Findout the table name,date and time

Hi friends,
In a database i create a table, but i forgot the table name. I know the date. How can i find out the table in database?

select object_name, created, status
from all_objects
where object_type = 'TABLE'
and owner = <user_name_who_created_the_table>
order by created desc;
Hope this helps.
Raman

Similar Messages

Inserting automatic file name, date and time in Illustrator CS3?

hello all,
is there an option in Illustrator where you could automatically insert inside your file the file name, date and time where it was last created or modified, etc.
I found this option to exist in InDesign, but could not find the same menu in Illustrator. I am using CS3.
help?
thanks a bunch.

Mario,
would you please be so kind to include a reference on your site about the script? As far as I can see, the PutDateandTime.js you are providing here is a copy or a slightly modified copy of the original script that Wolfgang Reszel has provided on our site for about four years.
It is okay that the script is available on your site, but please not without a reference. Thanks.

Getting user name, date and time into 1 field

Hi All,
I have to add a new field in a customising include of AUFK table. This field should have user name, date and time. How do I store all these values in a single field of the table? Please help.

Ok Thanks all. Will try your suggestions. But there is one problem. As i have already mentioned that i will have to display this detail in one field of the table control, The format of display is: user name should be seen above and the date and time separated by space should be displayed below the name. How can i ultimately display this in the table control. Do i have to create 2 different fields (one for name and other for date and time) in the AUFK table or is there any other solution?
Thanks

Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Subject:
Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Settings>General>International.
Set the calendar to "Gregorian". You have it set to Buddhist.

I need to get the Current System Date and time in the format

I need to get the Current System Date and time in the format
*6/24/2009 11:30:29 AM*
How do i do it ?

I seem to be saying this a lot lately.
Google is your friend.
I googled "java current date format" and SimpleDateFormat featured prominently in the results.

What happened to the Get/Set Date and Time utilities from RT 7.1?

I'd like to use the Get/Set Date and Time utilities that were available in 7.1, but disappeared after that. I see that the 7.1 utilites call a dll that does not appear to be installed with LabVIEW RT 8 and later. What do I need to do to use the utilites from 7.1 that do not appear in later versions?

In Labview 8.2 and later there are two directories for vi.lib. settime.dll is located in National instruments\Labview 8.2\Targets\NI\RT\ vi.lib
This is the dll you want to use in order to call it use the same Vi as in 7.1 (RT set date and time.vi) and link it to the correct dll.

Can I get the Requisition Submitted Date and Time in Emails

Can I get the Requisition Submitted Date and Time in Emails
Hi,
Is there a way to get Requisition submitted Date and Time in Service Initiation Emails.

Unfotunately, there is not a namespace that will return Submitted Date for a requisition or service. You can, however, get the start date:
#Requisition.StartedDate# or #Service.Requisition.StartedDate#

How to find the Last modified date and time of a package

Hi,
We need a clarification on how to find the Last modified date and time of a package in Oracle. We used the example below to explain our scenario,
Lets consider the following example
Let A, B be two packages.
Package A calls the package B. So A is dependent on B.
When A is compiled the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS gets updated.
Now there a modification in package B so it is compiled. There is no modification in package A.
Now when the package A is executed the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS gets updated but we did not make any change in Package A. Now we need to find last modified date and time of the package A . So we can not rely on the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS . Can u please tell us any other solution to get last modified date and time of the package A .
Regards,
Vijayanand.C

Here is an example:
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 10:57:32 2004-05-20:10:57:32 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 10:59:04 2004-05-20:10:59:04 VALID
SQL> CREATE OR REPLACE PROCEDURE A AS
2 BEGIN
3 NULL;
4 NULL;
5 END;
6 /
Procedure created.
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 11:01:28 2004-05-20:11:01:28 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 10:59:04 2004-05-20:10:59:04 INVALID
SQL> EXEC B
PL/SQL procedure successfully completed.
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 11:01:28 2004-05-20:11:01:28 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 11:01:53 2004-05-20:11:01:53 VALID
Note that the date under the column 'created' only changes when you really create or replace the procedure.
Hence you can use the column 'created' of 'user_objects'.

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

How to get the latest Change date and time of a M.O. from View VIAUFKST

Hi All,
I want to get the latest date and time of a M.O. from view
VIAUFKST. I have written the query like this...
SELECT AUFNR
         AEDAT " Changed Date
         AEZEIT " Changed Time
    FROM VIAUFKST
    INTO TABLE I_VIAUFKST
   WHERE AEDAT >= W_LASTRUN_DATE
   ORDER BY AEDAT DESCENDING.
but its not giving me right results... Pls help me out on this or suggest me the right approach to achieve the same...As this is very critical issue...
Advance Thanks and Points Gauranteed...
Suresh

> SELECT AUFNR
>          AEDAT
>          AEZEIT
>     FROM VIAUFKST
>     INTO TABLE I_VIAUFKST
>    WHERE AEDAT >= W_LASTRUN_DATE.
>
>   IF NOT I_VIAUFKST[] IS INITIAL.
>    SORT I_VIAUFKST BY AEDAT AEZEIT DESCENDING.
>    READ TABLE I_VIAUFKST INDEX 1.
>   ENDIF.
>
> The above statement is giving me different results...
> such as...
>
> 1. 30/11/2005 19:20:11
> 2. 29/11/2005 22:10:09
> 3. 30/11/2005 20:56:09
> 4. 28/11/2005 23:10:09
>
> by using the above SORT statement i am getting the
> fourth record as the latest, where as it should give
> me the third record....
>
> Please advise,
> Suresh.
Hi Suresh,
The reason why you are getting this result is because the system is interpreting the DESCENDING only for AEZEIT not for both. Change it to
SORT I_VIAUFKST BY AEDAT DESCENDING AEZEIT DESCENDING

Table change date and time

hi experts,
i want to know my table changed or modified date and time.. plz help..
Frequently asked basic question. Please search the web before posting and put a little more effort in framing a question that is understandable for all others.
Locked by: kishan P on Aug 24, 2010 3:08 PM

Hi,
Check the Table: DD02L
DD02L~AS4USER
DD02L-AS4DATE
other way..
thought you want to know who last changed the contents?
If you're lucky then the table is set for "table logging" in the technical settings (SE11), then you can find out via tx SCU3
Hope this will help you..
Regards,
Kiran

Cannot view the detailed Email date and time about the meeting request

Hi,I am unable to view the detailed message and Date and time of a meeting request in the default Email app in my Sony Xperia P mobile. Even when i select the calender it does not defaultly go to the meeting date. I need to manually select the date to see the meeting. I cannot see the meeting details without accepting it.I have seen the better behaviors on HTC One V and Galaxy Nexus where full meeting details including message, Date, time, venue appears in the meeting request message.Is there any setting which needs to be changes or is it the limitation of the phone app.Regards,Pratik Ranjan

Hi Johan,Im also seeing this on my xperia s, ICS. Here's some additional info i have after some testing:Work have Exchange 2010, I have sent calendar invites from outlook 2007 and 2010 clients and it works for the 2007 clients as it automatically adds the meeting details into the body of the request, something it doesn’t do in 2010, so it may be the way the calendar form has changed in 2010. It also works fine when i get an invite from an external person.This however is just adding the text into the body, I too have tested with the HTC One S and Samsung Galxay S3, bith use the stock email and both display the time as part ofthe invite no tin the body of the invite,
In doing the testing I have also found another issue. I have found that it doesn’t inform you of a calendar conflict.ThanksMike

Show the last edit date and time ?

I can't find a way to see the actual date and time of the last edit made. I see where you can sort the view by this in grid mode.
Has anyone figured this out?
Thanks.

You can see it in the Metadata panel with the EXIF or ALL sets. There isn't a way to display it on the image using View Options, however.

BAPI - user last modified Name, Date and Time in SU01 of a Particular User

HI Experts,
After searched a lot in SDN , i am posting this thread,
I want to know any Standard BAPI to give LAST modified User name , time and Date in SU01 of a particular User.
I checked * BAPI_USER_GET_DETAIL* , its giving LAST modified time and Date in SU01, But I want Last modified user name as well.
I have 2 questions related with the above scenario,
1) Which BAPI gives the details of LAST modified User name , time and Date in SU01 of a particular User.
2) Any Table is there to give details of LAST modified User name , time and Date in SU01 of a particular User for a time period ,
For eg : 1 month, if i would have set the time line, it should give the three details .
Regards,
Saravana.S

Hi,
I am not sure, if there would be any BAPI particularly for giving such particular information. Even if you can, you might have to call 2 BAPIs, one for finding the list of such users modified within 1 month eg., and then getting the mod date and mod time.
BAPI_USER_GETLIST - this can be used for searching.. but tricky
then you have to call another bapi for getting the details.
One option is you can create a new Z BAPI using the table and get the results.
Regards,
Amit Mittal.

How can we update the last synchronization date and time..on SUP in sccm 2012 R2

Hi,
Can you any one please guide me how can i update the last synchronization date & time in SUP on SCCM2012 r2 , some how its updated as future date and when ever i try to synch the SUP with disconnected WSUS its shows in the wsyncmgr.log
"Wakeup for a polling cycle " and " Wakeupby inbox drop" and "Wakeup by SCF change"
Thanks
Balaji K

You'll probably have to call CSS on this one as this not normal by any means. The messages you noted above are completely normal but if that's all you are seeing then there's an issue.
Have you reviewed wcm.log and wsusctrl.log?
Jason | http://blog.configmgrftw.com | @jasonsandys

Findout the table name,date and time

Similar Messages

Maybe you are looking for