Flash Chart Translation Issue

I have a region defined which is basically a pie chart based flash chart. The chart has 1 series for which I have defined a message saying 'You have no open tickets' when there is no data for the query. In english, when in fact there is no data, I see the message above which is correct. However, when I go through translating the app, and then log into french, I still see the english message appearing. I cannot find the message in my translation file at all, which tells me that it is not being picked up for translation. To me this is a bug, because it should be allowing me to translate this so that the above message will be in french for our french users. Anyone have any ideas on this?

Yes it is a bug I think. At least in 3.0, the version I am currently using. My application was in french and all the "no data found" were in the translation file. I made the correct translation in english. But whether I'm in french or english, the message is always in french, which is the primary language for the application. So i would think that it is a bug in 3.0. Don't know about 3.1 though

Similar Messages

Flash chart performance issue with multiple series

Hi,
We have a problem with the performace of a line graph which has multiple series.
I have set up an example application here:
http://apex.oracle.com/pls/apex/f?p=37504:1
The application contains two charts. The 'Mulltiple Series' chart has twelve series behind it and allows the user to include mutiple series data. The other chart has just one series.
The single series chart takes only a couple of seconds to render, however the mutiple series chart takes around 10 seconds even when no additional series have been selected. Using Firebug I have observed that the apex_util.flash procedure is taking around 8 seconds to generate the XML, and it includes null data values for the series that aren't selected.
My question is how can I make each series conditional, such that no data is included in the XML if the series returns no rows?
Thanks,
Andrew

Hi Andrew
Have you considered modifying your chart to use a series with the "Query source type" of "Function returning SQL Query"
Have a look at
Re: Flash chart - multiple series - no display when some series empty
My response on that thread may help. I'd be interested to know if this approach improves the performance.
Kind regards
Simon Gadd

Flash Chart 2d line issue

I am using a flash chart - 2d line.
The purpose of the chart is to show the percentage completed by the specified date. The percentage does not go up all the time. Some times it can go down also. We are capturing the comments if the percentage goes down.
The following is the query. When there is only one entry, the line goes across on the top of the bar chart. It does not reflect what I wanted. I wanted the chart to start at 0 and progress towards 100%
SELECT NULL LINK, date, Percentage FROM tableA where id=:id ORDER BY 2
Thanks in advance

Thank you Dimitri,
I tried specifying the colors myself, but that didn't helped.
What do you mean by putting the example online ... where?
In fact to see this bug is very simple: it is enough to create a page with a standard 2dPie Flash Chart (with legend), and add a chart series with following source (series query):
select null, rownum , mod(rownum,2) from all_objects
where rownum<10
Setting the Chart type to 2d pie or doughnut will have the mentioned problems, while the 3d pie not.
For the moment we don't want to buy AnyChart 5.
Regards,
Boris

Flash Charts issue, please help!

Hi everyone!
This this what is happening. The DBA just "modify" the apex (Application Express 3.1.0.00.32) images (I don't know why ¬_¬ ), after that all the entire apex and application stoped working at all. He "recovered" the images when I asked him if he changed something into the server, however, even when apex go backs to "normal" charts does not load any data anymore. What could the problem be?
Hope you could help me!
Thank you!
Fury
Edited by: FuryDev on Aug 30, 2010 8:39 AM
Edited by: FuryDev on Aug 30, 2010 8:55 AM

Thanks for your reply Jari
Apex version: 3.1.0.00.32
Data Base Version: 10.2.0.1.0
Aplication Server: 10.1.2.0.2
Apex full version was previously uncompress on the OAS server and it (apex) was deleted by mistake, images inlcuded. In order to fix this the DBA took the original apex.zip and then he "restore" the images from that file into the apex images folder. Everythings seems to work fine but flash charts, HTML charts works fine as well.
Hope you can help me!
PS: If you need some other info, just tell me.
Fury

Charts - translation

Hi!
Is there a way to add translation to a svg chart (ie have attributes like "chart title", "X axis title", "Y axis title" included in the automated translation process)?
It does not seem to work for me and there does not seem to be any documentation on it...
cheers,
Adam

Hello,
I just came across the same problem in Apex 3.2 with Flash Charts. Although this is not a big issue, it would be nice to have it corrected.
Thanks!
Pablo

Apex 4 - Flash Chart - How to open link in same page

Hi,
I need help in apex flash chart development. I want to open link in same page. Currently it open in new window with existing page intact
I have created a flash chart.
Below are setting
Chart Type 2D line
Series Type : Line
Series siurce : sql query
elect '?p=&APP_ID.:2:&APP_SESSION.::::P2_ORACLESID,P2_CAP_DATE:&P15_ORACLESID.,'||capture_date link,
capture_date,
round(sum(TOTAL_MB)) "Total_MB" ,
round(sum(USED_MB)) "Used_MB" ,
round(sum(FREE_MB)) "Free_MB"
from SST.TABLESPACE_USAGE_HIST
where DBNAME = :P15_ORACLESID
group by capture_date
order by capture_date
Problem: when I run this page, chart is displayed. Now if I click on the series value of chart, it opens page ( '?p=&APP_ID.:2:&APP_SESSION.::::P2_ORACLESID,P2_CAP_DATE:&P15_ORACLESID.,'||capture_date link) It opens page 2 in new window. I want it to open in same window. Am I missing something ? Is this possible ? Is there anything I can change to achive this functionality
Please help

Hi All,
I have an issue with Anychart link, can you please help me.
1. I have created HTML region in a page with
<div id="sampleClick">
<div id="sample1">
<script type="text/javascript" language="javascript">
function ChartSample()
var ChartSample = new AnyChart('/i/flashchart_v5/swf/AnyChart.swf');
ChartSample.width = "500";
ChartSample.height = "400";
var ChartData = new htmldb_Get(null,$x('pFlowId').value,
'APPLICATION_PROCESS=FINANCE_020',0);
gReturn = ChartData.get();
// prompt("xml",gReturn);
ChartSample.setData(gReturn);
ChartSample.write("sample1");
ChartSample();
</script>
2. Then created Application process with "On Demand Run this application process when requested by a page process." in PL/SQL Anonymous block
select 'f?p=&APP_ID.:136:&APP_SESSION.::::P33_ID:' || YEAR link,DECODE(period,1,'JAN',2,'FEB',3,'MAR',4,'APR',5,'MAY',6,'JUN',7,'JUL',8,'AUG',9,'SEP',10,'OCT',11,'NOV',12,'DEC')||'-'||year "MONTH",round(SUM(ytd_revenue)/1000000,2) YTD_REV from t_tc_qpcq2052
where cntry='IND' and category='20'
GROUP BY year, period
ORDER BY YEAR, period
I am able to see the chart, but I am not able to open or pass the value from one page to another page when I click the bar chart.
Can you please help me on this.
Thanks in Advance.

The flash chart Link not opening in oracle Apex 4.1

I have created a flash chart (Pie chart ) on the latest version 4.2.
Everything is workinfine when I have created a hidden item and associated a computation to it and added that in custom color option in chart attributes
I am able to customize this again in this version
But When I have done same thing in Apex 4.1
I am able to see the output .but When I try to change the color and click on chart attributes it throws an error showing no data found
Kindly help me in solving this error .

Hi,
To assist in resolving your issue, could you please outline the steps you've carried out in your 4.1 environment? Also, could you please confirm exactly what version of APEX you are referring to - 4.1.0 or 4.1.1?
Regards,
Hilary

Flash Chart Legend Not In Capitals

I have created a flash chart based upon a function returning sql. The chart displays fine but the legend column names for some reason are converted to initial capitals from all originally being in capitals, eg "SERIES" now equals "Series". I really need the legend to display all capitals as it is in the sql.
For example:
The function returns a string similar to this .......
select NULL as "LINK",
WEEK as "LABEL",
VALUE1 as "VALUE1,
VALUE2 as "VALUE2"
from MY_TABLE
order by WEEK
When the flash chart is rendered on the page the legend displays the two series values as "Value1" and "Value2". Somehow the chart ignores the capital case of the column names and applies initial capitals only over riding the original case.
There appears to be no over ride for the legend case so where is it coming from ? It shouldn't make any difference but the chart type is a "3D column" style. Not sure if this is a XML question or maybe a Flash Player issue.
Regards,
Jack.

I had the same problem.
To fix it:
1. Find a font that is strictly caps. I used Felix Titling.
2. Edit the flash chart & under the chart attributes set USe Custom XML to yes.
3. Scroll down almost to the bottom and find the legend tag.
4. In the font tag for the legend substitute the font you chose.
This will capitalize ALL the letters in the legend.
I don't know how to selectively capitalize letters.
Bob Richards

Error while creating the Flash Chart

Hi ,
While creating the Flash Chart i got the following error..
Error Item ID (4789301958029267) is not an item defined on the current page.
What does it mean????
My Chart Series is:
SELECT NULL LINK, DISTRIBUTOR, CLGASSETS, FOLIOS FROM (
select NULL Link, distributor,SUM(Clgassets) Clgassets,SUM(folios) FOLIOS from (
       select Month,distributor,
              clgassets,sales,red,trxns,folios,
              row_number() over(partition by SchType order by clgassets desc) rn,
              dense_rank() over(partition by SchType order by clgassets desc) den_rank
          from(
                Select Month,
                Scheme_type SchType,
                Broker Distributor,
                sum(CLGASSETS) CLGASSETS,
                sum(SALES) SALES,
                sum(RED) RED,
                sum(TRXNS) TRXNS,
                sum(FOLIOS) FOLIOS
      from TABLE
                MFDEX_TOPN_QUERY_PKG.TOPN_REPORT_QUERY
             'OWNPERF',
             :p_amc_code,
             'X',
             'X',
             :p6001_month,
             'X',
             'X',
             'X'
                ) op where instr(':'||:P6001_schtype||':',':'||scheme_type||':') > 0
               group by Month, Scheme_type,Broker
               order by CLGASSETS DESC)
         order by clgassets desc)
where den_rank<=5
GROUP BY DISTRIBUTOR
ORDER BY Clgassets DESC)
WHERE ROWNUM<=5Help me out to clear this error.
Cheers,
Shan.

Hi Sa'ad
Its been a little while since I used Web Analysis but I remember that there are issues if you have more than 1 dimension in rows or columns. What I cannot remember is whether it automatically shifts a dimension to the page or whether as you suggest it just doesn't display.
Pie charts can only display data from two dimensions (1 rows, 1 columns), you can filter using dimensions on pages. If that doesn't give you what you need then I'm afraid you need to stick to a different chart type.
Hope this helps
Stuart

Text in flash chart legend

Hi- We are on APEX v3.1.2.00.02
A flash chart has been created and works well, but here is my issue:
In the Chart Series query, we have a select (here's a small piece) select total_rfc "Total R.F.C"
When the chart is generated, the legend box appears as Total R.F.C (as seen in the above line).
I really want it to say Total RFC (no periods). If I change the SQL query to "Total RFC", it appears as Total Rfc (2nd & 3rd letters are lower case).
Anyone know how to fix this? I'm fairly new to APEX and I can't quite determine if this is a SQL or Flash issue.

Hi "msnewman",
The behaviour you are seeing is expected in APEX 3.1.2, and is due to the use of the Initcap function in the underlying logic, which is resulting in Legend values appearing with the initial letter in uppercase and the rest of the work in lowercase letters. When you remove the full stops from between R F and C, then the three letters are being picked up as one word, RFC, which will end up like Rfc after being updated by the Initcap function.
In APEX 4.0, however, this is no longer an issue. With Flash 5 charts it is possible to display the value all in uppercase, as you can see in the Bar Chart example here: http://apex.oracle.com/pls/apex/f?p=36648:5. So if you are contemplating upgrading to APEX 4.0.2, our latest release, you would be able to take advantage of this change to the behaviour of the chart legend, as well as much nicer looking Flash charts.
Regards,
Hilary

Dates in Flash Chart Bolded

I have a really frustrating issue with the formatting of my Flash charts. Whenever there is a date on an axis label it will bold all dates along the axis. It also seems to forget the formatting I want for the rest of the chart.
I have all of my charts to show the axis in 10pt Arial. Things work fine if there are no dates. The minute a date goes in the date axis is bold and the other axis is back to the default font and size. Any ideas?

Maybe this issue is a bug. I changed the rotation back to 0 and the text shows normal. Although, if this was going to happen I would have expected the same behavior with standard text.

Use flash charts from multiple base URLs

My APEX apps are hosted by a shared service provider who uses a front end proxy. Following the instructions in this forum, I was able to get flash charts to work by substituting my client URL for #HOST#.
Example, Change:
<embed src="#IMAGE_PREFIX#flashchart/
#CHART_TYPE#.swf?XMLFile=#HOST#apex_util.flash?p=&APP_ID.:5:&APP_SESSION.:FL
OW_FLASH_CHART_R#REGION_ID#"
to
<embed src="#IMAGE_PREFIX#flashchart/#CHART_TYPE#.swf?XMLFile=
http://mydomain.hostingcompany.com/pls/apex/apex_util.flash?p=&APP_ID.:5:&APP
_SESSION.:FLOW_FLASH_CHART_R#REGION_ID# "
I changed this base url in multiple locations in the chart source code and the charts now work.
THE PROBLEM
Users access the site via a public domain http://www.xyz.com. In order to get the charts to work I then need to change #HOST# to http://www.xyz.com/pls/apex. Then they no longer work when accessing via http://mydomain.hostingcompany.com/pls/apex.
Is there some way to get the charts to work irrespective of which path users take to get to the site?
ANOTHER PROBLEM
Though the above fix works for stand alone flash charts it does not work for the charts in interactive reports or the sample charts displayed when using the chart builder wizard in the application builder.
Is there somewhere to change in order to get the sample charts in the create chart wizard in application builder and/or the charts in interactive reports?

Hello,
Take a look at this thread -
Re: #HOST# variable at Flash chart region source
Which discusses the issue.
John.
http://jes.blogs.shellprompt.net
http://www.apex-evangelists.com

Flash Chart Disappear on refresh

I am using Apex 4.0.
When using flash charts it works fine until you use asynchronous update.
The chart just disappear .
When you refresh the page it is back but only until the asynchronous update.
I have the problem with the dial and line graphs.
It worked fine in the previuos release of apex.
I have tested it wiit IE8 and Mozilla Firefox
Any ideas ?

Hi Mike,
In response to your question:
Will this patch also fix a problem with multiple series scatter chart showing no data when some of the series return no data?
The patch that Dimitri has referred to only contains a fix for the APEX 4.0 asynchronous chart update issue with Flash 5 charts. This patch has also been incorporated into our 4.0.1 patch release. Can you please elaborate on the "problem with multiple series scatter chart" that you've referred to? If you could also provide a testcase on http://apex.oracle.com, I'd be happy to take a look.
Regards,
Hilary

Flash Chart Labels Overlap

Hello,
I have created the 3D Pie Flash Chart in APEX 3.2. The labels overlap each other where the pie slice is small. Is there a way for me to fix this issue?
Regards,
Kelly

Hi Anil,
I have seen similar behaviors in 2D Column Charts. What I have found is that most often, for me, the issue has been that the chart is not wide enough. This is not specifically an APEX issue but rather a Flash issue. When the chart exceeds the dimensions that you specify for the chart, the charting engine must squish some part of the chart. Most often, the labels are what get removed, in my experience.
There are options to investigate this. You can make the chart wider in APEX and see if the problem goes away. You could rotate your X-Axis text by 45 degrees or so to see if they all appear. I have also seen the labels appear when you use your browser to zoom feature. This is a Flash behavior as well. If you zoom your browser to 200%, you may see more of your labels.
Finally, it would appear from your sample data set, that you may not be getting stacked column. Is that the case? If you are getting a single column for each record in your data set, then you probably have 36 columns on your chart which is a lot. You will need to make the chart very wide in APEX and possibly rotate the labels.
If you need help with anything else, just ask.
Austin

Flash Chart Series : SQL Query Validation

Hello,
I probably found a bug on the SQL Query Validation for Flash Charts, if I have two subqueries, the validation fails:
SQL Query example:
SELECT NULL, a, b
FROM (SELECT c a, d b FROM
( SELECT 'first' c, 2 d FROM DUAL))
Error returned:
"Failed to parse SQL query:
ORA-06550: line 1, column 45: PLS-00428: an INTO clause is expected in this SELECT statement"
Is this problem known or is there just something that I do wrong ?
Christophe

Yes it was that problem, but I still have an issue:
How do I set the Flash Chart to use a PL/SQL function in the first place ?
When I try to enter:
"return package.function;" in the Create Region Wizard, I get the following error:
Failed to parse SQL query:
return EXPERT.getFullListSQLByNC
ORA-00900: invalid SQL statement
Certain queries can only be executed when running your application, if your query appears syntactically correct, you can save your query without validation (see options below query source).

Flash Chart Translation Issue

Similar Messages

Maybe you are looking for