PDA build error when using a 'value change' event on two controls
I get a build error when I use a 'value change' event on controls of a different type or even a different numeric representation. I'm using LV 7.1 PDA with no other modules installed. Attached is a picture of the entire code and the error message.
Try to take over the world!
Attachments:
PDA Error.jpg 48 KB
Hi,
I verified the error that you are seeing. It appears to be a bug hence I have reported it to our developers. Hopefully this bug would be fixed in the next relaese of the PDA module.
Thank you for pointing this to us. It is through feedback that we can make LabVIEW PDA module even better.
Regards,
Ankita A.
National Instruments
Similar Messages
-
Tab Control Property Node gives a build error when used in a VI for LabVIEW PDA
Hello,
Iam new to LabVIEW development & need help regarding this:
We are trying to port a LabVIEW application from desktop to a Windows Mobile PDA. Please note that the LabVIEW application works fine on the desktop. In one of the VIs, a Tab control property node is used which gives a build error with LabVIEW PDA project. A sample VI which shows the problem & the error list snapshot is attached with this post. Can anyone please suggest an alternate approach to achieve the same functionality with LabVIEW PDA? Waiting for an early response from anyone...
Thanks & Regards,
Subhashini
Attachments:
VI_Error.zip 31 KBHello Ton,
Am glad that i got a response, thanks. The following links indicate that Tab control is supported on PDA target:
http://digital.ni.com/public.nsf/allkb/CBA335641E27B858862571490015EA88?OpenDocument
http://forums.ni.com/ni/board/message?board.id=170&message.id=221507&requireLogin=False
I feel that the Tab control property node that has been used in the VI (which is attached earlier) may not be supported on the PDA target. Can u (or any LabVIEW expert) suggest an alternate approach to achieve the same goal with LabVIEW PDA (changing colour of Tab control pages programatically)??
I had missed out some details earlier: We are using LabVIEW 8.5 PDA module on a Windows Mobile PDA.
Thanks & Regards,
Subhashini -
Build error when using custom error codes
When I try to build my application using custom error codes I receive the following error:
Error 1 occurred at Copy in AB_Engine_Copy_Error_Files.vi->AB_Application.lvclass:Copy_Error_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
=========================
NI-488: Command requires GPIB Controller to be Controller-In-Charge.
C:\Program Files\National Instruments\LabVIEW 8.5\user.lib\errors\BPMS-errors.txt
This only occurs the first time I attempt to build my application. If I build again immediately after receiving the error, everything works fine. My custom error codes were created using the provided editor, and I have included the file in my project. I have also checked the "Copy error codes" box in the advanced build specification settings.Hi Donovan,
The attached project is giving me the error previously discussed. Thanks for your help.
Attachments:
BuildError.zip 10 KB -
Double value change event if cursor is set busy (LV2009)
Hello everybody,
I just migrated from LV 8.0 to LV 2009 (on linux) and now got problems with a value change event. I want to send a command if a button is pressed and send another one if the button is released. After sending the command I need to wait for an acknowledge from the receiver and to avoid user interaction in between I lock the cursor with "set busy" VI until the acknowledge is received. To see, when the button is pressed or released, I use a value change event. Inside the event structure the cursor is set busy.
This worked reliable in LV 8.0 but not any more in LV 2009. The button's mechanical action is set to "switch until released" and if I press the button and keep it pressed it is reset to false automatically. The value change event is fired twice instead of only once (see attached vi) and "new value" is one time true and one time false. This doesn't happen if the mechanical action is set to "switch when pressed".
Does anybody have an explanation or a workaround for this behaviour? Am I doing something wrong or is this a bug in LV? For now I'll just keep the cursor unlocked.
Thanks for your help.
Attachments:
setMouseBusy_01.vi 11 KBHi ckis,
attached you'll find your modified example, it should do the trick now.
Regards,
Bernd
Attachments:
setMouseBusy_01.vi 9 KB -
I need to be able to use the value change event to handle sorting and control the properties of a multicolumn listbox. I have a slow loop that runs every 10 seconds and acquires new data if it's available. New data is appended directly to the list box. The event structure handles two events. One to change colors of the text when new data is added and another to sort the contents when a user clicks on the column header. The first event seems to work just fine. It only runs when new data is added. The second event is the problem. It runs every time the loop runs and ties up the user interface so that it does not respond.
What am I doing wrong??
By the way, it seems that whatever I am doing wrong crashes LabVIEW while I am
editing the vi. Probably during a partial compile. LabVIEW crashed twice while I was creating this test vi and I don't normally have trouble with LabVIEW crashing. It has crashed in both the transact.cpp and panel.cpp.
Thanks for any help or guidance you can offer.
Attachments:
Event_Handling_Test.vi 242 KBI have made a few quick modifications, see attached.
-- The lower loop should probably be a plain loop, since the timing is done by the event structure.
-- You cannot use a shift register in the upper loop if you want the acquired list to remain sorted.
Sorry, I am on vacation in the middle of nowhere and only spend a few minutes on this. There are many improvements possible.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Event_Handling_TestMOD.vi 200 KB -
LabVIEW PDA reports COREDLL.DLL error when using Call Library Function Node
I'm trying to build a LV PDA app that calls an external DLL file built using embedded visual C. When configuring the Call Library Function node I select the stub DLL, configure the I/O parameters and select OK. When the configuration dialog closes I get the following error:
LabVIEW: LabVIEW.exe - Unable to Locate Component
This application has failed to start because COREDLL.DLL was not found. Re-installing the application may fix this problem.
I do not get this error when using the configuration dialog in the example VIs.
Any suggestions as to the cause and/or the solution?
Thanks,
RyanHello -
When you create a PDA VI that calls a DLL, you must include the .c or .lib file that corresponds to the DLL. Take a look at these documents:
LabVIEW PDA Module Build Errors with VIs that Call DLLs
Why Do I Receive Errors When Calling a C++ DLL from a Call Library Node Using the LabVIEW PDA Module...
How To Call External Code in LabVIEW PDA for Palm OS
H
ow To Call External Code in LabVIEW PDA for Pocket PC
Hope this helps!
S Vences
Applications Engineer
National Instruments -
Error when using PPR in the OA page developed.
HI,
We are encountering an error when using PPR for the custom OA page being developed. I am using JDeveloper version 9.0.3.5(Build 1437) and Oracle Applications version 11.5.10.CU2. The scenario we are using PPR and the steps to reproduce the issue is mentioned below,
Scenario:
1) PPR is enabled for a custom OA page that is developed.
2) The PPR is being used to enable or disable a particular field based on the
selection of a value in a poplist in the same OA Page.
Error replication steps:
1) The user enters a value in the primary mandatory field which has to have
unique value.
2) The user selects a value from the poplist of a field which has PPR associated.
3) The user enters data in all other mandatory fields in the OA page except one
and tries to save the form and is shown a error message saying that all
mandatory fields are not entered(This is correct). Now the page gets
automatically refreshed and so the entered values are wiped off.
4) Now if the user again enters a value in the primary mandatory field (as in
step1) and if that value happens to be already existing value and then select
a value from the poplist which has PPR enabled then immediately the error
"Please enter a unique value" is entered, though we did not save the record.
The unique record validation would happen only at the time of saving the
record as per out business logic.
5) But if in Step 4 if i had entered a unique value again then the above said error
does not happen. There are few more similar kind of issues happening in the
same page because PPR is enabled.
Please note that this issue happens only when the page is deployed in a oracle
applications instance and not in JDeveloper.
Would this issue because of some cacheing problem? If Yes then how do we resolve it? Or would it be some other problem caused by our internal coding.
Any inputs for resolving this issue would be highly appreciated.
Thanks, Raja.What works in Jdeveloper should work when deployed in iAS as well.
And PPR is an old feature given quite enough time to mature, so before we suspect OA we should investigate the code. What I do not understand is how the page refreshes in Step 3 and why does the user have to re-enter the fields just because he missed entering one mandatory field the last time.
Mandatory field validations are client validations set by making the fields 'Required'. You obviously have client validations turned off on your PPR, otherwise you would be stuck with a javascript popup on PPR. The only way you can get the "Please enter unique..." error on PPR is Server Validation. So where have you placed this validation? If it is not in the EO, is it in the AM? And are you unconditionally calling the AM validation method in your processFormRequest? The PPR will also go through processFormRequest so I hope the PPR event is in a different if-else block. -
Java Heap Error when using Stateless Session Timer Bean deployed in Oracle
Hi,
Am getting following Java Heap Error when using Stateless Session Timer Bean deployed in Oracle 10g AS R3 (Oracle Containers for J2EE 10g (10.1.3.0.0) (build 060119.1546.05277) ):
06/08/02 14:58:43 javax.ejb.EJBException: java.lang.OutOfMemoryError: Java heap space
06/08/02 14:58:43 at com.evermind.server.ejb.EJBUtils.getLocalUserException(EJBUtils.java:304)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.system.AbstractTxInterceptor.convertAndHandleMethodException(AbstractTxInterceptor.java:67)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:45)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
06/08/02 14:58:43 at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:86)
06/08/02 14:58:43 at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:71)
06/08/02 14:58:43 at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1624)
06/08/02 14:58:43 at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:92)
06/08/02 14:58:43 at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:184)
06/08/02 14:58:43 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819)
06/08/02 14:58:43 at java.lang.Thread.run(Thread.java:595)
06/08/02 14:58:43 Caused by: java.lang.OutOfMemoryError: Java heap space
I had tried using -Xms / -Xmx options (upto 1 GB).
The trace of exception gets delayed (from being displayed on the console) as the memory size is increased; but after sometime it starts getting displayed on the console.
Even though this exception is displayed on the console, the Timer Bean continues to execute upto sometime before it finally crashes!
If anyone has encountered such problem; would appreciate if you could share the solution.
Regards, VidyadharHi guys, I have the same problem. I have an application EAR file with two modules (EJB and WAR starting in this order). The application can schedule a process via EJB timer. In this case restarting the server I receive the error above. If I change the modules start order --> WAR - EJB the server start correctly, but the application scheduler fails (the persistency is not working) with this error:
07/10/09 10:30:54 FINISSIMO: TimerTask.runBeanTimer java.lang.NullPointerException; nested exception is: java.lang.NullPointerExceptionjavax.ejb.TransactionRolledbackLocalException: java.lang.NullPointerException; nested exception is: java.lang.NullPointerException
java.lang.NullPointerException
at java.util.ListResourceBundle.handleGetObject(ListResourceBundle.java:107)
at java.util.ResourceBundle.getObject(ResourceBundle.java:319)
at java.util.ResourceBundle.getString(ResourceBundle.java:285)
at java.util.logging.Formatter.formatMessage(Formatter.java:108)
at oracle.j2ee.util.TraceLogFormatter.format(TraceLogger.java:124)
at oracle.j2ee.util.TraceLogger$TraceLoggerHandler.publish(TraceLogger.java:105)
at java.util.logging.Logger.log(Logger.java:428)
at java.util.logging.Logger.doLog(Logger.java:450)
at java.util.logging.Logger.log(Logger.java:539)
at oracle.ias.container.timer.TimerEntry.readObjFromBytes(TimerEntry.java:308)
at oracle.ias.container.timer.TimerEntry.getInfo(TimerEntry.java:107)
at oracle.ias.container.timer.Timer.getInfo(Timer.java:367)
at oracle.ias.container.timer.EJBTimerImpl.getInfo(EJBTimerImpl.java:89)
at com.finantix.foundation.integration.ejbtimer.EJBTimerServiceExecutorBean.ejbTimeout(EJBTimerServiceExecutorBean.java:42)
at com.evermind.server.ejb.interceptor.joinpoint.EJBTimeoutJoinPoint.invoke(EJBTimeoutJoinPoint.java:20)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:38)
at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1714)
at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:106)
at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:220)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
javax.ejb.TransactionRolledbackLocalException: java.lang.NullPointerException; nested exception is: java.lang.NullPointerException
at com.evermind.server.ejb.EJBUtils.getLocalUserException(EJBUtils.java:309)
at com.evermind.server.ejb.interceptor.system.AbstractTxInterceptor.convertAndHandleMethodException(AbstractTxInterceptor.java:73)
at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:55)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:38)
at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1714)
at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:106)
at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:220)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
at java.util.ListResourceBundle.handleGetObject(ListResourceBundle.java:107)
at java.util.ResourceBundle.getObject(ResourceBundle.java:319)
at java.util.ResourceBundle.getString(ResourceBundle.java:285)
at java.util.logging.Formatter.formatMessage(Formatter.java:108)
at oracle.j2ee.util.TraceLogFormatter.format(TraceLogger.java:124)
at oracle.j2ee.util.TraceLogger$TraceLoggerHandler.publish(TraceLogger.java:105)
at java.util.logging.Logger.log(Logger.java:428)
at java.util.logging.Logger.doLog(Logger.java:450)
at java.util.logging.Logger.log(Logger.java:539)
at oracle.ias.container.timer.TimerEntry.readObjFromBytes(TimerEntry.java:308)
at oracle.ias.container.timer.TimerEntry.getInfo(TimerEntry.java:107)
at oracle.ias.container.timer.Timer.getInfo(Timer.java:367)
at oracle.ias.container.timer.EJBTimerImpl.getInfo(EJBTimerImpl.java:89)
at com.finantix.foundation.integration.ejbtimer.EJBTimerServiceExecutorBean.ejbTimeout(EJBTimerServiceExecutorBean.java:42)
at com.evermind.server.ejb.interceptor.joinpoint.EJBTimeoutJoinPoint.invoke(EJBTimeoutJoinPoint.java:20)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
... 9 more
Any idea?
Thx Auro -
Multivalue error when using the previous() function
I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur -
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)
I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
Here's the error log of OMWB:
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
** user language: es
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
** Active Plugin : SQLServer2K
EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007Duplicate thread
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i) -
Need help going to error page from jsf component value change event
Afternoon all,
I have a jsp page which uses jsf components and when one of the jsf combo boxes components handles an value change event, the method 'handleTestComboValueChange' is fired.
Within this method if an error is caught I would like to display an error page instead of the currently displayed page.
Can some one tell me how to do this. I tried to use getFacesContext().getExternalContext().redirect("errorpage.jsp"); but I just got an illegalStackException error.
Any help would be great.
Thanks in advance,
Lexlog output listed below...
[14/04/06 14:52:48:781 BST] 6b0ec4d8 ProcessValida E com.sun.faces.lifecycle.ProcessValidationsPhase com.sp.exceptions.ServicePackagesException: My custom error message
[14/04/06 14:52:48:812 BST] 6b0ec4d8 ProcessValida E com.sun.faces.lifecycle.ProcessValidationsPhase TRAS0014I: The following exception was logged javax.faces.el.EvaluationException: com.sp.exceptions.ServicePackagesException: My custom error message
at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:130)
at javax.faces.component.UIInput.broadcast(UIInput.java:492)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:252)
at javax.faces.component.UIViewRoot.processValidators(UIViewRoot.java:346)
at com.sun.faces.lifecycle.ProcessValidationsPhase.execute(ProcessValidationsPhase.java:78)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
at com.ibm.faces.webapp.FacesGenericPortlet.execute(FacesGenericPortlet.java:637)
at com.ibm.faces.webapp.FacesGenericPortlet.processAction(FacesGenericPortlet.java:142)
at com.scottishpower.portlet.GoldenAccountPortlet.processAction(GoldenAccountPortlet.java:143)
at com.ibm.wps.pe.pc.std.cmpf.impl.PortletFilterChainImpl.processAction(PortletFilterChainImpl.java:104)
at com.ibm.wps.propertybroker.standard.filter.PropertyBrokerActionFilter.processAction(PropertyBrokerActionFilter.java:260)
at com.ibm.wps.pe.pc.std.cmpf.impl.PortletFilterChainImpl.processAction(PortletFilterChainImpl.java:95)
at com.ibm.wps.pe.pc.std.invoker.impl.PortletServlet.dispatch(PortletServlet.java:148)
at com.ibm.wps.pe.pc.std.invoker.impl.PortletServlet.doPost(PortletServlet.java:76)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at com.ibm.wps.pe.pc.std.cache.CacheablePortlet.service(CacheablePortlet.java:257)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:1095)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java(Compiled Code))
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.include(WebAppRequestDispatcher.java:254)
at com.ibm.wps.pe.pc.std.invoker.impl.PortletInvokerImpl.invoke(PortletInvokerImpl.java:204)
at com.ibm.wps.pe.pc.std.invoker.impl.PortletInvokerImpl.invoke(PortletInvokerImpl.java:168)
at com.ibm.wps.pe.pc.std.invoker.impl.PortletInvokerImpl.action(PortletInvokerImpl.java:82)
at com.ibm.wps.pe.pc.std.event.ActionEvent.execute(ActionEvent.java:111)
at com.ibm.wps.pe.pc.std.event.EventQueueManager.processEventLoop(EventQueueManager.java:86)
at com.ibm.wps.pe.pc.std.PortletContainerImpl.performEvents(PortletContainerImpl.java:168)
at com.ibm.wps.pe.pc.PortletContainerImpl.performEvents(PortletContainerImpl.java:229)
at com.ibm.wps.engine.phases.WPActionPhase.processPortlets(WPActionPhase.java:947)
at com.ibm.wps.engine.phases.WPActionPhase.execute(WPActionPhase.java:489)
at com.ibm.wps.state.phases.AbstractActionPhase.next(AbstractActionPhase.java:130)
at com.ibm.wps.engine.Servlet.callPortal(Servlet.java:710)
at com.ibm.wps.engine.Servlet.doGet(Servlet.java:562)
at com.ibm.wps.engine.Servlet.doPost(Servlet.java:736)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:76)
at com.ibm.wps.state.filter.StateCleanup.doFilter(StateCleanup.java:86)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:132)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:71)
at com.ibm.wps.mappingurl.impl.URLAnalyzer.doFilter(URLAnalyzer.java:258)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:132)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:71)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:1086)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java(Compiled Code))
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:201)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:125)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:286)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:652)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:448)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java(Compiled Code))
Caused by: com.sp.exceptions.ServicePackagesException: My custom error message
at pagecode.fragments.GSolus.getTariffsByRef(GSolus.java:297)
at pagecode.fragments.GSolus.handleServicePackageComboValueChange(GSolus.java:214)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
... 68 more
javax.faces.el.EvaluationException: com.sp.exceptions.ServicePackagesException: My custome error message
at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:130)
at javax.faces.component.UIInput.broadcast(UIInput.java:492)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:252)
at javax.faces.component.UIViewRoot.processValidators(UIViewRoot.java:346)
at com.sun.faces.lifecycle.ProcessValidationsPhase.execute(ProcessValidationsPhase.java:78)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
at com.ibm.faces.webapp.FacesGenericPortlet.execute(FacesGenericPortlet.java:637)
at com.ibm.faces.webapp.FacesGenericPortlet.processAction(FacesGenericPortlet.java:142)
at com.sp.portlet.GoldenAccountPortlet.processAction(GoldenAccountPortlet.java:143)
at com.ibm.wps.pe.pc.std.cmpf.impl.PortletFilterChainImpl.processAction(PortletFilterChainImpl.java:104)
at com.ibm.wps.propertybroker.standard.filter.PropertyBrokerActionFilter.processAction(PropertyBrokerActionFilter.java:260)
at com.ibm.wps.pe.pc.std.cmpf.impl.PortletFilterChainImpl.processAction(PortletFilterChainImpl.java:95)
at com.ibm.wps.pe.pc.std.invoker.impl.PortletServlet.dispatch(PortletServlet.java:148)
at com.ibm.wps.pe.pc.std.invoker.impl.PortletServlet.doPost(PortletServlet.java:76)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at com.ibm.wps.pe.pc.std.cache.CacheablePortlet.service(CacheablePortlet.java:257)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:1095)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java(Compiled Code))
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.include(WebAppRequestDispatcher.java:254)
at com.ibm.wps.pe.pc.std.invoker.impl.PortletInvokerImpl.invoke(PortletInvokerImpl.java:204)
at com.ibm.wps.pe.pc.std.invoker.impl.PortletInvokerImpl.invoke(PortletInvokerImpl.java:168)
at com.ibm.wps.pe.pc.std.invoker.impl.PortletInvokerImpl.action(PortletInvokerImpl.java:82)
at com.ibm.wps.pe.pc.std.event.ActionEvent.execute(ActionEvent.java:111)
at com.ibm.wps.pe.pc.std.event.EventQueueManager.processEventLoop(EventQueueManager.java:86)
at com.ibm.wps.pe.pc.std.PortletContainerImpl.performEvents(PortletContainerImpl.java:168)
at com.ibm.wps.pe.pc.PortletContainerImpl.performEvents(PortletContainerImpl.java:229)
at com.ibm.wps.engine.phases.WPActionPhase.processPortlets(WPActionPhase.java:947)
at com.ibm.wps.engine.phases.WPActionPhase.execute(WPActionPhase.java:489)
at com.ibm.wps.state.phases.AbstractActionPhase.next(AbstractActionPhase.java:130)
at com.ibm.wps.engine.Servlet.callPortal(Servlet.java:710)
at com.ibm.wps.engine.Servlet.doGet(Servlet.java:562)
at com.ibm.wps.engine.Servlet.doPost(Servlet.java:736)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:76)
at com.ibm.wps.state.filter.StateCleanup.doFilter(StateCleanup.java:86)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:132)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:71)
at com.ibm.wps.mappingurl.impl.URLAnalyzer.doFilter(URLAnalyzer.java:258)
at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:132)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:71)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:1086)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java(Compiled Code))
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:201)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:125)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:286)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:652)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:448)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java(Compiled Code))
Caused by: com.sp.exceptions.ServicePackagesException: My custome error message
at pagecode.fragments.GSolus.getTariffsByRef(GSolus.java:297)
at pagecode.fragments.GSolus.handleServicePackageComboValueChange(GSolus.java:214)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
... 68 more -
Any help will be greatly appreciated.
I got the following errors when using the ant task source2wsdd:
[source2wsdd] classpath C:\bea\weblogic81\server\lib\weblogic.jar;C:\bea\weblogi
c81\server\lib\webservices.jar
[source2wsdd] source2wsdd: Cannot find doclet class weblogic.webservice.tools.dd
gen.ServiceGen
[source2wsdd] 1 error
[ant] Exiting C:\project\DCII\ant\batch-build.xml.
BUILD FAILED
C:\project\ant\build.xml:67: The following error occurred while executing this l
ine:
C:\project\DCII\ant\batch-build.xml:326: javadoc execution failed
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
tHelper.java:539)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:388)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.Main.runBuild(Main.java:673)
at org.apache.tools.ant.Main.startAnt(Main.java:188)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:196)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:55)
Caused by: C:\project\DCII\ant\batch-build.xml:326: javadoc execution failed
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.runJavadoc(J
avaSource2DD.java:297)
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.execute(Java
Source2DD.java:150)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at ise.antelope.tasks.Call.execute(Call.java:17)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at ise.antelope.tasks.IfTask.doIf(IfTask.java:298)
at ise.antelope.tasks.IfTask.execute(IfTask.java:267)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:386)
... 10 more
--- Nested Exception ---
C:\project\DCII\ant\batch-build.xml:326: javadoc execution failed
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.runJavadoc(J
avaSource2DD.java:297)
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.execute(Java
Source2DD.java:150)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at ise.antelope.tasks.Call.execute(Call.java:17)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at ise.antelope.tasks.IfTask.doIf(IfTask.java:298)
at ise.antelope.tasks.IfTask.execute(IfTask.java:267)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:386)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.Main.runBuild(Main.java:673)
at org.apache.tools.ant.Main.startAnt(Main.java:188)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:196)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:55)
Total time: 8 seconds
The following is the major parts from my ant build file:
<path id="webservice.classpath">
<pathelement location="${wls.home.dir}/server/lib/weblogic.jar"/>
<pathelement location="${wls.home.dir}/server/lib/webservices.jar"/>
</path>
<target name = "initialize">
<mkdir dir="${build.dir}"/>
<mkdir dir="${class.dir}"/>
<mkdir dir="${dist.dir}/${deploy.env}"/>
<mkdir dir="${jdocs.dir}"/>
<mkdir dir="${weblogic.application.dir}"/>
<taskdef name="call"
classpathref="antelope.classpath"
classname="ise.antelope.tasks.Call"/>
<taskdef name="if"
classpathref="antelope.classpath"
classname="ise.antelope.tasks.IfTask"/>
<taskdef name="servicegen"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask"/>
<taskdef name="clientgen"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.webservices.clientgen.ClientGenTask"/>
<taskdef name="source2wsdd"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD"/>
<taskdef name="wldeploy"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.management.WLDeploy"/>
</target>
<target name="buildEar"
depends="buildCommonJar, ejbc">
<echo message ="[${module.name}] Checking to see if ${ear.file} is up to date...[${appc.classpath}]" />
<source2wsdd
javaSource="${webserviceServer_src_dir}/HelloWorld.java"
ddFile="${descriptor.dir}/webservice/web-services.xml"
serviceUri="/HelloWorld">
<classpath refid="webservice.classpath" />
</source2wsdd>
<echo message ="[Done with buildEar]" />
</target>Did you ever resolve this?
-
Weblogic 9.2 error when using spring framework and taglibs.
I am getting the following error when using spring binding for a command form class.
Class ExCommandForm
private String firmCode;
public String getFirmCode ()
public void setFirmCode ()
In my jsp I have the following
<spring:bind path="exCommandForm.firmCode">
<input name="<c:out value="${status.expression}"/>" type="text" value="<c:out value="${status.value}"/>" >
</spring:bind>
Ps. exCommandForm is the commandForm declaration in my SiimpleFormController.
When I deploy the application to weblogic 9.2 I get the following error :
<Apr 26, 2007 4:34:44 PM BST> <Error> <HTTP> <BEA-101017> <[weblogic.servlet.int
ernal.WebAppServletContext@1f601c6 - appName: 'BDRui', name: 'BDRui', context-pa
th: '/BDRui'] Root cause of ServletException.
java.lang.ClassCastException: javax.servlet.jsp.jstl.core.LoopTagSupport$1Status
at jsp_servlet._web_45_inf._jsp.__tradesearch._jspService(__tradesearch.
java:1075)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
tyHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:283)
Ps. Deploying application on Tomcat 5.23 works.
Can anyone help on this ?
cheers in advance.
More Info - Using Weblogic 9.2 on UNIX, servlet 2.4, jstl 1.1
regards
Edited by kings_citi at 04/26/2007 9:03 AM
Edited by kings_citi at 04/26/2007 10:35 AM
Edited by kings_citi at 04/26/2007 10:36 AMThe problem doesn't look like it has anything to do with wappers per se. The stack indicates that the JVM died when the persistent store tried to invoke a standard Java synchronize operation. JVM crashes need to be analyzed by a JVM expert, so I second the suggestion to solicit help from JVM experts and/or filing a case with customer support. In the mean-time, you can probably work-around the issue by either (A) ensuring you have a recent version of the JVM installed, or (B) temporarily switching to the Sun JVM.
Regards,
tom
Edited by: TomB on Sep 17, 2010 2:33 PM -
FSG Error when using segment override
Hi,
I have the following error when using segment override :
General Ledger: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RGRARG module: Financial Statement Generator
+---------------------------------------------------------------------------+
Current system time is 26-APR-2012 11:17:22
+---------------------------------------------------------------------------+
Starting Program RGRARG.
Arguments are:
0 RGRARG - RGRARG
1 username/password - username/password
2 0 - 0
3 Y - Y
4 Data Access Set ID - 1030
5 Chart of Accounts Id - 101
6 ADHOC Prefix - FSG-ADHOC-
7 Industry - C
8 Flex Code Id - GLLE
9 Default Ledger ID -
10 Report ID - 1011
11 Row Set ID - 3461
12 Column Set ID - 1018
13 Period of Interest - SEP-11
14 Unit of Measure ID - IDR
15 Rounding Option - C
16 Override Values - ----DIV3---000000
17 Content Set ID -
18 Row Order ID -
19 Report Display Set ID -
20 Output Option - R
21 Exceptions Flag - N
22 Miniumum Display Level -
23 Effective Date -
24 Parameter Set ID - 1011
25 Maximum Page Length - 58
26 Sub-Request Run ID - -998
27 Application Shortname - SQLGL
Message level is: Normal
rgrini() 26-APR-2012 11:17:22 rgrini.build_per_arr:
Query for period set name from GL_ACCESS_SETS
SELECT period_set_name
FROM GL_ACCESS_SETS
WHERE access_set_id = 1030
rgrini.build_per_arr:
period set name from GL_ACCESS_SETS:
ACCOUNTING
rgrini.build_per_arr:
Query for period names from GL_PERIODS
SELECT period_name,
to_number(to_char(end_date,'YYYYMMDD'))
FROM GL_PERIODS
WHERE period_set_name = :p_value
ORDER BY NLSSORT(period_name,'NLS_SORT=BINARY') ASC
control->report_id = 1011
control->row_set_id = 3461
control->column_set_id = 1018
control->row_order_id = 0
control->content_set_id = 0
control->display_set_id = 0
control->parameter_set_id = 1011
control->resp_lvl = 0
control->round_option = C
control->output_option = R
control->excp = FALSE
control->sub_req_run_id = -998
control->appl_id = 101
control->id_flex_code = GLLE
control->ldg_val_set_id = 1010673
control->ledger_id = 0
control->ledger_name =
control->ledger_currency =
control->access_set_id = 1030
control->security_segnum = 0
control->per_cnt = 162
control->runtime_currency = IDR
control->resp_id = 50386
control->resp_appl_id = 101
control->enforce_security = TRUE
control->sec_rules = NULL
control->reduced_ranges = NULL
control->num_reduced_ranges = 0
control->max_char_width = 1
control->total_num_cols = 0
control->page = NULL
<< rgrini() 26-APR-2012 11:17:22
rgranl() 26-APR-2012 11:17:22Current date and time: Thu Apr 26 11:17:22 2012
rgrgsa() 26-APR-2012 11:17:22
<< rgrgsa() 26-APR-2012 11:17:22
rgrdrs() 26-APR-2012 11:17:22req_id_str =
809694
rgrdpg.rgrdpg: Unable to read value for profile option RG_DEBUG_ON..
rgrprt.rgrprt: Defaulting value for profile option RG_DEBUG_ON to FALSE..
rgrgas() 26-APR-2012 11:17:22 Entering code to get axis set 1018
<< rgrgas() 26-APR-2012 11:17:22
rgrgas() 26-APR-2012 11:17:22 Entering code to get axis set 3461
<< rgrgas() 26-APR-2012 11:17:23
rgrgrp() 26-APR-2012 11:17:23
<< rgrgrp() 26-APR-2012 11:17:23
COA Structure :
Segment: LEDGER_SEGMENT : Ledger
Segment: SEGMENT1 : COMPANY
Segment: SEGMENT2 : ACCOUNT
Segment: SEGMENT3 : PRODUCT
Segment: SEGMENT4 : DIVISION
Segment: SEGMENT5 : DEPOT
Segment: SEGMENT6 : COST CENTER
Segment: SEGMENT7 : FUTURE
Segment value security is enforced for Financial Statement Generator reporting.
rgrrsr() 26-APR-2012 11:17:23
rgrrsf() 26-APR-2012 11:17:23
<< rgrrsf() 26-APR-2012 11:17:23
<< rgrcrl() 26-APR-2012 11:17:23
<< rgrrsr() 26-APR-2012 11:17:23
rgrpsr() 26-APR-2012 11:17:23The COMPANY segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All COMPANY values will be processed.
The ACCOUNT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All ACCOUNT values will be processed.
The PRODUCT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All PRODUCT values will be processed.
The DIVISION segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All DIVISION values will be processed.
The DEPOT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All DEPOT values will be processed.
The COST CENTER segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All COST CENTER values will be processed.
The FUTURE segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All FUTURE values will be processed.
<< rgrpsr() 26-APR-2012 11:17:23
rgrdrs.rgrdrs: Getting value for profile option EXPAND_PARENT_VALUE equal No.
PERF0005: Oracle error detected in get_def_ldgs - ORA-01403: no data found
<x get_def_ldgs() 26-APR-2012 11:17:24
<x get_def_ldgs() 26-APR-2012 11:17:24
rgrgax() 26-APR-2012 11:17:24 rgrgax:get_axes
Starting axis query.
rgumsg:
fdnwsc() is used by default
rgrgax.get_conts - Prepare:
ORA-00936: missing expression
Current date and time: Thu Apr 26 11:17:24 2012
Entered sauulc with code 1 from line 3333 of file rg/lib/rgrgax.c.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
0I have followed the following notes but it didn't help me
R12: FSG: PERF0005 Error Detected In GET_DEF_LDGS - ORA-01403: No Data Found Common Issues [ID 1368691.1]
Generating a FSG Report Application Does Not Find Profile Values for RG_LOGFILE_DETAIL_LEVEL and EXPAND_PARENT_VALUE [ID 165339.1]
does anyone know how to solved the problem ??
please advise
thxI have followed the following notes but it didn't help me
R12: FSG: PERF0005 Error Detected In GET_DEF_LDGS - ORA-01403: No Data Found Common Issues [ID 1368691.1]
Generating a FSG Report Application Does Not Find Profile Values for RG_LOGFILE_DETAIL_LEVEL and EXPAND_PARENT_VALUE [ID 165339.1]
does anyone know how to solved the problem ??If none of the docs help, please log a SR.
Thanks,
Hussein -
Error when using filter on date column in interactive report
Hi,
I'm getting the following error when using the filter on a date column. None of the criteria in the filter list work. All give me the same error but when I use the filter on a column feature (in the search bar) and use ">" and "<" those work.
Can someone please help me????
" Settledate is in the last 2 years
ORA-30175: invalid type given for an argument ORA-02063: preceding line from MAINDATA "I have a similar problem . I have an interactive report based on resultset stored in a collection; since all the columns of a collection are of string datatype, I convert the columns to appropriate datatypes before its returned to the user; everything works as desired except when I try to filter on a data column , I get a ORA-01858: a non-numeric character was found where a numeric was expected .
I turned on debug mode and am copying the output here , column c009 which is aliased to 'C' is the one that I am trying to apply the filter on
select
ROWID as apxws_row_pk,
"C001",
"C002",
"C003",
"C004",
"C005",
"C006",
"C007",
"C008",
"CHECKOUTTIMESTAMP",
"C010",
"C011",
"TO_NUMBER(C012)",
"TO_NUMBER(C013)",
"TO_NUMBER(C014)",
"C015",
"C016",
"C017",
"TO_NUMBER(C018)",
"C",
count(*) over () as apxws_row_cnt
from (
select * from (
Select c001,c002,c003,c004,c005,c006,c007,c008,to_date(c009,'dd-MON-yy HH24.MI') checkouttimestamp,
cast(to_date(c009,'dd-MON-yy HH24.MI') as timestamp) c,
--TO_TIMESTAMP(c009,'dd-MON-yy HH24.MI') c1 ,
trunc(to_date(c009,'dd-MON-yy HH24.MI')) checkoutdate,
c010,c011,to_number(c012),to_number(c013), to_number(c014),c015,c016,c017,to_number(c018) from apex_collections where collection_name = 'IR_BOOKSALES'
) r
where ("C" between systimestamp - ((1/24) :APXWS_EXPR_1) and systimestamp)*
) r where rownum <= to_number(:APXWS_MAX_ROW_CNT)
order by ROWID
0.04: IR binding: ":APXWS_EXPR_1"="APXWS_EXPR_1" value="1"
0.04: IR binding: ":APXWS_MAX_ROW_CNT"="APXWS_MAX_ROW_CNT" value="2000"
ORA-01858: a non-numeric character was found where a numeric was expected
I have tried to convert c009 to date, timestamp and timestamp with time zone datatypes ; they all return the same error ,but all 3 datatypes work fine with systimestamp when I run them in sqlplus. Any help would be appreciated.
Maybe you are looking for
-
1. When the mouse accidentally drifts over the Connections tab it pops up too quickly, the timeout should be configurable or should be a less agressive setting 2. Where's the pinpush for those windows a la JDeveloper - I use those all the time in JD
-
How to remove a message from a Topic before it's consumed?
Hi All, I'm using Weblogic JMS Extensions to publish messages to a topic so that consumers do not receive them for at least 1 hour after publishing. My problem is that I need to be able to delete selected messa
-
Creating a Custom Audio Transition
My boss has a client that is not satisfied with the audio fades that FCP comes with. He has created a fade-in and a fade-out that the client is happy with by using audio keyframes to manually control the action. He now needs to apply this to the tips
-
Lightroom3 not reading NEF Raw file
Hi, I've got a Nikon D600 and always shoot in NEF RAW format and before I've been able to use the Lightroom with my files on a diferent computer which broke down... Now I'm on a new computer with Lightroom 3, which is Lightroom version: 3.6 [795620]
-
Hi, is it possible to first capture the user state in an UDI Tasksequence to USB or Network drive and afterwards, after re-installation restore the user state via restore user state step? Customer wants this steps in refresh Scenario: UDI Tasksequenc