSEIF sy-subrc = 2.
MESSAGE i108(zddd_rr) WITH wf_object.
EXIT.
ENDIF.
*****Update Master Table
IF ztable_data IS NOT INITIAL.
CALL FUNCTION 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
EXPORTING
i_iobjnm = 'myprogram'
i_tabclass = 'M'
I_T_ATTR = lt_attr
TABLES
i_t_table = ztable_data
EXCEPTIONS
attribute_name_error = 1
iobj_not_found = 2
generate_program_error = 3
OTHERS = 4.
IF sy-subrc 0.
CALL FUNCTION 'MESSAGE_STORE'
EXPORTING
arbgb = 'zddd_rr'
msgty = 'E'
txtnr = '054'
msgv1 = text-033
EXCEPTIONS
OTHERS = 3.
MESSAGE e054(zddd_rr) WITH 'myprogram'.
ELSE.
CALL FUNCTION 'MESSAGE_STORE'
EXPORTING
arbgb = 'zddd_rr'
msgty = 'S'
txtnr = '053'
msgv1 = text-033
EXCEPTIONS
OTHERS = 3.
ENDIF.
*endif.
*****update Text Table
IF ztable_text IS NOT INITIAL.
CALL FUNCTION 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
EXPORTING
i_iobjnm = 'myprogram'
i_tabclass = 'T'
TABLES
i_t_table = ztable_text
EXCEPTIONS
attribute_name_error = 1
iobj_not_found = 2
generate_program_error = 3
OTHERS = 4.
IF sy-subrc 0.
CALL FUNCTION 'MESSAGE_STORE'
EXPORTING
arbgb = 'zddd_rr'
msgty = 'E'
txtnr = '055'
msgv1 = text-033
EXCEPTIONS
OTHERS = 3.
ENDIF.
ENDIF.
ELSE.
MESSAGE s178(zddd_rr).
ENDIF.
ENDIF.
COMMIT WORK.
CALL FUNCTION 'RSD_CHKTAB_GET_FOR_CHA_BAS'
EXPORTING
i_chabasnm = 'myprogram'
IMPORTING
e_chktab = wf_tablnm
EXCEPTIONS
name_error = 1.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
****Release locks on Infoobject
CALL FUNCTION 'RSDG_IOBJ_DEQUEUE'
EXPORTING
i_objnm = 'myprogram'
i_scope = '1'.
ENDIF.
ENDIF.
PERFORM data_selection .
PERFORM update_alv_grid_display.
CALL FUNCTION 'MESSAGES_SHOW'.
ENDFORM.

Can you please let me know how I can find out the duplicate record.
you need to split the records from flat file structure into your internal table ans use a delete ADJACENT duplicates comparing fields
split flat_str into wa_f1 wa_f2 wa_f2 at tab_space.

SSIS none text qualifier results in text file containing "_x003C_none_x003E"

There is a bug in SSIS when exporting data from SQL to a comma delimited text file where you specified no text qualifier.
This bug apparently only occurs when you develop the SSIS on a x64 win7 PC and copy the .dtsx file (windows explorer copy/paste) to network path of a x86 SQL server and schedule the job to run from SQL Agent on the same x86 SQL server.
When the SSIS runs, the text file is written out containing text qualifier = "“_x003C_none_x003E".
If you look at "
_x003C_none_x003E", it actually means <none>. x003C = "<" and x003E = ">".
If you go into the SSIS package, double-click in the connection manager section to open the flat file connection manager editor and try to clear the text qualifier removing the <none>,
the <none> value get added back in.
The only work-around is to NOT open the
flat file connection manager editor, but instead make the change using the property window and clear out any value in the TextQualifier field.
Other similar problems occur when you actually want to put a real value in the text qualifier. For explain if you select the double-quote as the text qualifier and copy to a
x86 server and run, you end up with a text file containing the value "
_x0022" around each field instead of a double quote.
In my mind this is a serious bug, I did some research and other people have been having this same issue.
FYI, the SQL server is currently SQL2008 with SP2. I will try to get it updated to SP3/4 this weekend to see that will help.
FYI2, when I am developing the SSIS using VS2008 and my local test/run is done through visual studio on my Dev PC (x64). Everything works fine this way. I do not have a instance of SQL on my machine so I did not test it running from SQL Agent
on my PC.

Todd,
Sorry to revive an older post, but we are currently running into this problem...again, but this is happening on SQL Server 2008 R2 SSIS servers and the corresponding developer machines.
Everything that I'm finding in forums and blogs pretty much points that this is an issue with build mismatches (i.e. one system not being caught up to the server while others are), but I have yet to find anything that really outlines how to properly rectify
the situation and prevent it from happening going forward.
Currently all but our production server (from a server perspective) are exactly the same version numbers (same CU applied).
I can't really speak to all of the developer boxes, but mine matches all but the production server (production is showing a lower number than the expected 10.50.2500.0).
As shown below, what is really odd is the second entry and last entry. Second entry is showing SP1 as the generic identifier, but yet shows Build 7600.
The bottom one shows RTM in the generic identifier, but yet shows Build 7601 Service Pack 1, and the version number isn't the expected 10.50.2500.0.
SQL Server Version
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)   Jun 17 2011 00:54:03     Standard Edition (64-bit)
on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)   Jun 17 2011 00:54:03     Standard Edition (64-bit)
on Windows NT 6.1 <X64> (Build 7600: ) (Hypervisor)
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)   Jun 17 2011 00:54:03     Standard Edition (64-bit)
on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0 (X64)   Apr 22 2011 19:23:43     Standard Edition (64-bit)
on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)

How to get Mountain Lion Spotlight to find text in CSV files?

Does anyone know how to get Mountain Lion Spotlight to find text in CSV Files? Spotlight worked flawlessly with Snow Leopard on my last MAC but with Mountain Lion it doesn't recognize CSV Files. I have researched this extensively and haven't found any solution but I really believe there must be many others who have the same problem. I even contacted Apple's Genius Bar which was of no help whatsoever, they couldn't even tell me why Spotlight wasn't finding text in CSV Files, i.e., function dropped by Apple, bug, etc.
Thru research I found that if the CSV Files are converted to 'Plain Text Files' Spotlight will find text inside of the files but I typically save my spreadsheets as CSV Files and don't want to have to convert them to Plain Text Files just so Spotlight will search them.
I appreciate any help you can give.
Joel

I should have mentioned earlier that I do NOT have any exclusions set under the Spotlight Privacy tab, however, I did move one of the folders that contains CSV Files in then back out of the Privacy tab to try and get Spotlight to index the folder, but to no avail.
I have a second Admin account and tried to find text in CSV Files while in that account, again to no avail. I also tried upgrading to Mountain Lion 10.8.4 to see if it might fix the problem, but no soap.
Below is a screenshot of the Systems Preferences/Library/Spotlight/RichText.mdimporter/ file and I don't even see where Spotlight is setup to find CSV Files on my computer, very confusing but thanks again for your input.

Terminal command to move multiple files containing certain text

Hi all.
Still new to mac so I'm hoping for a softly softly approach.
I have over 300GB of SD versions of HD content just taking up space on my iTunes drive. Now, I realise backing up such a large amount of data is going to need yet another drive (or a huge amount of DVDs!), and at the moment isn't urgent but could be at this rate. I have been trying to use the cp comand to copy all files containing (HD) in the filename into a subfolder so I can easily separate then select the SD versions to backup/delete as needed. I would replace cp with mv once I got it working. However, since the terminal appears to work differently to Windows Command Prompt I've been having difficulty with the wildcards.
How would I write the following:
copy all m4v files in [this directory] that contain (HD) in the filename to [new directory]
I tried
cp *(HD).m4v
cp * (HD).m4v
cp *" (HD)".m4v
and many other permutations but they all kept coming up with no such file or directory errors. Any help appreciated.
edit: would there be a way of writing it as: copy all m4v files in [this directory] that do not contain (HD) in the filename to [new directory]
Message was edited by: HappyTrucker

I find this terminal stuff interesting but also annoying as a newbie trying to get his head around it.
That's where making it a script simplifies it.
Try:
Open TextEdit (Applications->TextEdit) and then: Format->Make Plain Text
Then copy the code below (edit to suit your needs) and paste in TextEdit and save as AnyNameYouWant.command on the Desktop (you can move it anywhere you want later)
#!/bin/bash
find /Volumes/Videos/TV\ Shows/The\ West\ Wing/ -not -name '*(HD).m4v' -exec mv {} /Volumes/Videos/TV\ Shows/The\ West\ Wing/sdversions/ \;
Now, open Terminal (Applications->Utilities), and make AnyNameYouWant.command executable by entering:
chmod u+x Desktop/AnyNameYouWant.command
Now you can just "click" AnyNameYouWant.command on the Desktop to run.
Tony

Finding text based files containing a keyword/pattern... filtering those that match pattern 2... etc.

Similar Messages

Maybe you are looking for