Flash Media Admin Console cannot connect to server

Hello World
I just installed FMS Development version. It only connected
Twice after which i cannot cannot any longer to the server via
Admin Console.
Do any one have an idea what might have went wrong..
Mark

The username and password you entered when you installed the server are stored in the {RootInstallation}/conf/fms.ini file.
Let me know if that doesn't solve it.
Jody

Similar Messages

Login Problem Flash Media Admin Console

New to FMS, testing FMS Developers versions.
Connect and Live stream works fine using FMLE.
Problem is I'm not sure how to get logged into the Admin Console.
I'm not sure about what the "Server Name" is or the "Server Address". Is that just the IP address or the IP plus something else? How can I tell?
FMS install was done by tech at hosting company and he forwarded this info:
----------- Install Action Summary -----------
Installation directory = /opt/adobe/fms
Flash Media Server Port = 1935,80
Flash Media Admin Server Port = 1111
Apache Install = Yes
Administrative username = ******
Administrative password = ******
service owner = nobody
service user = nobody
service group = nobody
Run as daemon = Yes
Start Flash Media Server = Yes

LATEST UPDATE!!!
Just received this from the tech:
From what I understand, I think port 1111 is an internal communication port and not accessible from the outside..? From the main page, there is a console link which brings you to http://adobe.marunde-muscle.com/fms_adminConsole.htm and from there I think you have to define the parameters to begin managing the installation.
Does this mean anything? Is he/we on the right track?

Admin console cannot connect to Node Manager

I've just installed WLS 10.3.2, configured a domain (TEST), a machine (PHILO), a server (TEST1), and a node manager running on PHILO. I logged onto PHILO, ran "startNodeManager.sh", no problems, it says it's listening on 5556, like I configured. However, when I attempt to start the server TEST2 (associated with machine PHILO and in the domain TEST) from the admin gui I get the following error:
For server TEST1, the Node Manager associated with machine PHILO is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed.
If I log onto the local server where the admin node is running, I can telnet to PHILO 5556, so why can't the node manager be reached?

I have a similar problem trying to start my Managed server. I get the following error:
Unexpected response from server: § ☻ ☻☻F
weblogic.management.scripting.ScriptException: Error occured while performing st
art : Server with name geo-apps failed to be started
at weblogic.management.scripting.ExceptionHandler.handleException(Except
ionHandler.java:48)
at weblogic.management.scripting.LifeCycleHandler.startServer(LifeCycleH
andler.java:501)
at weblogic.management.scripting.WLScriptContext.start(WLScriptContext.j
ava:477)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx16.start$80(<iostream>:1270)
at org.python.pycode._pyx16.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx15.f$0(D:\product\Oracle\11.1.1\Middleware\user
projects\domains\basedomain\ServerStart.py:4)
at org.python.pycode._pyx15.call_function(D:\product\Oracle\11.1.1\Middl
eware\user_projects\domains\base_domain\ServerStart.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:131)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at weblogic.WLST.main(WLST.java:29)
Problem invoking WLST - Traceback (innermost last):
File "D:\product\Oracle\11.1.1\Middleware\user_projects\domains\base_domain\Se
rverStart.py", line 4, in ?
File "<iostream>", line 1280, in start
File "<iostream>", line 1744, in raiseWLSTException
WLSTException: Error occured while performing start : Error starting the server
: Error occured while performing start : Server with name geo-apps failed to be
started
Use dumpStack() to view the full stacktrace

FCS Not Updating from WSUS / Cannot open MOM Console / Cannot connect to MOM DB

Hi,
My original problem was that FCS was not updating from WSUS. Then after reading up, and trying a whole lot of different things I managed to break it further. Now I cannot open the Microsoft Forefront Client Security Console on the management server, The
Administrator Console and the Operator Console cannot connect to the Management server (They are on the management server)
As a side note: The reporting hasn't worked at all, not even after the last Systems Admin reloaded the whole FCS implementation.
I need assistance to get everything working again, and I think it might take a while to get everything resolved.
I don't know what information to provide so here is some to start with:
I believe this is a on server topology:
1. There is the management server, with all the roles except the "distribution" role installed.
2. The updates to FCS are set to go through our WSUS server.
3. The WSUS server works fine in all regards except to push the FCS updates through (I release other MS updates every week and they all go through)
4. Management server is 32-bit Windows Server 2008 Standard with SP1, with Microsoft Operations Manager 2005 (Unsure of SP1 is installed, but I think it is), and Microsoft SQL Server 2005 (It doesn't have the SQL Studio thing)
5. I have domain admin credentials
6. When opening the Microsoft Forefront Client Security console it crashes with a "MMC has detected an error in a snap-in and will unload it". Clicking on ok gives a new error page of exception: "System.Reflection.TargetInvocationException"
7. Opening the Operator console give a message of "Error connecting to server" and clicking on ok brings up the console settings where you specify the MOM management server etc
8. Opening the Administrator conolse immediately brings up the "Connect to a different MOM Management Server" window.
I am hoping that someone here can ask the right questions and helped get through all these issues to get this system working again

Thanks Quan and Faron for your replies. Firstly, when I logged into the server today and tried to open the consoles, the FCS console did not give me an error. Before I originally posted my message I already downloaded and tried that hotfix. The problem is
there is no SQL Management Studio. Microsoft SQL Server 2005 is installed.
The only error that really stands out is this one under the application logs:
Source: Microsoft Operations Manager
Event ID: 20607
The Data Access Server (DAS) on computer SSCIS04 returned an error. System error code: -2147217770 System error text: IDispatch error #3222 DAS method called: ConfigurationGetOnePointFreeSpace Called from file: d:\bt\4\private\product\core\engine\managers\perfcountermanager\src\momperfcountermanager.cpp
Called from line: 984 Other than that there are some terminal server printer errors and print spooler errors (which are common on pretty much all our servers), and Heartbeat errors (Event ID: 21213: Heartbeat update failed for 1 or fewer agents. Error details:
IDispatch error #3222)
I have just checked again and the FCS console is still opening without error. And I can start a scan. (No clients report back to the server though)

Flash media live encoder not connecting

I've installed flash media server to an external host..everything works fine..except when I try to replace the localhost with
my new domain name or ip address it does not work
eg rtmp://localhost/vod/mp4:sample1_500kbps.f4v - works fine
rtmp://lookandlisten.ca/vod/mp4:sample1_500kbps.f4v - does not work
rtmp://97.74.115.220/vod/mp4:sample1_500kbps.f4v - does not work
Also I cannot use Adobe Flash Media Live encoder to connect to the external server using any of the above it
only seems to connect to localhost and not the external server. I will be very glad with any help I can get
regarding this issue. Thanks
Al

if you dont like to turn off firewall settings, add 1935, 80 and 443 under exception. For this Choose firewire settings from Control Panel.

TimeMachine cannot connect to server popup on MBP when roaming.

Time machine has suddenly started popping up an error message saying that it cannot connect to server while off-network on my MBP. I use a timecapsule to wirelessly backup when I am home. At home, it connects fine, no messages, no errors. It just started doing this when I am away - previously it either silently ignored not being able to connect or made a local snapshot. Either would be fine over popping up the message (multiple times).
I've tried the following so far:
1. Re-install Lion, restore user, applications, settings from backup - did after an erase of MBP lcoal harddrive to get a full install.
2. sudo tmutil disablelocal; sudo tmutil enablelocal; sudo tmutil snapshot - all worked fine
3. repaired permissions on local hard drive.
4. verified time capsule.
5. Added timecapsule disk to privacy settings on spotlight
6. I do use dropbox - tried quiting out of it
7. Changed name of time capsule disk
Console messages:
4/15/12 8:48:44.073 PM com.apple.backupd: Attempting to mount network destination URL: afp://[email protected]/Study%20Time%20Cap
4/15/12 8:48:49.077 PM com.apple.backupd: NAConnectToServerSync failed with error: 64 for url: afp://[email protected]/Study%20Time%20Cap
Please help make the popup go away! All I want it to do is be silent when it can't connect.
Thanks

I THINK I may have tracked this down. I wiped my drive and did a clean install. Then I started installing applications back one by one, testing the time machine backup between each install. After each install I turned off the wireless interface and forced a time machine backup with "backup now." One of the first things I put back on was SOPHOS AV 8, and immediately I started seeing the problem. Wierd that Sophos could effect time machine that way, but now that I've looked on Sophos's support page, I found this:
http://openforum.sophos.com/t5/Sophos-Anti-Virus-for-Mac-Home/Time-Machine-compa tibility-error-when-time-capsule-is/m-p/6273
I've removed Sophos (something I don't love doing), and waiting until the next scheduled backup, but so far it's looking promising. If it doesn't work, I'll start over and load everything up again without Sophos and see how it goes.

NWORA_OPEN_BACKUP: Cannot connect to server

Hello all,
I getting such error while running Legato.
tried to run manually, result the same.
What can you advice to do?
what to check? in Oracle? in Legato?
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on t1 channel at 03/02/2007 08:28:01
ORA-19506: failed to create sequential file, name="df.[db_name].616148879.4180.1", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
nwora_open_backup: Cannot connect to server [server_name]

yes it worked almost for a year.
i have ran the script manually but the result is the same.
I have this:
starting full resync of recovery catalog
full resync complete
executing command: SET COMMAND ID
allocated channel: t1
channel t1: sid=17 devtype=SBT_TAPE
channel t1: NMO v4.0.0.0
sent command to channel: t1
executing command: SET MAX CORRUPT
Starting backup at 02-MAR-07
channel t1: starting full datafile backupset
channel t1: specifying datafile(s) in backupset
input datafile fno=00008 name=/oracle/[DISK_NAME]/[DB_NAME]/[DATAFILE_NAME]
input datafile fno=00007 name=/oracle/[DISK_NAME]/[DB_NAME]/[DATAFILE_NAME]
input datafile fno=00010 name=/oracle/[DISK_NAME]/[DB_NAME]/[DATAFILE_NAME]
input datafile fno=00001 name=/oracle/[DISK_NAME]/[DB_NAME]/[DATAFILE_NAME]
input datafile fno=00005 name=/oracle/[DISK_NAME]/[DB_NAME]/[DATAFILE_NAME]
input datafile fno=00009 name=/oracle/[DISK_NAME]/[DB_NAME]/[DATAFILE_NAME]
channel t1: starting piece 1 at 02-MAR-07
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on t1 channel at 03/02/2007 10:07:52
ORA-19506: failed to create sequential file, name="df.[DB_NAME].616154871.337.1", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
nwora_open_backup: Cannot connect to server [SRV_NAME]

O365 lync says cannot connect to server

I have O365 Premium business. When I downloaded Lync app from Windows store it says cannot connect to server.
help!

Hi shakingmyhead,
Please follow the guide to troubleshoot your problem.
For Admins:
https://support2.microsoft.com/common/survey.aspx?scid=sw;en;3695&showpage=1
For Users:
https://support2.microsoft.com/common/survey.aspx?scid=sw;en;3719&showpage=1
If you have any further question, you can also post a question on Office365 forum for assistance.
http://community.office365.com/en-us/f/166.aspx
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

PI 7.11: Cannot connect to server using message server:...

Hello Guys,
we make the Application Management for a Customer PI System.
Scenario:
- the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
- WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
Problem:
Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
"Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
In the Details from the Error Message:
"<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
Sorry for my bad English
Best Regards,
Markus

Hi Markus,
did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented. There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
(This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
Solution: Establish a connection without any proxy in between.
E.g.: a terminal server in the same network
It would be helpful to find more people with the same problem to force a fix from SAP for that.
If anyone else is having problems with this, please add a comment to this thread.
Best regards
Christian

MacBook Pro, iPad IV and iPhone 4S Cannot Connect to Server

I have a MacBook Pro running Mountain Lion 10.8.5, and an iPad IV, both less than three months old. I also have a pair of iPhone 4s's.
All of a sudden none of them can reliably connect to our AT&T Wireless home internet. There are particular websites we are blocked from viewing, notably any apple website, including apple.com, apple support, itunes, and App store, but also random ones like Wikipedia and others. We constantly get the "cannot connect to server" message. Yet other websites load right up with no problem.
Many websites are seriously snarled up, particularly Ebay, which is a critical one for me to have quick access to. Ebay screens are scrambled and out of order, act like purchases are being made when they're not, and photos don't show. All we get is little blue questionmarks.
Multiple PCs running on our home network work just fine, and we can get into any website with them. But ANY apple product is just stymied. We can turn off wifi on the phones, and get into websites with 3g, but as soon as the wife is turned back on, we're back to square one.
Nothing has changed on our network recently, although we did get a new router about three months ago after having consistent outages. I have noticed our wifi getting glitchier and slower as time goes by, but again, it affects the Apple products, until it just went totally haywire last week.
My husband gets wifi at work just fine, and I am accessing wifi quickly and accurately on the MBP at this very moment on a museum network.
The issue seems to be the AT&T home network, and very specifically with the full line of Apple products.
Any clean and easy suggestions? I don't want to have to jump through hoops on four different products, and I now suspect it's something to do with AT&T?

Pleeeeeeease. Somebody? Anybody?
I can't get into Facebook, or Ebay on my MacBook. Life is too short to weep and lose hair over computers. Surely there's a quick fix I just haven't thought of?

I recently updated to iOS 8.0 on my Ipad however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this?

Hi, I recently updated to iOS 8.0 on my Ipad mini however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this problem? Also i cannot download anything from the App store as a result of this.

Can you check the Object Security for the Analysis Menu and Export button and see if it is restricted?
Also, is this a Oracle DB? IF so, has the following 32 bit Oracle Client components been isntalled:
Oracle Objects for OLE
Oracle Data Provider for .NET
Oracle Providers for ASP.NET

Error message "cannot connect to server"

Often I get an error message "cannot connect to server" when
I want to connect to acrobat.com directly from a .pdf document in
order to upload it . Is it possible that there is some security
issue involved, e.g. that the document is protected somehow? Or
could browser or firewall settings be involved?

Hi Peterernst,
Thanks for posting.
Perhaps yes, firewall, and browser popup blockers have been
known to cause some behavioral, and connectivity issues within
Acrobat.com
Users have had success with allowing *.acrobat.com as a
trusted site locally, to see if that allows connectivity.
Also what browser, and OS are you using?
If still in the Unix environment, do you have access to a
Windows, or Mac environment?
Thanks!
Pete

HP ENVY 4500 Printer "Error. Cannot connect to Server"

Hey everybody,
I work in IT and have a client that recently purchased a HP Envy 4500 all-in-one. She called me to install it for her and I got it set up with no problems. After a few days she told me that her printer wouldn't scan. It was giving her this error message;
"Error. Cannot connect to Server. Check Server name and address."
She has this computer connected via USB and I have already reinstalled the driver and ran the HP Print and Scan Doctor with no success. I have tried a lot of other solutions that people have been posting with the same issue but none have worked. This has become a huge issue and I don't see HP trying to find a solution. If no soultion will fix this, then I will be returning this printer for her and getting something that works.
Any help would be greatly appreciated,
bbritt91

Hi bbritt91,
Welcome to the HP Support Forums. I understand that you are getting a connection error message when trying to use the scan to email feature of your Envy 4500 printer.
To be able to use the scan to email feature the printer must be setup with web services which requires the printer to be connected to your wireless network with an active internet connection. I have included the Getting Started with ePrint document for reference.
If the printer has been setup with a wireless connection, please set a manual IP address and manual DNS server for the printer. I have included a link to another post with the steps, including screen shots, on how to do this. Please don’t worry that the screen shots are for a Photosmart 7510, the steps are the same.
Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

"Cannot connect to server" error when setting up MAMP local server in Dreamweaver cc 2014

I am trying to set up my Wordpress 4.1 site with MAMP 3.0.7.3 in Dreamweaver cc 2014, but I am getting a "Cannot connect to server" error when trying to view the site live. The site works fine on the localhost:8888. I am using OS X Yosemite and PHP 5.6.2. Below are screenshots of my Dreamweaver settings. Thanks in advance.

Hi Subhadeep!
Think I'm getting closer (Lol). I did as you suggested and changed the web url to http://localhost:8888/Documents/projects/whoknew/. As you suggested I moved the local site to the Documents folder under the sub-folder projects. It is connecting to the server, but now I am getting the requested url cannot be found on the server. Below are screenshots of my current settings.
http://localhost:8888/Documents/projects/whoknew/. As you suggested I moved the local site to the Documents folder under the sub-folder projects. It is connecting to the server, but now I am getting the requested url cannot be found on the server. Below are screenshots of my current settings. Thank you!

I get the error messages: "Server not found" or "Cannot connect to Server" and thus cannot print. I don't even know what a server is.

Hello: I am not computer savvy.
I have run "Network Diagnostics" and the message "Cannot connect to Server" comes up. I can connect to the internet. I have tried turning off the whole system and the printer individually and nothing seems to change the message.

hello,
i got the same issue i'm using kde the link abe for "Adding a login manager (KDM, GDM, or XDM) to automatically boot on startup" guide is dead
arkham wrote:Have you tried the inittab approach for starting kdm? http://wiki.archlinux.org/index.php/Add … tab_Method
could you help me please ?
Thank you
Last edited by hael (2012-05-05 08:57:44)

Flash Media Admin Console cannot connect to server

Similar Messages

Maybe you are looking for