Fiscal year not changed in asset accounting

Hi,
I am not able to open new fiscal year for 2008in asset accounting  even i completed
depreciation run and i closed previous year closed.
can you please help me this is very urgent some of the bills are pending because of my user unable to post the values due to fiscal year not yet opened.
Thanks in advance.

Thanks Guna,
BUT here thing is even i run afab for depreciation and ajrw for new fiscal year change ajab for closed year  still it is getting error message, when Asset balances report for 2008 getting message fiscal year not yet made , this is very urgent please give me some more details .
Thanks in advance.

Similar Messages

  • Change fiscal year to 2006 in Asset Management : error in year-end closing

    SAP version: 4.0B
    Transaction Codes used: Year-end closing – AJAB, Fiscal year change – AJRW
    We are trying to change the fiscal year to 2006 in Asset Management.
    I tried to change the fiscal year to 2006 for the company code 0055 using transaction code AJRW. The test run has displayed an error message “Fiscal year change in co. code 0055 1 possible only after year-end closing 2004 2’.
    I have used the transaction code OAAQ to find the out the fiscal year, the closing for depreciation area is successfully performed.
    Unfortunately it is still showing ‘2003’ which should have been 2004 for company code 0055.
    I tried to close the fiscal year 2004. The test run has completed successfully. I have scheduled the ‘RAJABS00’. The program has executed successfully with no errors or warnings.
    The closing for depreciation area (Transaction – OAAQ) is still showing 2003 for company code 0055, which should have been changed to 2004.
    I am new to Asset Management. Can you please give some suggestions on how to fix the problem and change the fiscal year to 2006.
    Thank you,
    Vidya

    Hi,
    Thank you very much for your prompt reply.
    I have used transaction OAAR to check if any area is still open for previous years.
    Surprisingly! The areas are closed only till 2003.
    Can you please let me know what to do (transaction codes - programs) to close the areas for fiscal year 2004.
    I am new to Asset Management. I think you are good in Asset Management. Can you please give some suggestions on how to close the fiscal year 2004.
    Can you please let me know if I have to run any other transactions other than closing the areas before running the transaction to close the fiscal year 2004.
    Thank you very much.
    Sincerely,
    Vidya

  • Fiscal Year Variance Change affected AA Balance and Recalculation of Values

    Hi Experts,
    I have a scenario where we change the Fiscal Year Variance on certain Company Codes. The Fiscal Year Changes were on Period 12 from Nov 26th to Dec 31st (last Fiscal Year Var was until Dec 25th), and Period 1 of next Year will already start at 1st of Jan (Last Fiscal Year Variance was from Dec 26th) until 26th of Jan.
    We encountered a discrepancy on some reports especially on the FI-AA Balance Report, where as some posted entries for the Assets were not included.
    Then I investigated. I found out that the Recalcualtion of Values is always based on the entries of table ANEP where the fiscal period 2011 did not include some postings done on th 30th of Dec because of fiscal year variance change.
    In the Asset Values of the asset, it shows no discrepancy there although the info-dialogue box is appearing to recalculate the values of the asset. They already posted in Period 11 of this year after the changed fiscal year variance without recalculating and currently the planned values are different. The users are okay with the posted depreciation run since the asset balance per year is still correct. But if we recalculate the posted entries for asset acquisition on Dec 30th, the acq amount/asset balance will already be incorrect.
    My Current solution is to enhance the function module FIRST_DAY_IN_PERIOD_GET to show that if the values of Fiscal Year = 2011 and Period = 1, then it will get the date 26th of December 2010. I know that this Function Module is widely used for all modules but since we already changed Fiscal Variances maybe this will also correct some reports or functions that includes Fiscal Starting Dates.
    Or are there any solution for this scenario? Is this solution advisable?
    Edited by: Cecilio Cruz II on Dec 6, 2011 8:32 AM

    Have you done the impact analysis of changing the fiscal year variant directly? I would suggest you may need to raise an OSS note with SAP. The change must have affected different areas.

  • Accomodating Different Fiscal Year Variants in Fixed Assets.

    Hello All,
    Our client wants to maintain two separate and distinct fiscal year calendars for Fixed Assets:
    1. One for Financial statements (Oct - Sep) and the other for
    2 .Tax reporting and compliance purposes. (Jan - Dec)
    How would you accommodate this requirement ?
    Thanks.

    Thanks Vijay,
    But a different fiscal year version can only be used in Asset Accounting if the start and end dates of the versions in Asset Accounting and Financial Accounting are the same.
    This is not the case with us.
    Dep Area 01 for Company financials is 4-5-4.
    Dep Area XX for Local Legal Req is Jan to Dec.
    How do you accomodate this ?
    Thanks.

  • AA821 - Company code  not defined in Asset Accounting

    Dear Experts,
    We are trying to Settle AUC using AIBU. Wherein we found error "AA871 - Company code  not defined in Asset Accounting" in the last fiscal year
    When we try to settle in current date, it is not giving any error.
    We found one sap note "SAP Note 459719 - AIBU: Message AA821,AW521 for settlmt rule with "To" period". The note mentions that we need to remove the to period and to fiscal year from the settlement rule in transaction AIAB. However, there is not settlement rule in AIAB, instead there are documents posted to AUC asset.
    Can any one assist in where to update the settlement rule or any alternative solution to the error mentioned above.
    Thanks in advance.
    Regards,
    Nirav

    Dear Ravi,
    Thanks for your reply.
    Even I encountered the same note.
    However, it is not the solution.
    The solution was to detach the existing Settlement Rule and create a new one.
    Thanks anyways.
    Regards,
    Nirav Shah

  • Getting error while Year end closing in asset accounting for the year ...

    Hi,
        i am getting error while doing Year end closing in asset accounting for the year 2004. It is giving few assets and saying that "Depreciation not posted completely"
    Can any body help in this reagards.
    With regards,

    Dear Shree,
    Do u have the list of all such assets for which no depreciation has been posted. If yes, then go to AFAB, upload the list all these assets & then select the radio button as 'repeat'.
    This will post you depreciation for all the assets. then close the year.
    regards,
    Ajay

  • I bought Ipod touch from US. right now I am in Thailand but I could not change my official account

    I bought Ipod touch from US. right now I am in Thailand but I could not change my official account as in my country. It keeps be as Canada why?

    Have you edited your account to change the address to a Thailand one and the payment method to a Thialand one?
    See:
    How to Change Your App Store Account Location | eHow.com

  • Fiscal year not defined for in Year

    Dear All
    I am trying BDC to record hiring action through PA40 for the purpose of mass hiring. While hiring process at 'Create Car & Conveyance allowance' screen a warning message appears "No automatic updation for pernr 12345 .Allowance grpg not found." I skipped it, then another error comes at  'Create Income From Other Sources' screen, that is "Fiscal year not defined for  in Year". In the description of this error I find 'Fiscal year not defined for  in Year'. I checked PA03 also, but I didn't find any clue there.
    Kindly enable me with your expert suggestions to go ahead.
    Best Regards,
    Anand Singh
    SAP HR Consultant

    HI,
    1. Allowance Grouping
    - Check the hiring date and Infotype 8 date.
    2. Income from other sources
    - Check the control record .
    Is it released for the year for which u r entering the data.
    Regards,
    Param

  • Fiscal Year End change

    Our current Fiscal Year variant is April – March. However we have now been bought by a different company and the fiscal year end needs to change to Jan-Dec. Therefore this year will be a shortened year.
    I have a couple of questions:
    I can see in SPRO that the fiscal year can be changed (transaction OB29) to accommodate a shortened year. Currently our year is set up under K4 which is year dependant not calendar dependant. How do I modify this? Do I move the tick from one to another (ie to calendar year), or do I need to copy the K4 and use it as a new one. If I do this what else do I need to do, I know if I changed it I would need to allocate it to the company code.
    2. When do the changes need to be in Production, is it before year end, last day after everyone has gone home, on day 1, or once the accounts have been finalised? I assume I could make the changes in Dev/QA before then and fully test?
    3. I understand that I need to do something on Asset/Depreciation. Again please advise on the timing of this.

    I wonder if you can answer something further. Our financial year used to be Jan-Dec, which meant the fiscal year number (i.e. 2002) would be the same as the calendar year date. Then we had a shortened fiscal year so we could move to April-March. This meant for example that this year (April 07 to March 08), our fiscal year is 2008. We have just had a change of ownership and yes you guessed it, the financial year needs to move again, so we are having another shortened year ending in December. This means that our next financial year which be 2009, which covers January 08-December 08.
    My question is, how do I let people see this when running reports etc. In   IMG you can specify text for the period, however when looking at reports or data in any part of the system, this does not seem to appear anyway.
    How has anyone else got round this?

  • Year end closing for asset accounting,

    Hi guru's
    whne i was trying to close the asset fiscal year it was throwing erro "Transaction  not completerly periodically posted" what would be the reason could any body help me out to resolve the issue.
    value points assigned
    thanks
    sunitha

    HI
    Run AFAB in Test mode for 12 period that is March and check what error it will show. Now for a mean time your problem will be solved by opening the Fiscal year of the Asset and can carry on the regular transactions in Asset Accounting in the new fiscal year. Later on when the Dep is runned for the entire old fiscal year then close the old fiscal year.
    Regards

  • Fiscal Year Variant change

    Hello,
    We are being asked to switch our fiscal year variant from 445 to calendar month based beginning 1/1/2010.  I am curious as to how to approach this change from the BW perspective.
    I first did a quick look at the system to see how and where fiscal year variant is used. 
    What i found is that:
    1. Fiscal year variant is used in our cubes as part of the transaction data
    2. Almost all the queries have the FYV as part of the query definition.  (won't be able to restrict to just 1 FYV since it will rule out many records since FYV is part of transaction data in our cubes)
    3. Many queries compare current Fiscal periods to prior fiscal periods and and ranges too.  This is enabled by using variable exits for 0FISCPER etc.
    4. There are some Restricted Key Figures that have the FYV as part of thier definition.
    5. Many DSO objects have the FYV as a key field.
    What do you recommend from your own experience with regards to how to handle this change.  I am curious what the impacts will be and what I should be prepared for.  I am guessing that data in our DSO's will pile up since starting 1/1/2010 every record will have a new FYV (remember FYV is a key field), also I am curious how time based variable exits will work, since I think they depend to some extent on a single FYV.
    Any advice or recommendations on how to approach this change is appreciated.  Also what decisions have to be made if any...
    Thanks!
    Nick
    Edited by: Nick Bertz on Dec 3, 2009 3:17 PM

    Hello,
    Okay here is one thing that i have run across that i do not understand.  I am using Offsets in a query.  Everything works fine with regards to these offsets, except for when i introduce 2 Fiscal Year Variants. 
    Once there are 2 fiscal year variants, the offsets are completely ignored.
    Does anyone have an explanation why variable offsets would no longer work when there are 2 fiscal year variants on the same report?
    When i launch this query in the web browser from Analyzer I get the following error message:
    Diagnosis
    Variable ZS_FPER2 contains a fiscal year period which is to be moved by 10 periods. Before this can occur, the fiscal year variant must first be specified clearly so that the number of periods in the fiscal year can be determined.
    System Response
    Procedure
    If the fiscal year variant exists as a variable, enter a value for this variable. If the fiscal year variant is not specified in the query, you must include it in the query.
    You can specify the fiscal year variant either globally or for the InfoProvider specifically.
    Procedure for System Administration
      Notification Number BRAIN 618 
    Thanks,
    Nick
    Edited by: Nick Bertz on Dec 29, 2009 4:15 PM

  • Copy fiscal year vairiant changes from R3 to SCM

    Hello Gurus;
    We have a requirement to change our fiscal year start and end dates for the current and future year. We are using program "RSIMPCUST" to copy changes in fiscal calendar from R3 to SCM.
    My question is : Do we need to de-activate the demand planning area and then copy the Fiscal calendar changes and re-initilise and copy the data from back up cube  Or we just have to copy the FY changes from R3 to SCM and re-initialize the DP planning area.
    Thanks in advance for guidance in advance.
    Thanks and regards
    Rajesh

    Why de-activate planning area ? - Because, we are making structural changes against which data already resides in planning area.
    Now, before making changes, you need to plan the back up of data, make changes in FYV, and then load data into planning area with new FYV.
    Before, you go about, please study below points and plan accordingly -
    1) Changes in both fiscal year variant (Months & weeks)
    2) Storage bucket profile
    Importantly, note that when loading data from back up cube, make sure it is loaded at month and week level (i.e. u2013 exclude Fiscal variant bucket), as the fiscal variant bucket mapping to month and week will have changed awhen you try to load the data in planning area (post FYV changes). Hence, post data loading in planning area, it should appear against new FY buckets when viewed by user.
    (Example u2013 Previously M1-W1-F1 = 10, M1-W2-F1 = 20, Hence, F1 = 30. After changes you make, say, M1-W1 as F1 and M1-W2 as F2, user should see F1=10 and F2-20).
    Thanks,
    Prashant Ghule
    Mahindrasatyam

  • Fiscal year calendar change

    Hi Experts,
    Our client wants to change the period end dates and keep the variant as it is in this month (Fisacal year Jan to Dec). Some postings were done in Jan and Feb.
    Is the right time to change the periods now ?
    Is there any adverse effects with this change ?
    What is the right time to change ?
    If client is very particular about change, what are the SAP notes to be followed ?
    Regards
    Madan

    Hi,
    let me know how your fiscal year defined?
    If it is Apr to Mar, posting happing during Jan & Feb should have been done in posting period 10,11
    If you are going to change your posting period to calender year i.e. Jan to Dec, , then posting in Jan & feb will be period 1 & 2
    Thanks,Surya

  • Funds Management and Fiscal Year Variant Change

    Hello !
    We are configuring a new fiscal year variant.
    Currently, the system is on a CALENDAR YEAR FY variant and we are doing the following:
    1. creating a shortened FY of Jan 2009 - Mar 2009
    2. new fiscal year from April 2009 - Mar 2010
    We are trying to change the FY variant for Funds Management via OF15 but receive the error FI674.
    FI674:
    You must not change the fiscal year variant in Cash Budget Management or Funds Management for FM area FM01 if actual data already exists for FM area FM01, or if one or more of the company codes assigned to FM area FM01 is active.
    We have found oss note 719597 which details how to change the FY variant for Cash Budget Mgmt, but it does not apply to Funds management.
    I could find no other supporting documentation.
    Can anyone guide us as to how to deal with this issue?
    Thank=you !

    Hello Patti,
    The point is that it is not possible to change fiscal year variant if actual values exists.
    You are trying to do a change in January. You probably have some postings in 2009 already.
    In the area of PSM-FM there is no note like 719597 of TR-CB.
    Only if no actual values exist, this customizing change would be possible and reasonable.
    If you are doing this setting in your customizing client, you can delete the postings (please DO NOT do it if you are in production) that exist in 2009 and try again.
    SAP do not recommend to change a Fiscal Year Variant that has already been assigned to a company code and has already some postings. This may  create database inconsistencies.
    You can create another Fiscal Year Variant with the information that you want to be customize, and this variant you will be able to assign to a company code. Before you assign this new variant to a company
    code please be sure that none of the information that you already posted in this company code will be affected, this information you may review it with your consultant on-site.
    Also please review/apply note 173636, 202687, 10945, 193713, 123026, 210861 which may happen in your system.
    The fiscal period is related to the posting date via the fiscal year variant. E.g.: I you do a posting on 5.5.2009 it will be posted e.g. in period 5 for fiscal year variant 'A'. This period is not only used in the document header table (BKPF,VBRK,MKPF ...) but also in several balance table (GLT0, KNC1 ...) not only in FI but also in SD, MM, CO .... If in the new  fiscal year variant 'B' this posting date is related to another period e.g. 7 the relation between documents and Periods and balances will be destroyed.
    The problem will be enhanced if the posting-date would be related to diffrent fiscal years.
    In addition several reports in AP/AR and GL reread period-depend data by selecting the posting-date regardless of the period in the document because it's not normal practise to change the fiscal year variant of a company code.
    Some of the involved issues are:
    - FM actuals and commitments may need to be reconstructed if their period- (or even fiscal year-) assignments is changed.
    - FM actuals/commitments can not be reconstructed if fiscal year change activities have already been performed (commitment carry forward, FMJ1, FMJ2).
    - Budgeting data and assigned values may principally be concerned as well, especially if you are working with period values in budgeting.
    The change of fiscal year variant has several implications and should be analyzed very carefully.
    Please check note below for more information:
    Note 672255 Shortened fiscal year / changing fiscal periods
    I hope it helps you and good luck
    Best Regards,
    Vanessa.

  • Fiscal Year Not allowed while creating the Process order (COR1)

    Hi Friends,
    My Indian client is following the Fiscal year of 2011 for the period of April 2010 to March 2011). We have gone live one month before. But now the problem we are facing is while creating the process order (T.Code COR1) system gives the error message "Fiscal year 2010 is not allowed".
    The Diagnosis shows as below
    Fiscal year 2010 is not allowed
    Message no. F5568
    Diagnosis
    The fiscal year entered (2010) is different from the fiscal year derived from the posting date and fiscal year variant (2011).
    System Response
    Error.
    Procedure
    Correct the fiscal year entered.
    I have Checked the Controlling area version. Fiscal Year 2011 starts from 01.04.2010. This issue is only at the time of Process oder creation and not in other module like FI, MM, SD, PS, QM and PM. I have checked with V3 Variant also and there is no problem with that.
    Can any one help me where the setting is missing or what whould be the probable reason for this issue.
    Regards,
    Deva

    Hi Prakash,
    Thank you for your reply. I have checked the MMPV and MMRV set up and that is fine with fiscal year 2011. We are also processed lot many Material receipts for the fiscal year 2011. I have checked with OB52 for finace it is opened for the entire year of 2011 from 2009 for all periods.
    We are facing only when we try to create the process order. When we enter the starte date as 24.11.2010 the derived period shows as fiscal year 2011. But entered fiscal year shows as 2010. We are not entering any other dates in the process order.
    Is there any other probablity the date is picking from any Production related set ups??
    The costing version fiscal year 2011 starts from 01.04.2010. So no problem with Controlling area. I have Checked the Factory calendar. The calendar starts from 01.01.2010 to 31.12.2010 for the year 2010.
    Is there any other possibility of the missing settings or problem in date control???
    Regards,
    Deva

Maybe you are looking for