Flash code into Dreamweaver - Help please!

I am using GoDaddy for my hosting account. It is on a linux
server. I have created an HTML page and loaded it up to the
internet using Dreamweaver, like I normally do. the page in
question is
http://www.desmoinesbilliards.com/gallery.html
When I use dreamweaver to insert the flash movie, it
transfers it as normal, but it will not show up on the website. The
flash movie works fine on the server, just cannot be seen on the
site. I called Go Daddy who said that there is a problem with the
way the code is calling up the Flash movie. I have not altered it
at all from the way that Dream weaver inserts it. The flash movie
is located in a folder on the site called 'flash'. The code is
below. I can't figure it out, any help would be appreciated. The
code that dreamweaver inserts is below. By the way, I use
Professional 8 version of both products.

Upload the scripts folder that DW places in your local site
when you insert
Flash on a page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"JesseDSM" <[email protected]> wrote in
message
news:[email protected]...
>I am using GoDaddy for my hosting account. It is on a
linux server. I
>have
> created an HTML page and loaded it up to the internet
using Dreamweaver,
> like I
> normally do. the page in question is
>
http://www.desmoinesbilliards.com/gallery.html
When I use dreamweaver to
> insert
> the flash movie, it transfers it as normal, but it will
not show up on the
> website. The flash movie works fine on the server, just
cannot be seen on
> the
> site. I called Go Daddy who said that there is a problem
with the way the
> code
> is calling up the Flash movie. I have not altered it at
all from the way
> that
> Dream weaver inserts it. The flash movie is located in a
folder on the
> site
> called 'flash'. The code is below. I can't figure it
out, any help would
> be
> appreciated. The code that dreamweaver inserts is below.
By the way, I
> use
> Professional 8 version of both products. <script
type='text/javascript'>
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=7,0,19,0','width','730','height','80','src','flash/leaguebanner','qualit
> y','high','pluginspage','
http://www.macromedia.com/go/getflashplayer','movie','f
> lash/leaguebanner' ); //end AC code
</script><noscript><object
> classid='clsid:D27CDB6E-AE6D-11cf-96B8-444553540000'
> codebase='
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=7,0,19,0' width='730' height='80'> <param
name='movie'
> value='flash/leaguebanner.swf' /> <param
name='quality' value='high'
> />
> <embed src='flash/leaguebanner.swf' quality='high'
> pluginspage='
http://www.macromedia.com/go/getflashplayer'
> type='application/x-shockwave-flash' width='730'
height='80'></embed>
> </object>
>
> <script type="text/javascript">
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=7,0,19,0','width','730','height','80','src','flash/leaguebanner','qualit
> y','high','pluginspage','
http://www.macromedia.com/go/getflashplayer','movie','f
> lash/leaguebanner' ); //end AC code
> </script><noscript><object
> classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=7,0,19,0" width="730" height="80">
> <param name="movie" value="flash/leaguebanner.swf"
/>
> <param name="quality" value="high" />
> <embed src="flash/leaguebanner.swf" quality="high"
> pluginspage="
http://www.macromedia.com/go/getflashplayer"
> type="application/x-shockwave-flash" width="730"
height="80"></embed>
> </object>
>

Similar Messages

  • Flash animation into dreamweaver

    hey everyone, i'm new at both flash and dreamweaver and currently have a project combining the two together and i really cant work it out (i'm even using html instead of css haha) :/
    Anyway, what i want to do is have a zipper (as in a zipper on ones clothes) on my main page and when someone puts their mouse over the zip, it zips down and reveals the text for that page.
    I have gone into photoshop and started editing a zipper at different stages of being pulled down, but am stuck as to how i'd
    a) link it together on flash/what type of file to save it as?
    b) put the actual code into dreamweaver
    c) have it actually working functionally to reveal my text underneath.
    thanks in advance for any help, i'd be very appreciative of anyone who could give me some advice

    You'll probably need to spend time learning how to create things in Flash--maybe try lynda.com.  Flash can be used for the animation and mouse interaction revealing text.  Once you are able to create the animation in Flash, you can have Flash publish both the swf file, which is what goes into the web page, and an html file.  You can copy the code from the Flash html file into the Dreamweaver file wherever you intend the Flash file to be inserted.

  • I have just upgraded to PSE 12 and Premier E 12, and tried to installed many times.  The pop up says "Configuration Error"; contact Adobe Tech Support(?); and "mention error code 1"!  Help please!

    I have just upgraded to PSE 12 and Premier E 12, and tried to installed many times.  The pop up says "Configuration Error"; contact Adobe Tech Support(?); and "mention error code 1"!  Help please!
    Install appeared to run okay up to,, and including "shared Technologies"....

    Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows

  • Can someone help me get my sql files into dreamweaver? (Please, my site up today)

    I need help getting my site into dreamweaver I have sql files and instructions from a past web designer I know. I just can't get it open because I am a nub. I am offering a shared screen to my computer though join.me https://join.me/784-748-841. My phone number is 361-523-9919.
    The screen share shows my computer screen and mine only. I will share mouse control and show you the files and my problem. I will type to you through word and you can type back.
    The web programer sent two files by zip called ikainica_woat.sql and localhost.sql in a folder call ikainica_woat, a program link to MAMP which I already installed and the following instructions:
    "http://www.siteground.com/tutorials/dreamweaver/dreamweaver_mysql.htm
    http://webdesign.about.com/od/dreamweaverhowtos/ss/dw_dynamic_site_2.htm
    Also a great tutorial
    This is one I use to connect to your database that is currently online.
    Make sure all of your files are opened in dreamweaver, meaning all of
    your index files and CSS files. I have included the CSS files in your
    FTP folder so you can load them on your local server and see the
    changes."
    I am just confused.  Please help this site is suppose to go up today.

    I need help getting my site into dreamweaver I have sql files and instructions from a past web designer I know. I just can't get it open because I am a nub. I am offering a shared screen to my computer though join.me https://join.me/784-748-841. My phone number is 361-523-9919.
    The screen share shows my computer screen and mine only. I will share mouse control and show you the files and my problem. I will type to you through word and you can type back.
    The web programer sent two files by zip called ikainica_woat.sql and localhost.sql in a folder call ikainica_woat, a program link to MAMP which I already installed and the following instructions:
    "http://www.siteground.com/tutorials/dreamweaver/dreamweaver_mysql.htm
    http://webdesign.about.com/od/dreamweaverhowtos/ss/dw_dynamic_site_2.htm
    Also a great tutorial
    This is one I use to connect to your database that is currently online.
    Make sure all of your files are opened in dreamweaver, meaning all of
    your index files and CSS files. I have included the CSS files in your
    FTP folder so you can load them on your local server and see the
    changes."
    I am just confused.  Please help this site is suppose to go up today.

  • Paste html code into dreamweaver 8

    I'm creating my 1st website in Dreamweaver 8, and am trying
    to include a photo gallery. I haven't got as far as learning Flash
    yet, but Ive found a piece of html code that will do what I want
    and am now trying to place it on my dreamweaver file. I don't know
    how to do this though, can anyone help please?
    Many thanks
    Nic

    i think maybe you have answered your own question in your
    title.
    simply copy the html code from where ever it is and paste it
    into your DW page. paste it in using the code view though not the
    design view in DW.
    if your not sure where abouts to paste it in the code view
    then just go to design view and with your mouse select with one
    click on the area of page that you want the gallery to go, for
    example in the right cell of your table. then go back to code view
    and you'll see that the curser will be in the right place - then
    paste!
    hope this helps
    zac

  • Can't Left Click in Flash Player Settings Panel - HELP PLEASE

    Hi and thanks for taking the time to read this. Believe me it is a fraction of the time I have wasted trying to resolve this issue.
    Basic problem is:
    I am trying to stream to Ustream but since downloading AFP11 for my Windows PC when I open the Flash Player Settings panel i can't left click on anything. It is set to deny but I can't click allow, or close or any of the icons.
    Right click does work.
    I have followed countless instructions in other forums from other posts that have encountered the problem on Mac and older versions of AFP but as yet none of the solutions have proven succesul.
    I have tried all of the following but nothing has resolved the problem.
    1. Uninstall and reinstall Adobe Flash Player (although this is impossible using Google Chrome) and restart computer.
    2. Unistall flash and install older version. (made no difference on Google Chrome and on IE8 had no flash whatsoever).
    5. Uninstall older AFP and reinstall AFP11.
    4. Uninstall Google Chrome and restart computer.
    5. Uninstall QuickTime (I got this off http://www.techsupportforum.com/forums/f10/flash-player-not-working-properly-please-help-1 61552.html) and restart computer
    6. Last resort use keyboard shortcuts such as tab, enter and ctrl+arrows. This either didn't highlight the panel at all or if it did I still couln't select allow, or close the panel itself so was no help either.
    So now I'm back to square one.
    Now here's a really bizarre thing... I am using a shared laptop computer and if I use my colleagues profile where she hasn't updated her AFP to Adobe Flash Player 11 the settings panel is responding just fine. IT'S THE SAME PC!
    I know I am alone with this problem but someone out there has an answer. If you can help please let me know how to fix this problem where I can't left click in the Adobe Flash Player settings panel.and I will be eternily grateful.
    many thanks
    nik

    OK the amount I hate myself right now is more than a fat guy's self loathing for raiding the fridge at 2am for Pizza but less than an armed robber who's accidentally shot a pregnant woman in the stomach during a shootout. but not much less.
    So after I had miraculously got the Flash Player Setting Panel to work again, (after deleting QuickTime and leaving the window open for abut an hour it just started working again) I then got enticed into downloading the ustream producer software.
    While downloading it informed me that it would only work with QuickTime.
    Stupidly and Optimistically hoping it would remove the need to use flash player altogether I downloaded and installed both.
    I then discovered to my horror that Ustream producer is not a patch on Vidbalster and that it was not capable of delivering the same level of broadcast.
    I then opened the flash player settings panel on ustream and... the problem has returned!
    This means I am 99% sure that QuickTime IS the cause of the problem so I have uninstalled QT off the PC. I have also uninstalled Ustream Producer.
    The thing is though, now no matter how many times I restart, or uninstall and reinstall Adobe, or Google Chrome, I am once again UNABLE TO LEFT CLICK IN THE FLASH PLAYER SETTINGS PANEL. AAAARRRRRGGGGHHHH!!!!
    What did I do? I fixed it and  f***ing broke it again!
    Now it properly will not come back to life! the problem is not solved and i urgently need help.
    Why does Adobe Flash Player Settings Panel and Apple QuickTime hate each other so much that they've got to ruin my life?
    Help forum PLEASE!
    Regards,
    nik

  • Bringing Flash functionality into Dreamweaver

    I created a navigation bar in Flash CS3 that expands to the
    stage width, but when I import the swf int Dreamweaver CS3 the bar
    displays at its fixed size and does not expand to fit the stage
    width for large screens,
    This is the Actionscript Flash code for the nav bar.
    Stage.scaleMode = "noScale";
    Stage.align = "TL";
    bar._width = Stage.width;
    dots2._x = Stage.width-200;
    menu_bar._x = (Stage.width/2);
    symmlog._x = (Stage.width/2);
    basebar._x = (Stage.width/2);
    stageListener = new Object ();
    stageListener.onResize = function(){
    Stage.align = "TL";
    bar._width = Stage.width;
    dots2._x = Stage.width-200;
    menu_bar._x = (Stage.width/2);
    symmlog._x = (Stage.width/2);
    basebar._x = (Stage.width/2);
    Stage.addListener( stageListener );
    When testing movie or playing it in Flash Player the bar
    itself stretches to fill stage width at any screen size, the
    buttons and logo center in the middle of the bar at any size. When
    I add the swf file to Dreamweaver, the size of the nav bar does not
    stretch to fill the stage width. Any suggestions

    Just to make sure -
    If you want to use Flash for navigation, consider this -
    1. Some people don't have Flash installed - what do they do?
    Especially
    consider those people who are browsing from a corporate
    internet where Flash
    is not allowed by the IT staff.
    2. Search engines may not parse Flash links - your site will
    not be
    spidered unless you have redundant HTML links
    3. Screen assistive devices don't parse Flash links - what
    will those users
    do?
    4. DW cannot maintain links within a Flash movie, so if you
    move or rename
    a linked file, your navigation will break - what will you do?
    You will have
    to remake those buttons.
    It's usually a very bad idea for these reasons - and for
    these reasons,
    Adobe has removed Flash buttons and Flash text from CS4.
    Sorry - I can't otherwise help you.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "GuyNice" <[email protected]> wrote in
    message
    news:[email protected]...
    >I created a navigation bar in Flash CS3 that expands to
    the stage width,
    >but
    > when I import the swf int Dreamweaver CS3 the bar
    displays at its fixed
    > size
    > and does not expand to fit the stage width for large
    screens,
    > This is the Actionscript Flash code for the nav bar.
    Stage.scaleMode =
    > "noScale";
    > Stage.align = "TL";
    > bar._width = Stage.width;
    > dots2._x = Stage.width-200;
    > menu_bar._x = (Stage.width/2);
    > symmlog._x = (Stage.width/2);
    > basebar._x = (Stage.width/2);
    > stageListener = new Object ();
    > stageListener.onResize = function(){
    >
    > Stage.align = "TL";
    > bar._width = Stage.width;
    > dots2._x = Stage.width-200;
    > menu_bar._x = (Stage.width/2);
    > symmlog._x = (Stage.width/2);
    > basebar._x = (Stage.width/2);
    > };
    > Stage.addListener( stageListener );
    >
    > When testing movie or playing it in Flash Player the bar
    itself stretches
    > to
    > fill stage width at any screen size, the buttons and
    logo center in the
    > middle
    > of the bar at any size. When I add the swf file to
    Dreamweaver, the size
    > of the
    > nav bar does not stretch to fill the stage width. Any
    suggestions
    >

  • Flash Catalyst into Dreamweaver to make Wordpress Theme??

    Is it possible to take your flash catalyst file into Dreamweaver and make it into a Wordpress Theme?

    No. Please read the Wordpress pages on how to create and modify themes. None of that has anything to do with just opening a file of whatever type in DW nor FC.
    Mylenium

  • Hp cq administrater/bios password my code is 57894901 help please

    hp cq administrater/bios password my code is 57894901 help please

    Please try this Password = 48792327
    Regards
    KNRK
    I work on behalf of HP

  • Need help embedding mailchimp subscription code into dreamweaver.

    so I created my page in edge animate, and then I brought it over to adobe dreamweaver, and I dont know where or how to place my embeded mailchimp code? 
    <!-- Begin MailChimp Signup Form -->
    <link href="//cdn-images.mailchimp.com/embedcode/slim-081711.css" rel="stylesheet" type="text/css">
    <style type="text/css">
              #mc_embed_signup{background:#fff; clear:left; font:14px Helvetica,Arial,sans-serif;  width:360px;}
              /* Add your own MailChimp form style overrides in your site stylesheet or in this style block.
                 We recommend moving this block and the preceding CSS link to the HEAD of your HTML file. */
    </style>
    <div id="mc_embed_signup">
    <form action="http://kandied.us3.list-manage.com/subscribe/post?u=4525b320bd81872705a48ea05&id=4743a970b 1" method="post" id="mc-embedded-subscribe-form" name="mc-embedded-subscribe-form" class="validate" target="_blank" novalidate>
              <input type="email" value="" name="EMAIL" class="email" id="mce-EMAIL" placeholder="email address" required>
        <!-- real people should not fill this in and expect good things - do not remove this or risk form bot signups-->
        <div style="position: absolute; left: -5000px;"><input type="text" name="b_4525b320bd81872705a48ea05_4743a970b1" value=""></div>
              <div class="clear"><input type="submit" value="Subscribe" name="subscribe" id="mc-embedded-subscribe" class="button"></div>
    </form>
    </div>
    <!--End mc_embed_signup-->
    I keep trying to add it to it, but I either get noting or just the subscription box. does this happen due to my edge animate project?

    Ben Thank you so much for your reply! It helped me read the code and made me understand it better. I decided to make my own subscription box by making a symbol "Subscription" and inside this i created two more symbols called "Textbox" and "Submittbutton". I tried putting in part of the code from above under the div id, but it kept creating the whole text box behind the symbols in dreamweaver. How would you suggest I embed the code from above into my created submission box below?
             <div id="Stage_Center2_Subscription">
                    <div id="Stage_Center2_Subscription_subscribe"></div>
                    <div id="Stage_Center2_Subscription_Submittbutton">
                        <div id="Stage_Center2_Subscription_Submittbutton_Submitbutton">
                            <div id="Stage_Center2_Subscription_Submittbutton_Submitbutton_RoundRect2"></div>
                        </div>
                        <div id="Stage_Center2_Subscription_Submittbutton_text">
                            <div id="Stage_Center2_Subscription_Submittbutton_text_Text">Join</div>
                        </div>
                    </div>
                    <div id="Stage_Center2_Subscription_Textbox">
                        <div id="Stage_Center2_Subscription_Textbox_textbox">
                            <div id="Stage_Center2_Subscription_Textbox_textbox_RoundRect"></div>
                        </div>
                    </div>
                </div>
            </div>
        </div>
    </body>
    </html>
    Thank you for taking the time to look at my question! I really appreciate it!
    Kyle

  • Exit Code: 7 on flash cs5 installation? help please??

    Hello i'm having a bit of a problem with re-installing flash cs5, i used to have it but i factory setted my laptop cuse it was acting up for a while and including flash was cting up and not loading so now i got to install it and it is giving problems it says:
    Exit Code: 7
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DS013, DW025 ... WARNING: DS013, DW025 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 62 error(s), 62 warning(s)
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
      Family: CoreTech
      ProductName: Adobe Player for Embedding x64
      MinVersion: 0.0.0.0
      This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
      Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
      Family: Shared Technology
    do you think you could help me please? thank you so much!

    Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
    Mylenium

  • Flash shell into Dreamweaver (CS3) HELP!

    Alright, I have been struggling with this for hours now. I
    have created a fully working site completely in Flash. I used a
    shell to access each of my different pages within Flash, everything
    works perfectly. Buttons navigate, rollover images appear, simple
    animations interact just fine. I inserted the shell.swf into a
    blank Dreamweaver file, saved it to my host (Mobile Me) as
    index.html and have domain forwarding set up for the site itself.
    When I type in the address: www.jenspaeth.com it opens up to
    the front page of the shell in the browser. It does not work past
    that though. The flash buttons highlight on rollover, but do not do
    anything.
    I am supposed to have this sit up and running today and can't
    figure out how to make it work. Any and all help would be greatly
    appreciated.

    TexasJen posted in macromedia.dreamweaver:
    > When I type in the address: www.jenspaeth.com it opens
    up to the
    > front page
    > of the shell in the browser. It does not work past that
    though.
    > The flash buttons highlight on rollover, but do not do
    anything.
    Getting a 404 error for
    http://www.jenspaeth.com/home.swf
    before I even
    bring a mouse over the screen.
    I'm guessing that
    http://www.jenspaeth.com/Jen
    Site/Shell.swf is
    attempting to load that file and cannot find it.
    Did you upload home.swf and any other relavent files to the
    root of
    www.jenspaeth.com? Or is it supposed to be in the "Jen Site"
    folder?
    You should not use spaces in folder/file names.
    Mark "404" Boyd
    Keep-On-Learnin' :)

  • Inserting a flash template into dreamweaver

    I have Macromedia Flash Pro 8 and I am using it to edit a
    flash template. When I put it in dreamweaver I can view it and it
    is fine, but when I try to put it on my remote server(my site) I
    cannot get it on there. Does anyone have a solution for this? May
    some key file that I need to be looking for?

    Thank you for helping me!
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
    Transitional//EN" "
    http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="
    http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html;
    charset=utf-8" />
    <title>Bridge Point Church</title>
    <script src="/Scripts/AC_RunActiveContent.js"..."
    type="text/javascript"></script>
    </head>
    <body>
    <script type="text/javascript">
    AC_FL_RunContent( 'codebase','
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','766','height','750','title','Bridge
    Point Church','src','mainV8','quality','high','pluginspage','
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movi e','mainV8'
    ); //end AC code
    </script>
    <noscript>
    <object
    classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
    width="766" height="750" title="Bridge Point Church">
    <param name="movie" value="mainV8.swf" />
    <param name="quality" value="high" />
    <embed src="mainV8.swf" quality="high" pluginspage="
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
    type="application/x-shockwave-flash" width="766"
    height="750"></embed>
    </object>
    </noscript>
    </body>
    </html>

  • Flash Manual Painter As2 Help please....

    Hi All, a Help on this will be really appreciated - need a
    logia something like to paint some Objects: simply put some MCs. When the Mcs (are out of the Box range) and neat its easy to colour.
    I dont see a place to attach files and I asking for help wronte to many forums no reply. I hope Adobe will answer to my question.
    Please see the Zip files attached: ManualPainter.zip
    http://www.actionscript.org/forums/showthread.php3?t=237849
    Please see: paint_Non_Overlaping_MC_Works.fla
    paint_Non_Overlaping_MC_Works.swf
    When the Movie clips are overlapping or one placed above the other MC
    the objects are hard to paint. It Recognizes the Obeject as One, the Imported png converted to a MC.
    Please see: paint_Overlaping_MC_Not_Works.fla
    paint_Overlaping_MC_Not_Works.swf
    Is there a possibility to make this work, like to make the MC Highlight on Mouse over and distinguish the objects when Overlapping? That's to say to colour the MCs when overlapping? What initially came to my mind is when mouse over the MC's to highlight so that we can drop the colour on it something like that.....I need some AS2 Code support.
    In the Zip file contains all the as2 codes. Your Solution on this will be highly appreciated please.
    Thank you.

    Okay, for anyone that is also having this problem I believe I figured out the problem. Adobe files are saved under .xpi extensions which is just another type of .zip file. If you do not have winzip installed you cannot install flash player. I now have mine working. Good luck!
    www.winzip.com

  • Centre flash animation into dreamweaver

    Hi All,
    I am a complete beginner with Dreamweaver, and having great
    problems fixing the size of a flash animation I'm playing as an
    intro. I have managed to get the animation in and it centred, but
    when I tested it on another computer I noticed it had stretched and
    for some reason it was possible to minimise the animation by using
    the + and - signs whilst in the browser window. How can I prevent
    this from happening, so no matter what machine you view from it
    keeps the size and position the same.
    Any advice will be much appreciated.

    You'll probably need to spend time learning how to create things in Flash--maybe try lynda.com.  Flash can be used for the animation and mouse interaction revealing text.  Once you are able to create the animation in Flash, you can have Flash publish both the swf file, which is what goes into the web page, and an html file.  You can copy the code from the Flash html file into the Dreamweaver file wherever you intend the Flash file to be inserted.

Maybe you are looking for