Firefox 4.0 all of a sudden starts hanging. Tried everything please help.
Okay so I've had firefox 4.0 for months now and all of a sudden it started hanging every few seconds. Now I since this happened I've been looking everywhere for a solution.
I've tried uninstalling it and re-installing 3.6.15. I tried starting it in safe mode and having ALL of my add-ons and everything disabled. I tried creating a new profile, but that still didn't work. I made sure all my plug-ins were up to date and they are.
The first thing I did was run a system wide scan with Norton Internet Security to see if there was a virus and nothing showed up. I've literally tried EVERYTHING I could possibly think of so please please help would be very much appreciated.
Just read that the default memory storage on FF is set to 5 mbs. You can up that by clicking on tools, advanced and overriding the default and set it to 50 mbs (if you use lots of tabs) or 10 mbs (if you use just a few).
I open a blank tab and clear the cache periodically, while I am working. I can have several tabs open and watch videos on Youtube, by doing this. Have you cleared your cache?
Since I have an older computer, I've also used CCleaner for years. I use it often, but always before signing off. You can get it free...search for CCleaner, download from Pirifoam free. I didn't change any of the settings and it clears crap left behind from uninstalling programs, clears all browsers at once of: cookies, history, passwords, etc. I love it!
I had freezing, before using the "open blank tab, clear the cache" thing. Now I have no problems. Plus, as I said...you can change the default memory usage for FF and that should help too.
Hope this helps! Good luck! :)
Similar Messages
-
Hey everyone,
My macbook air is just over a month old and has been working great until this week.
Weird things...
Firstly. I turned it on one day and it came up with an error saying my ip adress has been used by another device
Secondly. Random screen saver comes on when i have not changed any settings
FInally. My internet is ridiculously slow. The internet pages need to be refreshed constantly and half the time load after 10 mins or not at all.
My wifi is connected to my iphone which i have been using as internet as the speeds on that are not affectd.
I change my DNS to 8.8.8.8 and did not allow ipv6 with a restart and cleared cache like other forums recommended. Still did nothing but here is an etrecheck report.
Hardware Information:
MacBook Air (13-inch, Mid 2013)
MacBook Air - model: MacBookAir6,2
1 1.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 5000 - VRAM: 1024 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 2 days 2:21:16
Disk Information:
APPLE SSD SD0128F disk0 : (121.33 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 120.47 GB (52.45 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Internal Memory Card Reader 32.03 GB
DIGI CAMERA (disk2s1) /Volumes/DIGI CAMERA: 32.02 GB (31 GB free)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.67)
Problem System Launch Daemons:
[System] de.novamedia.nmnetmgrd.plist 3rd-Party support link
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
[System] com.divx.dms.agent.plist 3rd-Party support link
[System] com.divx.update.agent.plist 3rd-Party support link
[System] de.novamedia.VodafoneDeviceObserver.plist 3rd-Party support link
User Launch Agents:
User Login Items:
iTunesHelper
uTorrent
Vodafone Mobile Broadband
VMCStatusMenu
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
DivX Web Player: Version: 3.1.0.13 - SDK 10.5 3rd-Party support link
Flash Player: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
OVSHelper: Version: 1.1 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
WebEx64: Version: 1.0 - SDK 10.6 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
/Library/Application Support/DivX
DivXUpdate: Version: 1.0 - SDK 10.5 3rd-Party support link
DivXMediaServer: Version: 10.1 - SDK 10.5 3rd-Party support link
DivXTransferWizard: Version: 10.1.0 (Build 10.1.0.102) - SDK 10.5 3rd-Party support link
DMSLaunch: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
DivX Converter: Version: 10.1.0 (Build 10.1.0.166) - SDK 10.5 3rd-Party support link
DivX Player: Version: 10.1.0 (Build 11.3.0.40) - SDK 10.5 3rd-Party support link
Time Machine:
Time Machine not configured!
Top Processes by CPU:
6% uTorrent
3% Safari
2% WindowServer
1% Dock
1% Vodafone Mobile Broadband
Top Processes by Memory:
164 MB Mail
131 MB com.apple.IconServicesAgent
127 MB Safari
102 MB QuickTime Player
98 MB WindowServer
Virtual Memory Information:
705 MB Free RAM
1.77 GB Active RAM
948 MB Inactive RAM
625 MB Wired RAM
603 MB Page-ins
0 B Page-outsTamara wrote:
I'd also suggest checking to see if you're in Airplane Mode (under Settings).
Or looking in the upper left of the screen for an airplane icon. -
MacBook Pro 13" Suddenly Started Running Super Slow, please help!
Yesterday I was on the computer on Facebook, then I spilled a juice over the keyboard. I turned it off and let it sit there, then I turned it on and it took about 3 minutes to show the Log in screen, then I logged in and it was taking long to load the stuff in my desktop and it was being really slow for everything.
Please Help!
I got it on December, and I don't have much time with it!! I really need to fix it.
Oh and the track pad stopped moving the pointer...This should explain it:
http://www.apple.com/retail/geniusbar/
They are FREE.
Ciao. -
Please help me!!!
Maybe your account was hijacked. If you didn't change your password that is quite likely. Contact Apple Account Security by going here: http://support.apple.com/kb/HT5699
-
Why does my imac all of a sudden start changing "this computer's local host name"
why does my imac all of a sudden start indicating that "this computer's local hostname is already in use on this network" and then change the name
The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref <b>network.http.max-connections</b> from 256 to 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites -
I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
My sleep/wake button just all of the sudden started being sticky. It is still responsive but is difficult to press down. What should I do?
There isn't much you can do to try and clean/service that button so best thing to do is take it to an Apple genius bar and have them check it out and see about repair or cleanng whatever they recommend.
-
My iMac all of the sudden started going in and out of the dashboard, then started changing all files on the desktop to 2's. It also did this when having another window open. Do I have a virus?
There are no viruses that can affect Apple OS X.
What files do you keep on the Desktop? How many?
Performance tip: Keep the Desktop clutter-free (empty, if possible)
Mac OS X's Desktop is the de facto location for downloaded files, and for many users, in-progress works that will either be organized later or deleted altogether. The desktop can also be gluttonous, however, becoming a catch-all for files that linger indefinitely.
Unfortunately - aside from the effect of disarray it creates - keeping dozens or hundreds of files on the Desktop can significantly degrade performance. Not necessarily because the system is sluggish with regard to rendering the icons on the desktop and storing them in memory persistently (which may be true in some cases), but more likely because keeping an excessive number of items on the Desktop can cause the windowserver process to generate reams of logfiles, which obviously draws resources away from other system tasks. Each of your icons on your desktop is stored as a window in the window server, not as an alias. The more you have stored, the more strain it puts on the window server. Check your desktop for unnecessary icons and clear them out.
Keeping as few items as possible on the Desktop can prove a surprisingly effective performance boon. Even creating a single folder on your Desktop and placing all current and future clutter inside, then logging out and back in can provide an immediately noticeable speed boost, particularly for the Finder.
And it is why Apple invented 'Stacks' for Leopard.
Here is Apple's take on the subject:
http://www.apple.com/pro/tips/immaculate_desktop.html -
Why did my camera all of a sudden start taking blury photos
Without any changes to my phone my photos just all of a sudden started to be blury. I tried to reset my phone, clean off the lens and update the software and no luck. I also tried fiddling with the setting in the camera and still nothing. What can I do?
Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo. -
We just moved from the United States to Costa Rica. The first two days my mac worked great. Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it. When I restart it seems okay and I see my main screen, but only for a second and then it goes black again.
This computer was brand new in June. Is it the humidity??? What can I do. Please help!!!!No guarantess but try smc and pram resets,
-
2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light
The power supply is shot. But that it lasted even this long is the wonder.. not that it died.
The TC runs too hot..
Look on ebay for "Time Capsule power supply"
You can get a replacement and fix it although the economics are not so good.. it is probably time for a new TC.
If you can DIY it is really only a few dollars worth of capacitors that go bad.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
For a bunch of alternatives. -
Hello! Why at me in new мозиле, the old kind has remained! I about the top button Firefox! As I do not establish, all turns out in an old kind! Please help to solve a problem! Thankful in advance!
Hello! Why at me in new мозиле, the old kind has remained! I about the top button Firefox! As I do not establish, all turns out in an old kind! Please help to solve a problem! Thankful in advance!
-
I have purchased Adobe CC and have been paying $9.99 for two months now, but all of the sudden today I tried to open it and it is saying that my 30 day trial has expired and will not let me access it.
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
Hello!
I just figured this out.....When Firefox is open, my Illustrator CS2 modifier keys stop working?
As soon as I shut down Firefox, they start working again. Please help!
Thanks!
== This happened ==
Every time Firefox opened
== Not sure.Try to create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Everytime I come across a site that requires an captcha code, it's always blank, I cannot enter anything because no codes are visible and the audio option doesn't work either (even though my audio in general works fine) It works in none of my other browsers and I've tried uninstalling, reinstalling firefox as well as clearing my cache and cookies, but nothing, please help? thanks!
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images, the permissions.default.images pref should be 1.
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show
Maybe you are looking for
-
I just synced my iphone 3gs after downloading the safari update. Now I can't open any apps except the ones that came with the phone. I have tried rebooting, turning it off and on. When I select the icon, it goes to the page then returns to my scre
-
Error while uploading SSRS Reports to SharePoint Report Library
Dear All, I am having a SSRS Server running in SharePoint integrated mode and I am running reports in SharePoint successfully, but I am facing issue with one site as shown below. I am getting below error while uploading a report to specific path as s
-
RE: use of SAP_J2EE_ADMIN Role in ABAP while having no permission in UME
Hi, i know that if we are using ABAP+JAVA stacks we need to have SAP_J2EE_ADMIN to do administration on J2EE side. i have a question on this. 1. Do we map SAP_J2EE_ADMIN role to a portal role or assigning a user in ABAP with role SAP_J2EE_ADMIN will
-
Hi, I have a query on synchronization. When an object is accessed by two or more threads simultaneously, we use the synchronize keyword to prevent two threads simultaneos access. So on which this lock is obtained either it is on the object or the syn
-
How to get SYSDBA or SYSOPER credentials
Hi, I am having SYS credentials. But I want to know SYSDBA or SYSOPER credentials. How can I check in Database to get them? DB:11g. I am trying to connect using windows GUI it is asking for anyone of those SYSDBA or SYSOPER credentials