Firefox with GoogleDocs, "Your browser does not allow access to your computer's clipboard." Solution?
This question was asked two months ago and never solved, so I thought I'd bring it up again, as it's new to me and perhaps Firefox has changed since then. I know it's Google, but as it pokes at Firefox, thought I'd take a shot. This is the previous question:
[[https://support.mozilla.com/en-US/questions/867479?s=firefox+access+to+clipboard&r=3&as=s|Previous question]]
Basically, when using GoogleDocs with a right-click cut/copy and paste, it doesn't function. I get the error message above: "Your browser does not allow access to your computer's clipboard." It's as simply broken as that. I recently had an issue in Firefox with the clipboard that required a system restore to solve, so that may be related.
I have done three different virus/malware scans on my computer, and everything comes back clean. Which it should be, as I'm a very careful user.
Yes, that was the first thing that I tried. I really couldn't get it to do... anything useful at all. So I'm guessing it's somehow different in detail, though the question is the same; Firefox vs. the Windows clipboard. It's difficult of course, when working with Google, to figure out where Firefox's code issues end and Google's overblown invasive code begins.
At any rate, no, that extension did not help. But thank you for the suggestion.
I'm sure that there's a solution out there somewhere....
Similar Messages
-
Since I did the Firefox reset, I try to open my email and it says, Your browser does not accept cookies. I have checked and done your suggested setting 100 times!
Note that a reset tries to migrate cookies to the new profile, so if you had previously as problem with cookies then the problem might have been carried over.
If clearing cookies doesn't work then it is possible that the <i>cookies.sqlite</i> file that stores the cookies is corrupted.
Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookie files like <b>cookies.sqlite-journal</b> in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies -
I have been using Firefox for a long time as my browser and typically play Pandora while at my office most days. For the first time today I received a pop up message "Pandora believes your browser does not support modern SSL/TLS. Consider upgrading your browswer" when I logged on to Pandora. I checked and I am on the latest version of Mozilla Firefox. I am unable to control volume or log out of Pandora now. I did some google searches and found Mozilla disabled ssl3.0 due to a "Poodle" attack. Does that mean that I can no longer use Firefox as my browser when I want to listen to music on Pandora or is there "a fix"? Thanks!
Mozilla Firefox as of Firefox 34 has the vulnerable SSL 3.0 disabled and only allows for TLS 1.0 at minimum to 1.2 now.
https://blog.mozilla.org/security/2014/10/14/the-poodle-attack-and-the-end-of-ssl-3-0/
So Pandora is incorrect if they believe Firefox is not safe to use.
Actually Pandora potentially needs to do a bit of upgrading themselves.
https://www.ssllabs.com/ssltest/analyze.html?d=www.pandora.com&s=208.85.40.50 -
Error - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode
This is a NOSCRIPT PROBLEM and NOT a Firefox problem.......
when disabled it works JUST FINEError - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode
This is a NOSCRIPT PROBLEM and NOT a Firefox problem.......
when disabled it works JUST FINE -
I started using Story a few months ago. While writing a script (very proud of it's potential) I was past page 20 I believe, to my own demise I only backed it up around page 9 using a word document. My Hard Drive died and had to be replaced. While trying to save all my files before I took it to the apple store I went to grab my adobe story file and couldnt. So, I tried to log in and got this "Sorry, your Story Free subscription does not allow access to this application. Please upgrade your subscription." I went to the online-version and my story was not there. Thus, I am very angry that I lost my script because out of the blue my subscription no longer allowed me to use Adobe Story on my Macbook Pro.
Nevertheless, I have been unsuccessfully trying to re-open Adobe Story on my newly restored HD and I still get the same message.
If you could help me with what needs to be done, that would be swell.
Thanks.Yup I was working on my script on Adobe Story, without problems, I was
unable to retrieve the file to save it. My Hard Drive has since been
erased and now I am working on a new HD.
I did re-install CS6. All my other Adobe programs work. The online
version of Story seems to work but every time I sign in using my Adobe ID
it gives me that message. :/ The thing is I never had a subscription so im
quite confused why it's telling me my subscription no longer allows me to
use Story without upgrading and spending oodles of money.
Thanks!
Harriett McFarlane -
Warning your browser does not accept script's cookies
I get this error:
Warning your browser does not accept script's cookies
Ok, and this means what?!
I just installed The latest MySQL, and PHP... for my server, and the message above is what I get now when I attempt to log into my own server, though localhost, or even 127.0.0.1... Are you telling me that because of this configuration that Safari can't handle the latest of either or both?
Or is there anything else that may be causing the problems? I have it so it accepts cookies from the site only... so there is no excuse as far as I can tell for this bugaboo...
Anyone got a clue, and a sollution in why this is happening at all?Hi Matthew,
Do you run/repair Permissions as you'r supposed to before & after updates & installations,wiyh DU.Utility ? Also there is an updates to 10.4.2 for Tiger & two 2005-007 Security updates,though I would advise that you read about those,the first breaks the 64 bit (whatever that may mean is in WikIpedia.com?) *again read about Sec.Updte before installing them.
You must know *
Gullivers
Gulliver, "kmosx3: Mac OS X 10.3/10.4: System maintenance", 06:15am Mar 27, 2004 CDT
Travis A.
Travis A., "Regular Maintenance / General Troubleshooting", 05:01pm Apr 23, 2004 CDT
also Tom X ,post just saw this a bit ago:
Tom_X, "How to reinstall Safari 1.3 (v312) - Mac OS X (10.3.9)", 08:03am Jul 7, 2005 CDT
Hope these help.
Eme -
Telegraph app does not allow access to newspaper. Says. Have not paid sub but pay via iTunes Store. Telegraph says it is an iTunes prob but I can't get to talk to anyone there! Any suggestions please?
Just got this -
Dear iTunes Customer,
You recently received an email informing you that your iTunes Match Subscription could not be auto-renewed. We have resolved the problem and your iTunes Match Subscription has been renewed.
We apologize for the delay with your auto-renewal. If you have any questions, please contact AppleCare at http://www.apple.com/support/itunes/
I hope everyone else is all set too. -
Your account does not have access to the forums system.
Greetings, My name is Jeff, I'm from Netwrix Corporation, which is a Microsoft partner. I have a problem with accessing Microsoft TechNet forum. After signing-in to my account: [email protected], I go to TechNet
forum, and get a message that: "Your account does not have access to the forums system." And also I've noticed that all my posts were deleted from TechNet forums. Can moderators tell me why did that happen? Why didn't I receive any warning
about my account suspension?
I've already submitted 2 tickets to MSDN Site Feedback Inquiry but didn't receive any answer.
I've called Microsoft TechNet at 800-344-2121 and Professional
Support team at 1-800-936-5800. But everybody send me to the MSDN Site Feedback Inquiry from which I didn't get any answer.
Anybody can help me with my problem?Hi,
Is this the profile you're referencing?
http://social.technet.microsoft.com/Profile/netwrix
It doesn't appear to be banned, but you're definitely right about there being no activity listed.
I'd suggest contacting the forums team directly by sending an email to fissues (at) microsoft [dot] com. The admins do monitor this forum, so you'll probably get a response here as well.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing) -
I am trying to access my calender in the app Planner Plus and I get the message. "This app does not have access to your calendars." You can enable access in Privacy Settings. But when I go to Privacy Settings, there are no apps listed under Calendar. Anyone?
Oh my gosh. This worked perfectly!!!
After allowing the changes, I just had to open the apps again (such as Instagram), then the pop-up asking to allow access to Photos appeared!
And I thought I was going to get rid of my iPhone 4 already because of the issue. -
Everytime I open my setting, safari or any app that needs the internet my ipad blinks out and does not allow me access.
1. Double-click the Home button to reveal the Task Bar
2. Hold the Safari app down for a second or two until you see the minus sign
3. Tap the minus sign to close Safari
4. Re-launch and test Safari -
Safari Does Not Allow Access to Web Sites With Wildcard X.509 Certificates
I'm really getting irritated with the Safari browser in OSX Mavericks. One of the more irritating features involves the inability to access web sites that use improperly constructed wildcard X509 certificates. By improperly constructed, I mean that the X.509 certificate does not contain the host name of the system being accessed in the Subject Alternate Name list.
Earlier versions of Safari would, at least, allow me to examine the X.509 certificate and determine whether I wanted to proceed with the connection. The current version of Safari doesn't provide that option. It simply displays a screen stating that it can't establish a secure connection to the web site. If you actually have a need to access the web site, you need to use a web browser like Firefox.
What's really irritating about this is that Safari had improved to the point where it was reliable enough to be used as the default browser.
Is there a Safari.plist setting that will allow me to change the behavior of Safari when it encounters an improperly constructed X.509 certificate and provide me the opportunity to examine the certificate to decide whether to proceed or not?Hi
Have a look in your Networks panel in System Preferences. Click on the Advanced button, then Proxies. There may be an errant proxy present blocking the site load. -
Hi,
I have a table with many LONG fields (28). So far, everythings works fine.
However, if I add another LONG field I cannot insert a dataset anymore
(29 LONG fields).
Does there exist a MaxDB parameter or anything else I can change to make inserts possible again?
Thanks in advance
Michael
appendix:
- Create and Insert command and error message
- MaxDB version and its parameters
Create and Insert command and error message
CREATE TABLE "DBA"."AZ_Z_TEST02"
"ZTB_ID" Integer NOT NULL,
"ZTB_NAMEOFREPORT" Char (400) ASCII DEFAULT '',
"ZTB_LONG_COMMENT" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_00" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_01" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_02" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_03" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_04" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_05" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_06" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_07" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_08" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_09" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_10" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_11" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_12" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_13" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_14" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_15" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_16" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_17" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_18" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_19" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_20" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_21" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_22" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_23" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_24" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_25" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_26" LONG ASCII DEFAULT '',
PRIMARY KEY ("ZTB_ID")
The insert command
INSERT INTO AZ_Z_TEST02 SET ztb_id = 87
works fine. If I add the LONG field
"ZTB_LONG_TEXTBLOCK_27" LONG ASCII DEFAULT '',
the following error occurs:
Auto Commit: On, SQL Mode: Internal, Isolation Level: Committed
General error;-7032 POS(1) SQL statement not allowed for column of data type LONG
INSERT INTO AZ_Z_TEST02 SET ztb_id = 88
MaxDB version and its parameters
All db params given by
dbmcli -d myDB -u dbm,dbm param_directgetall > maxdb_params.txt
are
KERNELVERSION KERNEL 7.5.0 BUILD 026-123-094-430
INSTANCE_TYPE OLTP
MCOD NO
RESTART_SHUTDOWN MANUAL
SERVERDBFOR_SAP YES
_UNICODE NO
DEFAULT_CODE ASCII
DATE_TIME_FORMAT INTERNAL
CONTROLUSERID DBM
CONTROLPASSWORD
MAXLOGVOLUMES 10
MAXDATAVOLUMES 11
LOG_VOLUME_NAME_001 LOG_001
LOG_VOLUME_TYPE_001 F
LOG_VOLUME_SIZE_001 64000
DATA_VOLUME_NAME_0001 DAT_0001
DATA_VOLUME_TYPE_0001 F
DATA_VOLUME_SIZE_0001 64000
DATA_VOLUME_MODE_0001 NORMAL
DATA_VOLUME_GROUPS 1
LOG_BACKUP_TO_PIPE NO
MAXBACKUPDEVS 2
BACKUP_BLOCK_CNT 8
LOG_MIRRORED NO
MAXVOLUMES 22
MULTIO_BLOCK_CNT 4
DELAYLOGWRITER 0
LOG_IO_QUEUE 50
RESTARTTIME 600
MAXCPU 1
MAXUSERTASKS 50
TRANSRGNS 8
TABRGNS 8
OMSREGIONS 0
OMSRGNS 25
OMS_HEAP_LIMIT 0
OMS_HEAP_COUNT 1
OMS_HEAP_BLOCKSIZE 10000
OMS_HEAP_THRESHOLD 100
OMS_VERS_THRESHOLD 2097152
HEAP_CHECK_LEVEL 0
ROWRGNS 8
MINSERVER_DESC 16
MAXSERVERTASKS 20
_MAXTRANS 288
MAXLOCKS 2880
LOCKSUPPLY_BLOCK 100
DEADLOCK_DETECTION 4
SESSION_TIMEOUT 900
OMS_STREAM_TIMEOUT 30
REQUEST_TIMEOUT 5000
USEASYNC_IO YES
IOPROCSPER_DEV 1
IOPROCSFOR_PRIO 1
USEIOPROCS_ONLY NO
IOPROCSSWITCH 2
LRU_FOR_SCAN NO
PAGESIZE 8192
PACKETSIZE 36864
MINREPLYSIZE 4096
MBLOCKDATA_SIZE 32768
MBLOCKQUAL_SIZE 16384
MBLOCKSTACK_SIZE 16384
MBLOCKSTRAT_SIZE 8192
WORKSTACKSIZE 16384
WORKDATASIZE 8192
CATCACHE_MINSIZE 262144
CAT_CACHE_SUPPLY 1632
INIT_ALLOCATORSIZE 229376
ALLOW_MULTIPLE_SERVERTASK_UKTS NO
TASKCLUSTER01 tw;al;ut;2000sv,100bup;10ev,10gc;
TASKCLUSTER02 ti,100dw;30000us;
TASKCLUSTER03 compress
MPRGN_QUEUE YES
MPRGN_DIRTY_READ NO
MPRGN_BUSY_WAIT NO
MPDISP_LOOPS 1
MPDISP_PRIO NO
XP_MP_RGN_LOOP 0
MP_RGN_LOOP 0
MPRGN_PRIO NO
MAXRGN_REQUEST 300
PRIOBASE_U2U 100
PRIOBASE_IOC 80
PRIOBASE_RAV 80
PRIOBASE_REX 40
PRIOBASE_COM 10
PRIOFACTOR 80
DELAYCOMMIT NO
SVP1_CONV_FLUSH NO
MAXGARBAGECOLL 0
MAXTASKSTACK 1024
MAX_SERVERTASK_STACK 100
MAX_SPECIALTASK_STACK 100
DWIO_AREA_SIZE 50
DWIO_AREA_FLUSH 50
FBM_VOLUME_COMPRESSION 50
FBM_VOLUME_BALANCE 10
FBMLOW_IO_RATE 10
CACHE_SIZE 10000
DWLRU_TAIL_FLUSH 25
XP_DATA_CACHE_RGNS 0
DATACACHE_RGNS 8
XP_CONVERTER_REGIONS 0
CONVERTER_REGIONS 8
XP_MAXPAGER 0
MAXPAGER 11
SEQUENCE_CACHE 1
IDXFILELIST_SIZE 2048
SERVERDESC_CACHE 73
SERVERCMD_CACHE 21
VOLUMENO_BIT_COUNT 8
OPTIM_MAX_MERGE 500
OPTIM_INV_ONLY YES
OPTIM_CACHE NO
OPTIM_JOIN_FETCH 0
JOIN_SEARCH_LEVEL 0
JOIN_MAXTAB_LEVEL4 16
JOIN_MAXTAB_LEVEL9 5
READAHEADBLOBS 25
RUNDIRECTORY E:\_mp\u_v_dbs\EVERW_C5
_KERNELDIAGFILE knldiag
KERNELDIAGSIZE 800
_EVENTFILE knldiag.evt
_EVENTSIZE 0
_MAXEVENTTASKS 1
_MAXEVENTS 100
_KERNELTRACEFILE knltrace
TRACE_PAGES_TI 2
TRACE_PAGES_GC 0
TRACE_PAGES_LW 5
TRACE_PAGES_PG 3
TRACE_PAGES_US 10
TRACE_PAGES_UT 5
TRACE_PAGES_SV 5
TRACE_PAGES_EV 2
TRACE_PAGES_BUP 0
KERNELTRACESIZE 648
EXTERNAL_DUMP_REQUEST NO
AKDUMP_ALLOWED YES
_KERNELDUMPFILE knldump
_RTEDUMPFILE rtedump
UTILITYPROTFILE dbm.utl
UTILITY_PROTSIZE 100
BACKUPHISTFILE dbm.knl
BACKUPMED_DEF dbm.mdf
MAXMESSAGE_FILES 0
EVENTALIVE_CYCLE 0
_SHAREDDYNDATA 10280
_SHAREDDYNPOOL 3607
USE_MEM_ENHANCE NO
MEM_ENHANCE_LIMIT 0
__PARAM_CHANGED___ 0
__PARAM_VERIFIED__ 2008-05-13 13:47:17
DIAG_HISTORY_NUM 2
DIAG_HISTORY_PATH E:\_mp\u_v_dbs\EVERW_C5\DIAGHISTORY
DIAGSEM 1
SHOW_MAX_STACK_USE NO
LOG_SEGMENT_SIZE 21333
SUPPRESS_CORE YES
FORMATTING_MODE PARALLEL
FORMAT_DATAVOLUME YES
HIRES_TIMER_TYPE CPU
LOAD_BALANCING_CHK 0
LOAD_BALANCING_DIF 10
LOAD_BALANCING_EQ 5
HS_STORAGE_DLL libhsscopy
HS_SYNC_INTERVAL 50
USE_OPEN_DIRECT NO
SYMBOL_DEMANGLING NO
EXPAND_COM_TRACE NO
OPTIMIZE_OPERATOR_JOIN_COSTFUNC YES
OPTIMIZE_JOIN_PARALLEL_SERVERS 0
OPTIMIZE_JOIN_OPERATOR_SORT YES
OPTIMIZE_JOIN_OUTER YES
JOIN_OPERATOR_IMPLEMENTATION IMPROVED
JOIN_TABLEBUFFER 128
OPTIMIZE_FETCH_REVERSE YES
SET_VOLUME_LOCK YES
SHAREDSQL NO
SHAREDSQL_EXPECTEDSTATEMENTCOUNT 1500
SHAREDSQL_COMMANDCACHESIZE 32768
MEMORY_ALLOCATION_LIMIT 0
USE_SYSTEM_PAGE_CACHE YES
USE_COROUTINES YES
MIN_RETENTION_TIME 60
MAX_RETENTION_TIME 480
MAX_SINGLE_HASHTABLE_SIZE 512
MAX_HASHTABLE_MEMORY 5120
HASHED_RESULTSET NO
HASHED_RESULTSET_CACHESIZE 262144
AUTO_RECREATE_BAD_INDEXES NO
LOCAL_REDO_LOG_BUFFER_SIZE 0
FORBID_LOAD_BALANCING NO>
Lars Breddemann wrote:
> Hi Michael,
>
> this really looks like one of those "Find-the-5-errors-in-the-picture" riddles to me.
> Really.
>
> Ok, first to your question: this seems to be a bug - I could reproduce it with my 7.5. Build 48.
> Anyhow, when I use
>
> insert into "AZ_Z_TEST02" values (87,'','','','','','','','','','','','','','','',''
> ,'','','','','','','','','','','','','','','','')
>
> it works fine.
It solves my problem. Thanks a lot. -- I hardly can believe that this is all needed to solve the bug. This may be the reason why I have not given it a try.
>
Since explicitely specifying all values for an insert is a good idea anyhow (you can see directly, what value the new tupel will have), you may want to change your code to this.
>
> Now to the other errors:
> - 28 Long values per row?
> What the heck is wrong with the data design here?
> Honestly, you can save data up to 2 GB in a BLOB/CLOB.
> Currently, your data design allows 56 GB per row.
> Moreover 26 of those columns seems to belong together originally - why do you split them up at all?
>
> - The "ZTB_NAMEOFREPORT" looks like something the users see -
> still there is no unique constraint preventing that you get 10000 of reports with the same name...
You are right. This table looks a bit strange. The story behind it is: Each crystal report in the application has a few textblocks which are the same for all the e.g. persons the e.g. letter is created for. Principally, the textblocks could be directy added to the crystal report. However, as it is often the case, these textblocks may change once in a while. Thus, I put the texts of the textblock into this "strange" db table (one row for each report, one field for each textblock, the name of the report is given by "ztb_nameofreport"). And the application offers a menue by which these textblocks can be changed. Of course, the fields in the table could be of type CHAR, but LONG has the advantage that I do not have to think about the length of the field, since sometime the texts are short and sometimes they are really long.
(These texts would blow up the sql select command of the crystal report very much if they were integrated into the this select command. Thus it is realized in another way: the texts are read before the crystal report is loaded, then the texts are "given" to the crystal report (by its parameters), and finally the crystal report is loaded.)
>
- MaxDB 7.5 Build 26 ?? Where have you been the last years?
> Really - download the 7.6.03 Version [here|https://www.sdn.sap.com/irj/sdn/maxdb-downloads] from SDN and upgrade.
> With 7.6. I was not able to reproduce your issue at all.
The customer still has Win98 clients. MaxDB odbc driver 7.5.00.26 does not work for them. I got the hint to use odbc driver 7.3 (see [lists.mysql.com/maxdb/25667|lists.mysql.com/maxdb/25667]). Do MaxDB 7.6 and odbc driver 7.3 work together?
All Win98 clients may be replaced by WinXP clients in the near future. Then, an upgrade may be reasonable.
>
- Are you really putting your data into the DBA schema? Don't do that, ever.
> DBM/SUPERDBA (the sysdba-schemas) are reserved for the MaxDB system tables.
> Create a user/schema for your application data and put your tables into that.
>
> KR Lars
In the first MaxDB version I used, schemas were not available. I haven't changed it afterwards. Is there an easy way to "move an existing table into a new schema"?
Michael -
Strange problem with forms. browser does not send syn
We are having a strange problem and I hope someone can help (im
stumped).
setup
I have a webserver (iplanet 4.1 sp8) running in secure mode. It has a
weblogic nsapi plugin and forwards EVERYTHING over to an app server.
The app server runs weblogic 4.5 sp10 and hosts both servlets and
static html for an application we are developing.
customers load a long form and are given the ability to upload several
files, but upon pressing the submit button on the form (they must do
each file individually) we get an error message that the page cannot
be displayed.
upon investigation, I look at a tcp trace and find that when the
submit button is pressed, the browser sends an ack packet to the
netscape server and it responds (correctly IMO) with a rst flag.
Why doesn't the browser start communication with a syn/syn-ack/ack
sequence? The form appears to have been completely loaded.
To aggravate matters more, this problem does not always occur and
clearing the browser's cache seems to aggravate it.
I would appreciate ANY help that could be offered.
sorry for the long post,
-Chris
Chris Regenye
Supervisor Systems Services
PR Newswire
[email protected]In article <[email protected]>,
Chris Regenye <[email protected]> wrote:
Barry Margolin <[email protected]> wrote in message
news:<vzdh7.8$5%1.649@burlma1-snr2>...
In article <[email protected]>,
Chris Regenye <[email protected]> wrote:
We are having a strange problem and I hope someone can help (im
stumped).
setup
I have a webserver (iplanet 4.1 sp8) running in secure mode. It has a
weblogic nsapi plugin and forwards EVERYTHING over to an app server.
The app server runs weblogic 4.5 sp10 and hosts both servlets and
static html for an application we are developing.
customers load a long form and are given the ability to upload several
files, but upon pressing the submit button on the form (they must do
each file individually) we get an error message that the page cannot
be displayed.
upon investigation, I look at a tcp trace and find that when the
submit button is pressed, the browser sends an ack packet to the
netscape server and it responds (correctly IMO) with a rst flag.
Why doesn't the browser start communication with a syn/syn-ack/ack
sequence? The form appears to have been completely loaded.It may be trying to reuse a persistent connection, as recommended in
HTTP/1.1.Great, but the server obviously doesn't believe this is the case. Any
idea how to correct this situation? also... as I mentioned this
problem is intermittant(sp?). When it does not occur, tcp
communications are normal.It sounds like the bug is in the browser. When it gets the RST, it should
realize that the old connection has been dropped (even if a server
implements persistent connections, like it should, it's allowed to close
idle connections after a timeout or if it's running out of resources).
When that happens it should automatically retry on a new connection.
This might explain why the problem is intermittent. The browser is happy
when the connection has remained open, but it doesn't handle the occasional
cases where the server has closed the connection unexpectedly.
Barry Margolin, [email protected]
Genuity, Woburn, MA
*** DON'T SEND TECHNICAL QUESTIONS DIRECTLY TO ME, post them to newsgroups.
Please DON'T copy followups to me -- I'll assume it wasn't posted to the group. -
Browser does not allow page refresh after Commit!
Hello everyone, I am using JDeveloper 11.1.2.3.0
I am having a big problem here. I create a simple page and insert a form, a createInsert button and a commit button for example. I run this page and everything is fine. I create a new record, fill the form fields and then commit. In this moment if I press F5 to reload the page, the browser asks me for confirmation "To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier." I don't understand why it has to repeat any action, I checked for dirty transactions after the commit operation and transactions are clean. If I move from this page to another and back to first it works fine, F5 refreshes without problem.
If I have a table with multiple rows and I update first row for example, and then click the third row and then perform a refresh (Confirm on above message), the third row will obtain the obtain all the information of the first row...
Does anyone know how to deal with this problem?Ok I found the real problem and solution to this. As I said reopening the page does not bring any problem, but only hitting F5 does. My 'submit' and 'commit' buttons had 'partialSubmit=false' which should perform a total page submit in this case. Apparently this is not "detected" by the browser when pressing F5 although submission is performed. Changing 'partialSubmit=true' to the buttons did the trick. Tung
-
IP Address Added But still does not allow access
I have a laptop that I take around Australia. When I'm in a hotel I link to the interest via my mobile phone using its hotspot feature. This allows me to gain access to the internet with no problem.
When I go to the allowed ip addresses section of Azure for my SQL Database the IP address in todays case shows me 101.173.255.250.
I click on the "Add to allowed IP addresses" and everything looks good.
I then go back to my Visual Studio project which creats a connection to the same database and I'm told that I can not connect and its because my IP address is not registered.
To check my IP address I go to http://checkip.dyndns.org/ and that site also tells me that my IP address is 101.173.255.250.
Can any one tell me what I'm doing wrong. Should not the IP address in the "allowed ip addresses" be correct and once registered gain me access.
Thanks in advance to anyone who can help. Been researching this issue off and on for the past month.Thanks for the steps. I have followed them and also deleted all firewall rules at the database level as well.
Once I had complete removing all rules, I add the IP address as in step 3 of your reply.
I then went to Visual Studio and clicked on the Tools>Connect to Database menu option. I received the following message: Cannot open server 'ir7oj6f24g' requested by the login. Client IP address '1.154.162.224' is not allowed to access the server...tracking
ID '91af1717-9066-43b3-b69f-2db393a24a25'
In the Management Portal the IP address that said that it was my IP address was 101.172.127.226 which I added in step 3.
The thing that does not make any sense is that I was able to gain access to the Management Portal for this database and execute queries against this database. I'm confused.
Regards
Steve
Maybe you are looking for
-
The cost of developing an MHP application
I have had for some years an ambition that an MHP application can become written in Java and put into use, an MHP application which implements some of my ideas about a generic application. The generic application which would be produced would accept
-
Acrobat X Pro doesn't install on Win XP
Hello, I have recently purchased 5 licences of Acrobat X Pro and downloaded the application from the website. However, once I attempt to install it, i get this (screenshot below) and install gets aborted. Here is screenshot of my computer configurati
-
How to I lock a file so that it can't be editored by someone else?
I have done a large file for a sign and I don't want the sign company to be able to edit the file. The image is 3m x 1m so it's a large file.
-
hi guys, in my script i have to disply total value . fields are gross weight & quantity, for this where should i write code for this value in print program.
-
Hi all, I got a problem when i created customized info structure. This info structure is not getting data.Update mode is disabled.That means in OMO1 under updating tab 1."NO UPDATING" 2.Synchronous updating(1) 3.Asnnchronous updating(2) 4.Asnnchronou