First underscore in string gobbled up by control in display text

How do I go about preventing the first underscore in my display strings from disappearing. I realize it is probably related to mnemonics, but I have not set them for my controls (split menu button, menu item, and menu). I searched the forums and documentation, but I couldn't find anything related to escaping and underscore.

Try setting the mnemonicParsing property to false.
http://docs.oracle.com/javafx/2/api/javafx/scene/control/Labeled.html#setMnemonicParsing%28boolean%29
MnemonicParsing property to enable/disable text parsing. If this is set to true, then the Label text will be parsed to see if it contains the mnemonic parsing character '_'. When a mnemonic is detected the key combination will be determined based on the succeeding character, and the mnemonic added.
The default value for Labeled is false, but it is enabled by default on some Controls.

Similar Messages

How to concatenate string with a numeric control ?

Hi,
How to concatenate string with a numeric control ?
Thankyou.
Solved!
Go to Solution.

Its simpler to just use the Format Into String.
Attachments:
Format Into String.png ‏11 KB

First char of String

How can I get the first character from a string? I was given the code below before but I do not think that it works correctly. If it does work then can more people please look at my previous thread and give me a hand.
char firstNumber = inputString.charAt(0); //first character of string
char secondNumber = intputString.charAt(InputString.length()-1); //last character of stringAs always, any help is greatly appreciated

Apart from the obvious typos, it looks just fine to me. Why don't you think it works?

Controlling the display of the help (?) button

Has anyone had any experience with controlling the display and linking of the help button? I have two questions in particular.
First, how do I force a channel to not display the help link (the question mark button)? I have several channels that do not have the helpURL property defined, but the button still shows up?
Second, where are the links/image elements defined for the help/edit/minimize buttons? the leafWrapper.jsp pulls the hashtable out of the HttpRequest, and that hashtable is being used by providerCommands.jsp:
Hashtable commands = (Hashtable)request.getAttribute("provider_cmds");
Any idea where this is being set?
Thanks for the help ;-)
Matt

I've got a very similar situation. I'd like to tie a channel to a particular help file (on the same host that the channel is served by). I log in using the amAdmin account (for some reason I have to put a capital A for the Admin part, but that's another issue), select my Organization, show roles, click on the appropriate role, show Services, click the link after Desktop, click Channel and Container Management, then Edit the URLScraperProvider channel. I've filled in the values for title, description, url, and width. The remaining properties are apparently inherited from the provider, and include urlScraperRulesetID (default_ruleset), fontFace1 (Sans-serif), productName (Sun ONE Portal Server), cookiesToForwardAll (checked), inputEncoding (iso-8859-1), cookiesToForwardList (I haven't changed anything here), and timeout (100).
I don't see helpURL anywhere in the properties associated with my channel, however, there definitely is a help button on the channel, and it goes to some generic Sun ONE documentation on URLScraper channels.
When I attempt to add a string helpURL property (leaving the value blank, or setting the value to "", or point it at the URL the points to my help file), and submit the form, I get an error message indicating "A property with the same name already exists."
So, what am I doing wrong? Is this the right place to be setting the helpURL? If not, where should I do this?

How to change slider control digital display precision from program

I want to change slider control digital display precision from my Labview 2013 program. I can not find property that changes slider digital display format.
Solved!
Go to Solution.

rt clk the digital display>create>property node>format string
you could also do the slide scale, if needed...
from the front panel:rt clk properties>goto display format tab>goto drop down list and pick "digital display 0" and format

Change Table control Column Header text dynamically

Hi,
I have an requirement to change table control column header text dynamically.
i.e. I have about 10 columns in table control, out that need to change 5 columns header text. These header texts are stored in an internal table.
I had looked into the below link but could not get exactly how to do it.
Dynamic headers in table control
Could you please tell me how to do that.
Thanks in Advance.

Hi Saba,
What you will need to do is this.....
1. First replace the column Header Text box by I/O Fields and name them accordingly.
Say for example we will consider the same example which i had explained in the link.
there in the column header we want the header to change when some dates and entered into two fields which are out of table control say
Start Date: 01.01.2010 to End Date: 06.01.2010
Now we want the header to look like this,
Column No.    -        1               2             3                  4               5               6
Header label   -    01/FRI       02/SAT     03/SUN       04/MON     05/TUE      06/WED
Header name -    SPOTS1   SPOTS2    SPOTS3      SPOTS4     SPOTS5    SPOTS6
then you go as per the instructions in the link......
Let me know if you need further help,
Hope this solves your problem....
Regards,
Abhijit G. Borkar

The first row behind the words,Why does not be displayed?

The first row behind the words,Why does not be displayed?
The first line of why will automatically fill?
The File(IDcs6) [Link to know attack page removed by moderator]
Message was edited by: Peter Spier

Filedown has a nasty reputation in English-speaking countries - plenty of antivirus/antimalware apps block everything there by default, which is what Peter has done. It doesn't mean that your link is malicious, only that it's hosted somewhere that has been used to host malware in the past.
I'm pretty sure, Peter, that there aren't any nonbreaking spaces there, because I'd wager that there aren't any spaces there at all. It's justified text, and the reasons why it will or will not break are sometimes obscure when using composers that aren't the J composer. Chinese text is usually entirely free of spaces, except in certain circumstances, usually involving European language inserted into Chinese text. Sometimes, for reasons I don't understand, InDesign will simply treat Chinese as if it were English, and only break at spots permissible in Euro languages. That's not the case here - it obviously breaks between two Chinese glyphs, so something else is up here.
Which version of InDesign are you using? Are you keying the text directly into InDesign, or are you placing, or copying/pasting?
If you're using an English version of InDesign, I would suggest trying to save your Chinese text as raw text or RTF and File -> Place that. If you choose RTF, try to mark it with Chinese language in your RTF editor (Word?) if possible.
Is No Break applied anywhere in your text? You can check in the Story editor (Control/Command Y) to see what styles and formatting are applied.

ActiveX control want display on other computers

I have created an ActiveX Control for the Internet using Visual Basic
Control
Creation and also using National Instrument's Labview Component Works.
It displays locally and on a Internet Unix server from my PC (Windows
98),
but when I try to display it on another PC on the Internet it does not
display.
I made sure I placed the .cab file and .htm in the same directory on our
Unix server.
I also modified the codebase line for the .cab in the .htm file to not
be the same case
size for the UNIX server. I also used the LPK tool to create a License
package.
Do I need to get a Certificate before the ActiveX Control will display
on other users computers (other than the development computer) across
the Internet?
Could someone please help me with this issue? Thanks.
Randy Jordan
[email protected]
256-544-1955
Fax - 256-544-6322

Hi Randy,
as far as I know the things are:
- you made a ActiveX control
- in order to see your control, another computer should download it first
- it will download it if the Internet settings (on that specific PC) will allow this
- most of the users have "download unsigned controls" option disabled and "download signed controls" option on prompt
- thus, you will need a signature in order to have your control downloaded by many others
- to obtain a signature (digital ID) take a look on www.verisign.com (http://www.verisign.com/developer/rsc/gd/authenticode/)
that's it, hope I didn't forget something

HP LaserJet Enterprise 500 color MFP M575 control panel display

HP LaserJet 500 color MFP M575 have no Display. and is not anymore possible access any function. What is the problem behind that ?How can we solve this issue ? is it the problem with the control panel display or the logic board ? there is no dim memmory instaled in the system .

Good day,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Can't assign a string value to a member of type TEXT in Calculation Manager

I can assign a string value to that member of type TEXT using a run-time prompt of type StringToNumber.
Example: "My Text Member" = {string_rtp};
However, I need to accompllish the same function without using a run-time prompts.
I have a planning application and I know that text along with all other non-numeric
values are stored on the relational side in the planning application schema.
It seems reasonable to assume that if this can can accomplish
with a run-time prompt that I could do also do it without a run-time prompt.
What appears to be lacking is a function like:
"My Text Member" = @StringToNumber(<String Literal>);
Clearly, this is already being done "under the covers" for run-time prompts. If
would appear to be a minor enhancement to expose such a function to developers.
NOTE: I suppose you would also need to add new syntax/function to identify a string
literal from say a member name. I'm wondering if this is the more difficult challenge
from a product perspective????

When executing a Calculation Manager rule in Planning, the run-time prompt (RTP) is populated by looking up the outline information present in the relational Planning application database. If the RTP is of type TEXT, the strings displayed in the member select are from the from the relational Planning application database too. Subsequently when executing the Rule, the RTP's value is in fact the record ID (a number) which is then saved into the appropriate intersection in Essbase.
You need to bear in mind, the Rule is executed in Essbase. If Essbase needs to "write" a text, it would then need to connect to the Planning relational database to create a new record. The newly created record ID then needs to be feed back to Essbase, in order to store it in the appropriate intersection.
What you are suggesting, comes with a big overhead causing Essbase and the rule to slow. Thus, the disadvantages outweighs the advantages.

HP LaserJet M1120n Multifunction Printer, control panel display

Hi,
Yesterday here was an electrisity cut. After that all devices worked normally, except the printer. Control panel display of the printer was out of function and control panel buttons didn't work.
I turned the printer off and waited some time. After that I tried to restart the printer. I heard that the printer started, but the display didn't work though, even I waited couple of hours . How could I solve this problem and can you help me?
BR Vesa

Hi @Vesa57 ,
I see that the display isn't working on the printer since you had a power outage. I will certainly do my best to help you.
Can you still print to the printer?
Make sure there is no damage on the power cord and that it is connected directly to a wall outlet.
The printer shouldn't be exposed to any electric or magnetic field.
Try another power cord, you can use a monitor power cord to test it. Just to rule that out.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 30-60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Try another wall outlet in another room, on another breaker. Just to make sure that isn't causing the issue.
Please call our technical support at 800-474-6836 if the issue continues. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to save the value in Cedit control into a text file bu using measurement studio c++?

Im using measurement studio c++ to create a application. How to save a randomly generated value which display in the CNumberEdit Control to a text file? how to do the coding part?

You can use the CNiFile class to write the value out to a file. For example, create a new Measurement Studio C++ project and follow these steps:
Add a CNiNumEdit to the dialog.
Add a member variable for the CNiNumEdit called m_numEdit.
Add a button to the dialog.
Double-click the button to add a message handler for the button's BN_CLICKED message.
Add the following code to the button's BN_CLICKED message handler:
CNiFile file("C:\\Values.log", CFile::modeCreate | CFile::modeWrite | CFile::typeText);
file << m_numEdit.Value << endl;
file.Close();
Run the application, edit the CNiNumEdit's value, and click the button. The value should be written to the Values.log
file as specified in the code above.
Hope this helps.
- Elton

SSRS web based report viewer control rendering issues - text getting clipped chopped off

Hi,
I am using web based SSRS report viewer control to display SSRS reports in browsers like Chrome, FF, IE, Safari etc. My issue is some text is getting chopped off (clipped) in all cells of some reports. I investigated on my end by analyzing generated HTML
and I could see a problem in the HTML that report viewer control is generating. But I am afraid to apply any HTML or Javascript hacks at the moment considering we have hundreds of reports.
You can see in above image how text got chopped off. The problem in HTML (given below) is the text has been wrapped in a div tag with a fixed height. If I remove the height and also padding on parent TD, the text appears properly.
<td class="A23dfe7c5f99245f2a0db522a22a6035597c" style="HEIGHT:5.00mm;background-color:#d3d3d3;"><div style="HEIGHT:3.24mm;overflow:hidden;"><table lang="en-US" cellspacing="0"
cellpadding="0" border="0" class="Pd9776e5f7eaf4df696265b8b49d1da39_1_r17"><tbody><tr><td class="A23dfe7c5f99245f2a0db522a22a6035597" style="word-wrap:break-word;white-space:pre-wrap;">MyType11</td></tr></tbody></table></div></td>
Please let me know if you have faced a similar scenario before.
Here is link to stackoverflow thread -
Stackoverflow thread
Regards
Murtaza

Hi Murtaza,
According to your description, when you display the report with Report Viewer control, the data within the text is cutoff.
Based on my research, the issue could cause by that Arial Unicode MS font hasn’t been installed on the server where Reporting Services run. Besides, when we use ReportViewer control to render report, we’d better set
AsyncRendering="true" in the Report Viewer control. Also please run the IE with compatibility mode. For more information, please refer to similar threads below:
Data in column getting cut-off in report viewer control
SSRS Rendering Issues
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

How to clear the reader control when displayed on a Win Form?

Hello
I am using the reader control to display a pdf using VB.NET 2008 on Windows XP / Win 7. The pdf is realted to a record displayed in a grid. The problem I am having is I can not find a way to clear the document.
The grid is filtered and can be changed by the user. When the filter changes the reader control has no file to reference, but I can not find a "clear" function. When the form loads the reader control is nicely blank but I can not revert to that state. I created a blank pdf but that is confusing because the toolbar remains. So what now? Hide that? Then hide the scrollbars and hope more quirky things don't happen.
Is there a way to have an empty reader control (like it exists when the form loads) without destroying and re-creating the control every time?
Thanks
JM

Hi Derek,
I would suggest you check out a piece of freeware called 'CCLEANER' from the following link :_
http://www.ccleaner.com/
I use this myself on a regular basis to clear out unwanted bits and pieces from my system including internet cookies which I do not want.
Be careful though, it can sometimes clean more than expected. :)
regards,

Officejet pro 8500a control panel display is all white. Any fixes? Can it be repaired?

Control panel display is white. Can't see any of the functions. I know there has been alot of problems with this printer. Has anyone gotten this display panel repaired or replaced? Any help would be very appreciated thanks!!!

Hi ellis056
I'd like to help you with the display screen. There may be a firmware update for the printer, please select your printer from the list below to download and see if there is an update available.
HP Officejet Pro 8500A e-All-in-One Printer - A910a
HP Officejet Pro 8500A Plus e-All-in-One Printer - A910g and A910n
How Do I Find My Model Number or Product Number?
Also, do you have the printer connected to a wall outlet for power or a surge protector?
Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see,
ISSUE:
Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
This is not limited to Laserjet printers.
If you have the printer connected directly to a wall outlet, you can try doing Resetting the Printer.
Please let me know if either of these solutions resolve the issue, thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

First underscore in string gobbled up by control in display text

Similar Messages

Maybe you are looking for