TS1702 Telegraph app does not allow access to newspaper says have not paid subscription. Paid through iTunes and tel says it is iTunes prob. Can't talk to anybody at itunes

Telegraph app does not allow access to newspaper. Says. Have not paid sub but pay via iTunes Store. Telegraph says it is an iTunes prob but I can't get to talk to anyone there! Any suggestions please?

Just got this -
Dear iTunes Customer,
You recently received an email informing you that your iTunes Match Subscription could not be auto-renewed. We have resolved the problem and your iTunes Match Subscription has been renewed.
We apologize for the delay with your auto-renewal. If you have any questions, please contact AppleCare at http://www.apple.com/support/itunes/
I hope everyone else is all set too.

Similar Messages

Firefox with GoogleDocs, "Your browser does not allow access to your computer's clipboard." Solution?

This question was asked two months ago and never solved, so I thought I'd bring it up again, as it's new to me and perhaps Firefox has changed since then. I know it's Google, but as it pokes at Firefox, thought I'd take a shot. This is the previous question:
[[https://support.mozilla.com/en-US/questions/867479?s=firefox+access+to+clipboard&r=3&as=s|Previous question]]
Basically, when using GoogleDocs with a right-click cut/copy and paste, it doesn't function. I get the error message above: "Your browser does not allow access to your computer's clipboard." It's as simply broken as that. I recently had an issue in Firefox with the clipboard that required a system restore to solve, so that may be related.
I have done three different virus/malware scans on my computer, and everything comes back clean. Which it should be, as I'm a very careful user.

Yes, that was the first thing that I tried. I really couldn't get it to do... anything useful at all. So I'm guessing it's somehow different in detail, though the question is the same; Firefox vs. the Windows clipboard. It's difficult of course, when working with Google, to figure out where Firefox's code issues end and Google's overblown invasive code begins.
At any rate, no, that extension did not help. But thank you for the suggestion.
I'm sure that there's a solution out there somewhere....

Sorry, your Story Free subscription does not allow access to this application. Please upgrade your s

I started using Story a few months ago. While writing a script (very proud of it's potential) I was past page 20 I believe, to my own demise I only backed it up around page 9 using a word document. My Hard Drive died and had to be replaced. While trying to save all my files before I took it to the apple store I went to grab my adobe story file and couldnt. So, I tried to log in and got this "Sorry, your Story Free subscription does not allow access to this application. Please upgrade your subscription." I went to the online-version and my story was not there. Thus, I am very angry that I lost my script because out of the blue my subscription no longer allowed me to use Adobe Story on my Macbook Pro.
Nevertheless, I have been unsuccessfully trying to re-open Adobe Story on my newly restored HD and I still get the same message.
If you could help me with what needs to be done, that would be swell.
Thanks.

Yup I was working on my script on Adobe Story, without problems, I was
unable to retrieve the file to save it. My Hard Drive has since been
erased and now I am working on a new HD.
I did re-install CS6. All my other Adobe programs work. The online
version of Story seems to work but every time I sign in using my Adobe ID
it gives me that message. :/ The thing is I never had a subscription so im
quite confused why it's telling me my subscription no longer allows me to
use Story without upgrading and spending oodles of money.
Thanks!
Harriett McFarlane

I'm not allowed access to my own files...

Hello all,
Just talked to an Adobe person on the Chat, but he couldn't help me, he told me to get someone on the phone... on the phone, they told me they couldn't help me because my product was too old... they told me to come here and ask for help... now I just hope you guys aren't going to tell me you can't help me, because of some other sort of reason!
Here's my problem:
For a few years now, I use a CS2 for work, both on my office-computer and on my home computer.
Ever since I installed it, on one of the computers the updates of Adobe Acrobat keep popping up, but only get halfway. They start installing, announcing themselves: “Adobe is now installing Acrobat 7.1…” and suddenly, it stops and says: “Windows finds it impossible
to write onto the file C:\Program files\Adobe\Adobe Acrobat\Activex\AcroIEhelper.dll. Check if you have access to this file”.
It gives me the choice between “resume, ignore, or abort”. If I choose resume or ignore, the installation goes on till the end and I am asked to reboot. As if everything has gone well.
But it hasn’t. For when I do, after the computer’s started up again, instead of having an updated Acrobat, the update starts all over again:
“now installing Acrobat 7.1…” until the reboot, the same way again, and so ad infitum.
After a few times, I actually went checking in my computer for this location, to see what was wrong with this file on which Windows seemed to have so much trouble “writing onto”. I searched for the file called AcroIEhelper.dll, but found it wasn’t there… No wonder they couldn’t write anything on it, I thought!
I copied the file from my disk in the CS-box, and placed it exactly on the location it was supposed to be; at least, that’s what I tried to do,
but soon as I did, a box appeared saying: “You are not allowed to execute this transaction” (or something of the sort – I’m translating from
Dutch here). No matter howmany times I try, it always stops me, blocking my access.
It never says why, however.
So, the update is never really finished, I know that now, it's for lack of this blasted file. But I'm never allowed to put it where it belongs.
Ever since, each day when switching on my computer, the first thing I have to do is to stop this Adobe Acrobat update, which
stubbornly -and uselessly- starts installing, before I can start working. Every single day, and I am sick of it!
The computer it happens on is the second one I installed the CS on, it's a Vista. I don't think that's the problem, though. Would it?
I was assured I could install my CS on 3 systems, this was the second. The one in my office is an XP Pro.
Anybody can give me the answer to the refusal of this file? Why am I not allowed access to the files in my own computer? And is there a
way to MAKE the thing give me access?
Tanks for any help...

Thanks, Markerline. I couldn't reply this weekend, since I had omitted to send my login-password on this forum to my home-computer. It's at home I'm having the problem: over here at work, nothing bothers asking me if I want to be updated. (I don't even know whether I'm getting updated at all; I'm not allowed to experiment much whith this one, since I'm in the National network...
I think I've tried it most of the times from an ampty desktop. Nothing to do with Adobe nor anything else working yet. After all, the update is the first thing that pops up after startup; I have to abort it before I can start doing anything.
I'll try it again, after reading the articles you write about. I might find the answer if I learn more of what this IEhelperthingy is all about. It's really small, a few 5 MB or so; but it seems to be important enough to cause trouble.
If I never manage to force-squeeze it into the Adobe file, my only hope is to get rid of these eternal useless attempts to update to Acrobat 7.1. I'd be happy to go on working with number 6 or whatever I have right now, as long as I'm not constantly pestered by a never-ending update.
My old computer never told me I wasn't allowed to do what I wanted to it, the way this one does. I find it annoying! It makes me feel like it takes me for a fool....

HT5945 Java has updated again today, i use a jave plug in to run my virtual software to access my work from home, today i have an error message saying security will not allow access to my website that i use to log in to work from, this is a JREdetection e

Java has updated again today,
i use a java plug in to run my virtual software to access my work from home,
today i have an error message saying that security will not allow access to my website
i use to log in to work from, this is a JREdetection error,
my system runs off java and citrix, i tried chrome,firefox and safari - same issue, if my system cannot detect java it wont run, it runs on plug ins.
How to i change my sec settings to allow access to this website, as i can only see that i can add apps not web addresses?

If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
iPhone and iPod touch: About backups

Java daemon on boot: "This user is not allowed access to the window system right now."

The daemon is located in /Library/LaunchDaemons/ and launches successfully on most occasions. However, it sometimes fails to start with this error:
Nov 17 20:36:24 server.local java[28972]: This user is not allowed access to the window system right now.
Nov 17 20:36:24 server com.apple.launchd[1] (net.java.server): Throttling respawn: Will start in 10 seconds
I have the server command running as a background daemon using its "nogui" option (the developers claim to have written it to not display a gui). However, it seems that somewhere along the line, Java is trying to display something. As the daemon is running before users log in, it gives this error. Once a user is logged in to the system, it runs fine; however, logging in a user to run the server is not an option. It needs to run on boot.
Any ideas for how to solve this? I'm going to contact the developers to see if it may be something they can fix, but I want to be able to force the issue in case the problem ever occurs in the future.

Irrespective of any claims by the developer, this certainly appears to be a test case that shows that the tool is not working as expected, and that the application has a bug. This test case would be better if there was some evidence around why only some of the startups fail, but in general this will involve what's been suggested earlier: "Contact the application developer."
As some general background on what's involved, see daemons and agents and related; processes that are not allowed to connect to the GUI for reasons of security.
I'd also suggest testing your DNS, as seeing "server.local" can imply local DNS configuration errors. Launch Terminal.app from Applications > Utilities and issue the following harmless diagnostic command and see if it reports no changes, or if it detects network or DNS errors:
sudo changeip -checkhostname
If this is OS X Server and a NAT'd network, you do not want to reference any DNS servers located off of your NAT'd network.
Why DNS? Because DNS errors can cause only some operations to fail, particularly if there's more than one DNS server selected (and where some subset of the DNS servers are malfunctioning or misconfigured).

Illustrator CC - Tools not allowing access to drop-down options

Illustrator CC - Tools not allowing access to drop-down options
For example, I want to change the shape from rectangle to an oval, the press and hold on the rectangle shape (by default) will not give access to other shape options. Or, for another example, the text tool won't allow access to type on path options.
Can anyone help me out on this? I running a very new PC and Illustrator CC (latest copy).
Thanks,
BK

BK,
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

The 'Access-Control-Allow-Origin' header contains multiple values '*, *', but only one is allowed. Origin 'null' is therefore not allowed access.

Hello. I added custom http response headers to my SP site web config file as follows:
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Methods" value="POST,GET,OPTIONS" />
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Headers" value="Content-Type,Authorization" />
</customHeaders>
</httpProtocol>
When I try to call any web service, i get these headers two times each:
HTTP/1.1 200 OK
Cache-Control: private, max-age=0
Transfer-Encoding: chunked
Content-Type: application/atom+xml;type=entry;charset=utf-8
Expires: Sat, 01 Mar 2014 19:11:37 GMT
Last-Modified: Sun, 16 Mar 2014 19:11:37 GMT
ETag: "3"
X-SharePointHealthScore: 0
SPClientServiceRequestDuration: 20
SPRequestGuid: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
request-id: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
X-FRAME-OPTIONS: SAMEORIGIN
Persistent-Auth: true
Access-Control-Allow-Methods: POST,GET,OPTIONS
Access-Control-Allow-Origin: *
Access-Control-Allow-Headers: Content-Type,Authorization
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Access-Control-Allow-Methods: POST,GET,OPTIONS
Access-Control-Allow-Origin: *
Access-Control-Allow-Headers: Content-Type,Authorization
MicrosoftSharePointTeamServices: 15.0.0.4569
Date: Sun, 16 Mar 2014 19:11:37 GMT
and that gives me error from ajax: The 'Access-Control-Allow-Origin'
header contains multiple values '*, *', but only one is allowed. Origin 'null' is therefore not allowed access.
The 'Access-Control-Allow-Origin' header contains multiple values '*, *', but only one is allowed.
Origin 'null' is therefore not allowed access.
Any idea???

Hi Ann,
Please check whether there are duplicate custom headers in your code.
Similar issue for your reference:
http://social.msdn.microsoft.com/Forums/office/en-US/b79b75f4-b46b-46ae-ae29-17a352b6b90b/custom-http-response-headers-for-sp-2013-shown-2-times?forum=sharepointdevelopment
Regards,
Rebecca Tu
TechNet Community Support

[Solved]gnome-system-tools You are not allowed access to sys config

I did a FTP install of i686 Arch Linux on a friend's machine. I could not get gnome-system-tools to work, keep getting:
The configuration could not be loaded
You are not allowed access to the system configuration
So, I tried gnome-system-tools on an i686 Arch install on my machine, and gnome-system-tools worked. Then I did a pacman -Syu and fully updated the system. The updates included udev which now prints how long udev events took on boot up. After the updates, gnome-system-tools no longer works. Same symptoms as the new install.
Both machines have stbd in the /etc/rc.conf DAEMONS line. Both the user and root in both machines are part of the stb-admin group. Using gksu or launching as root in a terminal window results in the same problem. The problem seems to be in system-tools-backends which works in conjuntion with dbus as I get this error:
(time-admin:7607): Liboobs-WARNING **: There was an unknown error communicating with the backends:
Process /usr/share/system-tools-backends-2.0/scripts/SystemToolsBackends.pl exited with status 127
gnome-system-tools and system-tools-backends are part of the community group, so as far as I know, writing a bug report is out. Both gnome-system-tools and system-tools-backends are out of date in community. system-tools-backends is version 2.4.1 and the current version is 2.6.0. I tried using makepkg to compile the new 2.6.0 version of system-tools-backends but it fails saying it needs dbus >= 1.1.2 but version of dbus is 1.0.2. So it appears that dbus is out of date also. That is a far as I got.
I know this has been a problem in the past, but I got it working until this latest update.
Anyone got any ideas on this?
Pudge
Last edited by Pudge (2008-03-23 15:35:29)

Pudge wrote:
When I entered the Original Post, I had rebuilt gnome-system-tools as this had fixed the problem the last time. When I went to rebuild system-tools-backends, I had decided I needed to try and build the latest version of it, which didn't work as stated above. By this time the lateness of the hour, and the current frustration level caused me to quit for the night and write this thread. I am fairly sure I did NOT rebuild the current system-tools-backends.
Anyway, deleting gnome-system-tools and system-tools-backends, then rebuilding the current version of both gnome-system-tools and system-tools-backends fixed the problem. Be sure to follow the post installation comments from system-tools-backends.
I wrote a bug report in the AUR.
Bug Report
Thanks for everybody's help and suggestions.
Pudge
I've had the same problem with my users-admin and users-time... I've tried all the fixes from most of these posts... except for that string of code that someone wrote in this post: http://bbs.archlinux.org/viewtopic.php?id=42910
for file in `pacman -Ql gnome-system-tools | grep desktop | cut -d" " -f2`; do cat $file | sudo sed 's/$^Exec=$$.*-admin$/\1gksudo \2/g' | sudo tee temp.desktop.tmp; sudo mv temp.desktop.tmp $file; done
I wasn't sure what this string actually would do, so I haven't tried it yet. I figured there would be an easier way of fixing this problem. Like a simple edit in the SystemToolsBackends.pl file.....
any help would be cool.

I have my personal music (not purchased from Itunes) stored in two locations, on my PC and on an external HD. How can I find out which directory itunes uses to access this music? I am using Itunes version 11.4.0.18. Thanks

I have my personal music (not purchased from Itunes) stored in two locations, on my PC and on an external HD. How can I find out which directory itunes uses to access this music? I am using Itunes version 11.4.0.18. Thanks

Many thanks JEM24 for your help. Ive just spent the best part of six hundred pounds on a new Sony Rx100m2 compact camera, so I have no interest in the Ipods camera at all really. I doubt Ill be watching many videos on it as Im very lucky in that I have a good Android tablet. Its more as a stock music player that Ill be buying the Ipod for, if indeed I do end up buying one. I dont like the idea of paying the exorbitant amount added for more memory space that Apple along with most other companies charge. In fact I read an article on this very subject just yesterday in the tech section of Flipboard. It stated in the article that in the case of the Iphone the actual cost of each additional gigabyte of storage to Apple et al is something in the order of 60p.. This is certainly not reflected in the price us the customer has to pay at the till.. Its for this reason primarily that Apple in particular, because their products do not allow adding expandable memory of your own in the form of cheap to buy cards, that nobody in their right mind buys the 64gig etc Iphones..I am aware that we are discussing my potential purchase of an Ipod Touch here but you see my point. Many thanks again though for helping me.

My messages on OS mountain lion are apperaring all blank and its not allowing me to send any Imessages, it will let me type it and as soon as i hit enter it disappears somewhere. I have updated my software and this hasn't helped! Thanks

My messages on OS mountain lion are apperaring all blank and its not allowing me to send any Imessages, it will let me type it and as soon as i hit enter it disappears somewhere. I have updated my software and this hasn't helped! Thanks

what a long post....Apple, btw, does not read this stuff, so ranting, raving, and complaining here might make you feel good, but it does no good at all. That being said, I, too have a Mac Pro Quad Core Xeon with 6 gigs of ram and an nVidia 8800 GT graphics card (not as good as yours, alas) and I've had no problems at all with it. Yes, it doesn't have Thunderbolt, but maybe we Mac pro owners will get lucky and someone will come out with an adapter (probably not). No, you probably don't have to throw away your Mac Pro, but if you do, I'll take it, for a small "recycling" fee >:-) That was a joke. Yes, the Mac Pro's future isn't quite clear, YET. Hopefully that will improve very soon. As for not being able to upgrade to Mountain Lion. Don't worry about that too much, Nobody is forcing you to do that. Your Mac Pro won't quit working if it isn't installed. From what I've heard, you should give the new OS a chance, and wait to get it, in case there might be some bugs, or stuff not working with the new OS, which has been known to happen. Yes, we Mac Pro owners don't like being treated like mushrooms-kept in the dark, and being fed......... but Apple is Apple and it will do what it does, and there is nothing you or me can really do to change that. All I can say is....trust, have faith, be patient, go for a walk, do something else to take your mind off of this problem. IF apple decides to drop the Mac Pro for good, and that's a big "IF", I think they will anger a whole bunch of people
which isn't good. However, that hasn't happened...YET. Let us hope that it doesn't
John B

HT4906 I am not able to send my photos from my IPhone to my Mac. I went to my Cloud preferences and it is not allowing me to click on Photo Stream. When I went to updates it says I am updated.

I am not able to send my photos from my IPhone to my Mac. I went to my Cloud preferences and it is not allowing me to click on Photo Stream. When I went to "updates" is says I am updated.

with no information no one can help
what versions of software? have you followed the directions in this article - http://www.apple.com/icloud/setup/
LN

Installed 11.0.3 today. Tried to update apps. iTunes response was, "You can not update this software since you have not owned the major version of this software." I REALLY don't understand. I paid for MANY applications and stole or borrowed NOTHING.

Installed 11.0.3 today. Tried to update apps. iTunes response was, "You can not update this software since you have not owned the major version of this software." I REALLY don't understand. I paid for MANY applications and stole or borrowed NOTHING.

Hi 969Polyglot969,
You may want to report an issue with the affected apps using the instructions in this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
I hope this helps!
- Ari

I downloaded the new version of iTunes 11.0.3 and now I get this error when I go to update Apps...any solutions???? You can not update this software since you have not owned the major version of this software.

You can not update this software since you have not owned the major version of this software.
any soultions???

Same here. Just becoming a nightmare. Updated iTunes and now can't update apps it itself is showing as available updates. Count me in on the latest "You can not update this software since you have not owned the major version of this software." bug.
Next I have to post about a new problem in iPhoto on a new thread.... it lost the "link" between some but not all photos I have in the library and what it itself posted to FaceBook a few hours ago...
Incredibly frustrating.
Imran

Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please.

Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please before I throw it through the window!

Grum12 wrote:
Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please before I throw it through the window!
Hi Grum,
If the formulas aren't filling to the new column, you must have changed something in the template since you first opened it. Numbers is rather fussy about filling row content in columns as they are added. Only rows with the same expression in every Body Column will fill when a column is added. Just as an experiment, start a new Employee Schedule document from the Template Chooser and then add a column by clicking the Add Column handle in the upper right corner of the table. If that works, as it should, then think about what might have changed in your working document to disconnect that feature. Maybe we can figure it out together.
Jerry

TS1702 Telegraph app does not allow access to newspaper says have not paid subscription. Paid through iTunes and tel says it is iTunes prob. Can't talk to anybody at itunes

Similar Messages

Maybe you are looking for