Fireworks Navbar Not Previewing Correctly

Hi,
I am building a website locally and have created a navbar in Fireworks. When I import the fireworks html into Dreamweaver it displays fine, however when I preview the page in Explorer there is a small strip (probably 2 or 3px) running across the length of the top of the banner. When I preview in Firefox however the strip doesn't show up. Just wondering if anyone has had this problem, and if it is likely to show up when the page goes live?
Cheers!

Hi Linda - Thanks for taking the time to respond, unfortunately this was
not the problem.
Any other ideas?

Similar Messages

Folio does not preview correctly

We are new to digital publishing. We have been trying to view an article on an iPad in the content viewer and the horizontal preview is not correct.
The vertical preview is fine.
It is made up of three pages, the first page in the horizontal view is right but the next two pages are missing info/images.
We have tried adding the article multiple times and belive we have the folio set up correctly to accept the two orientations.
We have also gotten the following warning
Any help would be appreciated.

Firstly when you create a new folio in Folio Builder Panel, check the orientartion that you want. Default is set to Dual orientation, you may change it to horizontal or vertical.
If you are importing articles, take a look at this link for correct structuring of articles : http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60606c7754128c7a9c00e-7f ff.html

Newly placed images not showing up and Text Styles not previewing correctly

I was playing around with defining new text styles and they
looked OK in Dreamweaver but when previewed in browser everything
was in Times. I deleted all the pre-set styles trying to fix the
problem out why when I realized now newly placed images don't show
up in preview, but old images will. I can copy and paste an
existing image and it will show, but not if I place it new. When
trying to Manage Site, I kept getting a "Home page is not on
this...." message. Please help me figure out what I have
done!!!

>Home page is not on this...
Several possibilities spring to mind the first of which is
you haven't
defined your site properly or at all
>previewed in browser everything was in Times
a link to your stylesheet has an incorrect path
>realized now newly placed images don't show up in
preview,
they should, defined site again?
If you have a URL we could see the code?
If not can you post the code here, otherwise these are all
guesses
Jo
"chas0616" <[email protected]> wrote in
message
news:esa2uh$h4d$[email protected]..
>I was playing around with defining new text styles and
they looked OK in
> Dreamweaver but when previewed in browser everything was
in Times. I
> deleted
> all the pre-set styles trying to fix the problem out why
when I realized
> now
> newly placed images don't show up in preview, but old
images will. I can
> copy
> and paste an existing image and it will show, but not if
I place it new.
> When
> trying to Manage Site, I kept getting a "Home page is
not on this...."
> message.
> Please help me figure out what I have done!!!
>

Dreamweaver 8 does not preview correctly

Hello group,
When I try to preview my .html pages in Dreamweaver 8 it does
not know the page. The only thing that shows up is a page that
"Cannot be found" with a strange extension (TMPztriqmk5y3.htm).
This happened after I tried to design a page using ASP.Net.
Ever since then I get the strange extension that does not know the
page.
Any suggestions on how I can get the pages to show up again
in preview mode? Maybe something went wrong in the preferences?
Thank you for your help.

Are you using frames?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"David Powers" <[email protected]> wrote in message
news:f9hns3$soa$[email protected]..
> FlashRenaissance wrote:
>> When I try to preview my .html pages in Dreamweaver
8 it does not know
>> the page. The only thing that shows up is a page
that "Cannot be found"
>> with a strange extension (TMPztriqmk5y3.htm).
>
> See the TMP at the beginning? It stands for temporary.
>
>> Any suggestions on how I can get the pages to show
up again in preview
>> mode? Maybe something went wrong in the preferences?
>
> Go to Preferences, select Preview in Browser, and
deselect the option to
> preview using temporary files.
>
> --
> David Powers, Adobe Community Expert
> Author, "The Essential Guide to Dreamweaver CS3"
(friends of ED)
> Author, "PHP Solutions" (friends of ED)
>
http://foundationphp.com/

Fireworks 8 not exporting correctly - Help please!

I'm having a problem with files that were originaly created
in Fireworks 4 several years ago and have been updated in Fireworks
MX then MX2004. They are complicated disjointed rollovers which
involve twelve frames under one slice. When exporting to
Dreamweaver HTML it created that file with twelve frame images (as
in r10_c1.jpg, r10_c1_f2.jpg, r10_c1_f3.jpg, etc). All the other
images were just one file. As it should be. No problems for years
until now, with Fireworks 8, I get 12 frame images for every single
slice! A huge waste of my time going in and deleting literally
hundreds of unwanted files for every html page I generate for my
client's site. This is NOT the way Fireworks has always worked. I
consider this a major flaw and will not purchase the upgrade unless
it it fixed. I'm now spending hours trying to fix this **** mess!
WebDevDiva

Thanks Linda for responding to our issue. If you look at the
website I am referring to, you will see why I need to be able to
export the way I used to in all the previous versions of Fireworks
(back to 4 anyway).
http://www.artwaresjewelry.com/stewart.html
I don't generate entire html pages with Fireworks just the
main content area that I apply my page templates to in Dreamweaver.
This site has 20 "featured jewelry designers" and each of them has
12 items to a page.
When you click on a thumbnail image it creates two disjointed
rollovers. One changes the large image on the page to the large
image that corresponds to the thumbnail image that was clicked. The
other changes the image below that has the description and price of
the item. These each require 12 frames. Also on each designer page
as needed are two simple rollovers for previous and next. These
require two frames. The rest of the images only need one frame.
I much prefer to do one export rather than have to export
each slice seperately or even worse each frame seperately. I'm sure
that there is a better way to accomplish this today but this site
was originally built when Fireworks 4 and UltraDev were new.
Rebuilding it would be a major project that my client would not be
willing to fund at this point.
I still wish someone in software development would address
this issue and why the export behavior is not working the way it
used to. Maybe if they would post something on the emerging issues
for Fireworks 8 section...
Thanks,
Anna Stewart
A Stewart Design

Pdf not displayed correctly in preview

We have a new A) scanner (colortrac Ci40) and when we scan a pdf it is displayed in preview as if it is all wrinkled up.
Only in prewiew and if imorted in vectorworks. (on both OSX 10.5 and 10.6)
The same problem appears on a iPad.
It is not displayed correctly.
In all other programms I tried it is displayed properly.
We also have a small a4/a3 scanner from konica minolta and these scans display corectly in preview.
Is this only a preview problem and should I ignore it?

Hi there,
I have a very similar problem: a number of pdf files that I can see perfectly well in Safari/GoogleChrome do NOT show correctly in Preview or ANY iPad app I have (Notability, Adobe, PDF Expertm iAnnotate, Dropbox etc.).
The problem is that punctuation -- with the expection of periods or bolded text -- does not show properly. For example, commas and quotation marks to not show, and some numbers to not show.
Moreover, once I have annotated/viewed the problematic file on the IPad and resync to dropbox to view on Mac vis Adobe (which I do with most pdf files with no problems), I get an error message upon reopening the pdf file saying "Cannot extract the embedded font 'FAFWQV+--unknown-2--'. Some characters may not display or print correctly." (the 'quoted' text changes each time). When opening in Preview, no error message appears, though the fole is still lacking punctuation etc.
Here is a link to one problematic pdf:http://niis.cass.cn/upload/2012/12/d20121201200145301.pdf
NB: the file is in Mandarin, however I can successfully open/edit/annotate/sync other pdfs using Mandarin font so I'm not sure if the language is related to the problem.
I would be extremely grateful for some help with this please!
Thanks!

PDF's in Mail and Preview not displaying correctly

Ever since upgrading to Yosemite PDF's are not displaying correctly. Every time i generate a PDF of a sales quote it seems to lose a lot of information.
But the strange thing is.....
Preview and Mail both show PDF with missing text.
When I open using "Quick Look Attachment" within Mail or Adobe Acrobat it looks perfect.
When emailed, recipients (mostly Windows users) seem to have no problem opening it and seeing all text.
So far seen that issue is only in Preview and Mail
Only has happened since upgrading to Yosemite
PDF is created using web based ZOHO CRM to build quotes.
See image below to see the difference in what Mail and Preview sees compared with how other apps open the same PDF.
NOTE: sensitive info has been purposely blurred on image.

Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Yosemite
Safe Mode - About

My numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

my numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

Rebooted computer works now ok

Title & Menu Buttons not working correctly on remote control/ set top player but work in preview.

Title & Menu Buttons not working correctly on remote control/ set top player but work in encore preview. This only happens for a Blu ray project. When a user presses the menu button it should go to the previous menu they were on but it goes to the main menu. When they press the title button they should go to the main menu but it doesn't do anything. My DVD projects work as expected.I've tried creating a new "test" project with different footage and still get the same undesirable results.
Overrides grayed out and set to "not set" for timelines and menus.Project settings and build are set to blu ray. Also I've noticed when I preview a Bluray project the preview window shows a red colored disc next to the Title button when viewing the timelines and green when playing the menus but not so for a DVD project it displays red if motion menus and or timelines are not rendered/encoded. I'm not using motion menus and all the media is encoded according to the project specs.
I've searched this forum but couldn't find the answer. Any help or redirects to a solution would be appreciated. Working with CS5. Thanks.

I found out on my Samsung Blu ray player the remote has a tools button on it that brings up audio, angle, chapter selection etc.and also title selection which is actually the menus and the timelines unfortunately. It's not as easy or direct as last menu selected but it's a workaround at least. I also plan on using a pop up menu. I'll let you know.

I have manipulated a photo using layers etc and then flattened it and saved it under a new name. When I use 'Preview' (mac) to view the finished photo it doesn't look right. It's as the layers have not flattened correctly. When viewed in Elements 12 it

I have manipulated a photo using layers etc and then flattened it and saved it under a new name. When I use 'Preview' (mac) to view the finished photo it doesn't look right. It's as the layers have not flattened correctly. When viewed in Elements 12 it looks OK. The photo looks incorrect in other software such as photo books.
Looking at the same photo before flattening, what is being shown is only the top layer.
How do I correct this?

STEVEN1A wrote:
I have manipulated a photo using layers etc and then flattened it and saved it under a new name. When I use 'Preview' (mac) to view the finished photo it doesn't look right. It's as the layers have not flattened correctly. When viewed in Elements 12 it looks OK. The photo looks incorrect in other software such as photo books.
Looking at the same photo before flattening, what is being shown is only the top layer.
How do I correct this?
The top layer is indeed the one that is visible, unless there is/are area(s) of translucency on that layer, so that you can visualize a portion of the subjacent layer.
the finished photo it doesn't look right. It's as the layers have not flattened correctly.
Are your settings targeted to have the printer manage colors, or, to have PSE manage colors?

CS6 Ai not displaying the file preview correctly in the open dialogue window, any fixes?

Icon preview does not seem to scale correctly central to its column.
This also seems to happen on Cover flow view but you can not scroll across.

It's fine if you go through finder on desktop or via Photoshop but since updating Yosemite it's messed up Illustrator.
It's not scaling the preview correctly and it happens in Coverflow view too as I said.
Just wondering if there's a preference you can delete to reset the finder via Illustrator?

Iphoto preview not showing corrections with Yosemite

I created a new iPhoto file for 2015 and when I make adjustments to some of the photos with an outside editor (PhotoShop), the preview image does not show the corrections after making the changes. This has always worked before.
If I click to open the preview image after changes were made, the image shows with the corrections made but the menu under photos does not have the "revert to original" active and is grayed out, even though there have been changes. Yet, if I check the package contents of the 2015 iPhoto file to check the contents for the new pictures, the changed photos are shown under previews and the originals are shown in masters.
Since I got the iPhone, I had not used my digital camera since a June 2014 vacation. The preview corrections will always show if it is an iPhone picture but will not show the corrections if it is from my digital camera. If I export the camera photos with Image Capture to another folder not associated with iPhoto, then import the the pictures into iPhoto using the Import function, corrections will be saved and the preview will change to show the corrections (as previously). The picture also shows the revert to original option as available.
I had not used the camera since I upgraded to Yosemite so I went back to experiment in Mavericks which is on another drive and imported a test picture from the camera into iPhoto, made extreme changes to make it easier to see in the preview, and saved. The preview showed the corrections and iPhoto behaved as expected. I imported the same picture into Yosemite from the camera into iPhoto, made new radical changes and the preview did not change, no revert available, or the changes saved. Import in both instances was using the same picture on the same SDHC card in an external card reader.
These experiments seem to show that the problem is not my pictures or the card, but it a problem with iPhoto importing digital camera pictures under Yosemite. Since the iPhone imports directly and not through a reader, can it be that iPhoto under Yosemite has a problem communicating with the reader that does still work under Mavericks?
I know how to avoid the problem by this two step importing, although it will not break the photos into the auto-split of the events to individual days as would be if directly imported, but as one cluster of multiple day photos - a problem since I sort by date under View. The splitting by days is important for me. I do not want to sort trip pictures into individual days before importing as I might have as many as 1,000 photos in a single trip!
Is there a solution?

Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Screenshots are from PSE 10
Note 1: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
Note 2: editing a RAW file with either PSE or PS creates a new file which must be saved outside of iPhoto, i.e. the Desktop, and imported as a new photo into the iPhoto Library.

Fireworks slideshow: not able to see images thumbnails preview

Dear all,
I have successfully created 3 slides show with caption text and everything, out of the blue the slideshow in fireworks does not work the same way. I create my new album, then select the image and there is no preview on the lower right hand corner, it tells me that the file is not found (please see attached jpg image with a dash circle around it) and I cannot write anything to describe my images because I am not able to see the thumbnail, please help, thanks in advance

I cannot reprodue this problem in CS5.

Creative Cloud PDF preview not working correctly

More than 50% of the time, when we upload a PDF to our Creative Cloud the preview image is distorted to a square regardless of the actual proportions. The left and right arrows are also missing so you cannot preview multiple pages in a file. Sometimes it works but most the time it doesn't. Usually we have to upload again and then everything is fine.
Even though the upload doesn't preview correctly or allow you to preview multiple pages the PDF download is fine.

I am having the same problem, it's been like that for weeks. I've tried uploading an inDesign file and it only shows the first page, squeezed with funky font issues. I've tried different browsers with no luck.

Div header tag - not displaying correctly

I thought I had resolved an issue with a div header tag, but - as per a reply in my 'text as gif' thread, possibly not!
The header contains three images; a logo, a banner (text), and a picture of a castle. These should display in a line.
When I first set it up, I realised that the castle picture was normally ending up below the other two on smaller screens etc.
So I changed the dims for my div container from min 760px/max 1260px, to a set width (960px). I then rejigged the three images so the widths were within 960px, with some to spare for the spacing (total widths of the three are 900: hspacing another 20 pixels). There is no padding/borders defined. Therefore the total should be well within the 960 width (?).
It looks fine on my PC (widescreen); in 3 browsers, using the restore down menu command (ie to make it not full screen), and by using the Dreamweaver multiscreen preview (phone, tablet, smaller desktop). It wasn't ideal (as scrolling required), but at least meant the header (and the rest of the screen) displayed correctly, ie in a horizontal line (and then sidebar - content - sidebar).
If I set my container width much smaller, most of the screen will be green (the body) in big screens.
If I rejig the dimensions, it's all a bit hit and miss (and why don't the current dimensions work?).
Do I need to define the width of the header (as well as the container)?
Help! Thank you
http://hertfordcarnival.org.uk/dev/Index.html

Hi there, I started off using one big image, but it didn't look right with regards to size and placing (ie I wanted the logo on the left edge, the castle on the right edge, etc). When you say slice, what do you mean? One image in from fireworks, and then ... ? Thanks again
Date: Wed, 7 Dec 2011 01:37:10 -0700
From: [email protected]
To: [email protected]
Subject: Div header tag - not displaying correctly
    Re: Div header tag - not displaying correctly
    created by osgood_ in Dreamweaver - View the full discussion
Datafan55 wrote: I thought I had resolved an issue with a div header tag, but - as per a reply in my 'text as gif' thread, possibly not! Why not just use one big image then you wont have a problem of with the alignment. Certainly don't use 'vspace' and 'hspace' to position the images. If you want to use 3 seperate images start by setting them us as one complete image then slice it into 3 images. Then use the following css to position the images side by side. #header img If the total sum of the width of the images is the same or does not exceed 960px then the images should be in a nice row side by side. They will actually sit side by side without using 'float' but you'll get a small gap between them which will be added to the sum of the width which will exceed 960px causing the third image to drop onto the next line.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4068499#4068499
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4068499#4068499. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Fireworks Navbar Not Previewing Correctly

Similar Messages

Maybe you are looking for