First and Last Word on Page

Hi,
I am trying to create a document that is similar to a dictionary or an index of information.
I want the first and last word on each page to be displayed automatically at the top corner and bottom corner of each page, to make navigation in the document easier.
Is there a way to do this in InDesign?
(If it is not done automatically, then if there is any shift in the lines, everything will be off, so i would Iike to find a way to do this.)
Thanks

That can be done with text variables (only in CS3 and later, though).
Read http://help.adobe.com/en_US/InDesign/6.0/WS6A9BE096-77B2-4721-9736-797C4912B6C9a.html, the section called "Create variables for running headers and footers".

Similar Messages

How to print header in first and last page only in SAPSCRIPT

Hi!
How to print header in first and last page only in SAPSCRIPT,
in between pages, I need to print all line items in MAIN window only .
Thanks in anticipation!
Aki.

Hi All,
Thanks for your early update...but my requirement here is
I have two pages (FIRST , NEXT ) First is having Header, Main and Footer
NEXT is having Main and Footer ..I am printing PO here..let us think that my PO is having 20lines items , let us assume that it takes five pages...
Now how application is printing is ..first set of data is printing in FIRST page and remainiang data distributed to 4 pages printing in NEXT page ..but what my requirement is , I need fifth page print on FIRST page, instead of NEXT page... Ultimately I need last set of data always print in FIRST ie out of 5 pages 1st print on FIRST 2nd 3rd 4th print on NEXT and 5th print again on FIRST .
hope you this will clear you.
Thanks!

IDCS3 Print Booklet - Image across first and last page

Does anyone know how I could place an image to be wrapped around the cover of a booklet? No problem on inside pages because they show as two page spreads but the first and last pages don't display as a two page spread.

Place it on the cover and stretch it out across what would be the back
cover if it were there.
Copy to clipboard and scroll to the last page. Edit>copy in place. Crop
to fit on back cover and front cover.
Bob

Chunk expressions: Need the first and last char position from member.word[x]?

I need to build a linear list of the string positions of the
first and last character of each word in a string. For example if I
have the string myPet = “DOG CAT FISH” then myList =
[[1,3],[5,7],[9,12]]
myPet.word[x] will let me access the individual words but
I’m not sure how to get the char position of the beginning
and end of each. Please help, it’s Friday and my brain has
left for the weekend.

Touche, Sean.
"Sean Wilson" <[email protected]> wrote in
message
news:fqa8ap$bga$[email protected]..
> Hi Craig,
>
> Your's fails if any word is repeated. Try it with "DOG
CAT FISH DOG"
>
> This one seems to work, although there are probably more
efficient ways to
> go about it. A regular expression and the PRegEx xtra
would certainly be
> quicker, especially as the string gets longer
>
> on mGetWordBoundaries aString
> -- basic error check
> if stringP(aString) = 0 then return []
> if length(aString) = 0 then return []
>
> lWhitespace = [SPACE, TAB, RETURN, numToChar(10)]
> tStart = 1
> tChar = aString.char[tStart]
> repeat while lWhitespace.getPos(tChar)
> tStart = tStart + 1
> tChar = aString.char[tStart]
> end repeat
>
> lPositions = []
> repeat with w = 1 to aString.word.count
> tEnd = tStart + aString.word[w].char.count - 1
> lPositions.append([tStart, tEnd])
> tStart = tEnd + 1
> tChar = aString.char[tStart]
> repeat while lWhitespace.getPos(tChar)
> tStart = tStart + 1
> tChar = aString.char[tStart]
> end repeat
> end repeat
> return lPositions
> end

How do I easily select a group of emails in Apple Mail if I want to delete them? In other words, how do I select the first and last message and delete everything in between?

How do I easily select a group of emails in Apple Mail if I want to delete them? In other words, what do I select if I mark the first and last email to delete everything in between? Thanks.

I have this same issue. I have over 100 email addresses that I need to add to a group. The issue is not making the group, it's getting the email addresses from Mail to Contacts.
Dragging the email addresses does nothing. You can copy the addresses, but there's nowhere to put them. You can make a VCF for an email address, but then you have to find all of them to add them to the group. How do you automate this?!
I'm astounded that there's so little support for such a common issue for which people have been asking for years.

How can I display the first and last name using a paramater as employee ID?

Hi SAP,
I have a parameter that is called {? Employee ID}. What I want to do is display the first and last name based on the employee ID value entered in {? Employee ID} in the page header of the report. Right now, when I put the following formula in the page header only some pages get the right result while other pages dont....
if table.employeeid = {? Employee ID} then
table.firstname" "table.lastname
It appears as though if the first record in the details section on the beginning of each page happens to be the employee under {? Employee ID} then it prints it correctly, if it isn't I get a null value in the page header.
Anyone have any ideas?
Z

Hi Try this,
Whileprintingrecords;
if ={?EmpID} then
Also check the option "Default values for null" in the formula editor.
Regards,
Vinay

How to show the First and Last name of the user instead of user name

Gurus,
We have the full email id of the user as the portal user name. Right now we are using the "Item Attributes - Current User" to show the user name. We don't want to show this anymore. We would like to show the First and Last name of the user on the Portal page. How can i do this. Please post a reply if you have some idea about it.
Thanks
Raj
---------

I believe this is possible using the security APIs. See http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/PLSQL/DOC/PLDOC_9026/INDEX.HTML and look for person_info (Returns user information, given a user name)
under wwsec_api
Suggest posting any follow-up questions to the Security forum - http://forums.oracle.com/forums/forum.jsp?forum=6

How do I bulk edit contact's nicknames to first and last names?

i imported contacts to the contacts app and they all say "NoName".
i click on one of them and the first and last name fields are empty but the nickname field has the first and last name in it.
how can i bulk edit 1120 contacts to change the full nickname to a first and last name?
ex: "First" ~ "Last" ~ "Nickname"
       "Blank" ~ "Blank" ~ "John Smith"
i want to to be:
       "John" ~ "Smith"
help me create an applescript or use a program or something cuz its killing me....thanks
ohh and i used both of the following applescripts and nothing happened:
tell application "Address Book"
   set all_Persons to every person in group "Test"
   repeat with per_son in all_Persons
       set nknm to per_son's nickname
       set per_son's first name to word 1 of nknm
       set per_son's last name to word -1 of nknm
   end repeat
end tell
ANDDDDDD
tell application "Address Book"
   set {ASTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, space}
   repeat with onePerson in (get people whose nickname is not missing value)
       set N to text items of (get nickname of onePerson)
       tell contents of onePerson
           set first name to text items 1 thru -2 of N as text
           set last name to text item -1 of N as text
       end tell
   end repeat
   set AppleScript's text item delimiters to ASTID
end tell
neither did anything...

to any1 that wants to use the scripts and have them work just type "save" on the next like after end tell and itll do it........

How to split 'Firstname Lastname' into 2 columns 'First' and 'Last'?

I import a .csv file from PayPal that throws the customer's First name, MI and Last Name all in one column. I have no problem going through and deleting the middle initial to make just two words separated with a space.
How can I split the First and Last names that are separated by a space into two separate columns? It's a piece of cake in Excel, but for some stupid reason, I can't use Excel 08 for Mac to do it. Keeps saying that there is data in column #XX without a heading (there is no data there) when I try to import to PayPal Multi-order shipping.
Please help! I'm desperate. Taking me for ever to cut and past each last name into the new column.
Thanks for any help with this!
Marcus

Here is a script which does the trick.
--[SCRIPT splitfirst_lastname]
Enregistrer le script en tant que Script ou Application : splitfirst_lastname.xxx
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner la colonne de chaînes à découper (et éventuellement davantage pour définir la colonne recevant les noms propres).
Aller au menu Scripts , choisir Numbers puis choisir splitfirst_lastname
Le script découpe les chaînes sources au premier espace.
Le prénom remplace la chaîne initiale.
Le reste est déposé dans la cellule adjacente à droite ou dans la cellule de la denière colonne sélectionnée.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
Sous 10.6.x,
aller dans le panneau "Général" du dialogue Préférences de l'Éditeur Applescript
puis cocher la case "Afficher le menu des scripts dans la barre des menus".
--=====
Save the script as a Script or an Application : splitfirst_lastname.xxx
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a column of strings to split (and maybe more columns to define the column receiving lastNames).
Go to the Scripts Menu, choose Numbers, then choose "splitfirst_lastname"
The script split the source strings on the first embedded space.
The FirstName replace the original string.
The reminder is stored in the cell adjacent on the right (or in the last column of the selected range.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/02/23
--=====
on run
run script doyourduty
end run
--=====
script doyourduty
set {dName, sName, tName, rname, rowNum1, colNum1, rowNum2, colNum2} to my getSelParams()
if colNum2 = colNum1 then set colNum2 to colNum1 + 1
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
repeat with r from rowNum1 to rowNum2
tell row r
set first_last to value of cell colNum1
if (first_last is not 0.0) and first_last contains space then
set in_pieces to my decoupe(first_last, space)
set value of cell colNum1 to item 1 of in_pieces
set value of cell colNum2 to my recolle(items 2 thru -1 of in_pieces, space)
end if
end tell -- row
end repeat
end tell -- Numbers
end script
--=====
set {rowNum1, colNum1, rowNum2, colNum2} to my getCellsAddresses(dname,s_name,t_name,arange)
on getCellsAddresses(d_Name, s_Name, t_Name, r_Name)
local two_Names, row_Num1, col_Num1, row_Num2, col_Num2
tell application "Numbers"
set d_Name to name of document d_Name (* useful if we passed a number *)
tell document d_Name
set s_Name to name of sheet s_Name (* useful if we passed a number *)
tell sheet s_Name
set t_Name to name of table t_Name (* useful if we passed a number *)
end tell -- sheet
end tell -- document
end tell -- Numbers
if r_Name contains ":" then
set two_Names to my decoupe(r_Name, ":")
set {row_Num1, col_Num1} to my decipher(d_Name, s_Name, t_Name, item 1 of two_Names)
if item 2 of two_Names = item 1 of two_Names then
set {row_Num2, col_Num2} to {row_Num1, col_Num1}
else
set {row_Num2, col_Num2} to my decipher(d_Name, s_Name, t_Name, item 2 of two_Names)
end if
else
set {row_Num1, col_Num1} to my decipher(d_Name, s_Name, t_Name, r_Name)
set {row_Num2, col_Num2} to {row_Num1, col_Num1}
end if -- r_Name contains…
return {row_Num1, col_Num1, row_Num2, col_Num2}
end getCellsAddresses
--=====
set { dName, sName, tName, rname, rowNum1, colNum1, rowNum2, colNum2} to my getSelParams()
on getSelParams()
local r_Name, t_Name, s_Name, d_Name
set {d_Name, s_Name, t_Name, r_Name} to my getSelection()
if r_Name is missing value then
if my parleAnglais() then
error "No selected cells"
else
error "Il n'y a pas de cellule sélectionnée !"
end if
end if
return {d_Name, s_Name, t_Name, r_Name} & my getCellsAddresses(d_Name, s_Name, t_Name, r_Name)
end getSelParams
--=====
set {rowNumber, columnNumber} to my decipher(docName,sheetName,tableName,cellRef)
apply to named row or named column !
on decipher(d, s, t, n)
tell application "Numbers" to tell document d to tell sheet s to tell table t to ¬
return {address of row of cell n, address of column of cell n}
end decipher
--=====
set { d_Name, s_Name, t_Name, r_Name} to my getSelection()
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
tell application "Numbers" to tell document 1
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
try
(selection range of table y) as text
on error errMsg number errNum
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
return {theDoc, theSheet, theTable, theRange}
end try
end repeat -- y
end if -- x>0
end tell -- sheet
end repeat -- i
end tell -- document
return {missing value, missing value, missing value, missing value}
end getSelection
--=====
on parleAnglais()
local z
try
tell application "Numbers" to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
on decoupe(t, d)
local oTIDs, l
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to oTIDs
return l
end decoupe
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
--[/SCRIPT]
Yvan KOENIG (VALLAURIS, France) mercredi 23 février 2011 10:18:36

How to compare the first and last characters of strings?

lets say we have a name column with values;
c1
Antu Anamentu
Steven Smith
Since A=A and U=U for the first value we need a TRUE and FALSE for the second value SQL. Is this possible to do with REGEXP functions on 10gR2.
Thank you.

Hi Frank,
Just minor correction: REGEXP_LIKE (Name1, '^(.).*(.) \1.*\2$') ;
Explanation: ^(.) =>^ specifies the next char is first char
                            . dot specifies single character
                           () defines group which can be backrferenced
                   .* => Any number of characters as we want only first and last character
                  (.) => (.)space The space signifies that we want to remember last char of first word or char before space
                   \1 => It recalls first group which we saved for backreference using (.)
                   .* => Any number of chars
                  \2 => It recalls first group which we saved for backreference using (.)
                   $ => It specifies the char before this is last charHope it clarifies :)
SQL> WITH t AS
SELECT 'Antu Anamentu' Name1 FROM DUAL UNION ALL
SELECT 'Steven Smith' Name1 FROM DUAL
SELECT Name1
FROM t
WHERE REGEXP_LIKE (Name1, '^(.).*(.) \1.*\2$') ;
NAME1
Antu Anamentu

Can only see first and last frame of clip in the timeline HELP PLEASE

Hi, my first time and I did look for an answer, but can't find one. I have premiere elements 4 and I am trying out ver. 9. In ver. 4 the clips in the timelin shows all the frames, but in ver. 9 it only shows the first and last frame of the clips. Is there any way to make all the frames show. By "all the frames", I mean the clips fill with frames.I liked to see all the frames in the timeline, it is easier for me to select and trim the bits out.
My specs are Core 2 Duo 6750, Nvidia 8600GTS, 4G Ram, Vista Home Premium. 3 HDD 3TB.
Thank you for answering
Werner

As for the GUI, PrE had one more like PrPro (the early versions), up through PrE 3. With PrE 4, they streamlined the GUI (and some of the operation), and went with the "dark look." PrPro went in that direction starting with CS3, and now, the two programs' GUI looks more alike - darker. Personally, I like PrPro 2.0's brighter GUI. Now, one can alter the brightness, but the contrast can work against doing much of that - give me the lighter GUI....
The look of PrE 4 thru PrE 9 is very similar, though things have moved about some. Still the look is similar. Same for PrPro CS 3 through CS 5.5.
As for the trial, things have changed in PrPro, as of CS 5.5. Once, the PrPro trial was very crippled, but had no watermark. No more. No crippling, and still no watermark. The trial for PrE is far less crippled, but does have the watermark. We do not know what changes might be coming with the trial of PrE10. We will just have to wait and see. One great option that Adobe offers is the 30-day, money-back guarantee. If you buy Premiere (either flavor), and use it for 29 days, but do not like it, then you return it for your money back. This is the full-paid version (both flavors) with nothing crippled, and no watermark. Not that many companies make such an offer. Basically, on can use the trial for 30 days, to see some of the powers of the program, and then buy it, and try it fully for another 29 days. If not completely satisfied, they get their money back - essentially a 59 day trial.
Were I doing AVCHD, I would definitely look at buying PrE 9, and giving it a 29 day shakedown. The only caveat is that AVCHD requires a lot of computer "horsepower," and not all computers (especially if more than a year, or so old) are up to that task. I find it amazing that a consumer format, like AVCHD, requires more computer power to process, than most professional formats, until one gets up to, say RED 2K/4K. However, that is the nature of the H.264 CODEC, and by that, I mean all H.264, not just the AVCHD version.
Good luck and happy editing,
Hunt

How to find first and last day of last month?.

Hello,
I am using Crystal Report XI.
Reports will be generated on first of every month for
previous month. I want to find start and end date of previous month
dynamic.
For august, Start date is July 1st and End date July 31st.
For September, start date is Aug 1st and Aug 31st.
How can i get first of previous month as start date and last
day of the previous month as end date?.
Same kind of thing I want to do for future report ..find next
month start date and end date.
Thanks

Adomacro,
you could do a function, like this
<cffunction name="getReportdates" returntype="struct"
hint="Given an arbitrary month and year, the function returns a
structure containing the first and last day of the previous
month">

<cfargument name="mnth" type="string" required="No"
default="#monthAsString(month(now()))#">
<cfargument name="yr" type="numeric" required="No"
default="#year(now())#">
<cfset firstDayOfGivenMonth = parseDateTime("1 " &
arguments.mnth & " #arguments.yr#")>
<cfset lastDayOfPreviousMonth =
dateAdd("d",-1,firstDayOfGivenMonth)>
<cfset numberOfDaysOfPreviousMonth =
daysInMonth(lastDayOfPreviousMonth)>
<cfset firstDayOfPreviousMonth =
dateAdd("d",-#numberOfDaysOfPreviousMonth#,firstDayOfGivenMonth)>
<cfset reportDates = structNew()>
<cfset reportDates.firstDayOfPreviousMonth =
firstDayOfPreviousMonth>
<cfset reportDates.lastDayOfPreviousMonth =
lastDayOfPreviousMonth>
<cfreturn reportDates>
</cffunction>


Given month: March
2004 
begin date:
<cfoutput>#dateFormat(getReportdates('March',2004).firstDayOfPreviousMonth,"d
mmm yyyy")#</cfoutput> 
end date:
<cfoutput>#dateFormat(getReportdates('March',2004).lastDayOfPreviousMonth,"d
mmm yyyy")#</cfoutput> 


Given month: August
2007 
begin date:
<cfoutput>#dateFormat(getReportdates('August',2007).firstDayOfPreviousMonth,"d
mmm yyyy")#</cfoutput> 
end date:
<cfoutput>#dateFormat(getReportdates('August',2007).lastDayOfPreviousMonth,"d
mmm yyyy")#</cfoutput>

Get First and last day of Month..

Hi Friends,
I am trying to fetch First and Last day of a month and would like to implement that in the following code:
SELECT COALESCE(Date_A, Date_B, Date_C)
FROM dual
Here Date A and B are in Format of MM DD YYYY (March 14, 2008)
and Date C is like MM YYYY (March 2008)
How can I get the Date_C as March 1, 2008 OR March 31, 2008 format if Date A and B are NULL ?
Thanks!
Edited by: user11095386 on Apr 23, 2009 10:45 AM

Hi,
In my earlier message, I thought that you were starting with strings like '03 12 2009' and that you wanted to display them as 'March 12 2009'. If what you have is just the reverse, then just reverse the format strings in my first message. Add a comma, if you want one, in the appropriate format string.
I believe this is what you want:
COALESCE ( TO_CHAR ( TO_DATE ( Date_A, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( TO_DATE ( Date_B, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( TO_DATE ( Date_C, 'fmMonth YYYY'),    'MM DD YYYY')
         )Notice how, on the 3rd line, TO_DATE is called without DD in the format string:
TO_DATE ( Date_C, 'fmMonth YYYY')When you do this, the day defaults to the 1st of the month, so this is all you have to do to convert the VARCHAR2 'March 2009' to the DATE 01-Mar-2009.
If you want the last day of the month, not the first, when Date_C is chosen, then use LAST_DAY:
COALESCE ( TO_CHAR ( TO_DATE ( Date_A, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( TO_DATE ( Date_B, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( LAST_DAY ( TO_DATE ( Date_C
                                          , 'fmMonth YYYY'
             , 'MM DD YYYY'
         )

Getting first and last day of week

Dear all .
Is there any funcion module which gives first and last day of the current week .
Eg . todays day is 15.11.2006
start date of week : 13.11.2006
end date of week : 19.11.2006
in the same way I want how many days are there in month .
Eg : for Nov month :
         30 days .
      for dec month 31 days .
Thank you in advance

Use FM GET_WEEK_INFO_BASED_ON_DATE
Import parameters               Value
DATE                            15.11.2006
                                                                                Export parameters               Value
WEEK                            200646
MONDAY                          13.11.2006
SUNDAY                          19.11.2006
Use FM HR_E_NUM_OF_DAYS_OF_MONTH
Import parameters               Value
P_FECHA                         15.11.2006
Export parameters               Value
NUMBER_OF_DAYS                    30
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

Select first and last records in grouped results - Oracle 11g

Say I have the following information in an Oracle 11g table:
Qty
Production order
Date and time
20
00000000000000001
12-JAN-14 00:02
20
00000000000000001
12-JAN-14 00:05
20
00000000000000001
12-JAN-14 00:07
20
00000000000000001
13-JAN-14 00:09
30
00000000000000002
12-JAN-14 00:11
30
00000000000000002
12-JAN-14 00:15
30
00000000000000002
12-JAN-14 00:20
30
00000000000000002
14-JAN-14 00:29
I would like to write a query that would return the following:
Qty
Production order
First
Last
80
00000000000000001
12-JAN-14 00:02
13-JAN-14 00:09
120
00000000000000002
12-JAN-14 00:11
14-JAN-14 00:29
That is, the sum of the Qty column grouped by Production order, and the date/time of the first and last records for each Production order.
I came up with a query that yielded this result:
Qty
Production order
First
Last
80
00000000000000001
12-JAN-14 00:02
14-JAN-14 00:29
120
00000000000000002
12-JAN-14 00:02
14-JAN-14 00:29
Which means that the First and Last columns show the overall first and last date / time of the whole table. Please note that this is a dummy table. Sorry I am now allowed to write the actual query
I came up with since work policies do not allow me to share it. Also, I tried with windowing functions such as rank()and row_number() but my user does not have enough privileges to do so.
Any help or hints will be greatly appreciated.

Due to the fact that Oracle does not record the rows in any particular order, it would be wrong that the "first date" would be the first row processed by the query.
Therefore you would have to supply some other column if you do not want to consider the table as ordered by date.
Also, any analytical functions will need you to supply the "order by" and if its the date, then just a simple query will do:
SQL>WITH Tab1 (Qty, Production_Order, Pdate)
2       AS (SELECT 20, '00000000000000001', TO_DATE ( '12-JAN-14 00:02', 'DD-MON-YY HH24:MI') FROM DUAL UNION ALL
3           SELECT 20, '00000000000000001', TO_DATE ( '12-JAN-14 00:05', 'DD-MON-YY HH24:MI') FROM DUAL UNION ALL
4           SELECT 20, '00000000000000001', TO_DATE ( '12-JAN-14 00:07', 'DD-MON-YY HH24:MI') FROM DUAL UNION ALL
5           SELECT 20, '00000000000000001', TO_DATE ( '13-JAN-14 00:09', 'DD-MON-YY HH24:MI') FROM DUAL UNION ALL
6           SELECT 30, '00000000000000002', TO_DATE ( '12-JAN-14 00:11', 'DD-MON-YY HH24:MI') FROM DUAL UNION ALL
7           SELECT 30, '00000000000000002', TO_DATE ( '12-JAN-14 00:15', 'DD-MON-YY HH24:MI') FROM DUAL UNION ALL
8           SELECT 30, '00000000000000002', TO_DATE ( '12-JAN-14 00:20', 'DD-MON-YY HH24:MI') FROM DUAL UNION ALL
9           SELECT 30, '00000000000000002', TO_DATE ( '14-JAN-14 00:29', 'DD-MON-YY HH24:MI') FROM DUAL)
10 SELECT   SUM ( Qty), Production_Order, MIN ( Pdate), MAX ( Pdate)
11      FROM Tab1
12 GROUP BY Production_Order
13* ORDER BY Production_Order
SQL> /
SUM(QTY) PRODUCTION_ORDER     MIN(PDATE)                    MAX(PDATE)
        80 00000000000000001    12-Jan-2014 00:02:00          13-Jan-2014 00:09:00
       120 00000000000000002    12-Jan-2014 00:11:00          14-Jan-2014 00:29:00

First and Last Word on Page

Similar Messages

Maybe you are looking for