Flat file data load failed with the below error

hi guys,
when the scheduling load(info package) from the flat file ,got below error..
Error 'The argument 'INR' cannot be interpreted as a number ' on assignment field /BI
thanks

Hi,
It seems that the flat file and data source are not in sync.... check your flat file format and prepare it in sync with your data source.
I guess you have an amount field followed by currency in your flat file, but in your data source currency field is not next to the amount KF or vice versa. It could also be that the KF you have defined is not of Amount type, and hence it doesn't expect the currency field.
Hope this helps
Godhuli

Similar Messages

Incremental load fails with the error LM_44127 Failed to prepare the task

Guys,
I have created a custom mapping and cretaed a execution plan for this mapping in the DAC. The full load completes successfully. But when ever the incremental lod is run , i am getting the below error and the task fails(The SDE load completes sucessfully , but the SIL load fails with the below error).
LM_44127 Failed to prepare the task
Please help!!!

i googled it..
http://datawarehouse.ittoolbox.com/groups/technical-functional/informatica-l/lm_44127-failed-to-prepare-task-when-running-workflow-in-informatica-86-on-aix-3199309
you can try for better links now.. !!

Data load failing with a short-dump

Hello All,
There is a data load failing with the following short-dump:
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_FOEV_ERROR_IN_FUNCTION
Full text:
"UNCAUGHT_EXCEPTION" CX_FOEV_ERROR_IN_FUNCTIONC
"CL_RSAR_FUNCTION==============CP" or "CL_RSAR_FUNCTION==============CM004"
"DATE_WEEK"
It seems as if it is failing in a function module - please advise.
Regards,
Keith Kibuuka

Did you read OSS [Note 872193 - Error in the formula compiler|https://service.sap.com/sap/support/notes/872193] or OSS [Note 855424 - Runtime error UNCAUGHT_EXCEPTION during upload|https://service.sap.com/sap/support/notes/855424]
Regards

Flat File Data Loads to BI 7.0

Hi Experts,
Please update me what is the best approach i have to follow for the below scenario of Flat File Data Loads
I will get data in Excel ....with Two worksheets....from the user
My requirment is to place the file in Central location avaliable to the user and BW to update if any changes necessary and want to load data(full0 to bw from file if there are any changes
Please update me how to deal with this scenarion of Two work sheets,In a central location...
Thanks

Easiest thing would be to use a DSO with change log to handle the changes to pass onto to any cubes and load a full every night
Then let the change log worry about any changes to the workbook
You have to be careful about the DSO keys though for this to work properly
Now to automate the loads - just how are you planning to create the infopackage as it will only read a csv and not the binary xls
Well it will read the binary xls if you maybe use a dbconnect with a jdbc driver to read the xls (that's on my next thing to do - but if you are as your user id suggests a "bw learner" then that may be a bit complicated)
The only other thign to do is to write a macro that automatically creates the csv file on the app server when the user quits the xls
Or off course you can just dump the csv each night - but then that is a manual task and in systems I design I hate manual tasks as staff go on holiday and peopel change jobs and it's not really very SoX compliant

Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.

Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
    + FullyQualifiedErrorId : JobFailure
    + PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/Henrik

Hi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

Job is failing with the following error- Error calling a method of the tree

dear SDNers,
my question is where do i need to look for error.
Will this be an ABAP issue?
Please guide
DETAILS
In SM37 when we see the job XYZ, we get the following details.
   Job                              Ln    Job CreatedB    Status          Start date     Start time      Duration(sec.)     Delay (sec.)
XYZ                                                                    Canceled        16.11.2009    10:11:30                  9                         27
When the job log is checked this , we get the below details.
The job XYZ is failing with the following error.
Date      Time     Class No.   Message
+----
+----
2009/11/16 05:03:01 | 00     516 | Job started
2009/11/16 05:03:01 | 00     550 | Step 001 started (program RBDMON00, variant
SBCI287, user ID ABCDEF)
2009/11/16 05:03:03 | TREE_C 000 | Error calling a method of the tree control
2009/11/16 05:03:03 | 00     518 | Job cancelled
Equest your assistance in knowing where to find the error for this.
I have no clue as to where and how i need to debug or where i should i be looking for error.
In BD87, the selection screen paramters that are given are changed on date (from and to) and IDOC status 51,66,69 and 64 and the message type is "Öutbound interface of picked shipments"
Please guide.
Regards,
SuryaD.
Edited by: SuryaD on Nov 23, 2009 5:36 PM
Edited by: SuryaD on Nov 23, 2009 11:14 PM

> 1. There is a job name ABCDEF
> 2. When this job is run then the status shows cancelled and the job error log shows tHe details that "error calling a method of the tree control"
> 3.ThIs error also points fingers to /link to BD87 as seen in the job log " (program RBDMON00, variant \SBCI287, user ID KRISF)"
>
BD87 is an IDOC processing.
> My question to you Sampath.
>
> in order to answer your question on whether it is ALv or SALV.. please tell me as to how will i know which progrm is associated with the job ABCDEF?
>
Go to sm37 - double click on the job that was failed - Click on Step (on application tool bar) to get the program name - double click on the program name - new popup will be opened - then copy the program and variant
Go to se38 - enter the program - execute (F8) - choose the variant that is there in the background job - run in forground first
if the run is good - then check the program - SE38 - Display the program then see
I just saw the above message BD87... .if that is true, you dont have to do all these
I dont think it is possible to schedule a job with BD87. Is this the first time or is any job completed without errors for this?

Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)

Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano Villanueva

Hi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva

Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentV

I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
to solve this problem.
Initialization Failed
The following error occurred while searching for the on-premises Exchange server:
[win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
$true -CurrentVersion 'Version 14.1 (Build 218.15)''.
Thanks Vivek
SharePoint Foundation 2010 Book
http://www.redpipit.com

Hi,
Please have a look at the article below:
Troubleshooting Exchange 2010 Management Tools startup issues
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Resolving WinRM errors and Exchange 2010 Management tools startup failures
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
Besides, please run the cmdlet below:
set-user alias -remotepowershellenabled$true
Xiu Zhang
TechNet Community Support

Activation failed with the following error: 0xC004B011

I just purchased the Office 365 bundle from Costco and I am using the various office products to do some work. I keep getting a request to activate the software, but when I try I receive the following error message: "activation failed with
the following error: 0xC004B011"
How do I activate the software and fix the issue? It also hows "The activation server determined that your computer clock time is not correct. You must correct your clock before you can activate." What time zone do I need to be set
to activate the software?

I had this issue and fixed it:
Just click the clock, and choose Change Date & time settings > Date and Time > Internet Time > click Change Settings > and finally click UPDATE TIME. I changed the server to time.windows.com and that's
it. It took me two attempts at clicking update time and it then said time updated successfully. Activation works fine afterwards.

SBS2011: Starting Exchange Management shell failed with the following Error 7BF3678A-829B-4F11-884C-4D 49060D84E6

SBS2011: Starting Exchange Management shell failed with the following Error 7BF3678A-829B-4F11-884C-4D 49060D84E6
This is not a REMOTE Exchange 2010 server, I'm launching it from the SBS2011 Console with the Domain Admin.
It looks like a permissions error, because when I use "RUN AS ADMINISTRATOR" on the exchange management tool, it launches with no errors and no issues...
I searched and I couldn't find anything that fits this exact error.
Thanks
Russ

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet
Subscriber Support
If you are TechNet
Subscription user and have any feedback on our support quality, please send your feedbackhere.
Andy Qi
TechNet Community Support

Flat File Data Load Error

I have a text file (with fields comma separated) coming from the legacy system which is to be loaded into BW.
Values in the fields sometimes have comma in them due to which it disturbs the file structure and hence the data load fails. Ex:
ColA     ColB     ColC
10     A     $100
10     B, Inc     $50
In the above case record 2 comes as
ColA     ColB     ColC     ColD
10     B     Inc     $50
I am having this problem for 3 fields. Any suggestions on how fix this issue other then cleaning the file manually.
Thank you,
sam

Option1: Try to use a different separator like ;
Option2: For these three records note down where the , is...delete the comma from the records, load the data into PSA only, re-insert the comma into these records now and finally update into the data targets from the PSA.
Hope this helps.

Infocube data loads fail with UNCAUGHT_EXCEPTION dump after BI 7.01 upgrade

Hi folks,
We're in the middle of upgrading our BW landscape from 3.5 to to 7.01. The Support pack we have in the system is SAPKW70103.
Since the upgrade any of the data loads going to infocubes are failing with the following
ABAP dump UNCAUGHT_EXCEPTION
CX_RSR_COB_PRO_NOT_FOUND.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RSR_COB_PRO_NOT_FOUND', was not
     caught and
    therefore caused a runtime error.
    The reason for the exception is:
    0REQUEST is not a valid characteristic for InfoProvider
Has anyone come accross this issue and if so any resolutions you adopted to fix this. Appreciate any help in this regard.
Thanks
Mujeeb

hi experts,
i have exactly the same problem.
But I can`t find a test for infoobjects in rsrv. How can I repair the infoobject 0REQUEST`?
Thx for all answers!
kind regards
Edited by: Marian Bielefeld on Jul 7, 2009 8:04 AM
Edited by: Marian Bielefeld on Jul 7, 2009 8:04 AM

Flat file data loading error using process chain

Hi SAP Experts,
I am having a problem loading the flat file data to the cube using process chain. The issue is that when i run the process chain it fails giving the message " Date format error, please enter the date in the format _.yyyy" . I am using " 0calmonth in the datasource" . Strange is that when i manually execute the infopackage, i dont get any errors and am able to load the same file successfully to the dso and the cube. Is there any special setting for the process chain that i am missing?
The date format in the flat file is mm/yyyy. I have tried all the options i could including recreating the datasource and invain dont see any success so far. please help me solving this problem as we r in the middle of testing cycle.
Thanking you all for your quick response and support all the time.
Kind Regards,
Sanjeev

Hi Sanjeev,
I believe you are opening the .csv file again after saving it. In this case the initial 0 in single digit month (say 02/2010) is getting changed to 2/2010 and the resulting file is not readable to the system. Just do not open the file after you have entered data in the .csv file and saved and closed it. If required, open the file in notepad, but not in excel in case you want to re-check the data.
Hope this helps.
regards,
biplab

Flat file data load - ODS - Look up data in Startroutine

Hi All,
There is a requirement that I have two ODS say 1) ABC and XYZ.
For Both ODS , We load flat file data.
First we load data to ABC for current fiscal period
During the data load to XYZ, We lookup part nos data in ABC for current fiscal period , if data there , for those part nos we load XYZ Flat file data.
My requirement is that , I need to fetch part nos data from ABC for Fiscal period < current fisacl period. Then I need to extract already loaded data for those part nos from XYZ and Mark the flag field as Non reportable .
How can we achieve this ?
Please advice
Thanks
Ajay

Hi ,
Thanks for your reply.
I have done so. When I add lines of My Internal table data to DATA_PACKAGE, It gives the syntax error that both structures are not unique. We have several fields in XYZ ods but they are not in Communication structure.
Thats the problem. Also , if I write the code , will it be executed for each datapackage. I mean , for each datapacket process , my code will fetch whole data from ABC and then from XYZ. Repetion will be there?
Any other logic can i use ?
Thanks
Ajay

Flat file data load failed with the below error

Similar Messages

Maybe you are looking for