Flex Builder 3 error when changing project names

When you create a Flex 3 project (ex. Test1) and then rename
the project (ex. Flickr) the URL settings for the project do NOT
change. The stay as the original. Using the examples provided the
are originally:
http://localhost:3000/Test1/flex_bin/FlickrRIA.html
Even after changing the name of the project the URL settings
still default to the above and not to:
http://localhost:3000/Flickr/flex_bin/FlickrRIA.html

Found the problem in the FlexBuilder.ini file. I had to reduce the memory settings like this:
-Xms768m
-Xmx768m
Also see here: http://www.blog.techsplice.com/archives/38

Similar Messages

Referentail Integrity Error when changing Entity Name

I updated the metadata file to change a Entity name and when I tried to load I received an Integrity error because of some old Journal Entries from 2001-2003. Is there a way around this without modifying the journal entries?
Metadata referential integrity check started at 14:46:19
Journals::ACT_APR_TAXADJ     Scenario::ACTUAL     Year::2003     Value::<Parent Curr Adjs>     Period::April          has 2 records of Changed::[ ENTITY::CAMPINAS ]
Journals::ACT_FEB_TAXADJ     Scenario::ACTUAL     Year::2003     Value::<Parent Curr Adjs>     Period::February          has 2 records of Changed::[ ENTITY::CAMPINAS ]
Journals::ACT_JAN_TAXADJ     Scenario::ACTUAL     Year::2003     Value::<Parent Curr Adjs>     Period::January          has 2 records of Changed::[ ENTITY::CAMPINAS ]
Journals::ACT_JUL_TAXADJ     Scenario::ACTUAL     Year::2003     Value::<Parent Curr Adjs>     Period::July          has 2 records of Changed::[ ENTITY::CAMPINAS ]
Journals::ACT_JUN_TAXADJ     Scenario::ACTUAL     Year::2003     Value::<Parent Curr Adjs>     Period::June          has 8 records of Changed::[ ENTITY::CAMPINAS ]
Journals::ACT_MAR_TAXADJ     Scenario::ACTUAL     Year::2003     Value::<Parent Curr Adjs>     Period::March          has 8 records of Changed::[ ENTITY::CAMPINAS ]
Journals::ACT_MAY_TAXADJ     Scenario::ACTUAL     Year::2003     Value::<Parent Curr Adjs>     Period::May          has 2 records of Changed::[ ENTITY::CAMPINAS ]
Journals::ACTUAL2001APR282     Scenario::ActPara     Year::2001     Value::<Parent Curr Adjs>     Period::April          has 2 records of Changed::[ ENTITY::CAMPINAS ]
Journals::ACTUAL2001DEC282     Scenario::ActPara     Year::2001     Value::<Parent Curr Adjs>     Period::December          has 5 records of Changed::[ ENTITY::CAMPINAS ]
Journals::ACTUAL2001FEB282     Scenario::ActPara     Year::2001     Value::<Parent Curr Adjs>     Period::February          has 2 records of Changed::[ ENTITY::CAMPINAS ]
Journals::ACTUAL2001MAR282     Scenario::ActPara     Year::2001     Value::<Parent Curr Adjs>     Period::March          has 2 records of Changed::[ ENTITY::CAMPINAS ]

As long as you are only changing the name of a parent you will only be affected by any Parent currency adjustment Journals that were made to that Parent/entity combination. The solution to unpost the Journals, change the parent, and repost the journals will solve the problem for now. You are correct in assuming this is not best practice. Part of the beauty of HFM is to have many organizational structures (hierarchies) and for Journals to follow the entities when you move them or change names (rarely). If you assign a parent currency Journal to a specific parent/entity combination and you have organizational changes down the road you will run into this again. We safeguard against this by having a default hierarchy that contains all Base entities. You need one for each currency group. All our parents are USD, so we only require one group, USD_Journals. Use this as the parent for all Parent currency Journal entires. Then it does not matter which hierarchy the entity shows up in, the journal will follow and the USD_Journals/Entitiy combination will never go away.
This solution is for Parent entities only. Base entities should not ever change names or default currencies. It creates the mess I was describing earlier and dangerous risk of loss of historical data.
Edited by: GCAPO on Mar 18, 2013 7:08 AM

File Name Associations Drop Out When Changing Project Name

Posting on behalf of a colleague. He's using Robohelp X5 on a
Windows XP computer.
"We have frequent occasions in which we must take an existing
online help project (ABC_001, for example), make some
tweaks/additions/omissions, and release a revised online help
project (ABC_002). We have been cloning the existing help project
(ABC_001), renaming the project, making the necessary changes to
the help project, adding or deleting map IDs in .hh files as
necessary, importing revised .hh files as necessary, and then
releasing the project under the new name. We want to maintain map
ID numbers and assignments (25ANG1, Map #: 640, File name:
Synchronism Check#25ANG1) from ABC_001 to ABC_002, but the File
name associations drop out when we change the project name. It is
then a laborious process to go through the list and reassign all
the topics to the appropriate File names. Is there any way to
maintain topic labels with their map ID numbers and their File name
associations from one project to another?"
TIA

My colleague's reply:
"I discovered that it requires just one more step in the help
project before I can actually see the file name
associations/aliases again. I have to recompile, as Colum
recommended, but then I have to close down RoboHelp and reopen the
project. Then, if I am in Project View and navigate to
Context-Sensitive Help/Map Files/All Map IDs, I can see all of the
file name associations again. Thank you, Colum, for your
help!"

PDA build error when using a 'value change' event on two controls

I get a build error when I use a 'value change' event on controls of a different type or even a different numeric representation. I'm using LV 7.1 PDA with no other modules installed. Attached is a picture of the entire code and the error message.
Try to take over the world!
Attachments:
PDA Error.jpg ‏48 KB

Hi,
I verified the error that you are seeing. It appears to be a bug hence I have reported it to our developers. Hopefully this bug would be fixed in the next relaese of the PDA module.
Thank you for pointing this to us. It is through feedback that we can make LabVIEW PDA module even better.
Regards,
Ankita A.
National Instruments

ERROR When Create Project

Hello,
I receive this below error when create project
GeneralQueueJobFailed (26000) - CreateWssSite.CreateWssSiteMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='c27f372b-2a35-e311-9420-00155d000806' JobUID='05a50b2a-2a35-e311-9420-00155d000806' ComputerName='cb123222-a0b2-4ad1-bd20-3e4809df7a4a'
GroupType='CreateWssSite' MessageType='CreateWssSiteMessage' MessageId='1' Stage='' CorrelationUID='58b84c9c-8266-f0a7-f7a4-a41dcfc7411f'. For more details, check the ULS logs on machine
cb123222-a0b2-4ad1-bd20-3e4809df7a4a for entries with JobUID
05a50b2a-2a35-e311-9420-00155d000806

Hi Khaleel,
Do you see only this message or do you also see something like below:
CreateWssSiteContent: Creating project site failed! Project Uid=8e180c10-5433-4424-a236-54ea989872fa, site URL=http://PROJECT.test.com/PWA/AAAtest1000, site name=AAAtest1000. Microsoft.SharePoint.SPException: The site template requires that the Feature {e8389ec7-70fd-4179-a1c4-6fcb4342d7a0}
be installed in the farm or site collection. at Microsoft.SharePoint.Utilities.SPUtility.ThrowSPExceptionWithTraceTag(UInt32 tagId, ULSCat traceCategory, String ......
So, if you see the above message, its a feature that is missing. How many servers do you have in the farm? Do you have a separate project application service server?
In that case you will have to copy the feature under "14\TEMPLATE\FEATURES" features folder from WFE to application server also. This is because when creating a project workspace, PSI will refer to this feature on application
server and since it is not present in application server, it fails creating the site.
Happy troubleshooting.....
Vikram Daruru - MSFT

Oracle warehouse builder error when I execute any mapping

oracle warehouse builder error when I execute any mapping:
I have installed OWB successfuly, It still no longer working correctly: it executed all the mappings, but it suddenly becomes incapable to execute any mappings in any project. It validates successfuly the mappings but in the execution it show the message :
" ora-06550 : ligne1 colonne19..."
please help me to correct this error.
thank you.

Make sure that there is no primary key or index on this table who exceed the limit.
For more information see
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_wm2.htm#105677

Trouble when a project name starts with ´@´.

I have a trouble when a project name starts with ´@´. I can´t watch any photo into the aperture browser.
Is that a bug? Any help please?
Thanks in advance.

I have a trouble when a project name starts with ´@´. I can´t watch any photo into the aperture browser.
What is your Aperture 3 version? Are you using the latest version? For me projects with '@' in the name can be viewed in the browser; I'd need more information to reproduce that problem on my system.
But I would refrain from using such characters in filenames and library items, like projects and folders anyway.
All characters, that have a special meaning in the Mac OS X unix shell, like '@', '|', '~', '.', `/` may cause trouble when exporting or sharing the files.
Regards
Léonie

Known issue: Cortana will not pronounce your name during setup or when changing your name (Windows 10 Insider Preview SDK and tools, April 2015 release)

Cortana may not speak your name when tapping the "Hear how I'll say it" button when setting up your name for the first time or when changing your name in the settings panel.

There is no workaround for this issue. However, you can still complete the process of setting or changing your name.

Build error when trying to creat the project from inactive DC..

Hello Experts,
When I am trying to create a project from the inactive DC its giving and error message like build failed.When I switch to webdypro prespective I can see the project created.So please help me out in resolving the issue.
Thanks,
Harish.

Hi Harish,
Are you able to see the code and the components in the Webdynpro perspective. You can try the different options like Reload, Repair and Refresh.
See in the log why the build is failing.
Also check this thread:
JDI:Import an existing DC fails BUILD; Used component not found: javaLib
May be it helps.
Regards.
Rajat

Flex Builder not compiling changes

HELP!
I have a flex project that will build and run OK. If I make
changes to the a file in the project (an actionscript file to be
exact) the changes do not seem to compile. AN example is I take out
huge sections of the code and the project still will build and run.
I can also put in alert.show in the code and the code does not
execute.
This project is imported and originally comes out of SVN.
I have tried the clean build.
I can create my own project and make changes. Everything
works, but when I use the project created by someone else loaded
into SVN I cannot make any changes to the project. It is like Flex
Builder is compiling files from another location.
Please help. I am out of ideas.

- If there are any errors in the errors/console panel, a new
swf won't be created
- Make sure the target SWF file isn't set to Read-Only. It'll
prevent Flex Builder from updating the file.
- Check your build settings to make sure where FB is creating
the file is the same location you expect it to be

Flex builder error

Im using Flex builder 2.0.1 (since I didnt find a forum for
flex builder 2 Ill post here...)
I've opened an existing project, but I cant run the mxml
file. When I try to open the mxml file to edit it, in the Flex
development perspective, I've got the following error message (and
the file was not oppenet for editing):
Unable to create this part due to an internal error. Reason for
the failure: An unexpected exception was thrown.
If I press Details, it shows:
java.lang.NullPointerException
at
com.adobe.flexbuilder.project.actionscript.internal.ActionScriptProjectSettings.computeDy namicReferences(Unknown
Source)
at
com.adobe.flexbuilder.project.actionscript.internal.ActionScriptProject.updateDynamicProj ectReferences(Unknown
Source)
at
com.adobe.flexbuilder.project.actionscript.internal.ActionScriptProject.updateToolCompile Settings(Unknown
Source)
at
com.adobe.flexbuilder.project.actionscript.internal.ActionScriptProject.doSetProjectDescr iption(Unknown
Source)
at
com.adobe.flexbuilder.project.internal.FlexProject.doSetProjectDescription(Unknown
Source)
at
com.adobe.flexbuilder.project.actionscript.internal.ActionScriptProject.loadDescription(U nknown
Source)
at
com.adobe.flexbuilder.project.actionscript.internal.ActionScriptProject.<init>(Unknown
Source)
at
com.adobe.flexbuilder.project.internal.FlexBasedProject.<init>(Unknown
Source)
at
com.adobe.flexbuilder.project.internal.FlexProject.<init>(Unknown
Source)
at
com.adobe.flexbuilder.project.actionscript.ActionScriptCore$2.doCreate(Unknown
Source)
at
com.adobe.flexbuilder.project.actionscript.ActionScriptCore$ProjectCreator.run(Unknown
Source)
at
org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1721)
at
com.adobe.flexbuilder.project.FlexWorkspaceRunner.run(Unknown
Source)
at
com.adobe.flexbuilder.project.actionscript.ActionScriptCore$ProjectCreator.safeGetOrCreat e(Unknown
Source)
at
com.adobe.flexbuilder.project.actionscript.ActionScriptCore.getProject(Unknown
Source)
at
com.adobe.flexbuilder.project.FlexProjectManager.getActionScriptOrFlexProject(Unknown
Source)
at
com.adobe.flexbuilder.codemodel.internal.project.EclipseProjectListener.registerProject(E clipseProjectListener.java:691)
at
com.adobe.flexbuilder.codemodel.internal.project.EclipseProjectListener.registerFile(Ecli pseProjectListener.java:740)
at
com.adobe.flexbuilder.editors.common.editor.AbstractFlexDocumentProvider.connect(Abstract FlexDocumentProvider.java:90)
at
com.adobe.flexbuilder.editors.mxml.code.MXMLDocumentProvider.connect(MXMLDocumentProvider .java:59)
can you help me?? I dont know what to do...

What was the project created with, the same version of Flex
Builder or a newer or older one than what you have now? Did you try
creating a new project and bringing in the same files?

Flex build errors and warnings not in English but in Dutch

Hello Flash Builders,
I'm using Flash Builder 4 beta and both Flex SDK 3.4 and 4.0 beta 2. The problem I have is pretty annoying. Many error and warning descriptions, which you see in the "Problems" pane in Flash Builder, are in Dutch. Why? I do not know. I never told it to and I can't find anywhere in the settings an option to change it. I did not download the Flex SDK in Dutch, if that's even possible. Unless they forced me to, because they found out I live in Holland I think I would like Dutch compile error descriptions.
Though I am Dutch, most of the time the Dutch descriptions are fare more difficult to understand than the English versions. And looking up an error when you don't know what it means is also pointless, cause the most common language on the net is ofcourse English and not Dutch.
Someone knows how to change the language of the compiler error and warning descriptions?
Any help would be great!
Many thanks.

Hi,
DBNetLib (Database Network Library) errors occur when the BizTalk Server runtime is unable to communicate with either the MessageBox or Management databases. When this occurs, the BizTalk Server runtime instance that catches the exception shuts down and
then cycles every minute to check to see if the database is available.
Check if there is any server restart activity happening every night?
Alternatively, you might need to
Set the SynAttackProtect registry setting as described in
http://support.microsoft.com/kb/899599. Additionally,
look at the Group policy for that SQL server to be sure that the Group Policy does not periodically UNDO the setting change that you did above.
Refer:
[DBNETLIB][ConnectionWrite (send()).]General network error. Check your network documentation.
Other possible causes could be
1) Low hardware specs (Could be hard disk memory issue, check the free space on the server)
2) Sharing one server or disk for more than one group of BizTalk databases
It could also be a network card issue that could we worked around by turning off TCP Chimney using the following command:
Netsh int ip set chimney DISABLED
For more information, see
Microsoft support article 942861.
Refer for details:
Avoiding DBNETLIB Exceptions
Similar issue reported here ->
BizTalk service stopping automatically.
Also refer this link and look into the description of Error 6,10 and 11.
BizTalk - Errors and Warnings, Causes and Solutions
Rachit
Please mark as answer or vote as helpful if my reply does

Debug error when changing blending modes

Hi there,
I get a Debug Error every time I use 2 Adjustment Layers one above each other, with the following effects applied:
Adjustment Layer Above:
- Tint, not keyframed
- Opacity Blending Mode: Color Dodge
Adjustment Layer Below:
- Venetian Blinds, not keyframed
- Offset, keyframed
- Turbulent Displace, keyframed
- Opacity Blending Mode: Normal
Media layer below:
- JPG, Canon 60D - 5184x3456 - no effects applied
The error I get (option to 'Continue', but the program doesn't respond and needs to be closed):
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[..\..\Src\CutlistRenderer.cpp-717]
Error in Events panel:
An input contract violation has occurred!
I first started to get this error, while working with various media files in 1440x1080/HDV 1080i mode (Sony Z7U native)/29.97fps/1.33 sequence. Trying to understand what it goes wrong, I created a new project and recreated the adjustment layers (AL) with same effects applied - the only thing changed was the JPG added as media under both ALs. Same debug errors every time the blending is changed from normal to any other blending mode. With normal blending on the AL above, everything is fine.
After further testing, it looks like even with only one AL (no effects) above the JPG, get the same debug error when blending is changed from normal to any other mode.
Important note: Same layer+effect configuration applied in 1920x1080/ARRI Cinema mode/24fps/1.0 sequence - it works with no debug error. Haven't tried any other editing modes yet.
Layers, in order from top:
- AL (Venetian Blinds, Tint, Offset, Turbulent Displace - Color Dodge blending)
- AL (Venetian Blinds, Tint, Offset, Turbulent Displace - Normal blending)
- AL (Timecode effect)
- Title
- media, MPEG (1440x1080, 29.97 frame rate, 1.3333 pixel aspect ratio)
- After Effects composition (dynamic link) 1920x1080 - content: media file, MPEG (640x480, 30fps, 1.0 + various titles and effects, including color dodge blending
I googled for similar error reports, there are none related to Premiere Pro.
I don't know what else to do, rather than just avoid using this effect configuration.
Does anyone else had this issue, even in different situations?
Thank you very much for any feedback.
Best,
Mark
Hardware:
HP Z820
Dual Xeon E5-2643 - driver 6.1.7600.16385
Dual nVidia Quadro 4000 - driver 8.17.12.7628
64GB RAM
SSD 250GB for System
HDD 3TB for Media
Software (up to date):
Adobe Premiere Pro CS6 - Version 6.0.3 (001 (MC: 264587))
Windows 7 x64 - 6.1.7601 Service Pack 1 Build 7601

I've never seen that error myself. If you have a way to avoid it, might be best to just do that.

Error in changing the name of an event

When I go to change the name of an event in imovie it gives me this message "Move Failed - This file could not be moved:
/Users/asrevelli/Movies/iMovie Events.localized/July- - Day 18
(-5000)
Anybody know what the deal with this is? I can change the name of projects without a problem but I can't change the name of events. When I try and change it in the finder it tells me that I don't have sufficient access to do that. Please Help!!!

No, it's not giving me that type of warning. I have had that before. This is an access/privilege type of thing. It seems like it came after I updated to 10.5.7 Leopard. I can't say for sure though.

Flex Builder 3 under Eclipse - project .settings problem

I've been experiencing some odd problems with a project using FlexBuilder 3 plug-in with Eclipse.
The first problem I've noticed is that a file under the .settings dir has a red 'x' beside it. The offending
file is org.eclipse.jst.common.project.facet.core.prefs. I've left the file as is until I understand how it became corrupt.
The second problem is that .as and .mxml files are no longer being opened in the Flex Builder editor -
the are being opened in TextPad, which it the default editor outside of Flex Builder. I've tried all of the available
editors and none of them work under Flex Builder.
The third problem is that when I try to create a new Flex Builder project from New->Project-> there is no
option for a FlexBuilder project.
The Flex Development perspective is visible in the top right hand corner as usual. When I select Open Perspective
there is no Flex perspective.
Should I just reinstall the FlexBuilder plugin?
Thanks!

Hi Peter,
It has not been fully tested yet but a few of us are using
it. If you see any issues in Eclipse 3.3RC4 with FB3 Plugin, please
file a bug in our new public bug system:
http://bugs.adobe.com/flex.
thanks,
Sharon

Flex Builder 3 error when changing project names

Similar Messages

Maybe you are looking for