Flash 8 publishing problems

Ok Im ready to tear my hair out so I'd appreciate any help I
can get.
I created an animation and imported it to my main file as a
movie clip. I created buttons to start and stop the animation
(these work but I wrote the commands in actionscript). I also
created a button to go to a website. This works when I test movie
but on the published file nothing happens when I click it. I did
this one using button behaviours. Could this be a mistake I made
when publishing or is there a way to do that command in
actionscript in case 'behaviours' is the problem?
I need to embed the file (once I get it working) in an
existing html file. I tried publishing it then cut and pasting the
html into my webpage file but all I got was a blank box. Flash help
wasn't really that helpful. Ive got Frontpage if its possible to
embed it using that...
Appreciate any help anyone can give
Bec

http://www.adobe.com/products/player_census/flashplayer/version_penetration.html

Similar Messages

CS4 Flash publish problems

I bring over a fla file (created in CS3 Flash) to use with
CS4 Flash. I work on the file and then go to publish and get an
error message saying to be sure the destination file is not locked
(it isn't) or the file name is too long (gileade1a is the name of
the file)
I am running CS4

Check out if your stage size is less than the movie clip size.

Getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep

getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep while deploying persistance with ejb sample application into cloud. can any one please tell me why i am getting this?

Hi Goutham,
I am facing the same issue. Please let me know how you have resolved it.

Adobe Flash Player Problem: "Movie Not Loaded"

new user to mac.
i'm getting more and more frustrated with this computer.
what's bugging me the most right now is
i am unable to view videos on certain websites.
rather than showing the content,
a white box appears.
when i right click on the white box,
it says "movie not loaded" (in gray) and adobe flash player 9 (in black).
i can't click on the gray line.
when i click on the black line, it brings me to the adobe website and tells me adobe flash player 9 has been successfully installed.
i am fairly sure this has nothing to do with heavy traffic.
any insights on how to resolve this issue?
cheers.

Adobe Flash Player Problem
http://www.adobeforums.com

Actionscript 2 and Flash Publish Settings

Hi Everyone,
I have posted a couple questions as of late and received fantastic support from other members (Thanks K-Glad).
I do have what I'm assuming to be a basic question however I cannot find an answer for it.
I added some login script to a page as listed below.
stop();
eval("$version");
appname="mikesapp"
loadVariablesNum("http://bars.bevinco.com/mike/newlogin.php", 0, "POST");
//This verifys the users status and forwards them to the portion of the website they are authorized to access. Frame 100 = Regional Access, Frame 200 = Franchise Access, Frame 300 = Employee Access and Frame 400 = Denied Access and Back Button
this.onEnterFrame = function () {
    if(_root.checklog == 100){
        _root.gotoAndStop(5);
    if(_root.checklog == 200){
        _root.gotoAndStop(10);
    if(_root.checklog == 300){
        _root.gotoAndStop(15);
    if(_root.checklog == 999){
        _root.gotoAndStop(20);
My Question
When testing this movie, I found that it was not moving to the section of the flash file that is relative to their "authorization level". I.E. I manually had my PHP echo back to flash, advising that REGIONAL ACCESS was used therefore it should be move this user to FRAME 5 of the file.
I found that it was staying stuck on the first frame and not moving beyond the 1st frame which I thought had something to do with the stop(); that is listed at the top of the actionscript.
However, when I changed the FLASH PUBLISH settings from Flash Player 8 to Flash Player 6, it works flawlessly.
I attempted to publish using Flash 7 however it appears FLASH 6 is as high as I can go without loosing it's functionality.
I'm curious WHY and will this limit our users from using the site if they have a lower version of Flash installed on their CPU?
I have attached the project FLA file and the PHP file, being used on the server to manually tell this file that a REGIONAL has signed in or someone with "100" level status.
As always, thanks in advance to anyone that has taken the time to read this post.
Cheers,
Mike

checklog is a string (even though it looks like a number to you). flash 6 allowed quite a bit more code sloppiness than later versions. so, it's very common for users to find publishing for fp6 works, while publishing for fp's higher breaks their code.
you should use:
this.onEnterFrame = function () {
    if(_root.checklog == "100"){
delete this.onEnterFrame
        _root.gotoAndStop(5);
    if(_root.checklog == "200"){
delete this.onEnterFrame
        _root.gotoAndStop(10);
    if(_root.checklog == "300"){
delete this.onEnterFrame
        _root.gotoAndStop(15);
    if(_root.checklog == "999"){
delete this.onEnterFrame
        _root.gotoAndStop(20);

Publishing Problems - a Solution?

For a long time I'd sympathised with all you people who'd been having publishing nightmares, even though I've been updating pretty much error free since iWeb 1.0
Then last night after updating my blogs and making a few changes, I finally got the dreaded error messages. Tried a few times, got frustrated, and decided to sleep on it.
Same this morning ... grrr ... but then I noticed that my iDisk had failed on auto-synchronisation.
I'd only mounted my iDisk recently to amend my Podcast feed, so on a hunch I unmounted iDisk, rehit the Publish button in iWeb, and holy shmoly – it worked straight off!
I reckon that publishing iWeb kicks off the iDisk auto-sync, and then you've got a conflict with iDisk and .Mac trying to outsync each other.
Anybody else found this? if this solves publishing problems for a few of you then great. If it works for a lot of you, even better. If the majority of you get sorted, then that's a revelation!
Dual 2.3 GHz PowerPC G5 Mac OS X (10.4.6)

My message to Apple stated:
"My pages go through the "create" process then start
on the "publishing" process then come back with an
error message that tells me to check my internet
connection (which is fine at 2 different locations. I
spent 13 hours fighting this yesterday. It has
created a major problem for me -- and this just after
I paid an extra hundred dollars to upgrade my
broadband. Your telephone people tell me you're
working on this. Please advise when it will be fixed
so I don't waste another 13 hours today."
Regards,
Richard M.
Richard, thank you for writing this. I would like to know how this all shakes out, and I am glad that it is an Apple server problem and not mine.
Meanwhile, I want to say how helpful it is to have this iWeb forum, and also thank the very generous and thoughtful souls who take the time to help beyond what normally would be expected. Those people know who they are, but I also am grateful to everyone.
For example, I was greatly relieved to read that I was not the only person getting Network Failure messages, since it meant that probably I was not working with a defective application -- one that started out fine but somehow went south on me and would not be replaced by Apple. This may seem a trifling thing to some, but when you are in a spot that you perceive as Hot, assurance from the outside is very much appreciated.
I hope that when you all finish your websites, you post the URL so we can all see it; after all, in a sense we are all comrades in arms (because sometimes it can seem like a war, due to the Fear Factor) and our fates are somehow connected even though we are all so-called strangers.
— Lorna in Southern California

Unexpected Publishing Problems

I have been using iWeb for almost two months with no publishing problems. I publish to a folder then ftp it to my yahoo server. However, last night I began to experience publishing problems. iWeb publishes just the first five pages of my site then I get a message that an unexpected error occurred. No other clues as to why it could be happening.
The last change I made was an adding a podcast. I deleted that podcast thinking that maybe iWeb didn't like the taste of it and tried to publish but it still won't work. I've tried about 10 times, with my screen saver turned off, battery charger plugged in, and no other apps running.
Please help me!
Ruben
G4 17 inch Powerbook Mac OS X (10.4.5)

Here's the latest...
I realized that iWeb stopped publishing at the same page (I have 30+ pages on my site. It would always stop at the fifth one). So, I rearranged the order of that page, dragging it down to the very bottom of my site list. When I went to publish to folder, iWeb published everything then stopped again at that specific page. So here I thought I had isolated the issue.
I created a new site and dragged the problematic page into it. I then created a brand new page in my main site and copy/pasted the old content into it. Ergo: a whole new page. I went to publish with iWeb cranking along nicely until it got to the NEW version of that page and then it crapped out. Again.
I am guessing that one of the images (or who knows what, really) is messing with iWeb's fragile ego. I am going to reconstruct the page with brand new copies of the images that were on it. Images, by the way, that published fine for almost a month and that I didn't alter at all.
Wish me luck all. I'll keep you posted.
Ruben

Strange flashing cursor problem

Hi,
I've just finished installing Vista 32bit on my Macbook Air (1.6) and its working fine apart from one small problem - when starting up it freezes on a black screen with a flashing cursor for 2-4 mins and then will start loading Vista fine. Once in there is no problem and its stable and what not. I have had a look at some on the articles on here and other forums and the flashing cursor problem usually refers to when people try to first install a MS OS and not once one has been installed successfully.
I only have to boot into Vista every now and then and only for a few minutes at a time so I usually spend as much time in Vista as it does loading.
Any help appreciated.

General purpose Mac troubleshooting guide:
Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems:
Isolating an issue by using another user account
Identifying resource hogs and other tips:
Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode":
Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems:
Apple Hardware Test
General Mac maintenance:
Tips to keep your Mac in top form
Direct you to the proper forum for MacBook :
MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
http://www.apple.com/support/macbookpro
Mac OS X Forum
https://discussions.apple.com/community/mac_os?view=discussions
This forum deals with a desktop/tower 65lb Mac Pro
http://www.apple.com/support/macpro
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
Recovery Mode
http://support.apple.com/kb/HT4718
Unless you did a clean install, and I can't tell what your system maintenance is whether it is what I would do. Backup / clone your system, use ML RECOVERY and erase the system partition and update with just Apple updates, don't restore anything.
Run Apple Hardware Test.
Take it in for a free check and diagnosis.

Flash player problem after updating to belle on my...

flash player problem after updating to belle on my nokia c7.when I try to play .flv videos screen goes blank as show in image,previously these videos runs fine on symbian anna plz help plz help or tell me the way to downgrade to anna
Attachments:
scr000002.jpg ‏10 KB

1) product code 059B7W0
2) software version 111.030.0609
3) it is actually stored .flv files on my phone workes fine on symbian anna
Attachments:
Scr000003.jpg ‏17 KB
Scr000004.jpg ‏15 KB

Publish Problems

More Publish Problems!
Ok... So now that I have been working on my sites when I publish I get "Publish Error" an unknown? Help... I am using iWeb 1.1.1 and thought that this word be an easy way for students to get access to some pod casts... Now what? This worked before using 1.1.1
Sometimes it works and most of the time it will not publish? What can I do?
Thanks
David
imac G5 and an older G5 + a Powerbook and an iBook Mac OS X (10.4.7)

Oh my god I am not a lunatic idiot after all!
I am currently in discussion with Apple Support for exactly the same problems as you guys, all I did was add a new video to my site. The first few times the update timed out as it was taking more than 30 minutes to upload (I am on broadband and the new page was only 7 meg). Then I got the ".Mac servers were busy please try later" message, then I got the "check your isp.." gubbins. Then when I tried again it said the update was successful but when I visited the site (via a number of different computers and networks) I either could not access the site at all, or it partly loaded, or the welcome page loaded correctly but when going to other pages I got nothing!
I am currently waiting for Apple Support to " get back to me"
MacBook 1.1 White 1.83ghz iBook 12 iBook 14 Mac OS X (10.4.7) Remember, A good friend will bail you out of jail, but a best friend will help you bury the body!

Pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

pixelation problems occurs in my videos when using adobe flash but using chromes pepper flash no problemes so its definitely adobe problems on my WIndows 8.1

Problem is:
Flash Player for IE11 (which is the worst browser ever developed - BAR NONE) is a Microsoft product, when it comes right down to it.
Adobe writes the base code and yes, they do collaborate on updates for it, but the gang in Redmond alter the plug-in and add "proprietary" code before embedding it, and at that point it's "their baby".
There are two (2) registry keys - 1 for 32 bit IE and the other for 64 bit IE, as well as a KB patch that prevent all but the most experienced Windows users from ever touching the Flash Player plug-in for IE. So there's NO WAY you could have done a clean install of the ActiveX plug-in in Windows 8. Unless you're an uber-geek, you can only update it through Windows Update.
WIn 8 is an abomination and IE11 made it worse. IE has always been the "problem child" of browsers, failing to handle CSS, Javascript, some PHP and most design "tweaks" that good webmasters can use with other browsers, trouble free.
I have IE8 on XP, 9 on VIsta, 11 on 7, 10 on 8 and 11 on 8.1... but they're all for testing only. I'd have to be out of my mind to ever think of using IE as my primary browser. ActiveX controls have to be disabled formost stuff and that opens millions of security holes in IE.
You've got a good video card and a decent sound card. It's a shame to waste them on a pile of garbage like IE, just because it came with Windows.

When did these flash player problems begin?

So, I had a computer running Win98 and IE6, which worked
great until Flash Player 8 autodownloaded about 4 months ago,
causing the beginning of an extreme headache. Several
communications with Adobe support (they eventually stopped
responding) over several weeks went nowhere None of the fixes
suggested by them, nor the ones here worked. Countless manhours led
me to think it was time to bite the bullet, buy a new computer. So,
as of two months ago I have a new computer running XP and IE6 with
SP2. I didn't know it until today, when I started having crashes,
but I have Flash Player 7.0.19.0. When i go to Adobe's Test page,
both Shockwave and Player windows show the animations (and no
crash).
On certain pages, which I believe have flash content, I get
the "IE has experienced a problem and must close" message. It
specifically mentions the flash.ocx file as the offender. It is
repeatable when visiting certain pages.
So, before I jump into the abyss of attempting to fix this, I
am wondering when these types of problems began. I have been using
Windows and IE since 1998 with no trouble until this year. I hoped
moving to a new computer would solve my Flash compatibility
problems. Could the root problem be new types of spyware, etc that
change something in the registry? Some of the fixes suggested by
Adobe were regarding keys changed in the registry. Unfortunately
those fixes didn't work (in Win98).
Finally, does anyone know if attempting to fix flash player
under XP is any easier than 98? Also, I will admit I may have
visited some sites recently that downloaded some adware, etc. Any
suggestions on cleaning that may solve the flash player problem? I
know this post is all over the map - I don't know where to begin...
Thanks in advance, Don

Hi
Which browser is giving you the error? Is it IE11?
Are you saying when you go to Adobe's website and download flash player it gives you an error?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Macbook air flash drive problem

my air mid 2012 has flash drive problem cant update and theres written apple would replace it free of charge but theres no official service center in my country what to do?Is it possible that they could send me flash drive or smthing like that

Apple Authorized Service Providers
https://locate.apple.com/country
Best.

[help] Flash cache problem?

Operating Environment: IIS6+ASP.Net 2.0+Flash
Framework / Procedure:
When running, Flash will run ASP.NET program. ASP.NET then
extracts data from the database and generates a XML file for Flash.
Flash reads the XML file and parse it into a readable format
for the users.
Problem:
When Flash displays the XML content and user leaves/exits the
webpage, this process creates a change in the database.
Then if this Flash function is executed again, ASP.NET
generates a new XML file, but Flash still displays the old XML
content.
We discovered that when IE's "Temorary Internet Files"
setting is set to AUTO, the above problem would occure, we suspect
this is related to IE cache.
Is there any way to resolve this Flash cache problem?

Did you try returning the XML via an ASP script?
In other words have the ASP generate an ASP wrapper that
returns XML.
Then if necessary, you can then add a random URL var to the
Flash XML load url variable. "theXMLWrapper.asx?x=" +
getTimer()

Flash banner problem

Hay I have put a flash Banner at the right side of my site [removed by moderator] its fine on Mozilla Firefox but i don't see it on Chrome and other browser including Safari.
I don't know why this is not showing. Help please.

Normally when Flash content does not appear in a web page it is due to improper embedding code in the html page. You should let Flash publish the html code for the file and copy/paste it into the html page.

Another user with publishing problems -- proof that it is .Mac related

Just before Christmas I started getting the dreaded "Publish Error: There was an error updating .Mac" message every time I published. I read all the previous posts, even the ones dating back to October. I think I can conclusively show that the problem is on the .Mac backend, and not at all on my computer. Here is what I did: first, I created a temporary .Mac account; second, I moved my Domain file for safe keeping and did not replace it; third, I logged into the Guest User account that is now available in Leopard. I then attempted to publish a single page website from iWeb from both my normal login and the guest login to both my normal .mac account and the temporary one. (To switch between .Mac accounts I used the system preferences panel when iWeb was not running). The results are as follows:
.......................Regular .Mac.......Temporary .Mac
Normal Login..Publish Failed......Publish Succeeded
Guest Login.....Publish Failed......Publish Succeeded
This tells me that there is no problem on my computer, or with my network connection, and the problem is squarely on the .Mac side of things.
I sent this message off to the standard help page, and got the standard form letter back. In reply I asked them to reset my .Mac account so it would appear "new". I'll see what they say.
It would be interesting to see how many other people with "publish" problems can repeat this test.
-=[doug]=-

I've done what appears to be the standard littany of things:
1) Confirmed that I am running the latest version of iWeb (2.02) on 10.5.1 (although the problem persists when using my backup of 10.4.10 that includes the ilife update)
2) Changed my .Mac password, even though it was less than 20 characters
3) Published all of my previous website to the temp .mac (in chunks to avoid the space limitations)
4) Successfully published my site to a folder
5) Successfully uploaded that folder to my iDisk
6) Attempted to republish and republish all multiple times
7) Deleted iWeb's plist
8) rebooted
9) logged out and back into my .Mac account
10) confirmed that there is no password protection on my site
11) confirmed that there are no comments on my site
12) deleted assets.[membername].plist from the Domain file
13) Confirmed that my password in Keychain is correct
14) Run Keychain First Aid
15) deleted Sites.RSS from my iDisk
16) deleted the website and index.html from the iDisk
So, I have done a fair amount of ground work here, and am not just spouting off against Apple/.Mac. However, I still claim that the fact that I can successfully publish to a temporary .Mac account while the exact same iWeb content fails when being published to my normal .Mac account implies that there is something wrong with my .Mac account -- it is almost as if Apple is trying to eliminate its paying customers (since there are no problems with the free account).
-=[doug]=-

Flash 8 publishing problems

Similar Messages

Maybe you are looking for