Firefox displays warning message about an SSL site

When I connect to an SSL site, sometimes firefox displayes a warning message and I can select add exception. When I click on "I understand the risk" and then "view certificate", it says no need to add exception. It actually shows the EV SSL Cert green bar. Why is the firefox showing the error in first place. I do use host file entry for the SSL site. This does not happen all the time. Sometimes, the page with the green bar is shown properly. This is a big problem as once you enter some information and submit, the warning may come back again and page is then not shown.

How did Firefox showed that warning?
Was the a pop-up on a sliding bar at the top of the browser page or a message on the web page?
Do you remember any content of that message?
Was it about a certificate (secure connection)?
Rename the file "permissions.sqlite" to permissions.sqlite.sav in the Firefox Profile Folder to remove all exceptions (cookies, images, pop-ups, software).
If renaming didn't help then you can undo and rename the file permissions.sqlite.sav to permissions.sqlite to get back the old exceptions.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
Please update Firefox to the latest version via "Help > About Firefox" or "Help > Check for Updates"
The Firefox Firefox/4.0.1 version that you currently run is no longer supported with security updates.
*http://en.wikipedia.org/wiki/Vulnerability_(computing)
*http://www.mozilla.org/security/known-vulnerabilities/
You can find the latest Firefox release in all languages and for all Operating Systems here:
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html

Similar Messages

  • How can i display warning messages in user exit EXIT_SAPLMGMU_001 (MM02)

    Hi all,
    while modifying the material master using MM02, i have added new conditions to display messages in user exit EXIT_SPALMGMU_001.
    But using this user exit i am not able to display warning messages.
    Can you please help me with this?
    Sample code which i have included in exit :
    SELECT SINGLE mstav FROM mara
    INTO w_mstav
    WHERE matnr = wmara-matnr.
    IF wmara-mstav NE w_mstav.
    IF wmara-mstdv NE sy-datum.
    wmara-mstdv = sy-datum.
    MESSAGE w177(z03_mm) WITH text-s04 text-s21.
    ENDIF.
    ENDIF.
    Thank you all in advance.

    As written in the SAP documentation of the Enhancement , you can only raise error message using a
    MESSAGE .. RAISING APPLICATION_ERROR.
    You could manage the "warning" yourself, sending an error first time and keeping a trace of the check in some STATICS variable, and not raising the error again if data input remains unchanged between two call of the include.
    <i>----
    EXIT_SAPLMGMU_001
    Where Is the Customer Exit - EXIT_SAPLMGMU_001 called?
    The customer exit is in function module MATERIAL_UPDATE_ALL. The
    function module checks the data for errors (logical relationships,
    foreign keys, fixed domain values, and so on) when the material master
    is updated.
    Use
    o New fields
    You can make checks possible for new fields of your own. These
    checks must be identical to the checks that you carry out for your
    new fields in online maintenance.
    o Existing fields
    For existing fields, you can extend and intensify the checks.
    You can also change data for descriptions and general material data
    (MARA). For example, the descriptions can be generated from attributes
    of the material.
    Limitations
    You cannot bypass existing checks.
    Interface to Application
    The respective data of the current logical transaction is contained in
    the structures, for example, in structure WMARA for MARA. Nonrelevant
    structures are transferred with their initial values.
    General material data that can be changed (CMARA) has the structure
    MARU. This MARA view contains fewer internal fields than MARA itself. If
    WMARA is filled, CMARA is also filled when accessed.
    The customer exit contains the exception APPLICATION_ERROR for your
    self-defined error situations.
    Using the language element MESSAGE .. RAISING APPLICATION_ERROR, you can
    terminate the current (logical) transaction and display your message in
    the log. </i>
    Regards

  • Check space in the end to display warning message.

    I am currently working on validations on functional locations in the EDIT MASK. the code is already written for validations on to check for space in the beginning of the each level in the edit mask. however user requirement is that the program should produce warning messages for spaces regardless of where they appear in the Edit Mask. we have not validated to check for space at the end of each level.
    I have checked with condense ,shift string right deleting trailing spaces however I am not able to check for space at the end of levels.
    when i debugged the program the level8 length shows as 2 even though there is only one char in the level8. i
    could you please suggest any possible solution or any keywords that would help. you can go through the below code which is already written for checking space in the begining.
    here l_level1
    Level 8 errors
        l_length = STRLEN( l_level8 ).
    IF ( l_level8 = space AND l_dash_count > 6 ) OR
             l_dash_count > 7 OR
             l_length > 4.
          lt_mask_err-error = '8E'.
          APPEND lt_mask_err.
          l_errlvl8 = c_y.
        ENDIF.
    Level 8 Warning
        IF rb_bdc <> c_on AND p_warn = c_on AND
        ( l_level8 <> space AND l_level8+0(1) = space ).
          lt_mask_err-error = '8W'.
          APPEND lt_mask_err.
        ENDIF.
    i have added this code to display warning message using shift.
        l_lev8 = l_level8.                                                
        shift l_lev8 right.                                             
        l_length = STRLEN( l_lev8 ).                                    
        IF rb_bdc <> c_on AND p_warn = c_on AND                       
        ( l_lev8 <> space AND l_lev8+0(1) = space ).                    
          lt_mask_err-error = '1W'.                                     
          APPEND lt_mask_err.                                          
        ENDIF.

    You can use REGEX for string parsing, it is really handy. If you would like to test it out check out program "demo_regex_toy".
    Trailing space:
    FIND REGEX '[ ]+$' IN lv_text.
    leading space
    FIND REGEX '^[ ]+' IN lv_text.
    Any space
    FIND ALL OCCURRENCES OF REGEX '[ ]+' IN lv_text.

  • Problem with displaying warning message in exit EXIT_SAPMM06E_012

    Hi,
    I need in EXIT_SAPMM06E_012 exit display warning message.
    I've created klass Y0108MM_Z1 and message 000 in it.
    When i display as error message -> message e000(Y0108MM_Z1).
    everything is fine.
    but when use message w000(Y0108MM_Z1) it doesn't apear.
    Please help it is very important for me.
    Regards,
    Greg.
    Message was edited by:
            Grzegorz Skibinski

    Hi,
    I think message will appear.
    For testing please do from the main screen press Alt+F12 > options> options tab --> check " dialog box at warning message " and test your scenrio.
    Here warning message appear in a dialog box.
    a®

  • Display warning message

    Hi guys,
    I need some help with the "displaying warning message" in labview 2010 SP1 base development system. My requirement is, I would like to display a warning message (text alert) when the RPM of the pump falls below 10000 rpm. In this case I am measuring the current, voltage and rpm of a pump. Please let me know how I can get this done. I have attached the main vi and the 2 sub-vi for reference. Also let me know how I can set sound alerts in addition to text alerts when the pump RPM falls below 10000 rpm. Thanks for your help.
    Raj
    Attachments:
    Current_Voltage_RPM-_continuous_sampling_count iterations.vi ‏116 KB
    Current_Voltage_RPM-_sub_VI-1.vi ‏18 KB
    Current_Voltage_RPM-_sub_VI-2.vi ‏17 KB

    Hi Rajesh,
      If you want to display a warning text alert ,then you can just create a text on front panel and using VI properties ,can make it as a text alert.For sound alert use sound functions .Please have a look at the attached vi.Run this vi and  click visible button ,you can find an alert text with some sound.Modify your logic accordingly.
    Regards,
    SrikrishnaNF
    Attachments:
    CheckThisVi.vi ‏18 KB

  • I have been using CS6 for two years without incident.  Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help

    I have been using CS6 for two years without incident.  Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help?

    Hi Mylenium,
    Thanks for your response.
    Here is the error information showing up:
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: Adobe Media Encoder.exe
      Application Version: 6.0.0.382
      Application Timestamp: 4f62fcf1
      Fault Module Name: WatchFolder.dll
      Fault Module Version: 6.0.0.382
      Fault Module Timestamp: 4f62f37f
      Exception Code: c0000005
      Exception Offset: 0000000000007899
      OS Version: 6.1.7601.2.1.0.768.3
      Locale ID: 4105
      Additional Information 1: 9a62
      Additional Information 2: 9a620826d8ae4a2fa8b984b39290a503
      Additional Information 3: 1fb3
      Additional Information 4: 1fb304eee594288faeefbf1271b70d37
    I am using a PC Windows 7

  • I upgraded to Mavericks.  Everything went smoothly.  But now Excel is giving all of its warnings in what I believe is Chinese.  As an example I update a file, close it, and the warning message about saving is in Chinese.  Anybody else encounter this?

    I upgraded to Mavericks.  Everything went smoothly.  But now Excel is giving all of its warnings in what I believe is Chinese.  As an example I update a file, close it, and the warning message about saving is in Chinese.  Anybody else encounter this?

    If you don't get an answer here, ask in the forums devoted to MS stuff:
    http://answers.microsoft.com/en-us/mac/forum/macexcel

  • How to display warning message box with yes and no buttons

    Hi,
    I am writing the code to delete emp details from database.
    I want to display warning message with yes and no buttons after clicking the delete button in the same page, if yes is clicked, i want to invoke delete() method in AM.
    Is it possible, if yes pls suggest me how to do it.
    Thanks
    Message was edited by:
    user536125

    This is being discussed in
    warning message(dialog page) to be displayed in the same page
    Thanks
    Tapash

  • Display Warnning message before delete row

    i have a table and i added a column and but in it a button that perform delete action
    when i press the button a row is deleted but i want to display warning message before deleting for example
    "are you sure you want to delete this row ?" Yes or No
    If press yes the row will be deleted else no action is taken
    how can i do this ?

    You can use clientListener to do this.
    <af:commandImageLink text="Submit" id="cil1" partialSubmit="true" >
    <af:clientListener type="action" method="customConfirm"/>
    </af:commandImageLink>
    <af:resource type="javascript">
    customConfirm = function(event) {
    var answer = confirm('Are you sure you want to delete this row?');
    try
    if (!answer) {
    var component = AdfPage.PAGE.findComponentByAbsoluteId("cil1");
    ..... your action here.....
    catch(e) {
    alert(e)
    </af:resource>
    But if there is a event or event listener on the commandimagelink then it will always be called. To avoid that you could remove the actionlistener and add serverlistener and call it through the javascript function. See the "Web User Interface Developer's Guide for Oracle Application
    Development Framework" for more info.

  • How to display warning message before deleting a record?

    Hi all
    I want to display a warning popup message( "Do you realy want to delete the record? Yes - No" ) before user delete a record. My page fragment contains simple <af:table> which display the employees data and operations buttons "commit - delete - rollback"
    I use Jdeveloper release 11.1.4
    Database : oracle 10g
    Thanks in advance

    Thank you so much for replaying
    I have another question related to creating popup
    I have page template and only one jspx page based on the template named"UIShell.jspx"
    I make a lot of page fragments , I have - untill now- about 15 page fragments.
    all these fragments are shown as dynamic regions within UIShell.jspx"
    My question is
    Should I create popup dialog window in each page fragment in order to display the messages?
    If the answer is "YES" this will not be a good approach - I think.
    Is there a way to create just one popup dialog and use it an any page fragments.
    Regards
    Edited by: ta**** on Apr 17, 2011 8:44 AM

  • How to display warning message in PL/SQL?

    Hi,
    I would like to know how to display a warning message in PL/SQL?
    Thanks and Regards,
    SC

    PL/SQL is not an interactive programming language, so there is generally no place to print any sort of message, no place to prompt the user for input, etc.
    A SQL*Plus script can use the SQL*Plus client as a very basic way of interacting with users using the PROMPT command to accept input and using DBMS_OUTPUT to print messages to the console (assuming the script does a SET SERVEROUTPUT ON to enable printing the results). Other applications may have similar sorts of scripting possibilities, generally based on a subset of the commands SQL*Plus supports.
    Justin

  • FM to display warning message at status bar

    Hi,
    can any body give me the FM to display the warning message
    at status bar.
    Thanks in advance

    Hi,
    To give a warning message , you dont need any function module. You can use the keyword 'MESSAGE' and give the type as 'W'.
    Do a F1 on the keyword MESSAGE for further details.
    regards,
    Advait

  • Warning message about CMP problem when launching query - how to suppress?

    Dear Experts
    How can I suppress warning message that did not stop the query from running?
    I encounter this message when 1st launching it. The next run , it does not show. But if user run it  i think may still show. How to suppress it?
    The message is :
    =================
    Characteristic [Z_I_NN_FN]Application Sub Grou of the MultiProvider is not provided by the PartProvider ZC_00N; this means it is not identified. However, [Z_I_NN_FN]Application Sub Grou is compounded to 0COMP_CODE and 0COMP_CODE is identified with characteristic Z_I_MM_FM for InfoProvider ZC_006.
    In this case, there is a compounding or CMP problem with [Z_I_NN_FN]Application Sub Grou in the MultiProvider for PartProvider ZC_006.
    Processing characteristics with CMP problems in the data manager is very complicated and can have a negative impact on performance. The data manager cannot use SIDs for these characteristics (at least not in the corresponding InfoProvider) because the initial SID = 0 for [Z_I_NN_FN]Application Sub Grou is not the same as the initial compound key for 0COMP_CODE [Z_I_NN_FN]Application Sub Grou (that is, when real values are posted in ZC_006 for 0COMP_CODE).
    For this reason, hierarchies for [Z_I_NN_FN]Application Sub Grou must often be read at leaf level. Furthermore, it is not possible to use hierarchy aggregates for [Z_I_NN_FN]Application Sub Grou or for the remaining InfoProviders.
    System Response
    Where possible, the system tries to avoid negative impacts on performance. Unfortunately, such performance issues cannot be avoided if the correct results are to be displayed.
    Procedure
    When working with important MultiProviders, you should always avoid characteristics with CMP problems.
    ====================
    Please advise how to address CMP problem error message when launching query.
    regards
    Pascal

    Hi Pascal,
    Why dont you select those compounding objects in Multiprovider itself.As far as i understand while activating the MP it throws an error if compounding objects are not selected.
    One more thing to add which i noticed you can try running the query on analyzer if you are running it on RSRT.
    You can see the data even if MP is not active on analyzer but not on RSRT.
    Hope it helps.
    Regards,
    AL

  • How to display warning message ?

    Dear all,
    I would like to display a warning message, when the user doesn't key in a profit center (with Tcode: FB50).
    I have entered the option "Optionnal entry" for profit center for the field status group, but the system doesn't display any warning.
    Could you help me ?
    Thanks and best regards

    HI,
    Please try to use a Validation which will be easy to achive this. If you dont know how to create a validation please check the WIKI, you will find a documentation which can help you.
    Regards
    Ravinagh Boni

  • How to display Warning messages in BADI ME_PROCESS_REQ_CUST?

    Hi,
    I have implemented BADI ME_PROCESS_REQ_CUST and coded necessary logic according to my requirement in Method  PROCESS_ITEM.
    On a certain condition , I need to display a Warning message.
    I have written the code as follows:--
    message w001(00) with 'XYZ'.
    It didnt work.
    Then, I included the message in message class ZPBS, and coded as follows.
    message w012(zpbs).
    But, still it didnt work..
    Can u guys please guide me what I need to do?
    Thanks,
    Shivaa....

    Hello Shiva
    Have a look at method PO_READ of class CL_PO_HEADER_HANDLE_MM.
    METHOD po_read.
      INCLUDE mm_messages_mac.
      DATA: l_po_number TYPE ekko-ebeln.
      IF im_po_number NE space.
        l_po_number = im_po_number.
      ELSE.
        l_po_number = po_number.
      ENDIF.
    * authority check on transaction code disabled
    * If called via CALL TRANSACTION, this check is already done by basis
    * (see note 358122)
    * restriction of T-code authority check to Enjoy only
      IF for_bapi IS INITIAL.
    * tcode authorization
        IF NOT im_tcode IS INITIAL.
          CALL FUNCTION 'AUTHORITY_CHECK_TCODE'
            EXPORTING
              tcode  = im_tcode
            EXCEPTIONS
              ok     = 0
              not_ok = 1
              OTHERS = 2.
          IF sy-subrc NE 0.
            MESSAGE e172(00) WITH im_tcode INTO gl_dummy.
            mmpur_message_forced 'E' '00' '172' im_tcode '' '' ''.
            ex_result = mmpur_no.
            CALL METHOD set_state( im_state = c_available ).
            EXIT.
          ENDIF.
        ENDIF.
      ENDIF.
    Add the include MM_MESSAGE_MAC to you method and set the message using macro MMPUR_MESSAGE_FORCED.
    I am not sure whether the warning will indeed be displayed while changing an item but it should be displayed when checking the purchase requisition and presumably when saving it.
    Regards
       Uwe

Maybe you are looking for