Flash Player and web page problems

I have just switched all my webpages over to an SHTML basis at my website (www.mgytypes.org) but am experiencing a problem with one page namely http://www.mgcars.org/mgccy/umlvideos.shtml.
The original page - http://www.mgcars.org/mgccy/umlvideos.htm - loads OK, ... but the new page http://www.mgcars.org/mgccy/umlvideos.shtml comes up with an error that if you press cancel on it continues OK but I want to avoid the error report!
This is related to the Flash Player embedded in the page in some way, but I cannot figure out what it is or how to remedy this.
Can one of you clever people out there help me figure this out please?
Thanks
Paul

You should place your swf in a CSS sized div container on the html page. If the scale width and height is set to 100% and it is not placed in a sized div, then there is nothing to contain the swf from trying to be the scale, or be the size of the page width (or height which ever it attains first).

Similar Messages

On 12/23/11 I update the adobe flash player and have had problems since- unexpected closing and freezing. Remove the adobe flash player and those problems resolved. How do I go back to the earlier version of adobe?

I was prompted by Firefox to update my adobe flash player on 12/23/11, which I did. Ever since then the web site has frozen and/or crashed. I run a internet business and can't have this continue. I uninstalled the flash player and the problems have stopped. I would like to reinstall the earlier version of adobe, since that didn't seem to impact the web site.
This is the flash player I installed on the 23rd - Flash Player 10.3 for Mac OS X 10.4-10.5 (Intel)

Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.<br />
See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
You can check the Adobe welcome and test page: http://www.adobe.com/software/flash/about/
You can use this manual download link:
*http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

Flash Player in web page hosted on Windows Azure

First, I admit I am a Flash noob. That said, I have an ASP.NET web page (ASPX) hosting a flash movie, and the page works perfectly on my development box but does NOT work when hosted on a Windows Azure web role. The initial image (PNG) displays, and the triangular "play" button is there, but when you click it the player rectangle goes all black.
I have verified that the files are in place. All the naming is correct. As mentioned, it DOES work locally.
This is an SWF file that loads an MP4 file and there's some xxx_config.xml file that provides subtitles to the narration in the video. I did not make the movie, but it was made in Camtasia Studio 7. It generated the core html object tags that I copied, and all the supporting files. As far as I can determine, the SWF file is failing to load the MP4 file.
In theory, this should NOT be a cross-domain issue as all the files are in the same folder of the same web site. I have tried adding a crossdomain.xml for good measure, but that had no effect. I also made sure to try using one single web server instance in Azure in case the load balancing between instances was causing the problem, but that had no effect.
I have a support call in to Microsoft, but of course they say they do not support Flash and I imagine Adobe will say they don't support Azure.
Anyone aware of any Azure-specific gotchas?
PS I am testing in the same IE9 browser from my local machine so browser settings are identical from the case that works.

I fixed it myself. It turned out to be an Azure issue, not a Flash issue. By default when an Azure web role instance is created (think VM), the IIS server is not configured with a MIME type for MP4 files. You have to add it to your project's web.config file if you're going to use that type of file.
IIS doesn't like to serve up file types that it doesn't know about.

Flash Player and .jsp website problems

Please Help! I can't view Flash Player objects on web pages
that use .jsp. I have the most recent version Flash Player, Windows
XP Home, IE 7, and Norton Internet Security & AntiVirus. I've
tried uninstalling Flash, my computer, turning off Norton, but
nothing works. I'm so confused now, I don't know what to do. I'd
like to start over if I could. (Some sites in particular are
mlb.com, delta.com and the Yahoo! GameChannel/ StatTracker).
Any help appreciated.

Sorry guys. I discovered that Safari / Preferences / Security tab I had the 'enable plug - ins' unchecked. I checked it and it solved the problem.
Hope it helps - took me a couple of days before I found it by chance (thrashing around!)

2 Desired Improvements for the Flash Player 'about' web page

Hi all ...   I'm finally writing to request two improvements to this web page:
     http://www.adobe.com/software/flash/about/
As a geek, I have long been annoyed that this web page does not keep its Flash object and does not show the Flash Player plugin version number in the same format as used in the detailed list of latest Flash Player versions for various web browers and operating systems.
This web page is mainly a tool for techs. It can be improved greatly with these two changes (which I'm requesting on May 29, 2013):
1) Near the top of the page, KEEP the flash animation object --
do NOT replace it with an advertisement in a few seconds.
     Keeping the Flash object there allows a knowledgeable user
to right-click on the object to see the Flash plugin version, which
is a way to confirm that the web page's displayed Flash Player
version is correct.
    Currently, the Flash object is replaced within a few seconds
with an advertisement for some other Adobe product. This is
MOST ANNOYING. As a tech, I'm specifically going to this web
page to (a) see that the Flash Player plugin I just installed is
working and/or (b) see what exact version it is.
    Again:   Keep the Flash object in place -- drop the code that
replaces that object with an advertisement.
2) The displayed Flash Player version is formatted with commas,
as in
                You have version
                11,7,700,202 installed
while ALL of the versions in the table below are formatted
(properly) with dots, as in
                Player version
                11.7.700.202
    Make it easier for us mere humans to compare these version
numbers ... rework the HTML code to replace the commas with
dots. (It's not rocket science.)
Thank you.
    -- A geek and former software build & release
        engineer in Tacoma WA

Thanks, Chris.    That other web page does serve my needs better. I've created a web link to it on my flash drive where I keep the latest Flash plugins for IE and non-IE web browsers.
I still feel that the "About" web page needs the two changes I suggested.
Thanks also for pointing out that the box displaying the version of the installed Flash plugin is actually a Flash .SWF object .... since it is currently static (meaning, it has no animation whatsoever), I had no clue it was a Flash object.
So, I add a 3rd request:   have that version-display SWF object redone, to have a simple animation added and to have its code to display version revised to use periods (dots) in the version numbers. If that object currently is intended and used in some other Adobe (European?) we page, create a new object for the English "About" page.   Or to re-use code, use the version-display object from the page at
      http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
on the "About" page as well.
Again, as a techie pressed for time, I want a web page where I see the current version of the installed plugins and the versions of the latest releases, in the same formatting,
along with an animated flash object to prove that the Flash plugin in that web browser is working.
I do not accept that the mostly-technical Flash "About" page needs to have marketing materials (an ad).   People go to the About page specifically to see the Flash version info and to prove that Flash is working.
Thanks again .... - Ray

WRT160N and web page problems

I have the WRT160N and experience problems with web pages loading. For example, when I use this router there are times when I want to go to Facebook and instead I get some odd MySpace webpage. I've had similar problems when trying to access my local news webpage, it loads some sort of other strange page. This occurs on all computers in my network (3).
I've tested this using a Netgear and a Belkin router, and have never experienced this problem. Only on the Linksys. The other routers I have are not N so I'd like to try and get to the bottom of this so I can use the linksys. I have the latest firmware loaded on it.
Any Ideas?

The issue I am experiencing has occurred on all three computers in my home. Two desktop computers and one laptap. They are clean from viruses and spyware, I can assure you of that.
I did try the suggestion of reseting the router, and then re-flashing the lastest firmware. Much to my dismay, this has not solved the problem. I have taken a screenshot to show you. If you look at the address bar, that is where I am trying to go, but you will see that it did not bring up that page. For some reason it took me to some Microsoft website this time around.
Any help with this would be greatly appreciated. I really want to get to the bottom of this.
** Edit ** I have noticed that if I go into CMD and run ipconfig /flushdns and close and re-open the browser the problem is corrected. I have used both DNS servers from my ISP and also from OPENDNS, with the same result. Maybe some sort of settings causing problems with the DNS?
Message Edited by Schwa83 on 02-24-2010 07:56 PM

Adobe flash player and mountain lion problems

I've just upgrded from Snow Leopard to Mountain Lion and now find that I'm getting messages (TVcatchup) asking for Adobe Flash player although I appear to have successfully installed version 11.3. In other sites I'm asked to install Java although I understood Mountain Lion to contain a Javea equivalent. Any clues out there please?

Sorry guys. I discovered that Safari / Preferences / Security tab I had the 'enable plug - ins' unchecked. I checked it and it solved the problem.
Hope it helps - took me a couple of days before I found it by chance (thrashing around!)

Flash player and x-plane problems...

When I play a game that is flash, it will work good for maybe 3-5 minutes, then it will skip really bad and completely slow my computer down and make stuff unresponsive. After I quit everything, my computer acts like nothing ever went wrong. One time i was playing a flash game and it started going really slow and then my screen went a little dark and it told me to restart my computer. mac os x had quit unexpectedly.. i have no idea what is going on.
x-plane has the same problem. it will run normal for one minute, then be really unresponsive for a minute.

BTW...when it comes to x-plane, I just want it to run, not run well...I know it's not a great vid card.
glxinfo output: http://pastebin.com/LXrA67jH
P.S. sorry, I know pastebin isn't recommended.
Last edited by Lehthanis (2013-12-21 23:07:31)

Search is slow and web page problem

the surfing is real slow even though i show full bars up top off of my new netgear wireless router.
and could someone please tell me how in the world do i stop my web page from disappearing to the top when i overshoot the pointer.
Mac is all new to me and i've managed to learn a lot but need help in some areas. i love the system, i just need to get use to it.

Have you blown the dust out of it lately?
How much free space is on the drive?
Open Activity Monitor, Show:>All Processes, sort on CPU%, see if anything using too much CPU% when this happens, click on Memory tab, do you have many Pageouts?
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Flash Banner On Web Page Problems

Hey everyone.
I'm not particularly skilled in Flash, but I usually know enough to get around (animate buttons and such). What I'm having a problem with is integrating a .swf banner I created into a specific place in a website main page.
The space that I want it to play in is 931 x 258 near the top of the screen. I want it to continuously loop, but ONLY play in that section on the main page. When I import the .swf, however, it's huge and does not conform to the space at all (even though the stage for the .swf was 931 x 238 so this wouldn't happen... go figure). Not only that, but you know how if you maximize the .swf you can see all your motion-tweened images and such on the edges and it looks terrible? Yeah, that happens too.
I'm at a complete loss. I tried looking at kirupa.com, but I did not understand the tutorial at all. How do I get the banner to play in a specific area?
Thank you all in advance!

You should place your swf in a CSS sized div container on the html page. If the scale width and height is set to 100% and it is not placed in a sized div, then there is nothing to contain the swf from trying to be the scale, or be the size of the page width (or height which ever it attains first).

HELP!Flash Player and ActiveX communication problem in IE!

I've made a ActiveX Control which use a Modeless Dialog to
hold a
ShockWaveFlash ActiveX control. Then we could use this
ActiveX control
as a bridge to communication with the Flash which was held in
the
ShoclWaveFlash Control.
The struct is as below:
External APP or Html <--> My own ActiveX Control
<--> ShockWaveFlash
Player playing .swf file
In Firefox or MFC APP, everything is OK, but in IE, IF we
load local
swf file and set always local trust, we can get FSCommand in
our own
ActiveX,
But if we load a swf file from HTTP use URL to locate it, We
cann't get
the FSCommand fired from flash in our own ActiveX.
It should be a security issue of Flash8, but I don't know
whether a
remote SWF file can communicate with local ActiveX in IE???
Please Help! Thanks!

Please see this FAQ:
ActiveX Filtering in Internet Explorer

New update and web page problems

After updating to new is on 3GS having problems bring up some webpages. I was able to view them with previous os.

Your wording is kinda crazy, but try this:
sync your iphone to your itunes, making sure to back up contacts, notes..etc.. then do a factory reset and install your iPhone as a new device, then back it up with the previous backup of the phone.

Ihave installed the latest Adobe flash player and youtube still tells me I need to install the latest adobe flash player. what is the problem?

I have installed the latest ersion of the Adobe flash player, and youtube still says I need to install the latest version of Adobe flash player in order to see the video. What's the problem?

You can check the version under Apple Menu > System Preferences > Flash Player. Did you quit and restart Safari after the install?

I installed the latest version of flash player and it said installed successfully and i can use it just fine, but when I checked system requirements it didnt seem to match. it needed 2.33 ghz and I have 2.13ghz. can this cause problems to my computer? i h

I installed the latest version of flash player and it said installed successfully and i can use it just fine, but when I checked system requirements it didnt seem to match. it needed 2.33 ghz and I have 2.13ghz. can this cause problems to my computer? i have an intel i3 proccessor, windows 7, internet explorer.

Since all Intel i3 processors have at least 2 cores, your specs are well above the requirements; see http://ark.intel.com/products/family/75025#@All
I have some computers with far slower processors, and Flash Player 14 works perfectly well on them too.

Setting OF LD_LIBRARY_PATH AND WEB CACHE PROBLEM [SHOWING PREVIOUS PAGE ]

Dear Members,
I would request for help regarding setting of LD_LIBRARY_PATH in Oracle 11G Application server and web cache problem when any single text file edit and save the result should not be changed . it shows previous page result.
*1. Where to set LD_LIBRARY_PATH in Oracle11g Application Server (10.3.0) ? [ like in 9ias we set in opmn.xml . ] Where is opmn.xml file in oracle11g or which files contained LD_LIBRARY_PATH?*
*2. When we created program generated report it shows correct result after some changes in file and generate again it shows first means previous page result as it is not take changes in that file. Even we tried out side made one .text file and open edit and save. It's given same result. So What is the problem regarding it?*
It is the matter of Browser Cache or WEB Cache. Where is the settings of it?
*3. How to connect database (oracle11g Release 2) through OCI driver?*
Regards
Vipul Patel

If you're compiling it yourself, you should set the library path then. If not, you can try something like this:
env DYLD_LIBRARY_PATH=$DYLD_LIBRARY_PATH:/path/to/add-on-libraries orca ...
but I'm not sure it will work.

Flash Player and web page problems

Similar Messages

Maybe you are looking for