FIOS 25/25 and wifi access
When I recently moved I had to upgrade to a new plan. There was a new feature I was told about Verizon wifi for notebooks at Verizon locations. I believe there was suppose to be a software download. Does anyone know anything about where to get the download?
Disregard, found the download but it is not compatible with ACER Aspireone AO751H
Thanks anyway
Similar Messages
-
I understand you can use your iPhone4 to connect your laptop to the internet.....is this true and if so how does it work? My Verizon Access Manager just ask for my cell phone number to do this but don't really understand it.
Thanksmjpeters01 wrote:
I understand you can use your iPhone4 to connect your laptop to the internet.....is this true and if so how does it work? My Verizon Access Manager just ask for my cell phone number to do this but don't really understand it.
Thanks
Thank you all for the great input!
I have included some additional information regarding the Hotspot feature for the iPhone 4 for your convenience.
The iPhone 4 is capable of acting as a mobile Hotspot to share its data connection with up to five devices at once over Wi-Fi. It can also function as a modem via USB or Bluetooth. This capability is called Personal Hotspot on the device. See pricing below:
$20.00 monthly recurring charge.
2 GB monthly data allowance applies to all data transmitted (on handset and shared devices) while the mobile Hotspot application is active.
$20 / 1 GB Overage Rate.
This is in addition to the iPhone Data Plan.
Detailed set up instructions for the Hotspot on the iPhone 4 can be found at the link below:
http://support.apple.com/kb/HT4517 -
Simultaneous LTE and WiFi access?
I'm considering getting Verizon 4G LTE service for my MacBook Pro, so I can access the Internet from all over Los Angeles. Assuming the basic service works, I am still worried about a potential problem that I have encountered using the Clearwire 4G service. That is, I want to know that if I am using Verizon LTE at a client's house, can I simultaneously access the client's in-house WiFi network for the purpose of using his printer? ( He has unreliable Internet access from his carrier, but I only want to wirelessly access his printer.) When I used CLEAR, I could only use WiFi or CLEAR at a time, so either I was accessing the Net on CLEAR, with Airport turned off, or I was on Airport WiFi, with Clear turned off. If they were both active simultaneously, CLEAR access failed. Not sure why. CLEAR support says you must turn off WiFi on the lap-top before using Clear. The explanation was vague - either it is because CLEAR is using the same spectrum as WiFi, or because my MacBook Pro wouldn't know which service to use to communicate to the Net or the printer. If this is a spectrum issue for CLEAR, I'm guessing Verizon would not have that problem. Can anybody comment on this?
If not, you should be able to find a printer share app to print across the internet to his printer using your 4G connection.
-
Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
Can I use the new Time Capsule to backup my mid 2010 Macbook Pro?
Yes, if you are asking about using Time Machine to backup the Mac.
Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
You are not thinking of deleting the photos and files on your Mac, are you? If you do this, you will have no backups for those files.
Another concern is that Time Machine backs up the changes on your Mac. At some point, Time Machine will automatically delete the photos and files from the Time Capsule.....you just don't know when this might occur.
In other words, only delete files from your Mac that you can afford to lose. -
I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?
Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.
-
How to disable Wifi and Network access in low level setting for security ?
Hi
New to here
One of our final customer bought imac last months. OS 10.9, SN is c02*******J4i
Since they are security printing, all the necessary ports accessing to outisdes need to be disabled in low level setting(not the ons just like turn on and off ).
The ports including USB storage, Network and WIFI.
I googled and found the following
Open the /System/Library/Extensions folder.
To remove support for USB mass storage devices, drag the following file to the Trash: IOUSBMassStorageClass.kext
Open Terminal and enter the following command: $ sudo touch /System/Library/Extensions The touch command changes the modified date of the /System/Library/Extensions folder. When the folder has a new modified date, the Extension cache files (located in /System/Library/) are deleted and rebuilt by Mac OS X.
Choose Finder > Secure Empty Trash to delete the file.
Restart the system.
I want to confirm this before sending to final user. Since I didn't have mac on hand, just wonder whether there are similar kext files for network and wifi to remove.
Just like step 2 described.
I would like customer to backup these files before permanently removed.
Many thanks
Kevin
<Edited By Host>chiqui wrote:
Is it possible to disable Internet access point and WAP as when I use WiFi some connections to WAP server of my provider are still made and I get charged. I am looking for the option not to delete it entirely from the access point list, but rather disable it as I might need connection when WiFi is not available and I want to be able to enable it as once I delete the server name and setting I won't know it.
Is it possible to do it and how?
You could delete WAP accesspoint. Not all providers (carriers) allow this.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
Hi. My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there
Hi. My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there
-
I am deploying to Afghanistan and I will not have wifi access. I will have a hardline access to internet. How do I sync my apps, newsstand, etc without wifi connection?
About the only other way I can think of is to have a computer with you or use one there, if you can put iTunes on it and download all your new stuff to the computer, then sync your iPad to that computer.
In switching computers you will lose previous content, but, as I understand it anyway, downloaded content will be the same as long as the same apple ID is used. -
a tech company just set up a wifi network in my house and does not use my existing TC; how do I get it in the network to serve as backup for my iMac? (I don't need it as a wifi access point anymore) thanks
Just bridge the TC and plug it by ethernet into the main router.
Bridge in v5 airport utility.
In v6 it is under network.. change it from DHCP and NAT to Off bridge mode.
Turn off the wireless. -
When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, what is the purpose of 3G then? This is really nonsense using wifi + 3G iPad. need help ! Thanks.
The file is too large to download via 3G. There is a 20MB limit with 3G. The purpose of having 3G is that you have internet access everywhere and do not need to be near a WiFi hotspot or network.
Not every single thing that you do every single minute of the day on the iPad involves downloading files larger than 20MB. You can surf the internet all day long sitting out in a park somewhere with 3G - but not with a WiFi only iPad - unless you use a hotspot with it.
Try turning off your firewall and anti virus software while you try to download the iOS update. -
I have a US iPhone 3GS made in 2011. Now in the Philippines I had it unlocked. Now Internet is turned off and no technician can turn it on. I can only use Internet when I have WiFi access. Any ideas?
Please define "I had it unlocked".
If it was not unlocked by AT&T, then it was hacked. Hacked and jailbroken phones can not be discussed here per the TOS. -
Lost wifi access w/ Yosemite, and now ethernet too?
I 'updated' my mid-2010 Macbook Pro to 10.10.1 from 10.10 and my wifi access went from slow to completely non-existent. My wife couldn't get her mid-2010 Macbook Pro updated to 10.10.1 from 10.10 because of a bug: Video of being unable to install 10.10.1 (13 sec) (how sad that one bug prevented another), but her computer can access the internet via ethernet. However, I can't even do that. Is anyone else 'fortunate' enough to have an ethernet jack having that problem? I restarted a few times, etc.
Hi i have a probpem with my WIFI Disconectting only has been happening since i upgraded to Yosemite before that it was fine sometime it goes 5 10 mins then dis connects have to turn wifi off then have to re turn it back on
I am using a technicolor TG587n V3 Router this was supplied to me by Telstra and had been working fine before up graded to yosemite
i am student who stydying so i live on the internet very very annoying when i have to always keep re booting -
I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?
SMS. Deggie, had them check that. After a lengthy discussion with Senior Tech advisor, it appears it is iMessage/Face Time server (they are the same) issue, which will strong arm those into purchasing Data if they use iMessage over multiple devices, as the server registers the phone number associated with apple ID. Not impressed. I put what I've learned here in a simliar thread
https://discussions.apple.com/message/17416082#17416082
and this is what I've put in apple.com/feedback
"iMessage requires internet. SMS does not. iMessage/FaceTime auto logs phone numbers to the iMessage/Facetime server (it's the same server as I've come to learn), this means that when iMessage/Face Time is turned on anyone sending a message through the server to me will only be sent as an iMessage- not when I'm not connected to internet, meaning I will not receive the message as an SMS by default, when I have another device using iMessage (such as MacBook) logged in.
This feature is a problem for me, bottom line, in that iMessage strong arms the consumer (me) into having to buy a data plan that they either do not want, or do not need." -
Iphone 4 wont connect to home wifi but connects to neighbors open wifi. Family members with iphones can connect to the wifi automatically and Mac compiuter in home connects to this wifi and this iphone did connect automaticcally until a few weeks ago. Does not request password when try to connect to own wifi..just says "cant access.". Also cant access the Apple apps store to purchase apps but all other function operate normally. Apple store tech says nothing wrong with phone. It connected to their wifi and coud access apps store from their wifi. This iphone belongs to son who is autistic. I am mother trying to resolve this issue and very frustrated. Have reset router but no change.
Based on the symptoms, your phone is fine, and the Router is the problem. Try http://support.apple.com/kb/TS1398. Specifically the "forget this network" step. I would also consider resetting the wifi network password. Sometimes that will allow a connection.
HTH -
Lenovo Yoga 2 13, Kali Linux 1.0.7, Ubuntu 14.04, Windows 8.1 install, config, and wifi fix.
Lenovo Yoga 2 13, Kali Linux 1.0.7, Ubuntu 14.04, Windows 8.1 install, config, and wifi fix.
I wanted to share an experience with everyone I hope will help others avoid what I have gone through the past 3 days. I bought a Yoga 11s that I loved but had some issues with the wireless, Lenovo being awesome replaced it with a Yoga 2 13. I love this laptop but ran into some issues with Linux install/wireless, which I wanted to show how to resolve in one place. Hopefully this will help someone else get through this quicker
I am going to try and write this for someone with little Linux experience, if I miss the mark please let me know and I will clarify the best I can.
For work I need Windows 8.1 and Kali Linux, while for home I prefer Ubuntu.
My Yoga 2 13:
I5 1.6 ghz
8 GB ram
256 GB SSD
ORANGE!
My requirements:
I need Windows
I need Kali Linux (livecd, even with persistent mode was not an option as it would not save the wireless fix or system updates) – I would also like this on a USB drive and not the internal SSD
I would like Ubuntu
Needed to do this:
1. 2 USB thumb drives (at least 8gb in size each) I used 2 Leef Supra 32GB drives. They are my favorite right now and are only about $27 at amazon.
2. Phone that can USB Tether or a USB Ethernet card (External USB wireless will show as "Hardware Locked"). Again you can pick one up for sub $10 if you need the USB Ethernet route. I used my Galaxy S5, you will need to download 200-300 mb of items through this so make sure you have the data if you go that route.
3. You may be able to get a USB wifi card to work if you do the following after boot. This only worked once for me.
a.Type ‘sudo rmmod iwlmvm’
b.Type ‘sudo rmmod iwlwifi’
4. ISOs of Ubuntu and Kali Linux (I used Ubuntu 14.04 and Kali Linux 1.0.7)
5. Software to unzip the ISOs. I recommend 7-ZIP and will be referencing this in this guide.
6. I will include the EFI boot files and the WiFi fix files if I can attach. Otherwise I will provide a link to them.
Link: https://www.dropbox.com/s/puxnnoft3gn2b6l/WiFiFix.zip
Recommended (these are just in case you corrupt something making your system not see any OS
1. I would call Lenovo beforehand and get a set of recover disks (this will take 2-3 days)
2. In the meantime a USB Windows 8.1 or 8 ISO (the repair feature may save you)
*Note: At many points in this guide I detail steps and commands. Please double check that you understand the step before proceeding. There are multiple points where a mistyped command or clicking the wrong option will cause your entire system to fail and you will need to reformat the entire drive and start over. This also will make One Touch recovery not work. Proceed with caution.*
I did not need to disable ‘secure boot’ to do this, but keep in mind that you may need to.
Steps:
First let’s go through the installs, and then we will go through grub config and wireless fix
1. In Windows scroll to computer and right click, select manage.
2. Go to “Disk Management”
3. Select the main HDD (notice Lenovo puts a stupid number of partitions on here)
a. I deleted the D: drive on here, if you do this make sure to copy the drives over to your main C: drive. You will want to run each of the installers and repair the drivers after.
4. I used the space from the D: drive and pulled a little more creating a 50 GB partition for Ubuntu and my swap file
a. You can also add more space by right clicking your C drive and selecting shrink
b. Do not format the partitioned data as this will make identifying it later much easier.
5. Open a command line
a. Swipe from the right of the screen and select search
b. Type ‘cmd’
c. right click and select ‘run as admin’
6. For Ubuntu: Type ‘diskpart’ into the command line
a. type ‘list disk’
i. You should see 2-3 disks depending on if you have one or both usb drives in the laptop at the time. I would suggest only doing 1 at a time so you don’t lose track.
b. type ‘select disk $’ (Replace the $ with the number of the drive)
c. ***** Before proceeding make sure you have the correct drive selected or you can ruin your Windows install and Lenovo one touch recovery will not fix it since we have changed the partitions *****
d. type ‘clean’
e. type ‘create partition primary’
f. type ‘active’
g. type ‘format fs=fat32 quick’
h. type ‘assign’
i. type ‘exit’
6. For Kali Linux: Type ‘diskpart’ into the command line
a. type ‘list disk’
i. You should see 2-3 disks depending on if you have one or both usb drives in the laptop at the time. I would suggest only doing 1 at a time so you don’t lose track.
b. type ‘select disk $’ (Replace the $ with the number of the drive)
c. ***** Before proceeding make sure you have the correct drive selected or you can ruin your Windows install and Lenovo one touch recovery will not fix it since we have changed the partitions *****
d. type ‘clean’
e. type ‘create partition primary size= 3272
f. type ‘active’
g. type ‘format fs=fat32 quick’
h. type ‘assign’
i. type ‘exit’
j. By doing this we can maintain a portion of this drive as the install CD and still have linux install/ liveCD if we need to run it on another machine.
7. At this point the drive is ready to have the contents of the ISO copied over.
8. Right click the ISO and select 7-zip then ‘zip to /’ This should unzip the ISO to the location of the ISO into a folder named exactly the same as the ISO.
9. Once this is done for Ubuntu ISO it is done
10. Kali requires a little bit more to be ready
a. Kali will need some files added for EFI boot. --$--
i. Thanks to: https://forums.kali.org/showthread.php?271-How-to-EFI-install-Kali-Linux
ii. EFI files are located within the wifi fix folder https://www.dropbox.com/s/puxnnoft3gn2b6l/WiFiFix.zip
11. Now let’s start with Ubuntu
Ubuntu install
1. Place USB drive into the laptop and press the “Lenovo boot” button next to the power button
2. Select ‘Boot Menu’
3. Select ‘EFI USB Device (Name of drive)’ Mine stated Leef Supra
4. Select ‘install Ubuntu’
5. Go through the Ubuntu install until you get to select the install drive
6. Once you get to the install portion it will ask you to select from one of 4 options. Select ‘Manually select partition’
7. Select the “Free Space” where we opened up some of the drive
8. You will need to create 2 partitions, I usually create the swap partition at the end of the drive
a. First I create the swap
i. Set at the end of the drive
ii. Set size to 1024 mb
iii. Set type to ‘swap’
b. Second create the ext 4 partition
i. Set to beginning of drive
ii. Set to remainder of the space
iii. Set type to ext4
iv. Set mount point to /
9. Finish the install and boot into Ubuntu
10. You will notice that your wireless is ‘disabled by hardware’ This is fine for the time being and we will worry about this after the kali install. If we fix it now for some reason after installing kali we get the error again and would just need to fix it again.
Kali Linux install
1. Place USB drive into the laptop and press the “Lenovo boot” button next to the power button
2. Select ‘Boot Menu’
3. Select ‘EFI USB Device (Name of drive)’ Mine stated Leef Supra
4. From the grub menu select ‘install kali linux’ both graphical and text work. I much prefer text install
5. You will get a few errors through the install but that is fine
6. The first we see is about network hardware and ‘load missing firmware from removable media?’ – Select ‘no’
7. Then select no ethernet card
8. It will have you name your machine then it will ask you for the root password
a. If you want to just use root *not recommended* place the password here
b. If you wish to use a non-root account then leave these blank and it will ask you for a name, username, and password of the new machine *Very Recommended* - this will also add this user to the sudoers file
9. It will then ask you to ‘partition disks’
10. Select manual
11. Now here is where it can get a little confusing so read twice click once
12. Select the USB drive from this list
13. Mine shows up under (sdb) – Leef Supra
a. It could be sdc, sdd, sde, etc… depending on how many drives you have plugged in.
14. You should see one primary drive that is 3gb or so that is formatted as FAT32. – DO NOT TOUCH THIS PARTITION!
15. You should see the remainder of this drive as ‘FREE SPACE’ select that
16. Create a partition at the end at size 1024mb and swap
17. Then create another one for the remainder of the drive and set it to ext4 with mountpoint of /
18. Continue through the install after you should see an error warning you that ‘you may not be able to boot’ that is fine, select continue
19. Then select from the menu of all the options ‘continue without bootloader’
20. It should finish up then reboot on its own.First setup/boot/fix grub
1. You should be able to boot up into GRUB2 menu now.
2. You may not see kali linux in this menu (make sure you have your towel and don’t panic!)
3. Boot into Ubuntu
4. Once you log in you should see that you still cannot use wireless due to being locked by hardware
5. This is expected
6. Let’s fix grub then we will come back to fixing wireless
7. Plug in your device to connect to the internet (USB Tethering or USB Ethernet)
8. Once you verify that you now have an internet connection run the following from terminal
a. ‘sudo add-apt-repository ppa:danielrichter2007/grub-customizer’
b. ‘sudo apt-get update’
c. ‘sudo apt-get install grub-customizer’
9. You can also edit the grub.cfg manually if you know what you are doing… I did not
10. Open grub customizer
11. It should auto populate and you should see ‘debian (kali linux)’ somewhere in the list
12. It should be mounted to /dev/sdb2 or /dev/sdc2 depending on how many devices you have
13. At this point go ahead and save
14. Reboot and test that you can get into each OS
15. This is where my inexperience got me. I spent 2 of my days so I am including this error: If when you boot into Kali you get an error somewhere that says ‘/bin/sh: can’t access tty: job control turned off’ look above it for an error that looks similar to ‘ALERT! /dev/sdc2 does not exist. Dropping to a shell!!’
a. That error is due to the mount point being incorrect in grub, reboot and from within grub highlight the kali boot. Press ‘e’ then towards the bottom you should see ‘root=/dev/sdc2’ change this to ‘root=/dev/sdb2’ again the number doesn’t matter just make sure it stays the same.
b. Press F10
c. If this boots fine then you will need to go back and fix the grub.cfg or load into Ubuntu and open grub customizer again, it should fix this
16. Now you have 3 working OS on the machine with one being on a USB! Congrats!
17. You can remove the USB with no worry of screwing up your install, but you will not be able to boot into Kali Linux until you replace it. I would suggest only removing it and replacing it while the machine is powered off, but that’s just me.
Fix Wireless
Now is the time to do what probably ¾ of you came here for. FIX THE DANG WIRELESS. This is a huge problem from Lenovo’s side that I hope they realize how important Linux is and will fix. I won’t hold my breath though.
Log into Ubuntu : This is well documented in the following forum post on page 3 by user Haohe:
http://ubuntuforums.org/showthread.php?t=2215044&page=3
His has you download quite a large file, mine should be much smaller.
https://www.dropbox.com/s/puxnnoft3gn2b6l/WiFiFix.zip
1. Download the attached package with the fix.
2. Connect your USB internet device (tether or ethernet)
3. Place the packages somewhere easy to access, in this example I will place them under ~/Desktop/WiFiFix
4. Type ‘cd ~/Desktop/WiFiFix/’
5. Now we need to prep the tools we need.
6. Type ‘sudo apt-get update’ – we did this before, but you know, just in case
7. Type ‘sudo apt-get install linux-headers-`uname –r`’ Note around uname-r they are the ` symbol not the ‘ this is located just above the tab on the same key as ~.
8. Type ‘make’
9. Type ‘sudo cp /lib/modules/3.13.0-24-generic/kernel/drivers/platform/x86/ideapad-laptop.ko ~/ideapad-laptop.ko.backup’
10. Type ‘sudo cp ~/Desktop/WiFiFix/ideapad-laptop.ko /lib/modules/3.13.0-24-generic/kernel/drivers/platform/x86/’
11. Type ‘sudo modprobe -r ideapad-laptop’
12. Type ‘sudo modprobe ideapad-laptop’
13. Type ‘sudo rfkill unblock all’
14. Type ‘sudo modprobe -r ideapad-laptop’
15. Type ‘sudo mv ~/ideapad-laptop.ko.backup /lib/modules/3.13.0-24-generic/kernel/drivers/platform/x86/ideapad-laptop.ko’
16. Next we need to blacklist the ideapad module
17. Type ‘sudo echo 'blacklist ideapad-laptop' > /etc/modprobe.d/blacklist-ideapad.conf’
a. The first time I tried this it wouldn’t work. So I did the following
b. ‘sudo touch /etc/modprobe.d/blacklist-ideapad.conf’
c. ‘sudo vim /etc/modprobe.d/blacklist-ideapad.conf’
d. Enter blacklist ideapad-laptop
e. Exit and save
18. Reboot your Yoga 2 13
19. Boot into kali and see if you have wireless, if you do then you are done. If not we will need to repeat this process with one small little change.
Kali Wifi Fix
1. Copy the sources.list from the package provided
2. Replace /etc/apt/sources.list with the included
3. Some of the file path changes but the process remains the same from here.
Congratulations you now have 3 OSes one portable to other machines and working wifi!
Thank you
SirGed
Maybe you are looking for
-
I already have Photoshop, through my CC account, and now looking into buying Edge Reflow. I just can't figure out how much it costs, or even how to purchase. All the links i follow, to purchase, take me to a plan overview, with products that i don't
-
Allow user to enter null parameter?
Post Author: dmcheng CA Forum: General Hello. I'm using CRXI R2. I have set some parameters on a report that are optional for the user, i.e. she do not have to enter values for these fields. However, when the user runs the report, the parameter pr
-
Function to decide whether user is a developer
Hi, I remember there should be a function that simply returns a TRUE/FALSE value based on whether the user is a developer or an end-user. I thought I would find that in the basic guides but I haven't found anything and I can't just remember it. Could
-
SE 6140 Raid 1 + 0 Stripe Size only up to 512kb?
Question, can I set a 1MB stripe size on a SE 6140 array? The storage engineer says the maximum is 512kb.
-
In my little silly game I have some small "stars" faling down from heaven. The stars is made in Flash and rotating. My little monster should avoid this rotating stars but he always get hurted by the area round the star. I can´t get it transparent oth