Firefox on linux mint won't load pages or takes forever to do so

Installed Linux Mint on my laptop. Came with Firefox. For a day or so it loaded pages quickly. Now it either takes forever or doesn't load them at all. I have a wireless connection with 5 bars (sitting within 3 feet of the N wireless router.) What's up? Tried running in safe mode. Made no difference. URL below is my home page but Firefox won't load or is sssssslow to load any page.

Installed Linux Mint on my laptop. Came with Firefox. For a day or so it loaded pages quickly. Now it either takes forever or doesn't load them at all. I have a wireless connection with 5 bars (sitting within 3 feet of the N wireless router.) What's up? Tried running in safe mode. Made no difference. URL below is my home page but Firefox won't load or is sssssslow to load any page.

Similar Messages

  • Firefox 4.0.1 won't load pages until I move the cursor

    Whenever I click on any link, the new page doesn't appear until I move the cursor around. If it takes a long time to load, I have to do this multiple times. This sounds like a minor detail, but it's a pain in the ass. Also, it means that it doesn't automatically check for new emails in gmail, so I don't know if I have a new email unless I check it manually.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Facebook won't load properly. Takes forever and then I get a script page with log-in and then that takes forever and gives me further script that won't let me access anything. Other sites load and work OK!

    Started after last auto update several days ago. A few other sites are slow to load while many are good but Facebook just won't present it's usual mix of pre-programmed scripts and links but comes up eventually as part HTML script with a log-in box and when you log-in it then takes forever again and just gives HTML type script for "Friends" "messages" etc. but if you click these it goes nowhere!
    Also it won't let me clear history at all despite many tries. I removed and reloaded the program last night but no positive effect.

    I still haven't resolved this problem. Here is some more information...
    youtube is the only website that has started working, but it sometimes stops working again.
    There are many other sites that don't work, cnn.com, washingtonpost.com (sometimes), and a lot of others.
    I have contacted our internet service provider and they said that they had nothing to do with the problem.
    Some websites will not work at all. Safari tells me that it can't find the server. Some that do this are ups.com, computerworld.com, and others.
    I think that the problem is that, for some reason, our mac computers can't access certain servers where we are. (We are at a small ski resort (on the mountain) in Canada.) I think this because when a site doesn't load properly there are several errors and they are all "can't find host" errors from a couple of the same sites (ex. example.something.something).
    *Also, I ran a test on speedtest.net on the laptop and one of our iMacs and the results were way faster than anything actually loads/downloads or than the activity monitor shows, even when checking the activity monitor at the same time as running the test.

  • After doing a system restore, Firefox won't load pages.

    I restored my laptop a couple of days ago (from a previous date, not a full system restore), now firefox will open to the home page (google), but will not load any other page. It doesn't even bring up the "page won't load" page, it just continually says 'connecting' forever. I also noticed, even when I first open firefox, and it opens the google homepage, it doesn't have google.com in the address bar, it has 'about:home'. Internet explorer seems to be working fine, and my internet connection is fine, so I am not sure what the problem seems to be.

    hello rlyslowff, one thing you could try is to remove all program rules for firefox from your firewall/security software and let it detect the program again...
    please also [https://www.mozilla.org/en-US/plugincheck/ update your plugins] (some of them are out-dated & have security vulnerabilities that are actively exploited on the web).
    in case this didn't solve the issue, go to the firefox ''menu ≡ > help ? > troubleshooting information'', copy the contents of that page and paste them here into a reply on the forum, as this might give us further clues what is going on...

  • Shockwave doesn't work on firefox under linux mint 17, qiana

    I use Firefox 33.0 Mozilla Firefox for linux Mint: mint - 1.0
    I use linux mint 17, qiana. Cinnemon, 32-bit.
    As extensions for Firefox I use Adblock Plus 2.6.6.
    As plugins I use: DivX webplayer 1.4.0.233, Iced-Tea webplugin 1.5, OPenH264 video codec provoded by Cisco systems, Inc. 1.1, Quicktime plug-in 7.6.6. , Shockwave Flash 11.2.202.408, VLC Multimedia plugin (Compatible videos, 3.10.1), Windows Media Player plugin (compatible Videos 3.10.1)
    When I surf on a page http://www.jkp.com/media/wysiwyg/MindReading/demo/content/dswmedia/loader.html
    I get the information: "a plugin is needed to play this content"
    Since this url was under a button "View shockwave Demo" on page http://www.jkp.com/uk/mindreading/demo/ I presume that the pluging that is needed is a "Shockwave Flash" plugin, but I have installed that.
    So what do I have to solve the problem?

    It is looking for the Shockwave (director) player and not the Flash player.
    Adobe does not provide Shockwave player for Linux, only on Mac OSX and Windows. Besides it is more for few games and learning stuff and it used very little compared to the Flash Player for most users.
    As you can see it is only for Windows and Mac OSX.
    http://get.adobe.com/shockwave/otherversions/

  • Firefox ver. 3.6 stopped loading pages of any kind. Even Google or Facebook! Maybe it's because I tried to download a program that didn't even open up. All other browsers work normally.

    My Firefox ver. 3.6 stopped loading pages of any kind. Even Google or Facebook! I don't know how this happened. May it is because I tried to download a program that didn't even open up.... But I don't know how to make it work. All other browsers work normally, and I'm scanning for viruses even though my anti-virus did not warn me of anything... I tried to download a keygen and this is what happened. I can't figure out what it is. Not a connection problem. I even tried to uninstall an re-install firefox, but still nothing worked.

    Your issue may be caused by Malware. You can run and update the following '''free''' anti virus software:
    1. Malwarebytes (Free version) - http://www.malwarebytes.org
    2. Spybot Search & Destroy - http://www.safer-networking.org
    3.Spyware Terminator - http://www.spywareterminator.com
    In addition, there are a number of forums you can use to help get rid of your infection. These include:
    *http://www.bleepingcomputer.com/forums/
    *http://forums.spybot.info/
    *http://www.spywarewarrior.com/index.php

  • Firefox 12 is very slow to load pages and if two tabs are opening it lags.

    Firefox 12 is very slow to load pages and if two tabs are opening it lags. I've tried everything (e.g virus, defrag, I've created a new profile in "run", etc). I've had my router/line etc all checked and after 2 weeks of cleaning/testing etc its all pointing to Firefox as the problem. Please help as it's driving me nuts.

    I have the exact same problem.
    Not only does it load pages very slowly, sometimes the page will stop for a good 45 seconds and stop loading, only to finish it much later.
    Something is wrong with Firefox 12, it shouldn't be this slow.
    How is that each version is progressively worse than the one before it?.
    Stop releasing so many versions Mozilla, release one that works and build from there.

  • Since updating to ios7 my ipad freezes, randomly zooms in and out, black pages that take forever to load and battery charge doesn't last very long. It's very frustrating, is there anything I can do

    Since updating to ios7 my ipad freezes, randomly zooms in and out, black pages that take forever to load and battery charge doesn't last very long. It's very frustrating, is there anything I can do it seems to have a mind of its own

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • Firefox runs extremely slow on 64 bit PC it takes forever to open bookmarks are we going to get a 64 bit firefox

    Firefox runs extremely slow on 64 bit PC it takes forever to open bookmarks and also hangs when I try to open anything within firefox I have used firefox since it started on 32 bit systems until I installed it on my 64 bit a week ago and have had this problem and others since, are we going to get a 64 bit firefox

    Thanks for getting back to me Dave! 
    The file is about 91 MB in size, with just under 400 scanned pages. 
    I’ve also encountered the problem when I’ve tried to OCR one of these old books.  I’ve had to do it 50-100 pages at a time, closing and re-opening the file each time.
    Based on my online search for a solution, I had concluded that the 2 GB limit for 32-bit programs was the most likely source of the problem.  But I’m wondering now if Acrobat could use 2 GB  in processing a 91 MB file.

  • Memory leak? Firefox won't load pages/open.

    Ok, I believe there is a memory leak. I am surfing ok then a page wont load. I go to taskmgr and I show that one firefox has 104,990 K of memory. The rest have at most 3,000K. After the page won't load I close Firefox. It won't open. I have to turn on PC and unplug to get it to open again.

    This issue can be caused by an extension or plugin that isn't working properly.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • FireFox won't load pages, but IE explorer can.

    This happens at random times when I have 2 separate windows open. When I'm trying to load a page, the browser either won't load or it's taking too long to respond to the connection. The only way I can resolve is by closing and open FireFox. But then I have to forcefully close the exe file under task manager(in which I don't like to do in most cases.) or restart my PC and it's really becoming annoying.
    Any permanent solutions for this? Thanks in advance.
    I'm running Windows XP SP 3 Home Edition with a Dell btw,

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Firefox 4 won't load pages, can't connect to websites on mac

    After installing Firefox 4, I've had nothing but problems. Sometimes websites load, then next time they can't connect. I've tried a number of solutions, nothing is working. Hotmail can't connect, weather.com won't load correctly. All updates are done, I've uninstalled and reinstalled it a few times. I'm using an imac all up to date.
    If I switch to Safari now, the same pages won't load there either. None of this happened until I updated Firefox. However, there were a couple of websites like ehow.com and woot that always gave me issues, but now if I click on a link it typically won't take me to the new page. It has also crashed twice tonight. I have no anti-virus anymore after deleting iantivirus last week.

    I have a similar problem. After browsing for a while Firefox will stop loading pages for me on my Macbook Pro. This happens several times a day. In order to fix it I have to restart FF. This is brand new since upgrading to FF4. I've never had this problem before.
    My work involves a lot of Internet use and this is becoming a nuisance quite fast.

  • Firefox won't load pages, but other browsers will.

    Firefox won't load any internet pages, but different browsers, both Chrome and Explorer work, I havent tried others. I've un-installed, changed the name of the folder of the plug-ins that were left so it wouldn't recognize them, then re-installed nothing happened. I've checeked for viruses, proxies, and i'm pretty sure its not a firewall, I think we only have one and I checked it, plus there is no prompt asking me if I want to allow firefox to access the internet. It won't run in safe mode, so its not any add-ons, clearing the cache didn't do anything either. Its also not in offline mode. What else could it be?

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Firefox 33 linux mint: in full screen no right mouse, no page down and F11 doesn work

    in full screen sometimes my right mouse doesn work.
    Many times F11 doesn't work and I have to enter/exit full screen through the menu.
    PageUp / PageDown keys don always work in sull screen
    firefox 33.0 for linux mint 1.0

    Note that keyboard shortcuts do not work if a plugin (media player) has focus, so you can try to click elsewhere on the web page or in the user interface to see if that helps.

  • Safari & Firefox: Won't load pages with images

    Everything was working fine one night, and then the next, I couldn't load any pages with graphics. The one caveat: Google loads without a problem, even a Google image search. Every other site, including Apple.com, either won't load at all, or will begin to load until it encounters and image, and then hangs. Thoughts?
    I've seen similar posts, but none of them really apply, and the only one that did, didn't have an answer.

    Every other site, including Apple.com, either won't load at all, or will begin to load until it encounters and image, and then hangs.
    You're saying that, in addition to images not loading, pages are loading slowly or not at all, as well?
    If this is the case, then the problem isn't isolated to images. It sounds more like a problem accessing web pages altogether.
    As a troubleshooting measure, try setting fixed DNS addresses, either in your router's configuration or in System Preferences -> Network. For the latter, click on the network connection that you use, e.g. "Airport" or "Ethernet," then click on the Configure button. Click on the TCP/IP tab and enter a pair of fixed DNS addresses in the section with that label, as follows:
    208.67.222.222
    208.67.220.220
    You can copy and paste those directly from this forum into that DNS address field.
    (Those are OpenDNS addresses, available for use by anyone. DNS addresses are the addresses of servers that tell your web browser where to look when you type a web page address in your web browser.)
    If that doesn't work, the problem lies somewhere else. But your symptoms (slow or no page loads; and even when pages load, images not loading) sound a lot like the DNS problems I had before I started using alternate DNS addresses.

Maybe you are looking for

  • The question about Interface Mapping in BPM

    Hello, I am a few confused about  an Interface Mapping in BPM at the Design step. I have a task to transmit and trasform two messages of two sender file adapter to  two IDOCs messages and then to send them to SAP system. I use BPM. But I don't unders

  • Elementary question on Logical SQL subquery

    Hello. I am a newbie using Oracle Business Intelligence Product Version 10.1.3.4.1 (Build 090414.1900). I am trying (and failing) to get something such as this accepted by Answers -> Set SQL - SELECT      A.saw_1     saw_0,      SUM(1)     saw_1 FROM

  • Stage Play Format in an iBook?

    Hello, I'm creating an eBook (in all formats: ePub, PDF, iBook and maybe even .MOBI) for a client and I'm trying to figure out how to format it.  It's an original stage play (theatrical...you know, like Shakespeare) that she'd like to sell and distri

  • Oracle public yum down?

    Hi, I'm trying to install a new oracle database server and am doing the prereqs. I'm following this guide http://www.oracle-base.com/articles/11g/oracle-db-11gr2-installation-on-oracle-linux-5.php and when I go to http://public-yum.oracle.com/ I get

  • WS-SDK Drill Functions

    If I have a Webi document with 2 report tabs ("Crosstab" and "Customer")  and I enter Drill mode on the default report ("Crosstab") I notice I get a "new" temporary report-tab called "Crosstab(1)" and all of the drill actions take place on this tempo