FIOS router drive as a Time Machine backup drive.

I would like to fine out if a hard drive connected to a FIOS router via the USB connection can be used as a Time Machine backup drive. If so can you point me to any instructions if needed. Thanks

Only if you can Mac Format it:
http://support.apple.com/kb/PH18842?viewlocale=en_US&locale=en_US

Similar Messages

WRT1900AC and Apple Time Machine backups

I just bought this router, am getting a 27" iMac running OSX Mavericks, and wanted to put storage on the router to use for Time Machine backups. I have the latest firmware, but, the PC Magazine review of the router stated that it doesn't work with TIme Machine. Is that still true, or will it work now?
Thanks!

I can confirm the WRT1900AC DOES NOT work with a hard drive connected to it's USB port as a time machine disk. I have a 2Tb drive formatted in Mac OS Extended (Journaled) format, which is required by the Time Capsule utility to function properly, and the disc is visible using the SmartWiFi interface. However, when I enter the Time Machine Preferences on my Mac, and select the "Choose Disk" option, the drive does not appear as a option.
This is a terrible shame, since now I have to connect my old Time Capsule in Bridged Mode just to use the backup option on my wireless network. Other than this and a few minor quirks, the router is a stellar piece of equipment.
Hopefully Linksys will address this with a future firmware or once the open source software has been properly developed and this will be a perfect device.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

Ow can I use my time capsule as a time machine backup without using it wirelessly and not as a wireless router?

How can I use my time capsule as a time machine backup without using it wirelessly and not as a wireless router?

bzb888 wrote:
I have a wireless transmitter already, would like to use the capsule just as a back up drive, I tried hooking up from the ethernet port on the imac to the one of the ports on the capsule but then my Wifi would not work. do I hook the cable to the port with the circle or the arrows?
It is better to have the TC as part of the main network in bridge. You do not need to run wireless.
If you want to use the TC plugged in by ethernet and still use wireless for internet, that is possible but the setup is rather more complicated.. the computer must not get confused about which device to use as a gateway or dns server.
See info in this thread on setting this up.
https://discussions.apple.com/thread/4817218?tstart=30
I need to add.. a USB drive would be cheaper, faster and more reliable. It is really poor use of a TC.

Is possible to have a time machine backup on an external hd connected to either a primary or secondary router and not have "back to my mac" using 10.7.3?

Is possible to have a time machine backup on an external hd connected to either a primary or secondary router and not have "back to my mac" using 10.7.3?

The bottom line is that Apple does not support Time Machine backups at the USB port of the AirPort Extreme. If they don't support their own router, they certainly don't support other routers from other manufacturers.
Connect the drive directly to the Mac using either USB or FireWire.....or....use a Time Capsule. Either of these setups will be supported.
If you want to try the unsupported method(s), you can certainly do so. But, I would suggest that you have a secondary backup plan in place if this is important data that you will be backing up.

Cannot transfer Time Machine backups from one external drive to another

Since I bought my 13 inch MacBook Pro in September 2014 I've been keeping Time Machine backups on an external 1TB Lacie Rugged. This is partitioned into three and one of the partitions contains my iPhoto library.
Last weekend I left my MBP disconnected from the power source but with the external hard drive still plugged in. Long story short - the battery level fell below the minimum needed to operate so it turned itself off and 'disconnected' the external hard drive. This resulted in a corrupted iPhoto library which is no longer accessible.
In order to restore my iPhoto Library from another backup I needed to buy a second external hard drive. Yesterday I bought a 2TB Lacie Rugged which I've now partitioned into 5.
I want to move my Time Machine backups from the 1TB Lacie Rugged to a partition on the 2TB Lacie Rugged (to take advantage of the new Lacie's Thunderbolt connection).
I read the Apple article -
HT202380: Time Machine: How to transfer backups from the current backup drive to a new backup drive
and followed the instructions precisely. About 2 hours into the transfer I came back to my MacBook Pro and saw a message saying that it was not possible to complete the transfer because I did not have the correct permissions. The only option was to click the OK button which stopped the transfer.
Can anyone advise what I should do next?
Cheers
Tricia

Hi Eric,
Thank you for your response. I came across another thread yesterday which suggested the Restore via Disk Utility method. It worked for me, too. This was after I had tried following the method suggested in the Apple article above three times but each time the message was the same ....
The operation can't be completed because you don't have permission to access some of the items.
I dare say that Apple would like to have us believe that it's a simple matter of 'drag and drop' but it certainly wasn't for me. From what I've read the permission problem crops up fairly frequently. Before the second and third attempts I had already amended Permissions on the Time Machine backups so that everyone could read and write, so that mustn't have been the problem. I'm the only person who uses my computer so that's not a problem.
The next problem I have is that I decided I would use the Restore route to transfer my SuperDuper clone rather than start from scratch. Unfortunately, the partition size on my original backup disk where SuperDuper clone is is 350GB and the size of the SuperDuper clone partition on my new backup is 300GB.
Of course, Apple says you can resize partitions using Disk Utility. What they don't say is you can downsize partitions but (in my experience and that of many other frustrated users on various forums) you CANNOT upsize using Disk Utility. I have 100GB spare on my external hard drive (from downsizing two partitions by 50GB each) BUT there is no way Disk Utility will let me increase the size of SuperDuper partition to 350GB :-(((
Cheers
Tricia

Time Machine backup to AEBS external hard drive

Buy in haste, repent at leisure they say. I needed a new wireless router and thought the AEBS looked just the thing - and a quick look on the spec page showed you could connect an external hard drive via USB - great, I could back up all our computers wirelessly I thought, using Time Machine. Didn't see the small print that says you cannot do this, tho' can't see why Apple couldn't make it work.
I have had a whole string of hard drives go down in the past year, LaCie, Maxtor, WD, and two internal hard drives from a MacBook and a MacBook Pro. The only ones that seem bullet proof are the Gtech drives I have for editing in Final Cut so I bought one of those for our communal Time Machine drive.
To begin with everything worked fine despite Apple not supporting this set up. Then with a regular Software update I must have upped the firmware to 7.4.2 and the system stopped working. I discovered the problem and went back to 7.4.1 but no joy. Then, inexplicably, it began to work again later that day so I just breathed a sigh of relief. Now it's happened again - I realised that I had updated to 7.4.2 again - presumably from a Snow Leopard update, and I am now unable to get it going again even after going back to 7.4.1.
I can select the external HD so that it appears on the desk top as a wireless drive, it appears in the list of available disks in TM, but if you ask it to back up it takes an age to return a message saying it 'could not access the sparsebundle (error 109).
It seems to me I have invested heavily in a system that is never going to work but I wondered if there was some way of backing up manually over the wireless link using another type of back up system? Or are there other things I should try? I know some people seem to have this set up working fine...

The problem here is the way Apple chooses to implement Time Machine Backup in 10.6.x to a Network volume. When TM first came out myself and a bunch of similarly naive Unix hackers figured we could get the best of both worlds by backing up with Time Machine to a backed up or otherwise redundant network volume using Time Machine. But in the beginning TM didn't backup to network volumes. It does now by creating a sparse bundle on the network volume and backing up to the Sparse bundle as if it were a physical, local, disk drive. I seems logical to infer that Time Machine was written to backup to locally connected disk drives which differ from network disk drives in one very important respect: You can tell a local, physical disk drive that you need to know the status of any given write operation and you can trust that result with a reasonably high degree of confidence. That same can't be said for a write to network drive so Apple fakes it by creating a Pseudo Drive or Disk Image Drive on the network volume and writing way. The Sparse Bundle Error comes up when the Pseudo Drive wasn't put away correctly. There are filesystem repair programs to fix this condition which are described in other threads. Dig around for "fsck sparse bundle" on Google the next time this happens and you may be able to rescue things.

My experiences copying Time Machine backups from one external drive to another

I am reposting this. The first one was rejected because it contained 'product feedback' and I was directed to the 'Terms of Use'. The 'Terms of Use' say feedback is welcome...***?!?
My 3TB external drive started to die a few weeks ago. It was still under warranty and I just got the new one yesterday. I wanted to preserve all my backups (I had every backup for my late 2012 iMac) on it.
The short of it is that there were like 20-25 million files there or something crazy like that. Finder was going to take forever to count the files. cp and rsync would take like a week. I decided it wasn't worth the hassle, so I just securely erased the old disk and did a new initial backup on the new disk.
The old disk would only mount in read-only mode, so I couldn't prune the backups down to a manageable size. Unless you only have a handful of backups, or you can internally mount the drives to make it go faster, it's going to take forever to do this.
Regards, Patrick

Hi Eric,
Thank you for your response. I came across another thread yesterday which suggested the Restore via Disk Utility method. It worked for me, too. This was after I had tried following the method suggested in the Apple article above three times but each time the message was the same ....
The operation can't be completed because you don't have permission to access some of the items.
I dare say that Apple would like to have us believe that it's a simple matter of 'drag and drop' but it certainly wasn't for me. From what I've read the permission problem crops up fairly frequently. Before the second and third attempts I had already amended Permissions on the Time Machine backups so that everyone could read and write, so that mustn't have been the problem. I'm the only person who uses my computer so that's not a problem.
The next problem I have is that I decided I would use the Restore route to transfer my SuperDuper clone rather than start from scratch. Unfortunately, the partition size on my original backup disk where SuperDuper clone is is 350GB and the size of the SuperDuper clone partition on my new backup is 300GB.
Of course, Apple says you can resize partitions using Disk Utility. What they don't say is you can downsize partitions but (in my experience and that of many other frustrated users on various forums) you CANNOT upsize using Disk Utility. I have 100GB spare on my external hard drive (from downsizing two partitions by 50GB each) BUT there is no way Disk Utility will let me increase the size of SuperDuper partition to 350GB :-(((
Cheers
Tricia

Switch hard drive from local to Airport Extreeme for Time Machine Backup

I have an external drive I am using for time machine backups for my iMac. I have an Airport Extreme and would like to use it to backup my iMac and my Macbook Pro (wireless). I have a PC that would be nice to backup a few things also, but not mandatory.
If I move the hard drive from the 400 FireWire port to the Airport, will it need to be reconfigured to allow for backups on teh network? Will it erase (or will I need to erase) the drive's current backup data of my iMac? Do I need to partition it to allow for multiple machine backups?
Thanks.
Matt

If I move the hard drive from the 400 FireWire port to the Airport, will it need to be reconfigured to allow for backups on teh network?
No, as long as the external hard drive is formatted in either HFS+ or FAT32 it will be recognized by the AirPort.
Will it erase (or will I need to erase) the drive's current backup data of my iMac?
Potentially, yes. Time Machine backups are stored differently on local attached drives versus those that are network-based. There is a procedure to "copy" an existing TM backup from an external drive to a Time Capsule that may work for an AirPort Disk (external drive connected to either a TC or AirPort Extreme). However, I would strongly recommend not going this route as Apple does not currently support Time Machine backups to AirPort Disks.
Do I need to partition it to allow for multiple machine backups?
For Time Machine this would not be necessary as it will create a unique "file" for each Mac. However, you may have other requirements that partitioning the drive would make sense. Note: You would have to partition the drive prior to connecting it to the AirPort, as the AirPort Utility itself does not support partition management.

Time Machine Backup to Netgear router attached USB

I have a Netgear Router to which I can attach a USB drive. I would like to have this attached and available all the time for my Time Machine backup.
- I have the instructions from Netgear, which say the drive should be formatted as GUID or MBR
- I have a previously partitioned drive which I've been using for a few months connected directly to my MacBook Pro
- This 500GB drive was partitioned 400GB as the Mac OS Extended format and 100GB as FAT
- I use the 400GB for the Time Machine Backup
- When I plug the drive into the Netgear router it sees the FAT partition but not the other one.
1. Is there a way to change the 400GB partition to GUID or MBR?
2, If I have to reformat the whole drive to GUID or MBR, will either of those formats be bad for future retrieval of Time Machine backup and file permissioning on a new Mac?
Thank you!

First please be aware that Apple does NOT support Time Machine backups to HDDs attached to the AirPort Extreme Base Station. However, if you still wish to do so, you simply need to first use the AirPort Utility to share out the attached USB drive, and then, 'point' Time Machine to this drive.
For details on how to set up a Time Machine drive, please check out the following Apple Support article.

Time Machine Backups Not Recognized When Drive Added to Airport Extreme

Since January, I have been taking backups of my Mac Pro with Time Machine and a SimpleTech external drive plugged into a USB port.
Recently, I purchased an Airport Extreme router and decided that plugging the SimpeTech drive into the router would provide access all the times. After plugging the drive into the router and providing the correct password, Voila!, instant access.
Later, when it became time for the next scheduled backup, initially TM could not find the drive. No problem... in TM preferences, the SimpleTech drive was listed as available, and so it was a simple matter to telling TM to use that drive.
So far, so good... but now the issue.
Instead of creating the next incremental backup in the set, Time Machine created a new folder and started taking a full backup of the entire HD as if it were the first backup being taken. Incidentally, the name of the computer in the original backup set was "Ron's Computer". Now, TM says that it is backing up "Ron's Computer 78989018975923789637289795278957928". Obviously, I would like TM to continue taking backups of "Ron's Computer" using the original set of incremental backups.
Have I incorrectly added the drive to the network?
Was there something I failed to do in the TM setup?
I interrupted the full backup assuming that (a) it could not be merged with the original set of incrementals and (b) I would not/should not do so anyway.
Anyone else have this issue? Resolution?

I commented on another thread and came to a surprising revelation:
Time Machine backups are created differently depending on if the target drive is connected locally or if it is connected as a network attached storage (NAS) device.
Your initial backup was via a local HDD. Once connected to your AXBS, TM treats your external HDD as a NAS. Now TM will create a sparsebundle backup which is DIFFERENT than your initial local backup. It cannot add to your first backup even though it's right there on the drive. I believe you can still access the backups (ctrl-click the TM icon -> Browse other TM disks). If the old backup doesn't have too much important info, just continue with the new backup as the wireless backup option is functional. I don't know if the old backup will be deleted without warning if space starts to run out, though.
If you are intent on continuing with the old backup (January is a long time), check out these links (not really for the faint of heart):
http://discussions.apple.com/thread.jspa?messageID=7860904&#7860904
http://rolf.haynberg.de/?p=83
Good luck and welcome to Apple Discussions!

Data Recovery of Time Machine Backup From a Corrupted Drive

I had to install 10.2 and 9.2.2 on an internal drive in my 2003 MDD G4 but first I had to reformat it (and wipe out its data) since it did not have OS 9 drivers installed. No problem thinks I since its contents are backed up to my 500 GB Western Digital HD. Installation of 10.2/9.2.2 was successful but when I go back into 10.5.8 to restore the contents of the newly formatted drive the external drive with the Time Machine backup will not mount. It churns and grinds forever and nothing I've tried (after consulting the WD support web site) helps. It is recognized by Disk Utility but that is all.
Any thoughts on whether/how to recover the lost backup? Many thanks in advance.

mvaldeslora wrote:
Well, I am happy to report a happy ending. Turns out DW had crashed but I initiated the procedure again and it was able to rebuild the drive's directory in a couple of hours. Time Machine then recognized the drive and I was able to restore the contents of the drive on which I installed 10.2/9.2.2 earlier in this saga. I will reformat the external WD drive now and see how it performs before I decide whether it's a keeper or not. Thanks for all comments and observations.
Yay!
If those are your only backups, please do yourself a favor: do not trust them to that drive! Get a new one, and put TM backups on one, and use the other to regularly update a "clone" or at least home folder backups via CarbonCopyCloner, SuperDuper, or the like.
Murphy was an optimist!

I have replaced my old hard drive with a new SSD drive. Can I restore a complete Time Machine backup

I have replaced my old hard drive on a MacBook Pro midyear 2010 with a new SSD drive. I have a complete system backup of my old drive in an external hard drive using Time Machine.
Questions that I would like to get answered.
1) Can I connect my external hard drive to the macbook pro and use that to boot up my machine by pressing and holding down the Options key? Once booted up successfully, can I use Disk Utility to format the new SSD and then restore the complete time machine backup?
2) If that is not possible, can I use my old drive which I can connect using a USB adapter and use that to boot up by following the same strategy as listed in Step#1 above?
3) If neither options are possible, do I need to use a bootable USB drive for Mavericks OS X to boot up the machine,
I have Mavericks OS X ( 10.9.6) and I do not have a DVD of the OS.
Any help is appreciated.

Let me first document the steps that did not work and then I will document the steps that worked.
1) Replaced the hard drive with SSD.
2) Connected the original hard drive using a USB adapter to the MacBook to make it behave like an external device.
3) Powered on the machine and on hearing the chime pressed Command-R to start in recovery mode.
4) Chose the Disk Utility option to erase and format the SSD. The format chosen was Mac OS Extended Journaled.
5) Once the formatting was done, then clicked on the "Restore" tab in Disk Utility
6) In the Source field, dragged my original hard drive from the left pane and placed it in the field
7) On the destination field, choose the new SSD drive. Clicked on "Restore". Gave me a warning, accepted the warning and the restore was under way.
8) I had 236 GB to restore so took 3.5 hours before it was done.
9) Disconnected the external hard drive ( my original internal HDD), shut down the machine and powered on again.
10) Heard the chime and after that it was a white screen with no Apple logo.
Was visibly upset and started thinking what my next move will be. Then tried these steps
1) Again powered off the machine.
2) Connected my internal HDD once more as an external drive
3) Powered on and on hearing the chime, pressed Command-R as before
4) Once the OS X utilities screen popped up, this time chose Install OS X
5) Erased the contents of SSD once more and reformatted it using Mac OS Extended Journaled.
6) Installed OS X by following the prompts.
7) Once the OS was installed, I was presented with an option on how to transfer data to this new Mac
8) Chose the option to move the data from my original HDD.
9) Took another 3 hours to move the data.
10) Removed the original HDD once the transfer was complete, powered down the machine and started it once more.
11) Booted successfully and all my content is now accessible on the new SSD.
Moral of the story - It is the spirit that counts.

Restore Time Machine backup after hard drive crash

My hard drive on the mac book crashed, so I replaced it. Now I need to get my time machine back up on the new drive. I've already started using the computer and reinstalled lion, so I'm not getting the original "backup" screen. How do I find my old time machine backups?

Your best bet is to do a full restore from your backups. See #14 in Time Machine - Frequently Asked Questions.

Not enough space on my new SSD drive to import my data from time machine backup, how can I import my latest backup minus some big files?

I just got a new 256GB SSD drive for my mac, I want to import my data from time machine backup, but its larger than 256GB since it used to be on my old optical drive. How can I import my latest backup keeping out some big files on the external drive?

Hello Salemr,
When you restore from a Time Machine back up, you can tell it to not transfer folders like Desktop, Documents. Downloads, Movies, Music, Pictures and Public. Take a look at the article below for the steps to restore from your back up.
Move your data to a new Mac
http://support.apple.com/en-us/ht5872
Regards,
-Norm G.

FIOS router drive as a Time Machine backup drive.

Similar Messages

Maybe you are looking for