Flase alert in SQL MP 6.4.1.0

Hello,
I have a SCOM 2012 R2 env and SQL MP 6.4.1.0 imported. I am getting alerts from below monitors for SQL 2012 databses, though the monitors are disabled by default. I tried to enable the monitor but alert still stays.
DB Total Space
Transaction Log Free Space (%)
Run As Account is configured correctly.
Thank in advance for the help!
Thanks,
Binoy Das

You can reset the Health State for this object. If the alert still appears, it means your disk is going to run out of space. Check it again.
Juke Chou
TechNet Community Support

Similar Messages

Alerts in SQL SERVER 2000

Severity alerts from 19-25 and data and log file size alerts are not working on SQL SERVER 2000 SP3 Stnd Edn, any idea to fix this?

Can you tell us what you mean by "not working" ?
Don't you get notified or ?

How to show alerts in sql developer?

hi all
I want to display a message box in backend( sql developer). Every day open the sql developer, i want to see some mesage from table data. can u plz sample code of this requirement.
plz reply

SQL Developer is not a monitoring solution, which is generally what one is asking for when the word 'alerts' is used. Perhaps you need something along the lines of Oracle Enterprise Manager ?

Email alert if SQL Server Services stop abruptly

Hi,
I am a SQL Server DBA and I am currently working on setting up email alerts in case if SQL Server services stop abruptly.I have currently written a VB script which runs every 1 hr and checks if a SQL Server Service is running or not. This VB Script runs
with the help of Windows Task Scheduler.In case if a SQL Server service has stopped, this VB script immediately sends an email via. SMTP Server.
Please let me know if this is a good solution or is there any other better solution or is there any feature available in SQL/windows using which the same can be achieved.
Environment:
SQL 2008 R2
OS: Windows Server 2008
Thanks a lot in advance :)
Regards,
Tauhid S Shaikh

Hi Tauhid,
I do have same requirement, please could you share the code.
Regards
Siraj Ahmed

Creating an Appset Alert via sql or service

I am looking for a way for our IT department to send me an message / alert when an appset goes off line and comes back on line after scheduled over night processing finishes. Does anyone have any ideas on how to accomplish this? Whether it be through SQL Alert or Service Alert.

Hi,
This status of the Application set is stored in a SQL table indicating whether it is online or offline. You could create a trigger on the change of the value or have a service check this value and depending on that send out a mail.
Hope this helps.
Santosh

Oracle Alert and sql query

Hello, I am working on an oracle alert for PO's.
goal- when a PO is not approved/rejected by the approver and is waiting on approver's queue for more than 3 business days, an email should be sent to the approver every day saying "PO waiting for +xx+ days".
Working on R:12.1.1
Here is the script I could write and get emails of all unattended PO's. I am not able to use the dates.
Please help me out. Here is my script.
SELECT distinct poh.segment1,
TO_CHAR(SUM((pll.quantity - pll.quantity_cancelled) *
pll.price_override),
'$99999990.90'),
he.full_name,
NVL(fu1.email_address, '[email protected]') approver,
NVL(he.email_address, '[email protected]') owner,
pv.vendor_name,
vd.name
INTO &PO_NO,
&PO_AMT,
&CREATED_BY,
&APPROVER_EMAIL,
&CREATOR_EMAIL,
&VENDOR,
&DB_NAME
from wf_item_activity_statuses wias,
wf_notifications wfn,
po_headers_all poh,
po_line_locations_all pll,
fnd_user fu1,
fnd_user fu2,
hr_employees he,
ap_suppliers pv,
v$database vd
where wias.notification_id is not null
and wias.notification_id = wfn.group_id
AND poh.last_updated_by = fu2.user_id
and wfn.recipient_role = fu1.user_name
AND fu2.employee_id = he.employee_id
AND pll.po_header_id = poh.po_header_id
AND poh.vendor_id = pv.vendor_id
AND poh.type_lookup_code IN ('STANDARD', 'PLANNED')
and wfn.status = 'OPEN'
and wias.item_type = 'POAPPRV'
and wias.item_key = poh.wf_item_key
and poh.org_id = 81
AND poh.type_lookup_code IN ('STANDARD', 'PLANNED')
and poh.authorization_status IN ('IN PROCESS', 'PRE-APPROVED')
Thanks
Raj
Edited by: 936248 on Sep 20, 2012 7:15 AM

Hi Sree,
I tried this below script. This results in an error- APP-ALR-04106.
Thanks for the help.
SELECT distinct poh.segment1,
TO_CHAR(SUM((pll.quantity - pll.quantity_cancelled) *
pll.price_override),
'$99999990.90'),
he.full_name,
NVL(fu1.email_address, '[email protected]') approver,
NVL(he.email_address, '[email protected]') owner,
pv.vendor_name,
vd.name,
count(gd.transaction_date)
INTO &PO_NO,
&PO_AMT,
&CREATED_BY,
&APPROVER_EMAIL,
&CREATOR_EMAIL,
&VENDOR,
&DB_NAME,
&datediff
from wf_item_activity_statuses wias,
wf_notifications wfn,
po_headers_all poh,
po_line_locations_all pll,
fnd_user fu1,
fnd_user fu2,
hr_employees he,
ap_suppliers pv,
v$database vd,
GL_TRANSACTION_DATES gd
where wias.notification_id is not null
and wias.notification_id = wfn.group_id
AND poh.last_updated_by = fu2.user_id
and wfn.recipient_role = fu1.user_name
AND fu2.employee_id = he.employee_id
AND pll.po_header_id = poh.po_header_id
AND poh.vendor_id = pv.vendor_id
AND poh.type_lookup_code IN ('STANDARD', 'PLANNED')
and wfn.status = 'OPEN'
and wias.item_type = 'POAPPRV'
and wias.item_key = poh.wf_item_key
and poh.org_id = 81
AND poh.type_lookup_code IN ('STANDARD', 'PLANNED')
and poh.authorization_status IN ('IN PROCESS', 'PRE-APPROVED')
and gd.business_day_flag='Y'
and gd.transaction_date between (sysdate-3) and poh.submit_date
GROUP BY poh.segment1

How to set alert mail contain SQL text activities

How to set alert mail contain SQL text activities.
In "Notification Templates" topic have no Available Tags about sql text. Can I send mail alert with SQL text?

it should be text/plain, for a complete list refer
http://www.freeformatter.com/mime-types-list.html
Regards.

Run a PL/SQL statement in an Oracle Alert action?

Hello
did anyone know is it possible to run a PL/SQL statement in an Oracle Alert action?
I can run an SQL like “UPDATE Table SET alert_run = 'ok' where id = 10;” but if I run instead of this the following
“Select XXKN_TEST.UPDATE_XXX_TEST('&USER_NAME') From dual;”
I get the following error log:
Alert: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
ALECDC module: Check Periodic Alert
PL/SQL procedure successfully completed.
XXKN_TEST.UPDATE_XXX_TEST('GROSS2')
ERROR at line 2:
ORA-00904: "XXKN_TEST"."UPDATE_XXX_TEST": invalid identifier
APP-ALR-04020: Oracle Alert was unable to execute "&VALUE". Check that this file exists and that its read protection is set correctly.
Many thanks for your help,
Alois

Hello Suresh,
I tried your suggestion but it doesn't work.
The PL/SQL procedure was successfully completed but no data was modified.
Are you sure that running a PL/SQL is possible in an alert action?
Kind Regards,
Alois

INSERT Script stored as "SQL Statement Script" not firing on Oracle Alert

We are using Alert Manager to run Alerts based on absence information in EBS R12.1.3 HR tables.
Application: Human Resources
Period/Event: Periodic
Frequency: Every Day
The Alert has 2 actions.
One is to email a supervisor based on the Alert SQL finding staff who have had x number of absences over a set period of time.
That is working fine.
The other action is defined as an "SQL Statement Script".
The SQL script inserts the variables defined in the SQL from the main Alert definition SQL, into a custom table.
When the Alert fires, we are getting the email generated, but the INSERT statement isn't firing.
However, when we look at the result of the Alert when it has run, and look at the steps which were fired, we can see the email step and the SQL step. When we look at the SQL in the SQL step which was generated, we can copy and paste it direct into TOAD and it works fine.
We have tried a simple SQL INSERT statement which even just does:
INSERT INTO xx_tmp (VALUE1_DATE, VALUE2) VALUES (SYSDATE, 'this');
But even that does not work.
We wonder if the issue is that we cannot do a direct INSERT from an alert type of "SQL Statement Script"?
We have found another Alert which does a direct UPDATE on a table, but the SQL Statement Script definition has "Purchasing" as the Application, because it's updating a PO table.
In our case, we're trying to insert into a custom table held in our in-house XX schema.
Could the problem be that we don't have the "Application" set? If that's the case, we don't have a corresponding application anyway.
Or can we not do a direct INSERT like this - do we need to use a package instead, and call that?
Any advice much appreciated.
Thanks

Hi Brian,
Alert issue - Custom SQL fix
1. Define actions via "Actions" button on Alert Definition
2. Create an action for e.g. "Send Message to Supervisor"
   Action type: message
   Action - sends email to people
3. Create another action called e.g. "Insert Record"
   Action type: SQL Statement Script
   Fill in SQL in the "Text" section, no need to add a begin or end bit, just a simple INSERT INTO X etc ending with a semi colon
4. Back on the main alert definition window, go to "Action Sets" button
   Here, need one SEQ for the Message / Email (e.g. Seq 1), and then click on "Action Set Details" and click on "Members" tab and select the "Send Message to Supervisor" Action
   Then close the "Action Set Details" window, and return to the "Action Sets" window
   click into 2nd line, add e.g. Seq 2, and call it e.g. "Insert Record", click on "Action Set Details" > Members tab and select the "Insert Record" The problem was that in the first instance, we had a single Action Set, and under "Members" had selected the "Send Message to Supervisor" and "Insert Record" at the same time.
Short answer: each Action needs to be defined as a separate line in the Action Sets definition.
I can send screenshots if you need them, and don't mind putting your email address on this forum.
You can always edit the thread after I've emailed you, to remove your email address.

SQL alerts not being sent

I have set up an alert in SQL 2008 R2 to send an email if the tempdb encounters error 1105 (primary file group full) or 9002 (log full). I specified the database as "tempdb". Even though the condition is occurring, the alert is not being triggered
unless I change the database to "all databases". When it's set to "tempdb" the email is not sent, and the history tab shows 0 occurrences even though I can see them in the SQL Server Logs.
How to I get these alerts to work with the database set to "tempdb"?
TIA
Chuck

I see the error message in the error log showing "tempdb" as the DB who's primary file group filled.
Error: 1105, Severity: 17, State: 2.
Could not allocate space for object 'dbo.#mytable' in database 'tempdb' because the 'PRIMARY' filegroup is full.
I think I've also figured out whats happening. Whether or not the alert fires is based on the session's database context,
not the database who's primary file group filled. :( On a test server I ran the following...
-- prior to running this, I set tempdb's primary file
-- group to 10m and disabled autogrowth
use master
set nocount on
create table #mytable (x char(8000))
while 1 = 1
insert into #mytable values ('x')
If I set the alert's database to "tempdb" and run the code, the alert does not fire. If I set the alert's database to "master", it does fire.
This is not the behavior described in BOL :(.
Chuck

Periodic Alert-How to send all the records returned from the SQL in a mail?

Hello all,
I have defined a Periodic Alert, my SQL query returns more than one record whenever I run it. I also defined an action to send an email with the message consisting of the output variables from the SQL. Whenever i run this alert, a mail is being sent for every single record returned from the query. But i want to send a single mail containing all the records information that my SQL query returns.
For Example: My SQL query lists all the users created on current date.
Select User_Id, User_Name into &OUTPUT1, &OUTPUT2
from fnd_users where trunc(creation_date) = trunc(sysdate)
Now i want to send a mail with all the users information from the above query, to SYSADMIN. How can this be achieved?
Thanks & Regards
chakoo

Hi Chakoo,
If the Periodic Alert is not working as requried. You can write a simple package with 3 procedures to implement the writing output to a out file and simultaneuosly send email to multiple receiptents.
Example:
Create Package xx_pac
Create public Procedure P1
begin
Select User_Id, User_Name into &OUTPUT1, &OUTPUT2
from fnd_users where trunc(creation_date) = trunc(sysdate)
fnd_file.put_line (fnd_file.output, &OUTPUT1, &OUTPUT2);
end;
(Create private Procedure P2
begin
---Write the email package using the UTL_SMTP approch. Using this approch you can send the procedure P1 output file as an attachment to the desiginated receiptents.
end;
(Create public Procedure P3
begin
---call the procedure P1 using the "g_request_id = fnd_request.submit_request"
---Wait for the above procedure to complete using "l_conc_status := fnd_concurrent.wait_for_request" procedure.
---call the procedure P2. (When called you must provide the correct to, from address)
end;
end;
Register the Package xx_pac as a concurrent program and schedule when submit it from the request.
Regards
Arun Rathod

SCOM SQL MP 6.4.1.0 - Alert CPUUsagePercent2008DataSource.ps1

Hi Everyone,
Can anyone please help me with the following issue: Forced to terminate the following PowerShell script because it ran past the configured timeout 200 seconds. This alert is showing for the following script(s):
CPUUsagePercentDataSource.ps1
DBDiskLatencyDataSource.ps1
StolenServerMemory2012.ps1
SQLReCompilation.ps1
ActiveRequestsDataSource.ps1
ActiveConnectionsDataSource.ps1
CPUUsagePercent2012DataSource.ps1
ActiveSessionsDataSource.ps1
StolenServerMemory2008.ps1
CPUUsagePercent2008DataSource.ps1
I've read in the past that this issue is a bug in the "SQL MP 6.4.1.0". Is this jet fixed or? Thanks in advance for the help! :)

Hi,
Please go through the below similar thread for troubleshooting thoughts:
http://social.technet.microsoft.com/Forums/en-US/c539a55d-dd48-438f-b7d5-06ed2cecf6e9/powershell-script-failed-to-run-alerts-from-sql-management-pack-6410?forum=operationsmanagergeneral
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

What does _total for instance mean in SQL server log space used alert

Hi,
I would like to know the meaning of specifying _total for instance when creating log space used alert in SQL server 2008R2 server.
Thanks,
Preetha

Hi,
‘_total’ means performance condition alerts are available for all the database and it monitors all the existing databases.
Check out the following TechNet article for more information about
performance condition:
http://technet.microsoft.com/en-us/library/ms180982.aspx
Thanks.
Tracy Cai
TechNet Community Support

SCOM2012 Alert: SQL 2008 DB Average Wait Time & Recompilationis too high

WE have SCOM 2012sp1 CU3 updated.
I receive the below critical alerts from SQL servers continuously, please help me to resolve this issue.
SQL 2008 DB Average Wait Time is too high
SQL DB 2008 SQL Recompilation is too high

I don't know about anyone else but overriding those monitors and rules didn’t work for me, I had to override<o:p></o:p>
SQL Re-Compilation monitor for SQL 2012 DB Engine<o:p></o:p>
SQL Re-Compilation monitor for SQL 2008 DB Engine<o:p></o:p>
Average Wait Time monitor for SQL 2012 DB<o:p></o:p>
Average Wait Time monitor for SQL 2008 DB<o:p></o:p>
Now I am wondering if other monitors are valid as well in particular I have multiple alerts for<o:p></o:p>
Buffer Cache Hit Ratio monitor for SQL 2008 DB Engine is too low<o:p></o:p>
Page Life Expectancy (s) for 2008 DB Engine is too low<o:p></o:p>
is anyone else seeing these issues as well?

Some of the SQL Server 2012 are not getting monitored in SCOM 2012 SP1.( basics monitoring is happening, expect SQL role)

Found that all the SQL servers are getting monitored, expect few servers which are having SQL server 2012 role.
proxy is enabled for these servers, when I checked discovered inventory for SQL 2012 database unable to find these servers in that list.
and other servers having SQL Server 2012 monitoring properly issue is with only few servers.

Hi,
thanks for the all the input, we are using service account as windows account instead of action account !!
will that also affect discovery of SQL role?
and also found that there are many alerts in SCOM console, with alert description :
SQL Server cannot authenticate using Kerberos because the Service Principal Name
(SPN) is missing, misplaced, or duplicated.
please let me know how we can resolve this issue, will it affect SQL discovery as well ?

Flase alert in SQL MP 6.4.1.0

Similar Messages

Maybe you are looking for