Flat File Upload Preview Not seen

Hi
can you please let me know why i am unable to view the Prieview Option in the Info package for Upload of Data From a Flat File i am using the BI Data Source to upload the data to the Data Traget.
The Data is loading fine except i dont see that PReview Option before loading the data to the PSA in the INfopackage.
regarsds
Krishna Mohan

hi,
The preview option for Data is available in Data Source in BI 7.0 and not in infopackage.
regards,
Arvind.

Similar Messages

Flat file message is not recognized.

I have been pulling my hair out for days now. I have an ANSI x12 214 v4010 document that validates against the xsd file in visual studio when I remove the Interchange headers
I add the interchange headers back and deploy for it to pick up the file and I get the error:
The flat file message is not recognized. Unrecognized messages are not allowed as per the specified configuration.
This is the extent of the error information that Biztalk will respond with. I have to assume the issue is with the interchange headers since I know the transaction portion of the document itself validates. Below is a copy of my headers.
ISA*00* *00* *ZZ*SEND *ZZ*RECV *040805*0416*U*00401*000000001*0*T*^~GS*QM*SEND*RECV*20040805*0416*000000001*X*004010~[214 Transaction]~GE*1*000000001~IEA*1*000000001~
I am beginning to believe the problem may be due to the trading partner agreement. I originally didn't have an agreement at all and was just publishing my service. I have now added two partners for the send and the receive. I also created
an agreement with the Hosted Partner qualifier matching the sender info in the header and the Guest Partner being the receiver info. I set the version and type to match, added the sender application qualifier (GS02) which matches the sender info (ISA06)
and set the schema to the one I validate locally X12_00401_214.
Despite having the agreement in place that matches the headers I still receiving a flat file message not recognized error with no additional error information.
Please rescue me from the insanity...

Hi,
We need a few more details about his scenario.
have you uploaded this particular schema to the service?
What kind of bridge are you using – EDI / AS2 / XML
What tool are you using to push the message to BizTalk service? If you are using EDI / As2 bridge, are you adding proper HTTP headers while sending message from the client?
You may go through the blog
Test the Bridges - Post messages – 3 easy tools for the developers
http://blogs.msdn.com/b/mabs/archive/2014/10/14/test-the-bridges-post-messages-3-easy-tools-for-the-developers.aspx
Check the section
Considerations for the EDI / AS2 Bridges
Hope this helps you
Girish Prajwal

BPS Flat File Upload Error Messages

Hi,
I am using the BPS flat file upload and am getting error messages. These error messages are coming from the user exit in the characteristics relationships. Unfortunately the message does not indicate which line on the upload file the error is for. In the user exit it does not pass the line no of the flat file that is being processed.
Does anyone have any ideas how the message could be enhanced to indicate the line in error or if there is another exit I could perform the validation in?
regards
Paul Cairncross

Hi Sai,
The issue is not the particular message. The message is in fact my message in the user exit in the characteristic relationships. The issue is when using the flat file upload the message does not indicate which line in the file the message apply's to. Looking at the userexit no line number is passed. This is not a problem in the web as the specific line is highlighted when the user is keying in the data.
Regards,
Paul Cairncross

FLAT FILE UPLOAD INTO BI

Hi,
What kind of questions are needed to be asked (from client) for requirements gathering for a flat file upload (from legacy system) to BI? Basically what are all the questions that i need to ask them to make sure I have all information for designing a flat file extractor?
Thanks

I would ask them what do they want to report on from the legacy system and is data already in R/3? I would also ask what kind of data is stored in the legacy system .... inventory, financial data, sales, etc ... Once I knew that, I would ask what do they want to report on .... stock quantities/costs, gl account data, revenue, deliveries, etc....
Then I would ask, do you want this to be seperated from the R/3 datastream? More than likely this will be yes, if not, fight to keep it seperated and possible in it's own cube/ODS and combine in a multiprovider (you need to use the same 0material, 0customer, 0vendor, 0gl_account info objects if you want to combine nicely on a multiprovider).
If the database the legacy system is on is either SQL Server or Informix or Oracle, you may want to consider DBConnect and connect directly to their tables.
In all cases, I try to avoid bringing everything in "just because we may need it". If the system is legacy and it's been a legacy for 2 years, see what people keep going back for and grab that data only. If someone claims to need data, but have not sought it out for 2 years, then the probably don't need it.
Also, check the granularity of the data. Do they need individual documents for legal reasons? Can you summarize the data? What are they going to use the data for?
Brian

BPC delta flat file upload possible?

Hi experts,
Ive been trying to find an answer of whether or not it is possible to retain member data on manual flat file upload into a dimension. We have created a dimension (employee) and have created some dummy nodes member data and would like to determine if it is possible to then keep this manual member data while manually loading further member data through flat file load. Is this sort of manual flatfile delta load possible? If so how? What is best practice here?
Also, is it possible to load data into a dimension using two methods IE manual upload file and then another form (IE BW load) without overwriting data? Im assuming this is where the merge data option comes in to play.
Any guidance would be much appreciated.
Regards,
Danielle

Hi Danielle,
While uploading data, if you have added dimension members manually, then, it never gets deleted untill and unless you specify for it.
In your scenario, you have created dummy members and want to upload data thru flat file. Then, the data will be uploaded only for those members for which you want to upload data, rest of the members will display the old data.
As you rightly said earlier, while running data manager package, you need to select MERGE option instead of REPLACE & CLEAR data values. This keeps the old data intact and adds the new ones as well.
Hope this clarifies further.
Rgds,
Poonam

Flat file Upload BSP page

Hi Marc,
I am following the July version of how-to. When generating the BSP page, I am told checkbrowser.htm and js.htm are not available. When I create a checkbrowser.htm and point the include to js3.htm, which is one of the page fragment available, there are a few other errors coming out. What am I missing?

Do you already know if the flat file upload is possible from a multi planning area? Because I get the error message that my multi planning area does not exist when executing the function.
Thnx.

Problem in Flat File Uploading

Hi everyone
During a flat file uploading, I get a message for each record of my SKU (Stock Keeping Unit), for eg for SKU 1017023, I got a message
<b>Value '1017023 ' for characteristic PISKU is in external format RRSV 9</b>
PISKU is the field name.
The whole extraction is failing.
Kindly provide me some suggestions as soon as poosible!!
If possible mail me at
[email protected]
Regards
Gajendra Singh

Hi,
It seems there is a space in the value '1017023 '.You have to edit in PSA and then send it again else delete the request and change the flat file entry and reload the data.
Hope this helps
Assign points if useful
Regards,
venkat

How To guide...for Flat File upload for User-Defined variables

Has anyone got link to the guide that describes how to do a flat file upload for populating User-Defined Variables ?
Any assistance will be appreciated.
Uche

SAP BW Business Planning and Simulation "How To" Guides
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ab9fd590-0201-0010-2590-be78eb70015c
How to Upload User-Specific Variable Selections in BW-BPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to upload user-specific variable selections in bw-bps.pdf
this is what you are looking for ?
Message was edited by: Murali

Create a flat-file upload for a BO XAI Inbound Service?

Hello all,
If we don't have a schema defined for a BO XAI Inbound Service, how can we create the XSL and the flat-file upload schema file for it.
Any advice?
Regards,
Kerr

I don't have problem to create the XSLT mapping.
But because it is to create a flat-file upload for a Business Object XAI Inbound Service, it doesn't have a schema on the server as to the thread Create Schema for Business Object to use for XAI Inbound Service?
And I can't create that flat-file upload without a schema on the server.
Or I can use the BO XAI Inbound Service WSDL instead to create the mapping for the flat-file upload.
Regards,
Kerr

Flat file upload error message

Hi Friends
I have designed an infocube and when i try to load data after selecting the option of flat file upload, i get the following error message," You have no authorization for basic types(activity 03)". Please clarify what it means.
regards
kris

hi Kris,
it may due to lack of authorization, please run transaction su53 and capture the info to your basis team to add you the needeed authorization.
hope this helps.

BI IP - Upload flat file - "requested resource not found" when typing URL

Hi,
we tried to implement the "upload flat file" functionality (blog Marc Bernard). We followed the different steps and included the bug fixes as well. When we want to launch the URL in an internet explorer session we get message "requested resource not found".
Hereby the URL used:
http://sapscmbid.vpkgrp.int:50100/sap/bc/webdynpro/sap/zrsplf_file_upload?sap-language=EN&planning_sequence=FILE_SEQ&show_messages=WEXA
Do you know what we did wrong? We would like to finish this by the end of this week ...
kind regards
D

Hi,
when we use URL http://sapscmbid.vpkgrp.int:50100/ we see the screens of the portal so I presume this server and port is accurate (we use the same link for the planning modeler and this works fine).
The SICF service zrsplf_file_upload has been imported and has status active. Should we check other things as well?
D

Flat file upload program is not working

Hi Experts,
I am using following code to upload a flat file from my local PC to SAP
The code is NOT inserting records in zassum, /bic/pzassum and /bic/tzassum. zassum is SAP BW infoobject. I have run debugger and found that data is getting populated correctly for ztable_data and ztable_text.
The program is getting compiled / activated successfully. I am even getting message " ZASSUM got updated successfully ". However the issue persists.
I am new for ABAP. I might have committed some mistake any where in the code.
Also pls let me know whether statement "PERFORM update_alv_grid_display" is really needed.
Thanks
Smith
FORM upload_batches.
DATA : wf_title    TYPE string,
          lt_filetab TYPE filetable,
          l_separator TYPE char01,
          l_action    TYPE i,
          l_count     TYPE i,
          ls_filetab TYPE file_table,
          wf_delemt TYPE rollname,
          wa_fieldcat TYPE lvc_s_fcat,
          tb_fieldcat TYPE lvc_t_fcat,
          rows_read TYPE i,
          p_error   TYPE char01,
          l_file      TYPE string.
TYPES : BEGIN OF test_struc,
           /bic/zassum TYPE /bic/oizassum,
           txtmd   TYPE rstxtmd,
           END OF test_struc.
DATA : test_upload TYPE STANDARD TABLE OF test_struc.
DATA : wa_test_upload TYPE test_struc,
         ztable_data TYPE TABLE OF /bic/pzassum,
         ztable_text TYPE TABLE OF /bic/tzassum,
         wa_upld_text TYPE /bic/tzassum,
         wa_upld_data TYPE /bic/pzassum,
         wa_actbatch TYPE /bic/pzassum.
wf_title = text-026.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title            = wf_title
      default_extension       = 'txt'
      file_filter             = 'Tab delimited Text Files (*.txt)'
    CHANGING
      file_table              = lt_filetab
      rc                      = l_count
      user_action             = l_action
    EXCEPTIONS
      file_open_dialog_failed = 1
      cntl_error              = 2
      OTHERS                  = 3.                          "#EC NOTEXT
IF sy-subrc <> 0.
    EXIT.
ENDIF.
LOOP AT lt_filetab INTO ls_filetab.
    l_file = ls_filetab.
ENDLOOP.
CHECK l_action = 0.
IF l_file IS INITIAL.
    EXIT.
ENDIF.
l_separator = 'X'.
wa_fieldcat-fieldname = 'test'.
wa_fieldcat-dd_roll = wf_delemt.
APPEND wa_fieldcat TO tb_fieldcat.
CLEAR wa_test_upload.
Upload file from front-end (PC)
File format is tab-delimited ASCII
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = l_file
      has_field_separator     = l_separator
    TABLES
     data_tab                = i_mara
    data_tab                   = test_upload
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
IF sy-subrc <> 0.
    EXIT.
ELSE.
    LOOP AT test_upload INTO wa_test_upload.
      CLEAR : p_error.
      DESCRIBE TABLE test_upload LINES rows_read.
      IF wa_test_upload-/bic/zassum IS INITIAL.
        p_error = 'X'.
        MESSAGE s153 WITH wa_test_upload-/bic/zassum sy-tabix.
        CONTINUE.
      ELSE.
        IF sy-subrc = 0.
        ENDIF.
      ENDIF.
      wa_upld_text-txtmd = wa_test_upload-txtmd.
      wa_upld_text-txtsh = wa_test_upload-txtmd.
      wa_upld_text-langu = sy-langu.
      wa_upld_data-/bic/zassum = '11'.
      wa_upld_data-chrt_accts = 'abc'.
      wa_upld_data-co_area = '1234'.
      wa_upld_data-/bic/zbhpbcsg = 'uv'.
      wa_upld_data-objvers = 'A'.
      wa_upld_data-/bic/zass_mdl = 'pqr'.
      wa_upld_data-/bic/zass_typ = 'I'.
      wa_upld_data-/bic/zdriver = 'defg'.
      MOVE-CORRESPONDING wa_test_upload TO wa_upld_data.
      MOVE-CORRESPONDING wa_test_upload TO wa_upld_text.
      APPEND wa_upld_data TO ztable_data.
      APPEND wa_upld_text TO ztable_text.
    ENDLOOP.
    CALL FUNCTION 'MESSAGES_INITIALIZE'.
    IF ztable_data IS NOT INITIAL.
      CALL FUNCTION 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
        EXPORTING
          i_iobjnm               = 'ZASSUM'
          i_tabclass             = 'M'
        TABLES
          i_t_table              = ztable_data
        EXCEPTIONS
          attribute_name_error   = 1
          iobj_not_found         = 2
          generate_program_error = 3
          OTHERS                 = 4.
      COMMIT WORK.
      IF sy-subrc <> 0.
        CALL FUNCTION 'MESSAGE_STORE'
          EXPORTING
            arbgb = 'Zmy_prg'
            msgty = 'E'
            txtnr = '054'
            msgv1 = text-033
          EXCEPTIONS
            OTHERS = 3.
        CALL FUNCTION 'MESSAGE_STORE'
          EXPORTING
            arbgb = sy-msgid
            msgty = sy-msgty
            txtnr = sy-msgno
            msgv1 = sy-msgv1
            msgv2 = sy-msgv2
            msgv3 = sy-msgv3
            msgv4 = sy-msgv4
          EXCEPTIONS
            OTHERS = 3.
        MESSAGE e054(z_myprg) WITH 'ZASSUM'.
      ELSE.
        CALL FUNCTION 'MESSAGE_STORE'
          EXPORTING
            arbgb = 'Z_BM_BPS'
            msgty = 'S'
            txtnr = '053'
            msgv1 = text-033
          EXCEPTIONS
            OTHERS = 3.
        MESSAGE s053(z_myprg).
        IF ztable_text[] IS NOT INITIAL.
          CALL FUNCTION 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
            EXPORTING
              i_iobjnm               = 'ZASSUM'
              i_tabclass             = 'T'
            TABLES
              i_t_table              = ztable_text
            EXCEPTIONS
              attribute_name_error   = 1
              iobj_not_found         = 2
              generate_program_error = 3
              OTHERS                 = 4.
          IF sy-subrc <> 0.
            CALL FUNCTION 'MESSAGE_STORE'
              EXPORTING
                arbgb = 'Z_myprg'
                msgty = 'E'
                txtnr = '055'
                msgv1 = text-033
              EXCEPTIONS
                OTHERS = 3.
            CALL FUNCTION 'MESSAGE_STORE'
              EXPORTING
                arbgb = sy-msgid
                msgty = sy-msgty
                txtnr = sy-msgno
                msgv1 = sy-msgv1
                msgv2 = sy-msgv2
                msgv3 = sy-msgv3
                msgv4 = sy-msgv4
              EXCEPTIONS
                OTHERS = 3.
          ENDIF.
        ENDIF.
      ENDIF.
      COMMIT WORK.
    ENDIF.
ENDIF.
CALL FUNCTION 'RSDG_IOBJ_DEQUEUE'
    EXPORTING
      i_objnm = 'ZASSUM'
      i_scope = '1'.
PERFORM update_alv_grid_display.
CALL FUNCTION 'MESSAGES_SHOW'.
ENDFORM. " upload_batches

.

'File is not open' error when running DTP for flat file upload in BI

Dear Sir,
We are trying to upload master data from flat file for which we have
created respective DTPs. When we are running the DTPs we are getting an
error saying 'The file '&&filepath&&' is not open'. We also checked
that the file is not open, but still we are getting this error. Could
anyone please suggest what we have to do to solve this problem.
Many Thanks
Narendra

Hi,
I am currently facing the same error "Error in Source system". "The file 'path' is not open".
Could you please let me know how you resolved this issue.
many thanks.
Regards,
Madhusudhan

Beginner - Flat file upload error Help Please

Hi Everyone,
I am trying to upload a flat file [.csv] for the first time.
I created Info objects Material Id, Material Name , Price as keyfigure.
Material Id holds Material Name and Price as attributes and is With Text and With Master Data.
For the Keyfigure, Price, I have selected Amount and defined as USD.
In the flat file, i have Material id, Material Name, Price, Description for Text, its something like this
Mid         M-Name   Price      DESCRIPTION
10001     A              99.99     AA
When I create an Application Component and thereafter create a data source for master data attributes for Material
and select the flat file and upload it, then the data types for Keyfigure PRICE changes to FLTP Length 16, its no longer as DEC and i get some werid data for Price field, something like
"99.990000000001E+02" instead of 99.99.   Why am I having this problem and how could this be resolved ?
I thought i would start off with my best foot forward but it didnt work. Any kind of help would be highly appreciated. Thanks guys..Byee

hi,
these are the BI.7 steps
BW 7.0
Uploading of master data
Log on to your SAP
Transaction code RSA1u2014LEAD YOU TO MODELLING
1. Creation of Info Objects
u2022 In left panel select info object
u2022 Create info area
u2022 Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
u2022 Create new characteristics and key figures under respective catalogs according to the project requirement
u2022 Create required info objects and Activate.
2. Creation of Data Source
u2022 In the left panel select data sources
u2022 Create application component(AC)
u2022 Right click AC and create datasource
u2022 Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
u2022 In general tab give short, medium, and long description.
u2022 In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
u2022 In proposal tab load example data and verify it.
u2022 In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
u2022 Activate data source and read preview data under preview tab.
u2022 Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
u2022 In left panel select info provider
u2022 Select created info area and right click to select Insert Characteristics as info provider
u2022 Select required info object ( Ex : Employee ID)
u2022 Under that info object select attributes
u2022 Right click on attributes and select create transformation.
u2022 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
u2022 Activate created transformation
u2022 Create Data transfer process (DTP) by right clicking the master data attributes
u2022 In extraction tab specify extraction mode ( full)
u2022 In update tab specify error handling ( request green)
u2022 Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
BW 7.0
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1u2014LEAD YOU TO MODELLING
5. Creation of Info Objects
u2022 In left panel select info object
u2022 Create info area
u2022 Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
u2022 Create new characteristics and key figures under respective catalogs according to the project requirement
u2022 Create required info objects and Activate.
6. Creation of Data Source
u2022 In the left panel select data sources
u2022 Create application component(AC)
u2022 Right click AC and create datasource
u2022 Specify data source name, source system, and data type ( Transaction data )
u2022 In general tab give short, medium, and long description.
u2022 In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
u2022 In proposal tab load example data and verify it.
u2022 In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
u2022 Activate data source and read preview data under preview tab.
u2022 Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
7. Creation of data targets
u2022 In left panel select info provider
u2022 Select created info area and right click to create ODS( Data store object ) or Cube.
u2022 Specify name fro the ODS or cube and click create
u2022 From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
u2022 Click Activate.
u2022 Right click on ODS or Cube and select create transformation.
u2022 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
u2022 Activate created transformation
u2022 Create Data transfer process (DTP) by right clicking the master data attributes
u2022 In extraction tab specify extraction mode ( full)
u2022 In update tab specify error handling ( request green)
u2022 Activate DTP and in execute tab click execute button to load data in data targets.
8. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used
if it is helpful assign points
cheers
sivaRaju

Flat file upload in BW

Hi expert,
I'm using BI7 and I have got to upload a flat-file inside an ODS. The problem is that the file is for some fields Textual and for other fields Hexadecimal (Packed format).
For example for this file structure:
Field1 NUM 2
Filed2 PAKED 5
The first row can be:
in textual:
45
in Hexadecimal:
34 35 02 00 F8 20 1F
In what way can I read this file? Binary mode? Textal mode?
In what way do I need to set my datasource?
Thanks

Uploading of master data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
BW 7.0
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
5. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
6. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
7. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
8. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used

Flat File Upload Preview Not seen

Similar Messages

Maybe you are looking for