Flat file loading... how to automate the loading of multiple files

HI Alll,
I'm wondering if it's possible to create a routine that automates the loading of several flat files into a PSA table.
I only want a single info package, and I would like this info package to load file 1, then load file 2, file 3 etc etc....
The alternative is to create info packages for each flat file, but this seems clunky and inefficient.
Is this possible?
Regards,
Frederick

Hi,
It is not possible with single infopackage. you have to create different infopackages. But you can put it in process chain in sequence to load different flat files.

Similar Messages

  • How to automate the loading of Correspondence attachment and templates

    Under the "*Administration - Document*" screen, in our application ( version 8.0.0.3 Public Sector ) , we have 4 tabs / views , they are "*Correspondence Attachments*", "*Case Attachments*", "*Correspondence Templates*" and "*Literature*". We are going to have at least 3000 of these files that are needed to be loaded into each of this view. Is there a way to automate the process of the bulk loading of these documents / files into Siebel ( The Siebel operation performed could be Insert , Update or Delete ).
    Your help is really appreciated.
    Thanks
    S

    "2. To avoid the above painful process as an ongoing task, setup the document server for
    handling this more smoothly. Refer Correspondence, Proposals, and Presentations Guide."
    We do have document server component up and running. But if we have 3000 templates that need to do loaded into Siebel , how can document server would help in this sense without having someone to manually creating a new Correspondence Template record ? I am looking for an automated process that can be reused repeatedly.

  • How to send the mail with multiple file attachments ?

    Sending mails with multiple files as attachments.

    You need to start from the app, assuming that it has an email function, that contains the files that you want to send as attachments. The Photos app allows you to send up to 5 photos on the same email, but if you want to send multiple file types then you need an app that supports all those file types. I use the GoodReader app which supports quite a few document/file types (e.g. PDF, Excel, Word, pictures), and from that I can select multiple files (including different types) and attach them to the same email.

  • How to automate the loading of excel file

    Hi Guru,
    As we know we can load excel file through ODI but their is some manual work we have to do each time and it will only support in Windows platform
    How we can load excel file through ODI in Unix system and it should be automate so in one directory i got this file it should able to load the data automatically no manual intervention required.

    On windows jdbc-odbc bridge is used to read from excel file. Since such odbc setup is available only on windows hence the restriction. If there is any type 4 jdbc driver available for excel that it would works on unix too. 

  • How to automate the data load process using data load file & task Scheduler

    Hi,
    I am doing Automated Process to load the data in Hyperion Planning application with the help of data_Load.bat file & Task Scheduler.
    I have created Data_Load.bat file but rest of the process i am unable complete.
    So could you help me , how to automate the data load process using Data_load.bat file & task Scheduler or what are the rest of the file is require to achieve this.
    Thanks

    To follow up on your question are you using the maxl scripts for the dataload?
    If so I have seen and issue within the batch (ex: load_data.bat) that if you do not have the full maxl script path with a batch when running it through event task scheduler the task will work but the log and/ or error file will not be created. Meaning the batch claims it ran from the task scheduler although it didn't do what you needed it to.
    If you are using maxl use this as the batch
    "essmsh C:\data\DataLoad.mxl" Or you can also use the full path for the maxl either way works. The only reason I would think that the maxl may then not work is if you do not have the batch updated to call on all the maxl PATH changes or if you need to update your environment variables to correct the essmsh command to work in a command prompt.

  • How to View the Loaded Data

    Hi,
    I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
    Thanks

    Hi Madhu,
    You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
    Regards
    Hemant

  • How to improve the load performance while using Datasources for the Invoice

    HI All,
    How to improve the  load performance while using Datasources for the Invoice . Actually my invoice load (Appx. 0.4 M records) is taking very long time nearly ~16 to 18 hrs  to update data from R/3 to 0ASA_DS01.
    If I load through flat file it will load with in ~20 Min for the same amount of data.
    Please suggest how to improve load performance.
    PS: I have done the Inpo package settings as per the OSS note.
    Regads
    Srininivasarao.Namburi.

    Hi Srinivas,
    Please refer to my blog posting [/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction|/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction] which gives the details about the package size setting for extractors. I am sure that will be helpful in your case.
    Thanks,
    Divyesh
    Edited by: Divyesh Jain on Jul 20, 2010 8:47 PM

  • I am unable to load ITunes, get Message:The ITunes library.itf file is locked

    I am unable to load ITunes, get Message:The ITunes library.itf file is locked on a locked disc or you do not have write permission on this file.
    This seems to have happened after an upgrade of ITunes. Have unistalled and reinstalled a new version, but get the same message. Can y ou help?

    iTunes: How to move your music to a new computer
    Alternate iTunes Library
    iTunes Troubleshooting quits, freezes, or launch issues
    Finding Shared iTunes Music Libraries
    How to transfer iPod files to iPod-Computer-iTunes (Windows-Mac)
    iTunes Frequently asked questions about viewing and syncing videos
    Moving your iTunes Media folder
    Transferring your iTunes Library iLounge
    What are the iTunes library files

  • Is it possible to automate the load of setup tables for LIS datasources?

    Hello,
    For LIS datasources, eg. 04 (shop floor control), once the production confirmation is done, we have to manually run the transaction OLI4BW to load the setup tables before extracting data to BW. Is there a way to automate the load of setup tables?
    Regards,
    Suraj

    Hi,
    Yes we can !
    Create variants for small ranges and scheduled all of them at a time. So that, loading will be completed soon.
    Thanks,
    Saru

  • How to improve the load performance

    can any body tell me how to improve the load performance

    Hi,
    for all loads: improve your ABAP code in routines.
    for master data load:
    - load master data attributes before the charateristic itself
    - switch number range buffering on for initial loads
    for transactional loads:
    - load all your master data IObjs prior loading your cube / ODS
    - depending on the ratio No.Records loaded / No.Records in Cube F fact table, drop / recreate indexes (if ration is mor than 40/50%
    - switch on number range buffering for dimensions with high number of records for initial loads
    - switch on number range buffering on master data IObjs which aren't loaded via master data (SIDs always created while transactional loads; eg document, item....)
    these recommendations are just some among others like system tuning, DB parameters...
    hope this helps...
    Olivier.

  • How to automate the upload x 509 certificate to SAP process.

    Hi Pros,
    We currently using x509 for SSO.  However, we have to manually load the x509 certificate to the SAP ABAP system for every new users, or a certificate is expired. 
    Has anyone been able to automate this process?  How to know when a certificate is about to be expired?  how automatically create the x509 cer file?  how to upload the x509 automatically to SAP ABAP?    Please let me know if more information is needed. 
    Thank you.
    Terrisa.

    Hi Julius & Olivierl,
    I had the programer look at the the RUSREXT program.  We tried to run the program step-by-step but not knowing how to 1. point the program to look at the certificate file, 2. mapping the values from the file to the variables in the program.  What should I fill in the fields on the screen below.  This screem came up during the step-by-step run of the RUSREXT program
    Enter Correct SNC Names in Table View VUSREXTID (from ....
    User                                         ____________    to  _______________
    User Group                                ____________   to  ________________
    External ID type                         DN
    Prefix of External Name              CN=
    Suffix of External Name               , OU=&WPOU, O=mySAP.com User, C=DE
    Optional: Name of Issuer             _____________________________________
    |_| Only Users Without Ext. Names
    |_| Test Mode
    Has anyone out there tried to automate this process to take place of TCode "EXTID_DN"?  Thank you.
    Terrisa.

  • How to automate the Acrobat Reader plugin in Internet Explorer

    Hi,
    I have been trying to figure out how to automate the Acrobat Reader plugin in Internet Explorer. My goal is to find a way to allow users of our web application to print PDFs to the default printer without having to go through the plugin's GUI. Our application includes a browser helper component, and I had hoped it would be possible to use the IWebBrowser2 interface's get_Document() method to get at some sort of interface to the plugin (as is possible for, say, a Word document hosted in Internet Explorer) and then use this to print the document. However, this does not work: get_Document(), when called on an IWebBrowser2 instance with a PDF loaded, returns E_NOINTERFACE. I also tried calling the IWebBrowser2 interface's ExecWB() method with OLECMDID_PRINT, OLECMDEXECOPT_DONTPROMPTUSER, and PRINT_DONTBOTHERUSER, and printed a blank page rather than the PDF.
    Is it possible to do what I am attempting? Like I said, my core goal is to print a PDF from within Internet Explorer without requiring user interaction. I'd appreciate any suggestions as to how I might accomplish this -- it doesn't _have_ to be by automating the plugin (maybe that is a the wrong approach... though it sure would be nice if the plugin provided access to its object model via IWebBrowser2->get_Document()).
    Thanks in Advance,
    Steve Mckinney
    Senior Developer
    Paxon Corporation

    IF that were entirely true, then the whole purpose of this thread is moot (automating printing server side). It is possible to load the file via URLs using the following html code:
    "<"body>
    "<"OBJECT id="pdf"
    type="application/pdf"
    width=800
    height=600 >
    "<"param name="src" value="http://localhost/pdfs/vorder_nc.pdf"/>
    "<"/OBJECT>
    "<"script language="JavaScript">
    function waitLoad()
    setTimeout("printFile()",2000);
    function printFile()
    var objPdf = document.getElementById('pdf');
    objPdf.PrintAllFit(1);
    "<"/script>
    "<"/body>
    So, if I used php or some other scripting language on the server to fill in the name of the pdf, I can load it via a URL, wait a couple of seconds for it to load, and then print it without user interaction. I wish that the LoadFile method would load a URL so that when it returns, I know it is loaded and I don't have to put faith in a timer that may not be enough for a large file.
    This is the situation I'm in. This way works but I don't like the timer. I'd rather have the plugin let me know when it's loaded. Is there another method that can help me do what I want?
    Thank again.

  • Pointer doesn't change into the loaded graphics icon or the loaded text icon

    My pointer doesn't change into the loaded graphics icon or the loaded text icon when placing images or text. How can I fix it?
    Thanks!

    You only need to ask once.
    Quick question

  • OB52 Posting Period Close:  Does anyone know how to automate the close?

    Does anyone know how to automate the FI Period Close (trans code OB52)?  Currently, the business users go into the screen and open and close any periods manually.  For the MM period close, we are able to do so because we found the program to use in the batch job.  For some reason, the FI side shows the program SAPL0F00 but this is only a view and will not allow a batch job to be created.  Does anyone know of the actual program used for the FI period close?

    Use program RFPERIOD_OPEN.  It may help.  For further details you may check the following thread.
    RFPERIOD_OPEN

  • How to read the data from Excel file and Store in XML file using java

    Hi All,
    I got a problem with Excel file.
    My problem is how to read the data from Excel file and Store in XML file using java excel api.
    For getting the data from Excel file what are all the steps i need to follow to get the correct result.
    Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
    Thanks & Regards,
    Sreenu,
    [email protected],
    india,

    If you want someone to do your work, please have the courtesy to provide payment.
    http://www.rentacoder.com

Maybe you are looking for