Firestarter logging - empty events tab

Does anyone know if there's an Arch "package update" for Firestarter on the horizon? - ie one that's going to fix the current empty "events tab" ??
It's not a huge problem checking /var/log/iptables.log, but would just be easier to have the events tab populated again.
Cheers.

Apart from not getting the events, i also am unable to add /change any rules.
This happened after a re-install with xorg 7.
Firestarter appears to be using sit0 for internal network interface.
[root@julius ~]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:02:44:95:E8:C6
inet addr:10.0.0.71 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::202:44ff:fe95:e8c6/64 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12410 errors:0 dropped:0 overruns:0 frame:0
TX packets:11440 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:13892466 (13.2 Mb) TX bytes:1304933 (1.2 Mb)
Interrupt:11 Base address:0x4000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:20 errors:0 dropped:0 overruns:0 frame:0
TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:840 (840.0 b) TX bytes:840 (840.0 b)
sit0 Link encap:UNSPEC HWaddr 00-00-00-00-31-00-00-00-00-00-00-00-00-00-00-00
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
It looks like sit0 is disabled, maybe this was changed in one of the updates ?
Anyone have an idea how to get sit0 active ?

Similar Messages

Empty Events

Man, this is the crappiest upgrade Apple has ever put out. I've solved a lot of issues by rebuilding the library, fixing permissions, etc. Importing photos is still flakey, and I've had to rebuild the library many times just to get newly imported photos to show up.
My current problem is that after the latest round of permission fixes, rebuilding, etc., I now have several Events that are empty. It just shows a generic illustration of the palm tree photo from the iPhoto application icon. The steps I took were to 1) repair permissions using disk utility 2) fix permissions using Batchmod 3) rebuilding the library.
First, any idea why these events are suddenly blank They weren't blank in prior rebuilds (I don't think)? Second, I can't seem to find a way to delete these empty events - any ideas?
Thanks in advance.

Do you get a message about MMe when you first open iPhoto? If so try the following:
Click on the More Info button and ignore the web page, go to iPhoto's Accounts preference pane and delete the MobileMe account. Next to go the System/MobileMe preference pane and log out of MMe. That will stop those messages.
If not make sure MMe is deleted from iPhoto's Accounts preference pane and log out of MMe in the System/MobileMe preference pane.
OT

Tab content is empty when tab is dragged

I have two TabPanes which can move tabs each other. This is the code of the TabPane which receives the dragged tabs from the user:
tabPane.setOnDragDropped(new EventHandler<DragEvent>()
            @Override
            public void handle(DragEvent event)
                final Dragboard dragboard = event.getDragboard();
                if (dragboard.hasString()
                        && TAB_DRAG_KEY.equals(dragboard.getString())
                        && DragBuffer.getDraggingTab().get() != null
                        && DragBuffer.getDraggingTab().get().getTabPane() != tabPane)
                    final Tab tab = DragBuffer.getDraggingTab().get();
                    tab.getTabPane().getTabs().remove(tab);
                    tabPane.getTabs().add(tab);
                    tabPane.getSelectionModel().select(tab);
                    event.setDropCompleted(true);
                    DragBuffer.getDraggingTab().set(null);
                    event.consume();
I noticed that when I drag the tab into the target TabPane the content of the tab is empty. But when I swith to the next tab of the target tabPane and return back I can see the content. This is couced by this line:
tab.getTabPane().getTabs().remove(tab);
Can you tell me how I can change the logic in order to prevent the empty tab body?
Ref javafx 2 - Tab content is empty when tab is dragged - Stack Overflow

This looks like a bug; I see the same thing in the context of your other thread. I can't seem to find a workaround. I have some sample code below which demonstrates the same problem without cluttering the code with drag and drop. This should move the selected tab in the bottom tapPane to the top tabPane ("Up" button) or the selected tab in the top tabPane to the bottom tabPane ("Down" button). When a tab is moved it is automatically selected; moving a tab to the top tabPane fails to show its content. (Strangely, moving a tab to the bottom tabPane works fine.) You should probably file a JIRA; reference this thread ("discussion" in the new forum-speak).
import java.util.Random;
import javafx.application.Application;
import javafx.beans.binding.Bindings;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.Label;
import javafx.scene.control.Tab;
import javafx.scene.control.TabPane;
import javafx.scene.layout.HBox;
import javafx.scene.layout.Pane;
import javafx.scene.layout.VBox;
import javafx.stage.Stage;
public class TabSelectionTest extends Application {
@Override
public void start(Stage primaryStage) {
final TabPane tabPane1 = new TabPane();
final Random rng = new Random();
final int NUM_TABS = 4 ;
for (int i=1; i<=NUM_TABS; i++) {
    tabPane1.getTabs().add(createTab(rng, i));
final TabPane tabPane2 = new TabPane();
    for (int i=1; i<=NUM_TABS; i++) {
      tabPane2.getTabs().add(createTab(rng, i+NUM_TABS));
final Button moveToPane1Button = new Button("Up");
final Button moveToPane2Button= new Button("Down");
final HBox buttons = new HBox(10);
buttons.getChildren().addAll(moveToPane1Button, moveToPane2Button);
moveToPane1Button.setOnAction(new EventHandler<ActionEvent>() {
      @Override
      public void handle(ActionEvent event) {
        Tab selectedTab = tabPane2.getSelectionModel().getSelectedItem();
        tabPane2.getTabs().remove(selectedTab);
        tabPane1.getTabs().add(selectedTab);
        tabPane1.getSelectionModel().select(selectedTab);
    moveToPane2Button.setOnAction(new EventHandler<ActionEvent>() {
      @Override
      public void handle(ActionEvent event) {
        Tab selectedTab = tabPane1.getSelectionModel().getSelectedItem();
        tabPane1.getTabs().remove(selectedTab);
        tabPane2.getTabs().add(selectedTab);
        tabPane2.getSelectionModel().select(selectedTab);
    moveToPane1Button.disableProperty().bind(Bindings.isEmpty(tabPane2.getTabs()));
    moveToPane2Button.disableProperty().bind(Bindings.isEmpty(tabPane1.getTabs()));
    VBox root = new VBox(10);
root.getChildren().addAll(tabPane1, buttons, tabPane2);
primaryStage.setScene(new Scene(root, 600, 500));
primaryStage.show();
private Tab createTab(Random rng, int i) {
    Tab tab = new Tab("Tab "+i);
    Pane pane = new Pane();
    pane.setMinSize(600, 400);
    String style = String.format("-fx-background-color: rgb(%d, %d, %d);", rng.nextInt(256), rng.nextInt(256), rng.nextInt(256));
    pane.setStyle(style);
    pane.getChildren().add(new Label("This is tab "+i));
    tab.setContent(pane);
    return tab ;
public static void main(String[] args) {
launch(args);

LS Centralized Logging Agent Event ID 33041

I am seeing the following error very frequently on all my Lync servers that are running the CLS agent:
LS Centralized Logging Agent Event ID 33041
Lync Server Centralized Logging Service Agent Service was unable to convert etl trace record(s) to cache record(s) due to missing message formats and lost these record(s) permanently
Cache file path: C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\Tracing\CLS_WPP_10-13-2014-17-21-13.cache
Missing message format(s): 1
d4626f10-6a45-af12-1218-c8e7bb881225(95)
Cause: Lync Server Centralized Logging Service Agent uses default.tmx file to convert ETL records to binary cache file records. If it can't find the message format information for a record it will be unable to determine the data types of the insert data for
the record and the insert data will be lost. This can happen if the default.tmx file is out of sync with respect to the code generating the .ETL records.
Resolution:
Verify that default.tmx file is current and update the default.tmx file if necessary. Check if there are any private bits installed causing default.tmx to be out of sync
It appears the errors started with the install of the August CU updating Lync to 5.0.8308.738. Note, this error is with CLS, not Lync Debugging tools. I have verified that ClsAgent.exe is using C:\Program Files\Common Files\Microsoft
Lync Server 2013\Tracing\default.tmx, which is 23041 KB and dated 8/3/2014.
Anyone else seeing this? Anyone have a fix?

I'm experiencing this issue also. I've updated to latest CU and fixed the agent not starting issue. Now the agents run, and I can see the cache files growing. But I get this blowing up the event log:
Lync Server Centralized Logging Service Agent Service was unable to convert etl trace record(s) to cache record(s)
due to missing message formats and lost these record(s) permanently
Cache file path: C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\Tracing\CLS_WPP_03-05-2015-16-00-53.cache
Missing message format(s): 2
68fdd900-4a3e-11d1-84f4-0000f80464e3(66)
68fdd900-4a3e-11d1-84f4-0000f80464e3(64)
Cause: Lync Server Centralized Logging Service Agent uses default.tmx file to convert ETL records to binary
cache file records. If it can't find the message format information for a record it will be unable to determine the data types of the insert data for the record and the insert data will be lost. This can happen if the default.tmx file is out of sync
with respect to the code generating the .ETL records.
Resolution:
Verify that default.tmx file is current and update the default.tmx file if necessary. Check if there are any
private bits installed causing default.tmx to be out of sync
Log files created with Search-CsCLSLogging -Output "myfile.log" produce this event and create an empty file.
I've tried copying the default.tmx from the Tracing folder to the Debbing folder, as suggested in other posts, but have the same results.
Interestingly, I can stop the agent service, and run the old OCSLogger Logging Tool program and can produce valid log files.
Any suggestions?

When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event. Now it shows only one photo at a time. How do I get it back? Can you help?

When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event. Now it shows only one photo at a time. How do I get it back? Can you help?

On the bottom bar of the window (on the left iPhoto 11, on the right in other versions) note the slider. Drag it left.
Regards
TD

SOs,AR Invoices,and Delivery Notes have empty "Logistics" Tab

Hi,
As the title says Sales Orders,AR Invoices,and Delivery Notes have empty "Logistics" tab "Ship To" and "Bill To" windows - the Ship to and Bill To addresses are filled in the BP Master Data but they do not populate the logistics tabs Ship To and Bill To windows in these documents?
Just to let you know that this is for only for new Business Partners as the old BPs seem to populate the logistics window automatically.
Any ideas ?
Thank you,
MB
Edited by: Matthew Brigley on Aug 13, 2010 11:53 AM

Hi Matthew,
The ST/BT address fields retain the information at the time the document was added. If there is no address then at the time the document was added, the address was set up.
You can update the fields after the document is added for some of them (the address field will be white; grey means you can't update the field) - click in the ST/BT drop-down. If there is no option available, check the BP's address(es) to make sure there is an address set up. If you do add an address, close the document and re-open; the address should be available.
If there is no address in the drop-down and there is an address on the BP record, check other transactions to see if it's BP-specific or all documents are not picking up the BP address info.
Heather

Delegated Object's event not appearing in the "start event" tab

Hi,
I have created a object type say Y00Mara( copy of BUS1001) ....then created a subtype from it ...called Ymara00.
then I created a deleegation ...if I test the supertype i can now see the new objects/attributes etc...
I also added one event "old_material_changed" in the subtype and changed the status on both the subtype and delegted obj to "implemented".
when i am trying to use this delegated obj in the "start event" tab of a WF ...the new event "old_material_changed" is not appearing...
what maay be thhe reason

HI,
Please maintain the delegation with the subtype ( Y00Mara) and supertype ( BUS1001 ) by using transaction SWE_SET_DELEGATION. Now run the above transaction.
Click on new entres.
Enter the follwoing values...
Object type : BUS1001
Person responsible : your sap user id
Delegation type : Y00Mara
Save it.
Now whenever you use BUS1001, all the custom mentod, events will be available there.
Thanks and regards,
SNJY

How to enable the Exchange 2010 Admin Audit logs in Event Viewer

How to enable the Exchange 2010 Admin Audit(Mailbox Auditing) logs in Event Viewer.
- Sivashankar. Please mark as answer/useful if my contribution is helpful

Hi Siva,
We could execute the command below to view Administrator Audit Logging settings:
Get-AdminAuditLogConfig
If it is not enabled, please run the command below:
Set-AdminAuditLogConfig -AdminAuditLogEnabled $True
In addition, here are some references for you to utilize this feature:
Configure Administrator Audit Logging :
http://technet.microsoft.com/en-us/library/dd335109(v=exchg.141).aspx
Search the Administrator Audit Log :
http://technet.microsoft.com/en-us/library/ff459262(v=exchg.141).aspx
Regards,
Rebecca Tu
TechNet Community Support

Where is the log in item tab? i cant find it !

where is the log in item tab?? i cant find it.cant install my itunes helper without going through it .urgent .need an answer as fat as possible .

As of CC 2014 the filter no longer exists. Several features were removed, some had to with flash as Adobe is supporting html5 over flash. It can still be used in CS6 and CC

By selecting the dropdown list a new empty browser tab is getting opened

Hi,
When i try to pass the parameters in Bi report, by selecting the dropdown list a popup(new empty browser tab) is getting opened why is this so. Can anyone help me to sort it out.
Edited by: user9093700 on Jul 6, 2012 8:57 AM
Edited by: user9093700 on Jul 9, 2012 8:46 AM

If you have tabs on top and no menu then the tabs are in a "Windows" area so there is no space to right. If you put tabs back to the bottom you will have most of your old behavior but because of the changes to tabs on top most of the tab context menu stuff all of the context menu part was lost except the customize toolbar stuff, double-clicking on an empty spot was restored, and eventually during the FF 4 beta most of the tab extensions Firefox messed up eventually worked again except in the area to the right of the tabs.
The Windows part of that double-click has to maximize or restore to normal,
and you have to be able to drag the window by it;'s title bar.
You can make Firefox 4.0.1 and '''Firefox 5.0''' look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]

JDev hangs after click on event-tab in MW

Hi all,
I have problem with definition an descriptor-event in MW in JDev 10.1.2:
When I define "tab" event on descriptor (none method selected yet), save and close JDev, after opening JDev and click on this "tab" event JDev hangs.
Only Ctrl+Alt+Del works.
Any idea?
Thanks.
Jara

I am having a similar problem using the mapping workbench inside JDev 10.1.2.18.38
In one of my pojo classes I extend DescriptorEventAdapter and implement the following method.
public void postUpdate(DescriptorEvent event) {
Rebuild, refresh, click on the event tab in the mapping workbench and it hangs. Have to Ctrl+Alt+Del.

Opening iPhoto 11- Event Tab defaults to "middle" of range.

This is a rather esoteric question about the Events tab that I hope I am capable of explaining.
When first starting iPhoto '11, then clicking the Events tab, the window opens with you somewhere in the middle of the entire events timeline instead of towards the bottom where your most recent events are. It was a UI preference I liked in earlier versions of iPhoto. You start iPhoto, click Events, and you're automatically at the "bottom" of the scroll; i.e. at your most recent events. I've not found a way for iPhoto '11 to default the Event opening window to the most recent events, its always somewhere in the "middle", which requires me to manually scroll down to the bottom.
Does anyone know how to fix this so my Events tab always opens near the most recent events?

If the Apple iPhoto development team are listening
They aren't. This forum is a space for Users to talk to other Users about technical issues. Apple don't promise to read anything here. It's all explained in the Terms of Use.
iPhoto menu -> Provide iPhoto Feedback is the route to the Developers.
Regards
TD

IPhoto has empty events

Hello,
iPhoto has 2 empty events, no images at all in them, can't delete them. What should I do?
David.

It wasn't as obvious as it sounds.. I had two empty events and had to look around some myself..

Deleting an empty event

In inadvertently created a new event (it is empty of any pictures) and want to delete it, but I cannot seem to do so. I did a search here, but the recommendation to drag it to the trash or hit the delete button did not work. Is there a way to delete it, or am I resigned to retitleing it and reusing it later when I'm ready to add a new event?

If that Event is empty it should simply go away itself. But it probably isn't actually empty because you can't create an empty Event. The Create Event option is only available when you have at least one photo selected. So, is there a Hidden photo in there?
Regards
TD

Smartform table with event tab

hi generally in tables there will be caluclations tab. iseen a diff table in standard form with a table and insted of caluclation its having a event tab. whats that whats the use. how to create?
thanks & regards
p kavi

Hi,
What u have seen is old table definition.
Now days if you try to create table in smartform u will not be able to create this type of table.
The tab EVENTS is for printing settings of header & footer.
If you check both header & footer boxes u will get both in table else only selected.
Also u can select when to print header / footer by checking boxes -
1. at start of table / at end of table -
by checking this box Header /footer will be printed at start / end of table resp.
2. at page break -
by checking this box header / footer will be displayed at each page when new page is triggered. If uncheck then header / fooeter will be displayed only at start / end of table and not on each page.
Hope this info will help you .
Regards

Firestarter logging - empty events tab

Similar Messages

Maybe you are looking for