Fixed Length of a field in the File-XI-RFC Scenario

Dear All,
I am doing one File-XI-RFC scenario in which user is sending me the file with some delivery nos (VBELN) in it and I am sending those all delivery nos to my RFC in R/3.
Now I want one conition to be put that if any delivery no is of less than 10 characters than that delivery no should not be sent to RFC rest the remaining will be processed to RFC.
I have put one UDF for this whose code is as follows:
int len = a.length();
if (len == 10)
int b=1;
b = (1/len);
return a;
But this code is not working. Please guide me how to solve this problem.
Regards,
N.Jain

HI,
Input is A : Delivery No take all the delivery no in one context.
for(i=0;i<A.length;i++)
int b= Integer.parseInt(A); it will remove all the leading zeros if it has any.
int j=(new Integer(b).toString().length()); count the lenght of the Del no.
if(j>10)
result.addValue(A(i));
else
result.addValue("null"); will not send anything.
Thanks and Regards,
Chirag gohil

Similar Messages

Need a pipe delimiter after every field in the file on application server

Hi ,
i have to transport data in internal table to a file on application server.
I have done this successfully. But the problem is i have to put a pipe
delimiter after every field in the file on application server.
Could yoe plz help in this issue.
Thanks & Regards
Suresh kumar D

Hi Should,
 I think the below code should solve your problem as i also had a similar type of requirement and this was the code i had used in my program.
FIELD-SYMBOLS: <FS> TYPE ANY.
DATA: L_FLINE TYPE STRING.
Open file for output
M_CHECK_SELSCR_FNMS O1 O.
LOOP AT I_TARGET.
Write records to file
 DO.
 ASSIGN COMPONENT SY-INDEX OF STRUCTURE I_TARGET TO <FS>.
 IF SY-SUBRC EQ 0.
 IF SY-INDEX EQ 1.
 MOVE <FS> TO L_FLINE.
 ELSEIF <FS> NE C_PIPE.
 CONCATENATE L_FLINE C_PIPE <FS> INTO L_FLINE.
 ELSE.
 CONCATENATE L_FLINE <FS> INTO L_FLINE.
 ENDIF.
 ELSE.
 TRANSFER L_FLINE TO W_SRVR_NM_O_O1.
 EXIT.
 ENDIF.
 ENDDO.
ENDLOOP.
Close file
CLOSE DATASET W_SRVR_NM_O_O1.
IF SY-SUBRC EQ 0.
 MESSAGE S208(00) WITH TEXT-M02.
ENDIF.
Regards
Sikha

How to skip one field from the file by using sqlldr

Hi ,
i'm using DB 10g R2 on Redhat ,
my control file hereunder ,
LOAD DATA
INTO TABLE reber.AAA_BILL
APPEND
REENABLE DISABLED_CONSTRAINTS
EXCEPTIONS reber.AAA_BILL
FIELDS TERMINATED BY '|'
(Streamnumber ,
MDN ,
USERNAME ,
DOMAIN ,
USERIP ,
CORRELATION_ID ,
ACCOUNTREASON ,
STARTTIME ,
PRIORTIME ,
CURTIME ,
SESSIONTIME ,
SESSIONVOLUME ,
RATEPOLICYIDX ,
FEE ,
GROUPID ,
SERVICEID)and this is one records of the file ,
222|1|0664363446|12D0DC90||10.15.6.45|007b8aa5|3|20111029204824|20111029204824|20111029211504|1600|0|147|0|4000|10154|really i want to skip the first field in the file which is (222|) and starting from the second field ,
any help please

Thank you for you reply ,
really i know the Filler to skip colomn from the table , is the Filler working also to skip field from the File . i'll read the link to check this

Code for reading particular fields from the file placed in application

hi,
code for reading particular fields from the file placed in application server in to the internal table.

Hi,
Use the GUI_UPLOAD FM to upload the File into ur Internal Table.
DATA : FILE_TABLE TYPE FILE_TABLE OCCURS 0,
 fwa TYPE FILE_TABLE,
 FILENAME TYPE STRING,
 RC TYPE I.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
 WINDOW_TITLE = 'Open File'
 DEFAULT_EXTENSION =
 DEFAULT_FILENAME =
 FILE_FILTER =
 INITIAL_DIRECTORY =
 MULTISELECTION =
 WITH_ENCODING =
CHANGING
 FILE_TABLE = FILE_TABLE
 RC = RC
 USER_ACTION =
 FILE_ENCODING =
EXCEPTIONS
 FILE_OPEN_DIALOG_FAILED = 1
 CNTL_ERROR = 2
 ERROR_NO_GUI = 3
 NOT_SUPPORTED_BY_GUI = 4
 others = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE FILE_TABLE INDEX 1 into fwa.
FILENAME = fwa-FILENAME.
 CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = filename
 FILETYPE = 'DAT'
 IMPORTING
 FILELENGTH =
 TABLES
 data_tab = itab
 EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 OTHERS = 6 .
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
Regards,
Balakumar.G
Reward Points if helpful.

Photoshop shut down while I drew a picture, now the file is broken and I can´t fix it, photshop won´t open the file and I have tried repearing it with different programs. What should I do?

Photoshop shut down while I drew a picture, now the file is broken and I can´t fix it, photshop won´t open the file and I have tried repearing it with different programs. What should I do? I spent 6 hours on the pic and I dont even have a screenshot or anything.

You don't even say what platform you are on, or any other details that may help others assist you.
If you are on a Mac, try opening your file in GraphicConverter (they have a demo version) if that doesn't open it, nothing will, in my experience.
I assume you have tried Adobe Illustrator already to recover.
You may also have a JPEG of your complete file (flattened) in Bridge Cache.
On the Mac you'd find it in your User ~Library (NOT the Root Library ):
Users > yourname > Library > Caches > Adobe > Bridge CS6 > Cache > 1024 > jpg(fileID)number Filename.psd.jpg
The user ~Library is hidden, but you can make it visible for an moment or two. Ask Apple if you don't know how.
I don't do Windows.

File-PI-RFC scenario with extraction of contents in the filename

Hi All,
I am working on File to RFC scenario.
Here the file name is like 'ABCD_XYZ_1234_DATE' where the date is in yyyymmdd format.
I have to read this filename & the date in the filename is to be mapped with one of the RFC parameter.
Also how would I trigger the Interface if the file resides in PI server or on local mchine.
How to configure the processing parameters in sender comm channel if I want to read the file after every 15 mins?
Thanks,
Amit Patil

Hi,
By writing simple UDF in your mapping you can Acheive this
Try this Once
DynamicConfiguration dynamicconfiguration = (DynamicConfiguration)param.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
String MyFileName = dynamicconfiguration.get(key);
String str[] = MyFileName.split("_");
return str1[1];
Map this to the date parameter(RFC) in the mapping .
If the file resides on Local machine then you can use FTP and if it is on PI server then NFS as Transport protocol.
If you want read the file for every 15 min there are 2 options
1) Set the poll interval time to 900 sec
2) Configure ATP in RWB
Configuring ATP in RWB :
http://www.dataxstream.com/2010/11/configuring-availability-time-planning-in-sap-pi/
Thank & Regards,
Deepthi

What are the connections to be done for file-to-RFC scenario in XI & R3 ?

Hi,
What are the connections to be done for file-to-RFC scenario in XI & R3 & also if it is RFC-to-File .
I need to know what type connections used for file-to-RFC in backend .
In SLD it should be Third Party or WEB AS ABAP..

Hi Nandan,
Perform the following configurations...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
Regards
San
Remember to set the thread to solved when you have received a solution there is a Way.

Advice on Binary File to RFC scenario

I need to send contents of a binary file into an RFC which can accept unbound rows of 1024 bytes of data.
I will also send filename to the RFC which I'll pull from ASMA.
I have a simple data type set up with XSD type base64Binary and string field for the file name. Initial try through integration engine is unsuccessful because I think PI wants to see the payload parsed as XML and it is the pure binary, unchanged by the file adapter. (e.g. "Content is not allowed in prolog")
I've found an example of how to do this via Java mapping, but I've never used that before. Is it required or is there a way to get this done with simple message mapping?

I used this helpful Wiki article to help me get this Java map going. Thanks for the help everyone.
http://wiki.sdn.sap.com/wiki/display/XI/HowtoSendBinaryDatatoRFCfromXI%28or%29PI
Also to get going with NWDS
http://techplay.plozzle.com/?p=21

Step by Step Guide Details for RFC to File and File to RFC scenario

Hi Guru's
Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
thanks in advance.
Regards
Raj

Hi Aaron,
I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
Edited by: Marshal on Oct 8, 2009 5:08 PM
I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
Edited by: Marshal on Oct 8, 2009 5:22 PM

Error while calling RFC adapter(FILE-XI-RFC scenario)

Hi,
I am trying for FILE-XI-RFC scenario. I am getting the following error. I have checked in message monitoring. The error is coming while calling the RFC adapter. Can any body tell what problem is this?
Regards,
Dhana
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.f23.sofd00001530a</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.u7a.us4296</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.f23.sofd00001530a</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi,
I did SLD check.
The status says 'Summary: Connection to SLD works correctly'.
But it fails while checking the access to XI profile.
Here is the status
Summary: Connection to SLD works correctly
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_DZ1
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
/ CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679#Transaction program not registere

File to RFC scenario with no BPM

I want to create File to RFC scenario with no BPM. I want to invoke RFC synchronously to verify that I'm getting correct response back, but i dont wanna process the response. So, In SXMB_MONI i can check the response back from RFC right? Or do I need to have BPM if want to see the response back from RFC?
What kind of business system i need to create for RFC? can i use same business system for both File and RFC? I'm using one Business System created on Third party technical system, which i'm using for file Input, also for RFC. Is that OK?
Thanks,
Deepesh

Hi,
I need to have BPM if want to see the response back from RFC? ... yes
The BPM will help you find the response very comfortable.
What kind of business system i need to create for RFC? can i use same business system for both File and RFC? I'm using one Business System created on Third party technical system, which i'm using for file Input, also for RFC. Is that OK? ..Yes you can .
Regards
Agasthuri Doss

Problem in file to rfc scenario without using BPM concept

hi ,
I have configured the file to rfc scenatio and in that i have created a synchronous message interface .i have even aaded modules to my sender adapter .
I have one sender aggrement , 2 receiver aggrement , 1 interface determination , and 1 receiver determination .
the problem that i am facing is that i am able to perform the operations on r3 side succesfully but i am not getting the response back in xi .
can any one pls help me in getting out of this problem .
with regards
Bhawarlal Choudhary

Hi Amit ,
My scenario is for creating the notification ( in plant maintenance) . every time i transmit a file a new notification nos is generated and even i am able to see it in SAP . in RWB when i check my communication channel i am not getting any response . The synchronous process seems to be working fine according to me do i need to even create a FRC communiation channel for sender as i have not done that .
with regards
Bhawarlal Choudhary

Problem in storing data in BAPI in File to RFC Scenario

Hi everyone,
I m doing File to RFC Scenario.......I completed design and configuration part and actived the Communication Channels.....
Now when I check in Runtime workbench I am getting succefully executed both at outbound and Inbound Channels.......but
data is not updated in BAPI...........
I m getting following error when I check in Component monitoring......
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: configuration exception caused by: com.sap.aii.af.rfc.core.config.RfcChannelInactiveException: channel has status inactive: com.sap.aii.af.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: configuration exception caused by: com.sap.aii.af.rfc.core.config.RfcChannelInactiveException: channel has status inactive
Please help me out.......
Regards,
Sudheer.

Hi
"I took Business Service as Service but not Business System.....Will it effect the scenario???......"
I suggest While dealing with the SAP Systems we should use Business systems.
Pls check the foolowing Threads for the above Query
RFC - Business Service
Re: business service for file to rfc
Regards
Abhijit

File to RFC Scenario - Not working with AAE

I have a File to RFC Scenario (calling RFC /POSDW/CREATE_TRANSACTIONS_EXT) using AAE but it is failing with following error in PI .
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>.
But When I run the same scenario using IE instead of AAE, it is successful from PI. So probably there is nothing wrong in RFC channel configuration.
There's an OSS note-730870 on this error ,it says the XML document sent to RFC Adapter may not be RFC-XML but as I am using AAE, payload generated after technical routing cannot be viewed.
Could you all please suggest why this error is coming and solution for the same?
Thanks,
Ankit

Hi Debashish,Monica,
Thanks for your help, I checked this SAP note its question 16 do describe my problem but do not provide solution and as I am using AAE it does not allows me to see the target structure generated whereas if I use IE the target structure generated is sucessfully getting posted.
Also, the functional module is present in target system. I have reimported the RFC also.
Is there some AAE related configuration required to enable AAE with RFC which could be missing?
This is what I get in log as the RFC reciever is called..
06.09.2011 14:15:31 Information MP: entering1
06.09.2011 14:15:31 Information MP: processing local module localejbs/RfcAFBean
06.09.2011 14:15:31 Error MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
06.09.2011 14:15:31 Error Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
06.09.2011 14:15:31 Error Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>.
Thanks,
Ankit

File-xi-rfc scenario

Hi all,
I am working on File-xi-RFC scenario.
i have done IR and ID working.
Now I have Done test cofiguration there is NO ERROR ......working
File is picked .....as mode is delete.......working..
I check in Adapter Monitoring...............there i got a ERROR. That is..........below
"- Error: 2006-12-16 15:59:57 IST: Message processed for interface MIIS_filetorfc: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was "
please help me...........
what i have to do??
Regards,
Umesh Laxkar

hi
wht i am suggesting u his...
Check whether UR RFC ie. SM59 t-code... its proterly working or not do test connections also actvate every thing ans see...
see the below link.. i hope it will be usefull...
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
regards,
vikram.c

Fixed Length of a field in the File-XI-RFC Scenario

Similar Messages

Maybe you are looking for