Request in Production server for Master data

Hi,
In Production server when we try to hire an employee through PA40, it is giving an error saying that "Client XXX has status 'not modifiable", Choose 'Display object' or 'Cancel'.
I think it is asking for a request, because of settings in SCC4,is not modifiable. Since it is PRD server the standard SAP suggests to have the setting as above hence we cant change the settings also.
What could be the solution for this?
Regards
Prasad

Hi Prasad,
It doesnt make any differnce, just click on display object , it will save th data in the respective tables.....
Regards,
Sushil Soni

Similar Messages

Upload Image for Master Data Product - SAP CRM GUI

Hi,
I see in DEMOS image for master data product TX COMMPR01, when you open transaction image is in top of the screen with the other data.
I create a new product and add an image in Tab Document, however image only is load when I pushed botton preview.
Some idea?
Regards,

Hi Wilbert,
Well it should work if you have loaded the image at the right place in the Tab Document. Please verify the same.
What I did to check this :-
Go to Tab Document -> follow the tree structure Document -> Picture -> Full Size.
The Right click on Full Size ->create -> Document -> Import. And I imported a picture form my desktop. I did the same for Thumbnail. I can see the image in the top right corner of the screen in TX COMMPR01.
Also In order to view the complete picture I just Right click on the file name -> Document -> Display and I can see the full picture.
Reward points if it helps!!
Best regards,
Vikash.

About delta loading for master data attribute

Hi all,
We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
2. Could you please let me know the detailed procedures to perform this delta loading again ?
Thanks a lot

Hi...
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
3) then Delta.......
2. Could you please let me know the detailed procedures to perform this delta loading again ?
1) Make the QM status red.........to set back the init pointer.......
2) Repeat the load.....
After that.........if again load failed with Update mode R.....
1) delete the init flag.......
2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
3) then Delta.......
Regards,
Debjani.....

Creation of OLAP Variable for Master data

Dear BW Experts,
How to Create OLAP Variable for Master data in SAP BW? What is the use of OLAP Variable?

The entry column Type (Variable) on the Select Data tabpage indicates a variable time frame in which the data should be requested. The variables are not replaced by concrete values until a request is made. There are eight options:
Variable Data request Description
0
 Yesterday
 (12am 12am)
1
 Last week
 (Monday-Sunday)
2
 Last month
 (1. (First day - last day of previous month)
3
 Last quarter
 (1. (First day - last day of previous quarter)
4
 Last year
 (01. (January 1 Dec 31 of previous year)
5
 User time selection
 See below
6
 ABAP routines
 See below
7
 OLAP variables
 See below
Time selections with the help of the variables 0 to 4.
The variables 0-4 only refer to date fields of the data type DATS.
User time selection
Type 5 gives you a free selection of all fields.
If you select this variable for a field, confirm the selection, and then choose Detail for Type, an additional dialog box appears. In this dialog box you can freely limit the values of the fields and determine the next period value and the number of periods until a repetition.
Variables are placeholders for values and are not replaced by concrete values until a data request is made. You can also use a Variable for selections when requesting data for an InfoObject, if you choose type 7, confirm the selection, and then choose Detail for Type.

Error handling for master data with direct update

Hi guys,
For master data with flexible update, error handling can be defined in InfoPackege, and if the load is performed via PSA there are several options - clear so far. But what about direct update...
But my specific question is: If an erroneous record (e.g invalid characters) occur in a master data load using direct update, this will set the request to red. But what does this mean in terms of what happens to the other records of the request (which are correct) are they written to the master data tables, so that they can be present once the masterdata is activated, or are nothing written to masterdata tables if a single record is erroneous???
Many thanks,
/ Christian

Hi Christian -
Difference between flexible upload & Direct upload is that direct upload does not have Update Rules, direct upload will have PSA as usual & you can do testing in PSA.
second part when you load master data - if error occurs all the records for that request no will be status error so activation will not have any impact on it i.e. no new records from failed load will be available.
hope it helps
regards
Vikash

Why we are not using "Message Control" for Master data ?

Hi friends,
We are using Message control as output determination for Transactional data, what is the main reason for not using the msg control for Master data.Please explain with details...
I am very thankful to them...
Thanks and Regards.
Naveen Kumar. Chamala

Hi Naveen,
 Listing down those I know -
 1. Master data is expected to be changed/created less frequestly.
 2. Transactional data is expected to be chnaged/created more frequestly.
 3. Transactions to create/change/display master data do no have message control integration, since you are not supposed to print/fax/mail master data to your partners.
 4. Distribution of master data in generally supposed to happen within Enterprise boundry and typically you will have one central server maintaining master data which will be distributed to multiple downstream operation system (Some thing where MDM fits). So ideally when distributing master data using ALE you will be sending it to multiple systems.
 5. Distributing transactional data PO/SO etc is same as sending fax/print which fits with the requirement of message control.
Hope this helps,
Regards,
Sanjeev

Excel 2012 SP1 plagin for Master Data Services - Bugs ???

Excel 2012 SP1 plagin for Master Data Services 32bit or 64bit
1.
My entity A has 50,000 records.
Entity B has a domain attribute "City" from entity A.
I successfully add new records to the entity B, but after refresh I cannot see any data in the domain attribute "City" for new records (empty cels)!!! Although in the Web client (or through SSMS in table) I can see the data in "City"
attribute (e.g. code_095 {Moscow}).
If I reduce the number of records in the entity A to 20 000, then I see code_095 {Moscow} in Excel 2012 SP1 plagin for MDS.
Bug???
2.
Why Excel 2012 SP1 plagin for MDS resets the format cells ??? Bug???
3.
I have created rows for my own headings (business captions) above the MDS-table in the Excel-worksheet.
Excel 2012 SP1 plagin for MDS: Why after applying the filter (query from server) Excel-worksheet completely recreated ?
And all my row headers have been removed!!! What the hell ?
from Moscow with money

Superbluesman, is this still an issue? This looks like a bug. Did you file a Connect Item?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Duplicate reocrds for Master data

Hi Friends,
I have a request which contains duplicate records for master data. When i try to load data, after loading to PSA, BW shows an error saying that there are duplicate records.
My requirement is still i need to load the data overwriting the previous duplicate record.
How to do this?
Thanks,
Raja

Hi,
Subsequently i need to load the data to target as well. If i select the option "Only PSA" and "Ignore double data records" the option for "Update subsequently in data targets" is disabled.
Thanks,
Raja

MRM1- transportation is not define for master data

Hi Expert!
i try to set up condition records for consignment order type -KONS. But system has given me this message "transportation is not define for master data". Can anyone tell me is it normal? Or is there anything else i have to set up? Please guide me from here. I have to set up MRM1 in order to allow me to do MRKO.
Thanks.

MRM1 is a customizing transaction, however conditions are master data.
This message just tells you that you cannot transport your records from developement system to a production system, as it is usual for other customizing entries.

REPEAT DELTA WILL WORK FOR MASTER DATA DELTA LOADS

Hi Guru's,
REPEAT DELTA WILL WORK FOR MASTER DATA DELTA LOADS?
AS I AM NEW TO SAP-BI CAN ANY ONE GIVE THE DETAIL EXPLANATION ON IT.
IT WILL BE GREAT AND HELPFULL.
Thanks and Regards,
CM

Hi CM,
yes you can perform the repeat delta even for the master data if the datasource which was supplying the data was delta capable.
You can do the repeat delta only in case if your previous request was erroneous and dont forget to make the request red in the status,so that system will treat like you are requesting the failed request once again where in case you will miss the previous request, i,e erroneous request if you dont make the request red.
when you make the request red manually in the status,the pointer will move to the previous request once again in the delta queue and there will be no chance of missing the delta records.
This process was same for both transaction as well as master data.
Regards,
Sunil...

When to set delta index flag for master data?

In transaction RSDDBIAMON2 option "Set Delta Flag" shows:
Table Name                     |Table Size          |Delta Index
/BIC/FTSGCSGMC          |10,155,000          |check mark in box
/BIC/DTSGCSGM1           |5,000,000           |check mark in box
/BI0/SVERSION               |700                    |check mark in box
When should I check the "Delta Index" column for fact, dimension, and master tables? I believe I need to check fact and dimension tables for delta BIA to occur during roll up so users can see the newly loaded requests but I am uncertain on when and why I should check this box for master data.
Thanks for your input.

Vitaliy,
Thanks for answering another of my question. Yes, we load master data a couple of times a day so based on your answer, I should also check box "Delta Index" for the master tables as well. Thanks for helping me understand this point.
If the below is our approach, #2 should be checked for all tables, correct?
1) Create/fill BIA index for cube "A"
2) Check the box "Delta Index" for all the tables which includes fact, dimension, and master tables for cube "A" .
3) Run process chain to roll up cube "A" daily
4) Run process chain to merge cube "A" weekly
Many thanks,
Thao

DTP for Master data

Hi Guys,
How to extract master data and hierarchies from ECC into BI infoobjects?
Do we follow the same procedure for loading master/hierarchy data as for transaction data - i.e. Load into PSA and then create Transformations and DTPs to load into infoobjects? If so, what is the best approach as far as Full/Delta loads.
1. Is it ok to do a full load into PSA (using infopackage) and then do a full load always (The process chains for master data would be running nightly).
or
2. Should we have 2 infopackages (full and delta) into PSA and then multiple DTPs. (The process chains for master data would be running nightly).
Regards.

Indicator: Only Get Delta Once
Source requests of a DTP for which this indicator is set are only transferred once, even if the DTP request is deleted in the target.
Use
If this indicator is set for a delta DTP, a snapshot scenario is built.
A scenario of this type may be required if you always want an InfoProvider to contain the most up-to-date dataset for a query but the DataSource on which it is based cannot deliver a delta (new, changed or deleted data records) for technical reasons. For this type of DataSource, the current dataset for the required selection can only be transferred using a 'full update'.
In this case, a DataStore object cannot usually be used to determine the missing delta information (overwrite and creation of delta). If this is not logically possible because, for example, data is deleted in the source without delivering reverse records, you can set this indicator and perform a snapshot scenario. Only the most up-to-date request for the DataSource is retained in the InfoProvider. Earlier requests for the DataSource are deleted from the (target) InfoProvider before a new one is requested (this is done by a process in a process chain, for example). They are not transferred again during the DTP delta process. When the system determines the delta when a new DTP is generated, these earlier (source) requests are seen as 'already fetched'.
Setting this indicator ensures that the content of the InfoProvider is an exact representation of the source data.
Dependencies
Requests that need to be fetched appear with this indicator in the where-used list of the PSA request, even is they have been deleted. Instead of a traffic light you have a delete indicator.
Get Data by Request
This indicator belongs to a DTP that gets data from a DataSource or InfoPackage in delta mode.
Use
If you set this indicator, a DTP request only gets data from an individual request in the source.
This is necessary, for example, if the dataset in the source is too large to be transferred to the target in a single request.
Dependencies
If you set this indicator, note that there is a risk of a backlog: If the source receives new requests faster than the DTP can fetch them, the amount of source requests to be transferred will increase steadily.

Datasource for Master Data in CRM

Hi CRM Gurus,
I am working in a CRM-BW integration project. I wanted to know the list of relevant Datasources for Master data in CRM side for which i have to load data in BW side for the Opportunity Cube and Activity Cube.
Also want the list of Datasources for Master Data for Business Partner and Product in CRM system and the relevant Infoobjects(Master Data) in BW side.
Full points will be awarded. Eagerly Awaiting for your help.
Regards
Vishwanath

Hi,
The datasources are:
Opportunity - 0CRM_OPPT_H - Opportunities header
0CRM_OPPT_I - Opportunities Items
Activities - 0CRM_SALES_ACT_1 - Activities
Master data -
0CRM_OPPT_CYCLE_TEXT
0CRM_OPPT_PHASE_TEXT
0CRM_OPPT_TYPE_TEXT
Business Partner
0CRM_BPART_ATTR
0CRM_BPART_TEXT
Products
0CRM_PRODSL_ATTR
0CRM_PROD_ATTR
0CRM_PROD_HIER
0CRM_PROD_IDCMP_TEXT
0CRM_PROD_TEXT
0CRM_PROD_TYPE_TEXT
These are indicative. Do a proper business blueprinting for all your needs.

Return code 8 when we import transport request in production server

Hi,
I imported one transport request in Production server. I got the error "Ended with return code 8". I checked the log. It shows " R3TRMSAGZDVLP_MSGCL was repaired in this system" and "LIMUMESSZDVLP_MSGCL051 was not imported in this step"
How to i rectify?
Regards
Somu

Hi,
The particular object has been changed by some one in your production server.Here you can check whether there is any particular transport request in which the object R3TRMSAGZDVLP_MSGCL is included.if so release that request and perform the import again.If you are sure that you want to import is ignoring the repair then use unconditional mode for the same at the time of import.now the import will be successful without issues.
Regards
Ashok

SRM Field Control for Master Data fields e.g. hide Street prefix

Hi Experts,
we are using SRM 7 Ehp1.
For the RFx process we need to create bidders.
To simplify the creation of the bidder for the users we would like to hide
all unnecessary fields e.g. Street prefix / Street suffix.
I tried to use the customizing img "SAP Supplier Relationship Management --> SRM Server --> Cross-Application Basic Settings --> Extensions and Field Control (Personalization) --> Configure Field Control"
I've tried the function "Configure Control for Fields on Header Level".
There is a business object type BBP001 for bidders but only 4 fields are available for field control.
It seems this customizing entry is only for transaction data, e.g. SC, PO but not for master data.
Is it possible to hide fields for bidders within SRM?
Thanks in advance for your help!
Kind Regards
Stefan

I've enhanced the relevant web dynpro component view.
Created an post exit to the method WDDOMODIFYVIEW.
Regards
Stefan

Request in Production server for Master data

Similar Messages

Maybe you are looking for