Flash animation on start-up screen

Using my w850i, I am able to assign a SWF to play on the
start-up screen (the screen following the SE logo and optional
flight mode screen). This is in addition to the stand-by screen
screensaver and wallpaper modes.
I configure this from the settings -> display -> start
up screen.
Is this a common feature on other SE phones supporting Flash
Lite screen savers/wallpapers? Please post your phone model if it
supports this.

My mobile Sony ericsson K770i supports this

Similar Messages

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

My iphone keeps flashing the apple start up screen

i've tried to update my iphone, but when it went to reboot it just flashes the apple start up screen over and over again! i've tried charging it and holding down the buttons but nothing is working. any suggestions?

Place your iPhone into recovery mode as described here. You may have to try to enter recovery mode more than once to succeed.
http://support.apple.com/kb/HT1808

Flash shuts down after start up screen - please help

I had a strange problem develop yesterday. Whenever I start
Flash 8 the start up screen shows for a moment, then disappears and
the program shuts down and never starts. I ran Ad-Aware, Spybot,
HijackThis and even did a file search by date to see if anything
appeared on my computer that would cause this but I found nothing.
I have Flash MX installed as well and it was doing the same thing
when I tried that. I repair/installed Flash 8 - didn't work, then
uninstalled Flash 8 and installed again and it's still doing the
same thing. I suppose I could uninstall MX too and try again but I
suspect that's not the problem. Any thoughts?

Your capacitors are leaking, this is a known issue with Rev A G5 iMacs, and they should be replaced, along with the logic board. Take it in and if t stays up long enough, try to clone it to an external drive to save your data. I use SuperDuper! to do this.
Let us know how you make out,

Flash Animation not lined up with screen

Hi,
I am a complete newbie to dreamweaver and will try to
explain. I have a flash animation that i can not get to be even on
the screen during runtime. I am guessing with all my screwing
around that i messed up the layout format or something. I read
somewhere that in dreamweaver, i can go to window >workspace
layout and then default. I do not have this default though.
So I think what I am after is a way to reset the layout?
Please help
Thanks in advance.

It's IE-only behaviour as a result of changes Microsoft made
several
years ago to their browser, regarding how Active Content
(Flash, Quicktime
etc)
is handled, after losing a high profile court case.
http://blog.deconcept.com/2005/12/15/internet-explorer-eolas-changes-and-the-flash-plugin/
Background:
http://en.wikipedia.org/wiki/Eolas
See also
http://www.adobe.com/devnet/activecontent/
If you're running Dreamweaver 8.0.2/CS3, the fix is already
built into DW's
interface.
If not, try
http://blog.deconcept.com/swfobject/
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ajb1131" <[email protected]> wrote in
message
news:fdu7tr$bru$[email protected]..
> When I am in runtime there is a box that says "click to
activate and use
> this
> control". I need to edit that so that it covers my whole
flash. I am
> also
> curious if there a way to have it default so the user
doesnt have to click
> it?
>
> Thanks
>

How to make a flash starter (to other flash animations)

What is the code I must use when I click on a button (goto1_btn), it loads another flash animation (1.swf) which has a back button (back_btn) to return at the starter? (gallery)
(Note: I'll use more than 30 btn on the starter → at the end: more than 30 swf in the folder)
Thanks

I won't be writing out all the code you will need for this since it can get fairly involved for what you describe wanting. As part of your learning you should also learn how to find coding solutions. Google and the Flash Help documentation are two of the best tools available for this. Search Google using "AS3 Loader tutorial" You might even want to try searching for "AS3 gallery tutorial"

Start-up screen flashes purple

The grey/white boot screen flashes purple at start-up. While it is a bit disconcerting this development does not seem to adversely affect the OS.
Has anyone found a means to have the OS return to normal start-up functioning?
Thanks in advance.

Try Reset PRAM.
Some of the display settings are stored in PRAM.
Reset PRAM: http://support.apple.com/kb/PH14222
Best.

Start-up screen flashing, apple,stop,?

what does 'start-up screen flashing, apple,stop,?' in Leopard iMacOSX 10.5.7, mean ???
How do we fix it ???,, computer had been working fine ....'safe mode' says
"mach_kernel' file won't open.../kernelcache_6a129E2A ..
david

Follow the steps after Safe Boot, at > Mac OS X: Gray screen appears during startup

To not reload from start flash animation on web page

Hi,
I've done a nice flash animation which is in fact an ad
banner.
This banner should be displayed on my customer website in
each pages.
However, in order to be sure that customers of my client will
see the
whole flash animation, i would like to be sure that it's not
reloaded
from the first frame.
is there something like a frames counter which can be
memorized by PHP
pages server ?
i mean on page welcome.php, my banner will be displayed.
let's say that after few seconds (35 frames for example), the
customer
click on a link "prices.php".
on this prices.php page my ad banner is once again displayed,
but i
would like to make sure it starts from frame 36 for example,
and not
from frame 1.
how can i do that ?
thanks a lot,
RAF

Ha! thanks certified. the DW experts are pointing at Motion or Episode. I have confirmed that the file won't loop right out of Episode, so that leaves DW off the hook, i think. But what to do?
Perhaps my workflow is flawed. I don't want to use Aftereffects to create web animations anymore. I want to use Motion. But this is a showstopper. .swfs are supposed to loop by default, so I can't imagine what's wrong. thanks for anymore advice.
coocoo

PowerBook G4 - Won't Start Up - 3 Strange Beeps then just LED flashes and sudden death - black screen.

PowerBook G4 - Won't Start Up - 3 Strange Beeps then just LED flashes and sudden death - black screen.
Prior that the powerbook also couldn't start but I could see the Apple logo, so via fire-wire (holding T at start up) I backed up the hard disk.
Check via DiskToolPro the structure, defragmented. Via DiskWarrior rebuild the directory
and finally not been able to access the drive I reformatted the drive via fire-wire drive.
Re-started the powerbook holding C to boot up from DVD - nothing
Re-started again and it give me one long beep and black screen. An indication that my 1gig RAM is bad or gone (?) and the DVD is stuck inside.
Bought new one 1 gig, installed it and now I'm getting only three beeps.
I tried all, changed the slots several times and nothing.
I tried more as:
                         c -- to boot from CD (again while the DVD is still inside and I cannot get it out)
                         cmd-opt-p-r -- to Zap the PRAM,
                         cmd-opt-n-v -- to clear NV RAM,
                         cmd-opt-o-f -- to boot into open firmware … and nothing. The DVD is in and I have
                                                black screen with three beeps and flashing LED.
Do I have to replace the Logic Board?   (Anyone has a spare one ?)
But it is the faulty Logic board?
Could anyone help me out? Please.
I'm retired and I cannot afford a new laptop - and this powerbook was a great, great horse for me until that horrible set of three beeps.
Thank you in advance for any advice and help.
Martin
THE SPECS OF MY POWERBOOK:
Model Family:
Powerbook G4 Aluminum
Processor:
1.67GHz G4 (PowerPC 7457B)
Manufacturer:
Motorola
# of CPUs:
1
Codename:
Apollo 7
Display:
Size:
15.2"
Finish:
Matte
Resolution:
1280x854
Backlight:
CCFL
Base Memory:
1gig PC2700 SODIMM
Brand:
Apple
Wireless:
802.11b/g
Color(s):
Aluminum
Original OS:
Mac OS X 10.6.3
Battery:
50-watt-hour removable lithium-ion battery
Graphics:
ATI Mobility Radeon 9700 (64MB)
Base Storage:
80GB 5400RPM EIDE 2.5"
Optical Drive:
8x Superdrive
Model Number:
A1106
Sales Number(s):
M9677LL/A
Machine Number(s):
PowerBook5,6
Dimensions:
13.7 in x 9.5 in x 1.1 in
Weight:
5.6 lb
Production:
Jan 31, 2005 - Oct 19, 2005
Factory:
China
Production Year:
2005
Production Week:
35 (September)
Production Number:
4240

But it is the faulty Logic board?
There was a known issue with LBs in 15-inch PowerBooks with 1.5 and 1.67Ghz processors in which one RAM slot would fail. There once was a repair extension program that fixed the problem at no cost, but it is long-expired.
The problem with seeking a used logic board for these models is that so many had their boards replaced that it increases the chances of the boards in the used/pulled markets having the same problem you have now. The replacement program also came close to exhausting the supply of new boards,
If it turns out to be a bad LB and you can't find a replacement, consider how used computer pricing works: A used computer is worth hugely more in parts than if bought as a working unit. I.E, you can probably find a working PowerBook that will cost less than the logic bard alone. It also possible to find a used MacBook Pro for less that a replacement LB.
If you tell us your approximate geographic location, we can see what's available nearby. I'm also retired, and and visiting my wife's family this week so have even more time than usual to help you search.
Regards,
Allan Jones

I start to open an app and it opens and starts to load then flashes back to the home screen this is doing it on all games but not the mail.

I start to open an app and it opens and starts to load then flashes back to the home screen (desk top)

Hello jerrysgirl777
For issues with apps closing on you at start up, try closing the app from multitasking, restarting your device, checking for updates or just deleting the app and downloading it again. Check out the article blow for more information.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/TS1702
Regards,
-Norm G.

Red screen appears when Flash animation plays inside Captivate

Has anyone experienced this problem? A Flash animation inserted into Captivate displays a red screen briefly when the animation plays. I've never had this happen before.
Ideas?

Hi there
Someone else recently reported the same behavior in the thread linked below:
Click here to view the thread
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Help starting off with Flash animations?

I just started to make flash animations using Adobe Flash CS4, but there's something I just don't understand.
To create an animated object, I know I have to create a new movie clip symbol, animate it, and then put it in the main scene. But when I drag the symbol from the library to the main scene, only the first frame of the animation is copied! How can I copy the entire animation of a movie clip symbol to the main scene?

If I'm correct, you say that I should press enter to play the animation, but pressing enter does nothing when I'm in the main scene (in fact, the Play command under the Control tab is greyed out). Right now I can see how my animation is going by going to Control -> Test Movie, but then it creates a swf file and then plays it, which means I can't play from a specific frame (right now my animation is small so it's ok, but having to go through all of it when it's longer will be problematic!). Anyway, thanks for the replies.

Has anyone else has seen this problem with their iPod touch 5th Generation with iOS 7.0.4. My screen started making flashing white lines across the screen, then went dim, then pixeled with purples

The ipod will show flashing white lines across the screen, going down, it then does somthing where the screen will dim down but its not like when the backlight goes on and its about to lock. It dims the background of your ipod and the icons and letters kind of all look defined. Then the ipod gets all pixelized and it has big boxes on pixels and its all differnt colors like purples and greens, red, etc. then it turns right off and restarts itself less than 5 seconds later. These things happen really fast but when it does it's really weird. It first happened 3 times in a row, Its still continuing to happen but i can manually turn off my ipod by holding the lock button down and not even 30 seconds later it's like its possessed and it turns on by itself. I talked to somone on appel and they told me to back it up and restore it. I restored it and as soon as the process ended and tuirned on like a brand new ipod and like clockwork the glitch happened instantly. It did it a couple of times throughout the night and i kept having to watch it so i can keep turning it off manually because it continues to turn on by itself. I talked to 3 different people on Apple Support and they couldnt even find an answer for me. It's so weird.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Also,
If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Embedded Flash Animation Won't Pause with Slide; Gray Screen on Resume

Hello,
We've added a Flash animation to a slide but when the we pause that slide, the animation keeps playing. Furthermore, when we resume, the whole movie goes gray.
Extra: this slide also has audio. We could add it to the animation, that's not a problem, but the animation needs to work first!
Thanks!

It was not the embedded animation that turned gray but the whole slide!
Since the original animation was from Captivate, we just copied the slides instead of trying to embed the swf. Our immediate needs are thus fulfilled. However, in the future, we will try the animation as a slide background if we need to do something similar.
(Unfortunately, I cannot share the animation because of corporate policy.)
Note: The question has not been answered but I marked it as answered because I no longer need an answer.

Flash animation on start-up screen

Similar Messages

Maybe you are looking for