Flash looping second part of the animation ?

Hey.
I'm fairly new to Flash and I'm not familiar with it's functions.
The animation I made in Maya is in 2 parts. For The second part of the animation I want it to be looping. The first part no.
How can I make this.
Thank you

How is your animation currently arranged in Flash?  If it is purely a single timeline animation, then in the last frame of the second animation you would use actionscript:
gotoAndPlay(#);
where # is the frame number where the second animation begins.

Similar Messages

  • Why does the 'publish preview' screen in flash cs5 show part of the animation and then turns blank?

    Hi I am creating frame by frame animation in photoshop.
    I am importing the photoshop files into flash using
    FILE > IMPORT > IMPORT TO STAGE
    I used to be able to preview or "line test" my animation easily by clicking on:
    FILE > PUBLISH PREVIEW > FLASH
    I could watch the animation loop and see where improvements are needed. Now, flash struggles a lot with the files, takes a long time to load the preview, when it finally does, it shows me maybe a third of the animation, turns blank, and acts as if all my frames are completely blank. I cannot later see them on my main work surface either.
    Does anyone know what is going on? I keep restarting flash but the same problem persists.
    Thanks in advance for any help or suggestions

    Hi,
    Thanks, that might be it, I will look at re-sizing.
    I'm working in a very round-about way, of creating the frame by frame animation in photoshop, importing it to flash for preview, exporting from flash as png sequence into after effects where I continue animating.
    So I will look at exporting the png sequence straight from photoshop - let's see how this goes
    Thanks,
    W.

  • Hi, I have a refurbished upgraded macbook with 320 GB Disk, 4GB Memory and running Lion OS v 10.7.5.  This satisfies the second part of the requirement for installing OS X Mavericks (10.9) but happens to be an early 2008 piece.  Can I somehow install 10.9

    Hi, I have a refurbished upgraded macbook with 320 GB Disk, 4GB Memory and running Lion OS v 10.7.5.  This satisfies the second part of the requirement for installing OS X Mavericks (10.9) but happens to be an early 2008 piece.  Can I somehow install 10.9?  And why is apple not allowing people like me to try out this installation?  Any reason that are too technical that people like me cannot upgrade and handle?
    This would solve many apps to run on this.

    It's mainly the video card. The Models 2,1 through 4,1 have video cards with non-upgradeable 32bit drivers. The model 5,1 Late 2008 and newer have at least the NVIDIA GeForce 9400M with 64bit drivers. Mountain Lion and Mavericks require 64bit native drivers. Mountain Lion and Mavericks no longer support Intel's GMA 950 or GMA X3100 graphics processors.
    While Lion used some 32 bit and a lot of 64 bit code, Mountain Lion and Mavericks are pure 64 bit, which excludes more systems than Lion did. It's not something you can add memory to, for example, as it involves the base architecture.
    http://reviews.cnet.com/8301-13727_7-57470261-263/older-64-bit-macs-out-of-the-p icture-for-mountain-lion/?tag=mncol;txt
      http://reviews.cnet.com/8301-13727_7-57387846-263/will-your-mac-run-mountain-lio n/   

  • Anyway to loop specific parts of the timeline?

    Hey, is there anyway to loop SPECIFIC parts of the time line, the way you can in Motion, Logic and some other audio programs.  That would really be nice as you can make changes while you watch in REALTIME.
    Thanks

    I tried both.  First i simply used "A" Seclect tool to highlight the part of the timeline that I want to loop. That didn't work. The cursor just continued after the highlighted part. Then I sued "R" range slection tool and selected part of the clip/s in the timeline and again, the cursor just continued after the end of the selection.
    In logic and other programs, you can create a section on top of the timeline where you want the loop to be and it will loop from those points.
    Any other ideas of what to do?  Thanks again

  • Flash swf file in Dreamweaver, the animation does not show.

    I inserted a slideshow I created in flash into a html document I created in Dreamweaver and the animation doesn't show in the browser. I just get a blank space. Here's the site link
    http://webspace.westwood.edu/student/stephaniemays/grhd261/week7/boxmodel.html.

    publish an html file using flash and use that to display your slide show.

  • I have tried to download an audiobook that has Two parts.  The second part of the book downloaded.  But the First point did not.  I keep getting "Part 1 could not download at this time".  How can I get it to download?

    I have tried to download an audiobook that contains Two Parts.  The second part was successful in downloading.  However, the first part was not.  I keep getting "Part 1 could not download at this time".  I should have enough space for the download.  Any suggestions of what I can do?

    Answered in the other thread you posted in:
    i am trying to download new software and my mac keeps asking for the administrator name and password... i enter my apple…
    Please don't post in more than one place. It can lead to people wasting their time answering a question which has already been answered elsewhere.

  • Video in my flash presentation playing faster than the animation

    I have a flash presentaion that contains flvs, devided to chapters,everytime a video ends (chapter ends) a flash animation runs (like title changing,and thunmbnails changing).
    the prob i m having is that on a core2quad, animation is faster than videos,and on p4 video is slower than animation.
    the best played presentation is on core2duo.
    how can we solve this prob?
    thanx

    Try calling Apple - (1-800-MY-APPLE)
    and/or you can try the online service assistant-
    http://www.apple.com/support/serviceassistant/overview.html
    Message was edited by: belovedjs

  • Load only a part of the animation

    Sometimes flash websites are really big and it's not necessary to load everything at the beginning. For example, it sounds stupid to load every photos at the beginning because most of users will only see a few pics and the others won't want to wait minutes to load a website. So I'm wondering if it's possible in catalyst to load only the structure at the beginning and then load the rest when the user need it.

    For some reason, my problem is solved!
    When I set up my Apple TV, I updated the firmware, but a few hours later another update was available. And that did the trick!

  • I am a student, but will graduate in June if all goes well. Can I buy a year of CC now, even if I'm a student anymore during the second part of the membership?

    Question in title. Any help much appreciated.

    Yes, if you purchase a year subscription the subscription will last the entire year regardless of your status changing.

  • I am getting the following error message when i download CS6 Design Standard 'The message says" the file archive part of Adobe CS6 Design Standard is missing. you need all parts in the same folder in order to extract adobe CS6 Design Standard. Please down

    i am trying to download CS6 design standard. but it wont work. the second part of the download comes up with the following message "The message says" the file archive part of Adobe CS6 Design Standard is missing. you need all parts in the same folder in order to extract adobe CS6 Design Standard. Please download all parts."
    Does anyone know what to do?

    Do as it says: Put your downloaded 7z file and the *.exe in a proper folder, not just dump it onto your desktop or whatever.
    Mylenium

  • How can I use an iteration value from a "while" (or "for") loop as part of a filename?

    I am using the "Write To Measurement File" function  inside a while structure and would like to incorporate the iterative value from the while-loop as part of the file name. I'm not sure how to do it. Any suggestions?

    Like this:
    Edit: Oops. Sorry for the double answer.
    Message Edited by smercurio_fc on 05-22-2007 04:25 PM
    Attachments:
    Example_BD.png ‏3 KB

  • Targeting the EdgeID object from inside the animation

    I've been working on an animation that displays content pulled in from json files.  The height of the content pulled in is determined and then the Stage height is adjusted to fit the total content. This works well by itself. See http://www.jomariworks.com/edge-json (Only west coast links are live. Project files http://www.jomariworks.com/edge-json/edge-json.zip)
    Now I'm embedding the animation in a page using the oam insert feature, which creates an object with a fixed size.  When the animation adjusts the stage height, the object window size does not change. When the content is longer than the object window, the content scrolls.
    Is there a way I can target the height of the object (id is EdgeID) during the execution of the animation?
    The live version of this can be viewed at  http://reconnectingamerica.org/spacerace/index.php.  The project files at http://www.jomariworks.com/edge-json/edge-json.zip are the same as far as functionality goes.
    Thanks in advance for any help.

    After being unable to discover how to target the height of the object containing the embedded edge animation, I have gone back to having the entire page part of the animation file.
    The final web page is online at http://reconnectingamerica.org/spacerace
    There are big disadvantages of this:
    The full web page has more than 7000 lines of HTML.  Making changes in Edge Animate is a VERY slow process.
    Edge Animate corrupts the HTML in the file. This file contains complex TABLEs.  After making changes in Edge Animate and saving those changes, the TABLE headers are all corrupted (e.g. closing THEAD tags are moved above the head content and several closing TR tags are relocated. For the record, I checked.and the original HTML is syntactically valid.).  To deal with this I removed the tables when editing in Edge Animate and after making changes and publishing the Edge Animate version of the HTML I restored the tables.
    Working separately on the animation and then embedding is clearly the better workflow in this situation. Unfortunately, I needed to be able to resize the embedded animation's object container in the same way I was able to adjust the Stage from inside the animation.  Not being a jQuery wizard I couldn't figure out how to target the height of the animation's parent container.  Still interested in finding out how to do that if anyone can help.
    Message was edited by: jomariworks

  • HT201272 I have part of a song on my iphone, and the other part of the same song in my itunes purchased history, how can I fix this?

    I have the first part of a song on my iphone, the second part of the same song shows up in my "purchased" list in itunes store. It used to play the whole song on my phone, what happened and how can I fix this? thanks.

    Not if you sync your contact to itunes using the program provide i.e outlook..etc

  • Adobe Flash embeds will not be animated if they are completely hidden by another tab, window, or by scrolling down. If any part of the Flash is made visible, it will play again.

    Pretty much what's up there.
    If there's a Flash open, and I scroll down/open a window/open a new tab such that it is not visible anymore, it will not be animated. It freezes until any portion of it is visible again. This wasn't happening before a flash update, I believe.

    They will stay on the screen.  However, Process Monitor is only intended for advanced users.  It is recommended that users try to navigate to the troublesome registry key using regedit, and see if they can access it or not without an error.  This is far easier than trying to use Process Monitor, which is very complicated.
    I used Process Monitor to confirm that it was just that key which was causing the problem, and not others.  Process Monitor is not to be confused with the new Resource Monitor which is accessible via Task Manager in Windows 7 (and possibly Vista).  If you must experiment (and Process Monitor is very useful for diagnosing many deep-level problems if you know what you're looking for) Process Monitor can be downloaded from here:
    http://technet.microsoft.com/en-us/sysinternals/bb896645
    It replaces the older Sysinternals "FileMon" and "RegMon".  For those interested in the technical side, I had to setup a number of filters to be able to get the results display as in the screenshot.  First of all to just show Registry events.  Then to just show events from the manual Flash activeX installer executable.  The I added a filter to show only non-successfull results.  And finally, for the purposes of the screenshot, added a filter to just show those with "Access Denied", since other non-critical errors are also picked up due to missing keys because installation has not yet been fully completed I guess.   When experimenting, most of these filters were applied using the "is not" boolean logic, which will make sense if you experiment with the program.
    Without adding any filters, it picks up so many events (hundreds per second) that it's otherwise unusable.  e.g. 40,000 events within the first few seconds of opening the program. For this reason, I recommend simply using Regedit to diagnose the problem with the particular Flash registry key.

  • I can not loop part of my animation. Please Help.

    Hello for the past 4 hours I have been trying to loop part of my animation. I've gone through a few tutorials step by step, but I am not getting it to work. I need the animation to loop when it is completed back to the label named "looper". I have tried adding the action to the end of the timeline, I have also tried triggers, but they all do not work. Thank you for the help.
    Here is the link to the project. https://creative.adobe.com/share/ccb48fd8-9cd8-4de4-b6b5-e2cf8ac29150

    Your link does not seem to work.
    Did you apply the principles shown in the AE sample: Creating a Loop Counter?

Maybe you are looking for