First time client opens java needs admin rights to download, any way to push java runtime from ARD and open so they don't have to have admin credentials?
Hey guys,
I am the IT admin for Macs in our company. When we put a brand new image on a client machine, it works perfectly. I can install and run packages using ARD. For Java however, when a client opens something required by java it says it needs to download the java runtime etc etc... It requires admin rights to download and install. My Users do not have admin privileges to install things.
Does Apple have the packages they install the javaruntime with on the internet to download as a .pkg or something similar? I was not able to find one that I could use and push through Apple Remote Desktop. Any suggestions?
Basically I need a way to have javaruntime on a machine without me needing to log into each computer individually to download it or needing to give admin rights to the users.
Thanks!
Nevermind; I found a standalone installed located at:
http://support.apple.com/kb/DL1421
I install this through ARD before running any update features or anything so the end-user will not have to type in admin credentials since I can do this from my side of things now.
Similar Messages
-
When I click on a web page link, it creates a bookmark does not open page, need to right click and open new page or tab
My own problem not a system one
-
When I try to open a gradebook program called powerschool, I get a message that Java is not deteced, but my computer indicates that it has Java. I can't download any version of Java because I get a message that Apple has its own version of java. My computer indicates that no new software updates are needed.
Start here: http://support.apple.com/downloads/#java
-
Hi there, I updated to ML about 3 weeks ago I can not get in to my pps to download it again as when it was installing the first time I decided to skip the part where it said do i want to do the iTunes and iCloud thing. any suggentions how to go back and change that part or do I have to download it again.
Thanks
GeeRicTo set up iCloud, open System Preferences > iCloud, and follow its steps to use iCloud
-
I have downloaded ADE 3 on my macbook. It did recognize my Aluratek Libre the first time I used it but now it does not. I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre. Help pls
If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141 -
Why, when right click on some link the options "OpenLink in New Tab" and "Open Link in New Window" are exchanged?
Dear friend, the problem is that there is exchange of something very useful from users an this break them habits! I'm not interested of forced using of tools! Of course it's good that there is a tool to solve my problem, but this action make me unhappy.
last words - this is the way of losing users. -
am first time mac book user, could someone assist me in deleting the junks in my cache, cookie etc., and how useful the mac keeper software is?
AshwathRaj wrote:
am first time mac book user,
In General 3rd Party AV Software and Cleaning Utilities tend to cause More Issues than they claim to fix...
They are Not Required...
Mac OS X tends to look after itself.
See > http://www.apple.com/osx/what-is/security.html
More Info Here > https://discussions.apple.com/thread/4545776?tstart=0
The Safe Mac > http://www.thesafemac.com/mmg/
AshwathRaj wrote:
... and how useful the mac keeper software is?
See Here > Beware MacKeeper -
I really want to update my iMovie, but I guess I need to update a lot of things first, which costs a lot of money. Is there any way I can just update iMovie and nothing else?
- If you have a 1G ipod you can't update past 3.1.3. To identify yourd see:
Identifying iPod models
- Be aware that if you can/do update the iOS to the latest (4.2.1 for a 2G and 4.3.4 for a 3G) you may not be able to sync to the old computer since that computer will need the latest iTunes to see/sync with the update iPod. Yo need an Max with at least OSX 10.5.8.
You can transfer iTunes purchases from the iPod to the computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
You can use on of the third-party programs dicussed here to transfer other stuff:
new PC: Apple Support Communities
Unless you can move/copy the iPod backup file to the new computer you will loose all app data and restore from that backup. That file is located:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\ -
Time Machine locked all my song files...any way to "mass unlock"?
Awhile back I installed a wonderfully speedy SSD in my mid-2009 MBP. I used Time Machine to "restore" my stuff. I thought it odd that after that, song files would come up as "locked"...after awhile I realized that EVERY song file in the iTunes Library was now "locked". The FOLDERS are NOT locked, but all the mp3 files within each folder ARE locked.
I know, of course, that "command-i" and uncheck the locked box works on each individual file, but how do I do this on the entire library? Is that even possible? The tedium of opening every single folder and unlocking every file individually would be insane. Is there any way to select the iTunes Music folder and have all the files in all subfolders "unlocked" at once?Thanks, I tried that and it didn't work. The song files themselves were still locked. However, a friend emailed me with a solution that seems to have done the trick. It involved going through Finder and doing a search for "Music" files, selecting all, and then doing "get info". That showed a "dash" in the "locked" checkbox. First check it, wait until it has processed, then uncheck it, and that did it.
Also, I see posts talking about "turning off autolocking" in Time Machine, but I have never ever seen that as an option in the Time Machine prefs pane of the System Prefs in Mtn. Lion. Is that within "Time Machine" itself, and only available when it is active? -
Hi, I have recently updated my OS X to Maverick. when I did, my mail programme (Mail) will not open - for me only. There are 4 other users of the iMac, and they don't appear to have any problems.
First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive. -
Any way to get Java Plug-In-like handling of jar versions?
I have jars intended for use with the Java Plug-In with version #'s in properties files (computed by the various tooling for updating these on the server). The jars themselves have no notion of jar #.
I would like to re-use these jars and version #'s with Java Web Start to avoid conditional GETs, but without jar diffing in this case (as I already have many small jars due to lack of jar diffing in the Java Plug-In).
Is there any way I can get Java Web Start to act like the Java Plug-In in this regard (i.e. the jar version # is a statement from the server, the client does a normal GET against the jar URL if its own version is not that stated by the server)?
[Don't get me wrong, jardiffing is cool, but having to do everything differently between Java Web Start and the Java Plug-In is [b]not cool.Best way IMO would be to create a Socket connection to it so that you could connect with a client app and feed in data that way
-
i have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?) I NEED HELP BADLY PLEASE....
What version of the Mac OS X are you running. Go to the Apple in the upper left corner and select About This Mac and post the version.
-
My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!
I think many of us need a Defense Against the Podcasts App professor.
Have you looked at this Apple support page?
http://support.apple.com/kb/HT6190?viewlocale=en_US&locale=en_US -
is there any way i can reset my i pod or open it with it being disabled and i dont have password, is there any way i can reset my i pod or open it with it being disabled and i dont have password?
You will need to restore your iPod from the same computer that you most recently synced to.
Read this: http://support.apple.com/kb/ht1212
If you can't sync then you will need to try recovery mode.
Read this: http://support.apple.com/kb/ht4097 -
I bought a iphone 4 on online . But the guy forgot the his apple id pasword and i cant restore the iphone cuz i need the password is their any way i can restore the iphone . ??
iOS 7 has an antitheft feature. A stolen phone can NEVER be used again, except by the original owner or with the authorization of the original owner. If you bought a stolen phone that was your mistake; get your money back. While it's possible that the seller "forgot" their password, that is an easily corrected problem. In most countries knowingly possessing stolen property is a crime. Even if you don't know it is stolen, it can be taken from you and returned to the rightful owner.
If it really wasn't stolen, and it was an honest mistake on the part of the seller, the seller can easily correct the mistake and authorize your activation of the phone.
Maybe you are looking for
-
How to call a Shell Script from Report 6i
Hi All, Can anybody tell, how to call a Shell Script from Report 6i. Thanks in Advance, Bala
-
Request in Production server for Master data
Hi, In Production server when we try to hire an employee through PA40, it is giving an error saying that "Client XXX has status 'not modifiable", Choose 'Display object' or 'Cancel'. I think it is asking for a request, because of settings in SCC4,is
-
Help Requested - Creating Solaris 10 x64 Virtual Machine on an ESX Server
Hi All, I have been trying to create a Solaris 10 64 bit Virtual Machine on ESX and VMWare server Virtualization Platform. One of the forum entries said - The installer doesn't really care. At every boot, the processor type will be determined and a 3
-
CPUA Fail light comes on then mac freezes. Can still boot and use for a few minutes.
I have a first gen Mac Pro (2006) which has been working fine until a week or two ago. I have this computer set up with boot camp to run both OSX and Windows. I can boot into either os and run for between 2 and 5 minutes before the computer locks up
-
How to deploy the goldengate on EBS R12
EBS : R12.1.1 ORACLE DATABASE : 11.1.0.7 OS version : AIX 6.1 The source environment and the standby enviroment are the same. I want to know how to deploy the goldengate on EBS R12 , not for reporting , only just for Disaster recovery . I have read 1