Flash button problem! please help!

hello-
I haven't used flash to create a website for a while and I am feeling really lost. I have looked through countless forums and such and tried all sorts of things but nothing seems to be working. Basically- I have a set of 6 soon to be buttons and two movie clips. I want each of the buttons to trigger a certain part of both movie clips to play as well as going to a web page. There is also a little character at the bottom that I want to play part of a movie clip when clicked. (I'm sorry if this sounds really jumbled). I have figured out multiple ways so that when I click the little character it will play the clip-I placed the action to do this in the main timeline. However the action that plays this little movie clip plays it no matter what I click on. How do I make sure that only a certain thing I click on plays the action?
I'm not sure if I am placing the actions in the correct part of the timeline or what I am doing wrong. I am having trouble finding information on how to keep the actions separate.
I also want the first 10 or so frames of one of the movie clips to loop continuously except when another part of the clip plays.
each of the buttons is on a separate layer in the main timeline as are each of the movie clips.
if you think that you can help I can send the flash file.
I am very new to any action scripting- and appreciate the help!

A mouseDown event is a molouse related event, not an interactioon event with an object, so anytime you press down anywhere with the molouse it will trigger.
Give your buttons/movieclips iinstance names (via the properties panel), and then assign event handling functionaliuty to them. Let's say you name one of them "btn1"...
stop();
_root.frogdance.stop();
btn1.onRelease = function() {
_root.frogdance.play(4);

Similar Messages

Radio Button problem Please Help

I created radio button in the page
OAMessageRadioButtonBean radio = new OAMessageRadioButtonBean();
I dont want to show radio button sometimes, I couldnt find showradiobutton(false) method or enabledradiobutton(false) something like that how can I do this, Please Help....

Hi.
Use this code in Process Request:--
OAMessageRadioButtonBean mButton = (OAMessageRadioButtonBean)webBean.findChildRecursive("Id of RadioButton");
mButton.setRendered(false);
If you want to hide it depending upon some condition then use PPR.
Thanks
--Anil

Flash file problems please help :)

I was given a .FLA file and a .EXE version of the file.
The .FLA file will not let me publish it in any format not even .EXE
I had the web page link to the .EXE so that peopel could download it.
Now my boss wants the .FLA file to be viewable on the web and not download it like with the.EXE file
She also wants the file to automatically when the page is loaded.
I figured I would just publish the .FLA file to .SWF and have it autoplay on the internet.
The problem is that the .FLA file will let me edit it but it will not let me publish it in .SWF or any other settings.
I have found an EXE to SWF converter but the .SWF file created from the converter will not autoplay on the internet.
The .SWF file created from the .EXE to SWF converter will only play after you Right click and select Play.
What do you think I should do?
Thanks,
Travis

I can have the publish settings set to anything that I want.
The thing is that it will just not publish it at all, not in any format that I select.
When I click Publish, it will create a .swf icon on my desktop but it quickly dissappears as soon as it is done publishing.
I have reinstalled Flash.
I have renamed the .fla file and tried it all again.
I have created a new .fla file and copied and pasted all the layers.
None of these methods work. I would upload it here but the file is 150MB.
Here is the link, at the top "Click here to view demo" will take you to the .exe file.
http://www.stratamarkds.com/techniques_alive.html
If you want I think I can have it link to the .fla file.
Thanks for all your help thus far,
Travis

TS4436 Iphone 4 camera worked fine for 2 years then turned all flash photos red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Iphone 4 camera worked fine for 2 years then all photos with flash came out as red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

My iPad stop working suddenly i see black screen only pressing the home? and sleep button dose not solve the problem please help?

My iPad stop working suddenly i see black screen only pressing the home and sleep button dose not solve the problem please help ?

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Flash buttons problems when screen text set to medium in Windows 7

Anyone else have this problem that when
users have set windows 7 to Medium 125% screen size (not screen resolution), the clickable area on all buttons
in a flash menu/file are off. It's like the area to click for the button is not resized with the graphics and are no longer located over the button but stays where it is when screen size is set to 100%. With a more complicated menu, it makes it nearly impossible to click buttons at the bottom of the menu as the clickable area is located twoor more buttons up. It also seems to be happening with newer Flash files. On older versions it's not happening and the clickable area is scaled with the graphics in the Flash file. Please help!

See this:
[http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox]

Color don't work well in Mac book pro 13" and monitor flash sometimes? Please help me!

Color don't work well in Mac book pro 13" and monitor flash sometimes? Please help me!

Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
The many "failed" warnings that etrecheck sometimes spews mean nothing. Those warnings are not a reason to reinstall the OS, or to do anything else at all. They should be ignored.
The better your description of the problem, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

After a few minutes on safari it freezes everything i can't even force quit i have to shut off by holding the power button down please help me with this. thanks

everything freezes i can't even force quit i have to shut off by holding the power button down please help me with this. thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??

My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??

i plugged it and pressed the home button for a few seconds. the connect to itunes screen appeared and the moment i disconnect the cable from the electric plug, it switches off. when i connect the cable to the PC, nothing happens, its as if nothing has been done.

Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

My iphone 5 32 gb has an camera autofocus problem, please help me solve this

my iphone 5 32 gb has an camera autofocus problem, please help me solve this

Hi teejayfs,
Thanks for visiting Apple Support Communities.
If you've noticed unexpected behavior with your iPhone camera, start with these steps to isolate or resolve the issue:
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
You can find these steps here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
Jeremy

P6N Lots of problems please help

P6N Lots of problems please help
The setup is the following:
P4 D935 3.2gHz
P6N Diamond MS-7320 Bios 1.3V
Corsair XMS2-6400C4DHX
NX8600GT-TD512EZ/D2
Seagate Barracuda 7200 250Gb SataII 16Mb
Akasa 460W Dual Rail
Please help I have lots and lots of problems with lockups that can happen any time post , bios , loading vista and sometimes during OS. Some times will work ok play games etc. Already tried different combinations fitting the mem modules even tried and some pc4200 modules same problems. Spent lots of hours clocking the mems with different settings but non is stable. I am not interested in overcloking just to make it stable to start with. When is actually running is fine is more than enough for me. Already looked to lots of posts on the msi forum but… Since the cpu is old can I go back on an older bios version???? The Corsair modules have to run at 2.1V or is it possible to use them with slower setting. So confused so lost ….. please HELLPPPPP
Any help greatly appreciated.

please, don't buy any more unneded parts. first find the problem then buy if no solutions available.
One thing I find with BIOS issues is to do a full clear.
1. disconnect the power cord from the power supply(turn switch to off if there is one.
2. hit the power switch to clear the power out of the system.
3. set the cmos jumper to clear and leave there if one is available.
4. Pull the battery.
5. carefully short out the battery connector on the motherboard to drain any power left.
6. press the clear cmos button and hold for 30sec minimum, if you didn't have a jumper to set.
7. replace battery, move jumper back, plug in power cord, turn on power sipply switch.
Now it should hopefully power up. go into BIOS and load optimized results. hit save and exit and when it gets back to the post screen, go back into bios and set your normal MB settings(ie. set boot devices, boot order, disable sound if using sound card, etc...)
go into your H/W Monitor section and list the CPU Vcore settings to make sure it is getting the power it needs. I just looked it up and it's suppose to run from 1.225v - 1.325v.
also, try your most generic ram you have with auto settings. the faster the ram usually the more volts they need and default volts are 1.8v for ram and sometimes faster chips have issues with lower volts.
Let me know how this works for you.
-=Mark=-
ps. make sure everything is unplugged from the computer you don't need. just cpu, 1 stick of ram, and video. and of course keyboad and mouse. Please make a signature with all your systems specs including make and model numbers. I hate guessing at solutions and I'd hate to see you buy any more unneccessary parts because of lack of information.

I need to create Buttons dynamically Please Help

I am currently developing a card game. I represent my cards as buttons. But as the player draws more cards from the deck I have to generate buttons dynamically at run-time. I could use arrays of buttons and store new buttons inside that arrays of buttons. But the only problem is I need ActionListener for each of my buttons. How do you create ActionListener for each different dynamically created buttons? Please Help.

Here is my code. I just do not understand how to create those functions dynamically that functions different each time.
Here is my code please take a look.
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class run108{
JButton setbutton;
JButton ButtonUp;
JButton ButtonDeal;
JButton slot1;
JButton slot2;
JButton slot3;
JButton slot4;
JButton slot5;
JButton slot6;
JButton slot7;
cards[] card = new cards[55];
public static void main(String[] argv)
     run108 startgui = new run108();
     startgui.createframe();
void createframe()
     //Standard of way of creating Frame
     JFrame frame = new JFrame("108");
     frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     frame.setLocation(300,200);// Tells the startup position;
     //Adding Panels to the framework
     JPanel panelA = new JPanel();
     panelA.setBackground(Color.white);
     panelA.setLayout(new BoxLayout(panelA,BoxLayout.Y_AXIS));
     JPanel panelB = new JPanel();
     JPanel panelC = new JPanel();
     //Adding buttons with card images
     JLabel label1 = new JLabel("       Set of Cards");
     panelA.add(label1);
     ImageIcon pic1 = new ImageIcon("cards/backd.png");
     setbutton = new JButton(pic1);
    panelA.add(setbutton);
    ImageIcon picdeal = new ImageIcon("cards/deal.png");
     ButtonDeal = new JButton(picdeal);
     panelA.add(BorderLayout.CENTER, ButtonDeal);
    ButtonDeal.addActionListener(new DealListener());
     JLabel label2 = new JLabel("       Your Target");
     panelA.add(label2);
     ButtonUp = new JButton(pic1);
    panelA.add(BorderLayout.CENTER, ButtonUp);
    frame.add(BorderLayout.WEST,panelA);
    // Adds 7 initial card slots.
     ImageIcon pic2 = new ImageIcon("cards/backc.png");
     slot1 = new JButton(pic2);
    panelB.add(slot1);
    slot1.addActionListener(new Slot1Listener());
    slot2 = new JButton(pic2);
    panelB.add(slot2);
    slot2.addActionListener(new Slot2Listener());
     slot3 = new JButton(pic2);
    panelB.add(slot3);
    slot3.addActionListener(new Slot3Listener());
     slot4 = new JButton(pic2);
    panelB.add(slot4);
    slot4.addActionListener(new Slot4Listener());
     slot5 = new JButton(pic2);
    panelB.add(slot5);
    slot5.addActionListener(new Slot5Listener());
     slot6 = new JButton(pic2);
    panelB.add(slot6);
    slot6.addActionListener(new Slot6Listener());
     slot7 = new JButton(pic2);
    panelB.add(slot7);
    slot7.addActionListener(new Slot7Listener());
    frame.add(BorderLayout.CENTER,panelB);
    // This has to be added @ the end to show the components
    //that were added after on. If it is placed before the components
    //the components shall not appear since they sit on the frame
     frame.setSize(600,500);
     frame.setVisible(true);
class DealListener implements ActionListener
     public void actionPerformed(ActionEvent event){}
class Slot1Listener implements ActionListener
     public void actionPerformed(ActionEvent event){}
class Slot2Listener implements ActionListener
     public void actionPerformed(ActionEvent event){}
class Slot3Listener implements ActionListener
     public void actionPerformed(ActionEvent event){}
class Slot4Listener implements ActionListener
     public void actionPerformed(ActionEvent event){}
class Slot5Listener implements ActionListener
     public void actionPerformed(ActionEvent event){}
class Slot6Listener implements ActionListener
     public void actionPerformed(ActionEvent event){}
class Slot7Listener implements ActionListener
     public void actionPerformed(ActionEvent event){}
}

I preordered One Direction's new album Midnight Memories, but did not purchase it. It is not in my downloads or purchases even though it says it's purchased. I can't even buy it because it says purchased and will not let me click the button. Please help!

I preordered One Direction's new album Midnight Memories, but did not purchase it. It is not in my downloads or purchases even though it says it's purchased. I can't even buy it because it says purchased and will not let me click the button. Please help!

Try:
HT2519 Pre-ordered album, it says...: Apple Support Communities

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

Problem Please help me.....Let me know the area to look for it I am a DBA..

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION    CPIC (TCP/IP) on local host
ERROR       service 'sapmsPRD' unknown
TIME        Wed May 04 08:59:06 2005
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -3
MODULE      ninti.c
LINE        428
DETAIL      NiPServToNo
SYSTEM CALL getservbyname
COUNTER     1
   at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
   at SAP.Connector.SAPConnection.Open()
   at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
   at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
   System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
   System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
   SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.search.LoadRegionDetails()
   SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
   System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
   System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
   System.Web.UI.Page.RaiseChangedEvents() +115
   System.Web.UI.Page.ProcessRequestMain() +1099

The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C

Flash button problem! please help!

Similar Messages

Maybe you are looking for