Fios install service to all the rooms in your house

We have been fios customers for 9 Months now and Originally had just two boxes activated... Now we have decided to add a box to our daughters bedroom.. I ordered the box  set it up and activated it and nothing... Called Verizon and got the answer there is no service in that room.... NO SERVICE!  I have had a previous service through directv and no matter where you go the box installed they made sure that you could have a box in all rooms standard.  So basically  all the rooms in my house have service but one...  Simply hooking a wire to an outlet can't possibly be that hard.  The solution I was given was that I had to PAY ( I already pay 175.00 a month for service)  to have a technician come and hook the wire up...  That is 79 for the tech and 54 for a cable wire I can buy at Bestbuy for 8 bucks.... Im a little peeved.  Not to mention that the underside of our house that is used for storage of our belongings  like a basement.  It is covered in white wire that the previous tech left laying all over our stuff and the ground.. That's  right  didn't staple a dang wire up.  We cannot get into the space with out weaving through a web of wires.  As much as I like Fios... I am a little disappointed in the customer service I received..  Like a shoulder shrug.,... If  they had just told us from the begining  I would have had boxes put in every room to get service hooked up in the whole house.  Anyone else have this happen to them...??? Needless to say  I can't pay 140 bucks for my child to watch cartoons on occasion.  I didn't mind the 5.99 a month.. So I am sending the box back and they will lose out on their money because they didn't do what they should have to begin with..

mcginnmom,
"My contract expires in December after which I will leave for Brighthouse!"
I just switched from Brighthouse because of the frequent disruptions of picture and sound, just like described in the Verizon commercials. Of course, not every BH customer experiences that problem. Just the ones with crappy wiring between them and the head end (like me). And if you have that problem, you can forget about complaining about it; didn't work for me.
I do experience some problems with Verizon that didn't happen on BH, like recording dropouts (black screen and no sound for several seconds). But so far I'm still better off. Knock wood.
If you do switch, ask for a Samsung DVR if your local BH office has them. It's got 40 hours HD recording capability instead of the usual 20.

Similar Messages

  • Hi, I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mail are not receiving. Mail queue showing Connection refused error. Please help me

    I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
    Thanks
    GIRI

    Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

  • I cannot install iTunes.  I get a Windows Error 126 and missing msvcr80.dll.  I've tried uninstalling and re-installing based on all the suggestions, but still have an issue

    I cannot install iTunes.  I get a Windows Error 126 and missing msvcr80.dll.  I've tried uninstalling and re-installing based on all the suggestions, but still have an issue.  I've removed all the services, tried moving the dll files as suggested, but I still have no success.  Spent all day on this issue.  I am running windows 7.

    Sorry to hear this isn't going smoothly for you. Try  Troubleshooting issues with iTunes for Windows updates. You may have seen some of the suggestions here before but is has taken some users more than one attempt.
    tt2

  • Do I need to leave location services on all the time to use the "Find my iPhone" app?

    Do I need to leave location services on all the time to use the "Find my iPhone" app?

    The Find My IPhone app is used to find OTHER lost devices, it does nothing to make your device "findable".  To make it findable, you must turn on "Find My IPhone" in settings. And than you need location services on.  This however does not guarantee that you'll always find it if lost. A thief can set it to factory settings, even remove the sim card. Then it'll be unfindable.

  • I bourgt 10.7 Lion, but i cnt´t install it. All the last updates are downloaded. I see the sign of the lion, but not clear- there stand the download stopped. How can i continue the download?

    i bourgt 10.7 Lion, but i cnt´t install it. All the last updates are downloaded. I see the sign of the lion, but not clear- there stand the download stopped. How can i continue the download?

    In that case, drag the Lion installer from your application folder to the trash. Empty trash. Now press option key and click on 'purchased' tab. The button next to the Lion installer now should say 'install' click on that to download again.

  • Services of all the databases goes down

    Hi ,
    2 days back, Services of all the databases goes down on one of the PROD server.
    When i tried to start the services using SRVCTL command .
    I was getting the error below.
    oracle@shbaorc07b bin]$ srvctl status database -d EDW
    PRKH-1010 : Unable to communicate with CRS services.
    [Communications Error(Native: prsr_initCLSS:[3])]
    PRKO-2005 : Application error: Failure in getting Cluster Database Configuration for: EDWX
    PRKC-1056 : Failed to get the hostname for node + PRKH-1010 + prsr_initCLSS
    after this error, i came to know that there is some problem with the services.
    When i try to start the crs services, was not able to start the services
    as a root user user,
    I run the below command.
    crsctl start crs
    to my surprise the services of crs was not coming up,
    Finally I have to start the server and all the cluster services came up.
    I want to find out why this was happen, i need to find the bottle neck so this should not happen again as this is a PROD server and lots of prod database are residing on this server.
    Please find crsd.log below.
    2010-04-22 15:38:22.361: [  CRSRES][1539545408]0ora.shbaorc07b.LISTENER_UC4XPRD2.lsnr failed on shbaorc07b relocating.
    2010-04-22 15:38:22.397: [  CRSRES][1539545408]0Cannot relocate ora.shbaorc07b.LISTENER_UC4XPRD2.lsnrStopping dependents
    2010-04-22 15:38:22.407: [  CRSRES][1539545408]0StopResource: setting CLI values
    2010-04-22 15:38:27.318: [  CRSAPP][1539545408]0CheckResource error for ora.shbaorc07b.LISTENER_CTLGPRD2.lsnr error code = 1
    2010-04-22 15:38:27.321: [  CRSRES][1539545408]0In stateChanged, ora.shbaorc07b.LISTENER_CTLGPRD2.lsnr target is ONLINE
    2010-04-22 15:38:27.322: [  CRSRES][1539545408]0ora.shbaorc07b.LISTENER_CTLGPRD2.lsnr on shbaorc07b went OFFLINE unexpectedly
    2010-04-22 15:38:27.322: [  CRSRES][1539545408]0StopResource: setting CLI values
    2010-04-22 15:38:27.336: [  CRSRES][1539545408]0Attempting to stop `ora.shbaorc07b.LISTENER_CTLGPRD2.lsnr` on member `shbaorc07b`
    one more strange thing happen while restarting the 2nd server, the first server also restarted.
    Please help me regarding this?
    Thanks in advance.

    Hi,
    Thanks.
    please find the OS version
    Linux shbaorc07a.corp.shire.com 2.6.18-53.1.14.el5 #1 SMP Tue Feb 19 07:18:46 EST 2008 x86_64 x86_64 x86_64 GNU/Linux
    database version:
    10.2.0.4.0
    Node 2:
    [    CSSD]2010-04-22 19:41:19.438 [1273047360] >TRACE: clssgmCleanupGrocks: cleaning up grock IGDPAXPRDALL type 2
    [    CSSD]2010-04-22 19:41:19.438 [1273047360] >TRACE: clssgmCleanupOrphanMembers: cleaning up remote mbr(1) grock(IGDPAXPRDALL) birth(2/0)
    [    CSSD]2010-04-22 19:41:19.438 [1273047360] >TRACE: clssgmCleanupGrocks: cleaning up grock IGGMCXPRDALL type 2
    [    CSSD]2010-04-22 19:41:19.438 [1273047360] >TRACE: clssgmCleanupGrocks: cleaning up grock IGEASYPRDALL type 2
    [    CSSD]2010-04-22 19:41:19.438 [1273047360] >TRACE: clssgmCleanupOrphanMembers: cleaning up remote mbr(1) grock(IGEASYPRDALL) birth(2/0)
    [    CSSD]2010-04-22 19:41:19.438 [1273047360] >TRACE: clssgmCleanupGrocks: cleaning up grock IGCTRMPRDALL type 2
    [    CSSD]2010-04-22 19:41:19.438 [1273047360] >TRACE: clssgmCleanupOrphanMembers: cleaning up remote mbr(1) grock(IGCTRMPRDALL) birth(2/0)
    [    CSSD]2010-04-22 19:41:19.439 [1273047360] >TRACE: clssgmCleanupGrocks: cleaning up grock IGEDWXPRDALL type 2
    [    CSSD]2010-04-22 19:41:19.439 [1273047360] >TRACE: clssgmCleanupGrocks: cleaning up grock IGNUSBPRDALL type 2
    [    CSSD]2010-04-22 19:41:19.439 [1273047360] >TRACE: clssgmCleanupGrocks: cleaning up grock IGETLXPRDALL type 2
    [    CSSD]2010-04-22 19:41:19.439 [1273047360] >TRACE: clssgmCleanupOrphanMembers: cleaning up remote mbr(1) grock(IGETLXPRDALL) birth(2/0)
    [    CSSD]2010-04-22 19:41:19.439 [1273047360] >TRACE: clssgmCleanupGrocks: cleaning up grock IGCTXXPRDALL type 2
    [    CSSD]2010-04-22 19:41:19.439 [1273047360] >TRACE: clssgmCleanupOrphanMembers: cleaning up remote mbr(1) grock(IGCTXXPRDALL) birth(2/0)
    [    CSSD]2010-04-22 19:41:19.439 [1273047360] >TRACE: clssgmCleanupGrocks: cleaning up grock IGVVC30PRDALL type 2
    [    CSSD]2010-04-22 19:41:19.439 [1273047360] >TRACE: clssgmCleanupGrocks: cleaning up grock IGVUM30PRDALL type 2
    [    CSSD]2010-04-22 19:41:19.439 [1273047360] >TRACE: clssgmCleanupGrocks: cleaning up grock #CSS_CLSSOMON type 2
    [    CSSD]2010-04-22 19:41:19.439 [1273047360] >TRACE: clssgmCleanupOrphanMembers: cleaning up remote mbr(1) grock(#CSS_CLSSOMON) birth(2/0)
    [    CSSD]2010-04-22 19:41:19.445 [1273047360] >TRACE: clssgmEstablishConnections: 3 nodes in cluster incarn 5
    [    CSSD]2010-04-22 19:41:19.449 [1231087936] >TRACE: clssgmPeerListener: connects done (3/3)
    [    CSSD]2010-04-22 19:41:19.449 [1273047360] >TRACE: clssgmEstablishMasterNode: MASTER for 5 is node(3) birth(1)
    [    CSSD]2010-04-22 19:41:19.458 [1231087936] >TRACE: clssgmHandleDBDone(): src/dest (3/65535) size(72) incarn 5
    [    CSSD]CLSS-3000: reconfiguration successful, incarnation 5 with 3 nodes
    [    CSSD]CLSS-3001: local node number 2, master node number 3
    [    CSSD]2010-04-22 19:41:19.458 [1273047360] >TRACE: clssgmReconfigThread: completed for reconfig(5), with status(1)
    [    CSSD]2010-04-22 19:49:20.816 [1189128512] >TRACE: clssnmConnComplete: probe from node 1, your version: 10.2.1.2
    , support PENDINA: 1
    [    CSSD]2010-04-22 19:49:20.816 [1189128512] >TRACE: clssnmConnComplete: MSGSRC 1, type 5, node 1, flags 0x0001, con 0x2aaab01abb00, probe (nil)
    [    CSSD]2010-04-22 19:49:20.816 [1189128512] >TRACE: clssnmConnComplete: node 1, shbaorc07a, con(0x2aaab01abb00), probcon((nil)), ninfcon((nil)), node unique 1271962158, prev unique 0, msg unique 1271962158 node state 0
    [    CSSD]2010-04-22 19:49:20.816 [1189128512] >TRACE: clssnmsendConnAck: node 1, node state 0
    [    CSSD]2010-04-22 19:49:20.816 [1189128512] >TRACE: clssnmConnComplete: connecting to node 1 (con 0x2aaab01abb00), ninfcon (0x2aaab01abb00), state (0)
    [    CSSD]2010-04-22 19:49:20.816 [1189128512] >TRACE: clssnmConnComplete: connected to node 1 (con 0x2aaab01abb00), ninfcon (0x2aaab01abb00), state (0), flag (1037)
    [    CSSD]2010-04-22 19:49:20.927 [1262557504] >TRACE: clssnmDoSyncUpdate: Initiating sync 6
    [    CSSD]2010-04-22 19:49:20.927 [1262557504] >TRACE: clssnmDoSyncUpdate: diskTimeout set to (57000)ms
    [    CSSD]2010-04-22 19:49:20.927 [1262557504] >TRACE: clssnmSetupAckWait: Ack message type (11)
    [    CSSD]2010-04-22 19:49:20.927 [1262557504] >TRACE: clssnmSetupAckWait: node(1) is ALIVE
    [    CSSD]2010-04-22 19:49:20.927 [1262557504] >TRACE: clssnmSetupAckWait: node(2) is ALIVE
    [    CSSD]2010-04-22 19:49:20.927 [1262557504] >TRACE: clssnmSetupAckWait: node(3) is ALIVE
    [    CSSD]2010-04-22 19:49:20.927 [1262557504] >TRACE: clssnmSetupAckWait: node(4) is ALIVE
    [    CSSD]2010-04-22 19:49:20.927 [1262557504] >TRACE: clssnmSendSync: syncSeqNo(6)
    [    CSSD]2010-04-22 19:49:20.927 [1189128512] >TRACE: clssnmHandleSync: diskTimeout set to (57000)ms
    [    CSSD]2010-04-22 19:49:20.927 [1262557504] >TRACE: clssnmWaitForAcks: Ack message type(11), ackCount(4)
    [    CSSD]2010-04-22 19:49:20.927 [1189128512] >TRACE: clssnmHandleSync: Acknowledging sync: src[2] srcName[shbaorc07b] seq[1] sync[6]
    6911,1 99%
    node 1:
    [    CSSD]2010-04-22 18:56:00.996 [1189128512] >USER: clssnmHandleUpdate: SYNC(4) from node(4) completed
    [    CSSD]2010-04-22 18:56:00.996 [1189128512] >USER: clssnmHandleUpdate: NODE 1 (shbaorc07a) IS ACTIVE MEMBER OF CLUSTER
    [    CSSD]2010-04-22 18:56:00.996 [1189128512] >USER: clssnmHandleUpdate: NODE 2 (shbaorc07b) IS ACTIVE MEMBER OF CLUSTER
    [    CSSD]2010-04-22 18:56:00.996 [1189128512] >USER: clssnmHandleUpdate: NODE 3 (shbaorc07c) IS ACTIVE MEMBER OF CLUSTER
    [    CSSD]2010-04-22 18:56:00.996 [1189128512] >USER: clssnmHandleUpdate: NODE 4 (shbaorc07d) IS ACTIVE MEMBER OF CLUSTER
    [    CSSD]2010-04-22 18:56:00.996 [1189128512] >TRACE: clssnmHandleUpdate: diskTimeout set to (200000)ms
    [    CSSD]2010-04-22 18:56:01.008 [1273047360] >TRACE: clssgmReconfigThread: started for reconfig (4)
    [    CSSD]2010-04-22 18:56:01.008 [1273047360] >USER: NMEVENT_RECONFIG [00][00][00][1e]
    [    CSSD]2010-04-22 18:56:01.020 [1273047360] >TRACE: clssgmEstablishConnections: 4 nodes in cluster incarn 4
    [    CSSD]2010-04-22 18:56:01.096 [1231087936] >TRACE: clssgmInitialRecv: (0x2aaab4001310) accepted a new connection from node 2 born at 4 active (4, 4), vers (10,3,1,2)
    [    CSSD]2010-04-22 18:56:01.096 [1231087936] >TRACE: clssgmInitialRecv: conns done (4/4)
    [    CSSD]2010-04-22 18:56:01.096 [1273047360] >TRACE: clssgmEstablishMasterNode: MASTER for 4 is node(3) birth(1)
    [    CSSD]2010-04-22 18:56:01.138 [1231087936] >TRACE: clssgmHandleDBDone(): src/dest (3/65535) size(72) incarn 4
    [    CSSD]CLSS-3000: reconfiguration successful, incarnation 4 with 4 nodes
    [    CSSD]CLSS-3001: local node number 1, master node number 3
    [    CSSD]2010-04-22 18:56:01.138 [1273047360] >TRACE: clssgmReconfigThread: completed for reconfig(4), with status(1)
    [    CSSD]2010-04-22 19:40:00.531 [1231087936] >TRACE: clscsendx: (0x2aaab00fa3b0) Connection not active
    [    CSSD]2010-04-22 19:40:00.531 [1231087936] >TRACE: clssgmSendClient: Send failed rc 6, con (0x2aaab00fa3b0), client (0x2aaab00fa6b0), proc ((nil))
    [    CSSD]2010-04-22 19:40:19.410 [1231087936] >TRACE: clscsendx: (0x2aaab02acd00) Connection not active
    [    CSSD]2010-04-22 19:40:19.410 [1231087936] >TRACE: clssgmSendClient: Send failed rc 6, con (0x2aaab02acd00), client (0x2aaab02ad7c0), proc ((nil))
    [    CSSD]2010-04-22 19:40:19.410 [1231087936] >TRACE: clscsendx: (0x2aaab02ad570) Connection not active
    [    CSSD]2010-04-22 19:40:19.410 [1231087936] >TRACE: clssgmSendClient: Send failed rc 6, con (0x2aaab02ad570), client (0x2aaab02af660), proc ((nil))
    [    CSSD]2010-04-22 19:40:19.438 [1231087936] >TRACE: clscsendx: (0x2aaab0295780) Connection not active
    [    CSSD]2010-04-22 19:40:19.438 [1231087936] >TRACE: clssgmSendClient: Send failed rc 6, con (0x2aaab0295780), client (0x2aaab02859f0), proc ((nil))
    [    CSSD]2010-04-22 19:40:19.476 [1231087936] >TRACE: clscsendx: (0x2aaab029d150) Connection not active
    [    CSSD]2010-04-22 19:40:19.476 [1231087936] >TRACE: clssgmSendClient: Send failed rc 6, con (0x2aaab029d150), client (0x2aaab029dbb0), proc ((nil))
    [    CSSD]2010-04-22 19:40:19.476 [1231087936] >TRACE: clscsendx: (0x2aaab029d890) Connection not active
    [    CSSD]2010-04-22 19:40:19.476 [1231087936] >TRACE: clssgmSendClient: Send failed rc 6, con (0x2aaab029d890), client (0x2aaab029e1b0), proc ((nil))
    [    CSSD]2010-04-22 19:40:19.707 [1231087936] >TRACE: clscsendx: (0x2aaab02cdb30) Connection not active
    [    CSSD]2010-04-22 19:40:19.707 [1231087936] >TRACE: clssgmSendClient: Send failed rc 6, con (0x2aaab02cdb30), client (0x2aaab02cdf60), proc ((nil))
    [    CSSD]2010-04-22 19:40:19.710 [1231087936] >TRACE: clscsendx: (0x2aaab02ca9e0) Connection not active
    please help me on this.
    Thanks
    Edited by: user646034 on Apr 26, 2010 1:13 AM

  • Details of coordinators for all the rooms??

    Hi All,
    I am new to collaboration..I have been trying to get the details (like name) about the coordinators of all the rooms..Then I have to display the coordinator name for all the rooms in the collaboration room directory..
    I can see the coordinators allotted from room-admin page. Is there anyway to get the req. details for all the rooms and show it then...Plz help me...
    Regards,
    Udit

    Hi Udit,
    You can retrieve all rooms by http://help.sap.com/javadocs/NW04/current/km/com/sap/ip/collaboration/room/api/IRooms.html#getRoomsWithPrivacy(RoomPrivacyType) (with the different privacy types), and then for each room call getRoomInfo()  (http://help.sap.com/javadocs/NW04/current/km/com/sap/ip/collaboration/room/api/IRoom.html#getRoomInfo()), from this call getOwnerId() (http://help.sap.com/javadocs/NW04/current/km/com/sap/ip/collaboration/room/api/IRoomInfoReader.html#getOwnerId()).
    Then you can get the owner via http://help.sap.com/javadocs/NW04S/current/se/com/sap/security/api/IUserFactory.html#getUser(java.lang.String) and from this, you can ask any details you want.
    Hope it helps
    Detlev

  • Every time I try to install Adobe Reader, I get error message "object already installed". Tried all the fixes and suggestions.

    Every time I try to install Adobe Reader, I get error message "object already installed". Tried all the fixes and suggestions. I need help.

    If you haved tried all the fixes and suggestions, there is not much to add. Just in case: did you really try using this tool http://labs.adobe.com/downloads/acrobatcleaner.html to first eliminate all traces of Reader, and then use the full offline installer from http://get.adobe.com/reader/enterprise/?

  • If I buy Lion from apps store can I install it on all the Macs I own?

    If I buy Lion from apps store can I install it on all the Macs I own?

    Yes. Each one needs to have Snow Leopard 10.6.8 installed in order to re-download from the App Store unless you make your own USB flash drive installer:
    Make Your Own Lion Installer
    1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the InstallESD.dmg disc image file into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable Lion installer that  you can use without having to re-download Lion.

  • How do you delete all the messages in your search results in Thunderbird 31.2?

    I'm trying to clean out my inbox. When I search for a given term in the global search box and get my results, then I choose "Select All." Then I choose "Move to Trash," and nothing happens.
    How do you delete all the messages in your search results in Thunderbird 31.2?

    I'm trying to clean out my inbox. When I search for a given term in the global search box and get my results, then I choose "Select All." Then I choose "Move to Trash," and nothing happens.
    How do you delete all the messages in your search results in Thunderbird 31.2?

  • Ive followed all the hints on your website i still cannot save any new bookmarks

    ive followed all the hints on your website i still cannot save any new bookmarks, i have a new mac book pro, worked fine no doesnt save bookmarks, verrrrrry annoying!

    Hi eddpie,
    Welcome to the Support Communities!
    I personally would suggest the option to save your iTunes library to an external drive -- because it creates an important backup, and copies the library to your new computer.
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527?viewlocale=en_US
    External drive
    This option requires more work than Home Sharing, but it creates a backup of your iTunes library on the external drive in addition to moving your content.
    Windows operating systems don't recognize Mac OS-formatted disks (HFS or HFS Plus formats). Because of this, you can't use a Mac-formatted iPod or external drive to move your music to a Windows PC.
    Mac OS X can read Windows-formatted iPods and drives. This means there are many ways to migrate your information from your old Windows-based PC to your new Mac.
    Mac OS X: To be sure external drives appear on your desktop, choose Preferences from the Finder menu. Be sure the options for "External disks" and "Hard disks" are enabled.
    Part 1: Locating and consolidating the iTunes Media folder
    Part 2: Copy iTunes folder from the old computer:
    Part 3: Get iTunes ready on your new computer
    Part 4: Back up any music that's already on your new computer
    Part 5: Copy music to your new computer
    Part 6: Add preexisting music that was on the new computer back into the library
    I hope this information helps ....
    - Judy

  • Can we turn off the icon on the lock screen that opens and displays all the photos on your ipad

    I finally noticed the little icon on the lock screen that you can puch and it immediately opens a slide shoew of all the phoes in your library.   I think this is a bit of a security issue -- I dont' wan people being able to look at my pictures wtithout authorizatino from me.   This supasses my permission and lets anyone look at them while the IPAD is still "locked"
    Cn w turn off/disable this icon selection somehow?   I've notobeeen abe to find anything  yet.
    Help!

    There is no security issue. If your iPad is protected by a passcode (which it should be if you don't want anyone to be able to look at stuff) you can turn the slideshow icon off.
    http://howto.cnet.com/8301-11310_39-20103316-285/disable-the-picture-frame-butto n-on-the-lock-screen-of-your-ipad/

  • Win7 install with multiple/all the FAILS! Satellite P750 (PART NO. PSAY3A-02T001)

    Laptop: Toshiba Satellite P750 (PART NO. PSAY3A-02T001)
    Installing: Windows 7 Home Premium SP1 (64 bit)
    Background: Laptop is around 2-3 years old now. Formatting and installing a fresh copy of Win7. Doing this for a close friend.
    Issue #1: Using the "Windows 7 USB DVD Download Tool" off the microsoft website, I attemped to install Win7 via USB drive (had so many issues before using this tool ). It boots to USB perfectly and starting going through the installation options. When it gets to "Where do you want to install Windows?"  (creating and seleting HDD partitions) I hit a major road-block!
    p.s. USB in USB2.0 as I originally tried 3.0 and coudln't even make it that far....
    I get the Error "Setup was unable to create a new system partition or locate an existing systm partition. See the Setup log files for more information." Basically the Primary disk is created but the system disk wont.
    p.s. The HDD still does show up and worked before this all. it's not a failed HDD.
    I've tried (most of these were "Fixes" I found on forums that never worked):
    1. Creating different size partitions, multiple partitions, leaving GB's of "Unallocated Space" hoping it will create a system partition. Didn't work.....
    2. Formating the whole HDD using Command-line and wiping it completely clean. Honestly, this was stupid because now I cannot even go back! Didn't work.....
    3.Changing BIOS settings and praying it will work. Most of the BIOS settings these fixes told me to change, aren't actaully on this Toshiba model. I even restart to default settings. Didn't work....
    4. Even tried a "load Drivers" fix I found. The fix asked for a SATA driver, but I got every driver just incase. Not a single driver even appeared on the "Select the driver to be installed" screen. Unticked the "hide drivers.." box also... So that didn't work either...
    At this point I was pretty mad so I went and purcahsed some DVD-RW's to burn the ISO onto and try that instead.
    Issue #2: Using the same tool as before, I installed Win7 onto a DVD. I then ran the DVD on my PC to test and the setup.exe showed up. I then put the DVD in the Toshiba laptop and using F12 to select "ODD        TSSTcorp CDDVDw TS-L633F" (the other options were "HDD/SSD, USB and LAN).
    p.s. The DVD drive lights up and I can hear it reading the disc (normal slight humm).
    I then get:
    "Intel UNDI, PXE-2.1 (build 083)
    Copyright (C) 1997-2000 Intel Corporation
    This product is covered by one or more of the following patents:
    US5,307,459, US5,434,872, UD5,732,094, US6, 570, 884, US6,115,776 and
    US6,327,625
    Realtek PCI Express Gigabit Ethernet Controller Series v2.35 (06/14/10)
    PXE-E61: Media test failure, check cable
    PXE-M0F: Exiting PXE ROM.
    Reboot and Select proper Boot device
    or Insert Boot Media in selected Boot Device and Press a key_"
    To me, this is the LAN controller boot, but it didn't even read the disk.
    I've tried (and again, most of these were "Fixes" I found on forums that never worked):
    1. Changing Boot priorities and settings. I even tried to disable LAN boot in BIOS (but you cannot on this model). Didn't work..
    2. Yelling at it and holding myself back from hitting it with a hammer. Still attempting..
    3. Praying to a higher power. Didn't work...
    Ideas I have left that may work:
    1. Downloading and burning a different ISO. maybe even trying 32bit. (was 64bit before starting)
    2. Waiting for someone much smarter than me to reply on this post and help me!
    3. Telling my friend that "It's not my problem, while I run off into the sunset!"
    PLEASE SOMEONE HELP! This is doing my head in!
    and yes, I've tried turning it off and on again 

    oh my **bleep**ing god...... I am so mad right now! 95% butthurt infact!
    MY RAGE IS STRONG!
    Just found out off the owner that the DVD drive doesn't work.. 
    SO! The DVD drive doesn't work and it seems like the only way to install Win7. I have a feeling that this model doesn't do USB very well....
    will an external DVD drive work for this? or some I find someone with a toshiba that has the same model dvd drive inside and swap them for an hour while I do it...
    or should I try LAN... havn't one LAN install in a home environment before..

  • HELP! After installing iTunes 7, all the songs on my iPod disappeared!

    I dont know if othe people are having this problem too but it really *****!
    I downloaded iTunes 7 a while back because i had no choice, i wouldnt be able to buy songs/music videos from it if i didnt.
    It installed a new iTunes
    then a new iPod upgrade.
    A day later, i pluged in the iPod.
    It asked me if i wanted to upgrade it with gapless playback because i thought it would save space or something.
    so i put yes, and let it do it over night since it took so long..
    then the next thing i knew when i woke up, is that all the songs on my iPod were GONE!
    I even plugged it back into the computer and iTunes said there were no songs on my iPod! or videos or anything!
    I rechecked everything and it said the iPod was still 98% full (because i had like 4,300 songs on it) and only 2mb of free space...
    I checked iTunes and it said that the things were taking up space were 10% "pics" and 89% "other files".... so i know itunes can see the files there..
    I KNOW THEY'RE STILL THERE!
    CAN SOMEONE HELP ME GET THEM BACK?!?!
    I know it was the gapless playback thing... is there any way to undo it??
    Please... someone help me... i cant just back up all my songs... because i reformatted my computer a while ago too.. so i have no backed up songs... and a lot are from other friends too!
    iPod Video 40GB   Windows XP  

    IF all songs on the ipod are also on the PC
    Just restore the ipod
    If Not on the PC
    You will have to TRY and rep[air the ipods database with yamipod. This way is not full proof, but its the only option you have since you have not backed up http://www.yamipod.com/main/modules/docs/help/corruptedipod.php

  • Does web service support all the properties in the standalone BI console?

    Hi,
    Currently I am using BI web service API to get the report and its parameters and so on. But I find that the object definition in the web service can't be full defined to match the properties in the console UI. For exaple, ReportDefinition object there is no description property, so I can't get the desc by the ReportDefinition object (By now I don't know how to get it). Another sample is, there is no Parameter object defined in the web service, only ParamNameValue object, so I can't get the default value for the parameter defined in the console UI.
    Is there any solution for me?
    HELP!!!

    It is just not working for me. I am using static stub.
    After tracking the HTTP traffic, I found that the WL70 server is not issuing any
    cookie. I have configured all the parameters for tracking session in the web application,
    but I still don't see any cookie in the HTTP headers from the server. I also tried
    to invoke the service using a browser, still no cookie seen. Is this a bug or
    there is some other configuration for the server?
    - Hao
    "manoj cheenath" <[email protected]> wrote:
    By default client will maintain the session. You dont have to set this
    property.
    Are you using static or dyn client?
    Also, you should use the same instance of the stub for all your invokes
    (all invokes to be in the same session).
    regards,
    -manoj
    "Hao Chen" <[email protected]> wrote in message
    news:[email protected]..
    It is not working for me.
    When I set the "javax.xml.rpc.session.maintain" property, weblogicthrows
    "UnsupportedOperation"
    exception and be default I don't see any session information beingpassed.
    How do I configure the client side or even the server?
    Thanks.
    - Hao
    "manoj cheenath" <[email protected]> wrote:
    WL70 client does support http session. Is this not
    working for you?
    regards,
    -manoj
    "Hao Chen" <[email protected]> wrote in message
    news:3d6402ac$[email protected]..
    Does anybody know how to make WL70 Web Service support sessions?
    The "javax.xml.rpc.session.maintain" property on Stub does not seemto
    work.
    Without session support, it is almost no use for us because we haveto
    authenticate
    the user each time.
    Thanks in advance.
    - Hao

Maybe you are looking for