Debug error when changing blending modes

Hi there,
I get a Debug Error every time I use 2 Adjustment Layers one above each other, with the following effects applied:
Adjustment Layer Above:
- Tint, not keyframed
- Opacity Blending Mode: Color Dodge
Adjustment Layer Below:
- Venetian Blinds, not keyframed
- Offset, keyframed
- Turbulent Displace, keyframed
- Opacity Blending Mode: Normal
Media layer below:
- JPG, Canon 60D - 5184x3456 - no effects applied
The error I get (option to 'Continue', but the program doesn't respond and needs to be closed):
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[..\..\Src\CutlistRenderer.cpp-717]
Error in Events panel:
An input contract violation has occurred!
I first started to get this error, while working with various media files in 1440x1080/HDV 1080i mode (Sony Z7U native)/29.97fps/1.33 sequence. Trying to understand what it goes wrong, I created a new project and recreated the adjustment layers (AL) with same effects applied - the only thing changed was the JPG added as media under both ALs. Same debug errors every time the blending is changed from normal to any other blending mode. With normal blending on the AL above, everything is fine.
After further testing, it looks like even with only one AL (no effects) above the JPG, get the same debug error when blending is changed from normal to any other mode.
Important note: Same layer+effect configuration applied in 1920x1080/ARRI Cinema mode/24fps/1.0 sequence - it works with no debug error. Haven't tried any other editing modes yet.
Layers, in order from top:
- AL (Venetian Blinds, Tint, Offset, Turbulent Displace - Color Dodge blending)
- AL (Venetian Blinds, Tint, Offset, Turbulent Displace - Normal blending)
- AL (Timecode effect)
- Title
- media, MPEG (1440x1080, 29.97 frame rate, 1.3333 pixel aspect ratio)
- After Effects composition (dynamic link) 1920x1080 - content: media file, MPEG (640x480, 30fps, 1.0 + various titles and effects, including color dodge blending
I googled for similar error reports, there are none related to Premiere Pro.
I don't know what else to do, rather than just avoid using this effect configuration.
Does anyone else had this issue, even in different situations?
Thank you very much for any feedback.
Best,
Mark
Hardware:
HP Z820
Dual Xeon E5-2643 - driver 6.1.7600.16385
Dual nVidia Quadro 4000 - driver 8.17.12.7628
64GB RAM
SSD 250GB for System
HDD 3TB for Media
Software (up to date):
Adobe Premiere Pro CS6 - Version 6.0.3 (001 (MC: 264587))
Windows 7 x64 - 6.1.7601 Service Pack 1 Build 7601

I've never seen that error myself. If you have a way to avoid it, might be best to just do that.

Similar Messages

Changing blend mode changes behavior

I'm trying to have words grow from very small to "swallow up" the screen—all while using them as stencils through which we see water. With me so far? Anyway, the motion is perfect when the blend mode is on normal, but when I simply change the blend mode to Stencil Alpha, at a certain point, it starts moving sharply to the right. All I've done is change blending modes, honest.
Who knows what the h-e-double hockey sticks this is, and, how to fix it? This is maddening.

Heya,
This is just a guess, as I haven't seen your project, but I think the text is sliding because it is too large for your GPU, so it's getting cropped and recentered.
Why is it happening when you change the blend mode? Good question. I think it's because picking any blend mode but 'Normal' is causing a pre-comp, and since your GPU's size limit is being exceeded, it's cropping (and recentering) the result. Or maybe it's a bug.
Here's a workaround to try: nest the text in its own layer, enable Fixed Resolution for the layer (found in the Layer tab in the Inspector, when the layer is selected), and then change the blend mode of the layer to whatever you want.
Seriously, though, you really should be using (as Patrick suggested) the Image Mask tool, instead of the Stencil Alpha blend mode. Free yourself from the AE-style blend mode tyranny! Vive la image mask!
(good luck)

Changing blend mode while PS is applying a filter makes layer "invisible".

Came across this by chance.
I applied a D&S filter and, while PS was busy "calculating", I hit Shift-Opt-K, to set blend mode "darken".
That did set the blens mode, but also somehow made the layer have no effect. Going back in history to before the "Change blend mode" and re-doing it worked.
Screenshots:
Layer has no effect:
Stepping back, still nothing:
On step further back in history; works as expected.
Apply blend mode "Darken" again. Now it works:

I was able to reproduce this in CS6 and CS5.
Thanks for the report!

UNCAUGHT_EXCEPTION runtime errors when changing the PO

Hi everyone,
We are facing the problem which is when changing the PO short dump UNCAUGHT_EXCEPTION is occurred then it will display "The page cannot be displayed"
I don't know what is the exactly that cause of this problem
Anyone who facing the same problem before, pls help on this. Hope anyone can help us on this.
Thanks,
quare

Hi Disha,
I found that only this PO cannot be change. Others are ok. There is an error in ST22 which is as below:
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_BBP_PD_ABORT
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
     caught,
    which led to a runtime error.
    The reason for this exception is:
    Übernehmen
After further search of error there is also message that relates to this error:
Buffer table not up to date
Message no. BBP_PD001
Diagnosis
In FORM CHANGE_VERSION_MAP_ORG (function group SAPLBBP_PDCV) an inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS message.
To analyze the error, you can set a breakpoint in the function module 'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.
I wondering what is the problem. Since it occurs not for all PO but certain PO only.
Please help.
Thanks,
quare

Inbound Processing : Error when changing a BOM

Hi Experts,
I have the following error when I send a BOMMAT IDoc in "Change" Mode (Editing the BOM, to recreate the History inthe Target system) :
Start processing in API: CSAP_MAT_BOM_MAINTAIN
Group BOM
Changes to the BOM exist after 03.11.2008
Date 03.11.2008 copied from change number
Item (1) 0040 L 000000001084237016 000000000000000000000000 cannot be uniquely identified
Item (3) 0100 L 000000001084237021 000000000000000000000000 cannot be uniquely identified
Item (6) 0200 L 000000000768041196 000000000000000000000000 cannot be uniquely identified
End of processing in API: CSAP_MAT_BOM_MAINTAIN
Any idea ?
Regards,
David

Hi Gordon,
I think I found something.
When I create a BOM with ALE in the Target, no problem. Then when I want to update it, I've got this error ...
In the Source, we're working with Text Object for Text Item (INCLUDE Text ID). But in the Target, Text Object doesn't exist, and when we update or modify the BOM via ALE, the Inbound Process try to find the old Text Object before updating it with the new one ...
I think the solution is to create all Text Object/ID (Ta SO10) in the Target ... I don't understand why the ALE Inbound Process doesn't create Text Objects if they don't exist...
Regards,
David

Satellite M40: Graphic Errors when changing screen resolution

Hi,
I have a Satellite M40 and a big problem.
in windows xp pro sp2:
when a program changes the screen resolution, the screen gets messed up,
I see only stripes and only a restart can get it back working (or suspend to disk).
[edit]
I plugged an external monitor to the laptop and it works,
the laptop screen is full of lines and the 2nd monitor shows what the laptop screen should normally also show
[/edit]
in linux:
this can be also seen when changing from the xwindow mode in linux back to tty(1-6)
Here are some pictures of this strange behavior:
http://www.ronnylindner.de/extern/images/toshiba/screen1.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen2.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen3.jpg
It looks like a hardware problem, but could it be just a wrong bios setting?
What can I do?
Bye and thanks in advance, Ronny
Message was edited by: [email protected]_DE

I will try it with the Toshiba graphics driver, at the moment I use the newest Omega driver
I use 1280x800 as normal resolution
programs giving this error:
world of warcraft (1024x768) -> working with 1280x800
age of empires 2 (800x600)
as I said before, I get this problem also using Suse Linux when I switch from KDE to tty
thanks you too, hope we can get it working together :-)
[edit]
strange, using the Toshiba display driver I got the problem at the first try (aoe2), but now it is not reproducable :-(
[/edit]
Message was edited by: [email protected]_DE

Why do I get a program error when changing colors?

I get a 'Could not complete your request because of a program error' when I try to change colors on both the forground/background palette or from the color picker palette. Is there a patch for this?
I am using Photoshop CS6 version 13.0.1.x64

Hi. Because this forum is for beginners trying to learn the basics of Photoshop, I'm moving your question to the Photoshop General Discussion forum.

How to change blending mode on multiple layers at the same time

I'm using CS5. I have a document with about 70 layers. I would like to change the blending mode to "lighten" for each layer. Is there an easy way to do this?

Photoshop doesn't allow multiple layer editing. That's why the styles are grayed out. Only 1 layer at a time.
What version are you talking about?
CS5 definitely let’s one apply a Style to multiple Layers.
rfcommagere, I don’t know how to make it much clearer:
• set the Blending Mode on one Layer
• with that Layer selected create a Style with »Include Layer Blending Options« checked
• select all other Layers that should have that Blending Mode
• click the Style in the Styles Panel

Error when executing CPACache mode = full

Hi,
I had error, when executing this CPACache mode = full and delta, I am using this link below:
http://demokl:50100/CPACache/refresh?mode=full.
Full :
Error message =
<?xml version="1.0" encoding="UTF-8" ?>
- <CacheRefreshError>
<EngineType>AE</EngineType>
<EngineName>af.px6.demokl</EngineName>
<RefreshMode>F</RefreshMode>
- <GlobalError>
<Message>Couldn't parse Configuration Data cache update XML string from Directory.</Message>
<Trace>org.xml.sax.SAXException: JavaErrors Tag found in cache update XML. at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataSAXHandler.startElement(DirectoryDataSAXHandler.java:148) at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.startElementEnd(SAXDocHandler.java:146) at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1814) at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440) at
Delta :
<?xml version="1.0" encoding="UTF-8" ?>
- <CacheRefreshError>
<EngineType>AE</EngineType>
<EngineName>af.px6.demokl</EngineName>
<RefreshMode>C</RefreshMode>
- <GlobalError>
<Message>CPA Cache not updated with directory data.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Couldn't open Directory URL (http://demokl:50100/dir/hmi_cache_refresh_service/ext?method=CacheRefresh&mode=C&consumer=af.px6.demokl), due to: HTTP 503: Service Unavailable at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDataFromDirectory(DirectoryAccess.java:382) at
</Trace>
</GlobalError>
- <GlobalError>
<Message>Confirmation handling failed.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Couldn't send confirmation, due to: Couldn't access Confirmation URL, due to: HTTP 503: Service Unavailable at
Thank you and Regards
Fernand

Hi,
I already using user PIDIRUSER to execute CPACache full mode, but still unsuccessfull.
Hi Srinivas,
Which parameter that you mention, i couldn't find in the SXMB_ADM Integration Configuration ?
Thank you and Regards
Fernand

Error when changing the length of IO

Hi Experts,
I have changed the length of one of my Info-Object from NUMC-2 to NUMC-3. While trying to activate it it is giving the error "Structure Change at field Level(change Table)".
But When i changed the length of one more IO before from Char-1 to Char-3, it successfully got activated.
Please help me out.
Regards,
Pavan

Hi Ananda,
We cannot delete the master data.
Can Anyone pleasetell me why this IO is not getting activated when i change length from NUMC2 to NUMC3
I didn't face any problem when i changed the length of one of my IO from Char-1 to Char-3. It successfully got activated
But im facing this problem when I try to change the length of another IO from NUMC-2 to NUMC-3.
If anyone any any solution for this otherthan deleting the existing data, please do let me know.
Regards,
Pavan

Facing an error when change the sysadmin password

hi expert,
when i am going to change the sysadmin password i m facing the below error on linux in production environment. i cant understand why this error occured. i change the sysadmin password many times but never get any error. when going to change the sysadmin password the production instance is open.
[applprod@oracleerp ~]$ FNDCPASS apps/apps 0 Y system/manager USER SYSADMIN sys@adm!n
-bash: !n: event not found
plz suggest how can i resolve the above error.
thanks & regards
pritesh ranjan

Hi Pritesh Ranjan,
plz suggest me one thing can i change sys password directly without down the ebs application same as system user.
exp -
alter user system identified by manager;
for sys
alter user sys identified by oracle123; (in production environment without down the ebs application)
Yes, you can change without restarting the ebs application.
And your syntax seems fine.
Thanks &
Best Regards,

Changing Blend mode in Layer Style

On a Mac is there a shortcut to change the blend mode of the layer inside the Layer Style dialog box?? On a pc you can click on the blend mode menu and then once it's highlighted you can cycle through with arrow keys. I know outside of the Layer Style dialog you can Shift and + or - with the move tool, but the advantage of doing this inside of your layer style dialog is it doens't affect your history. Plus it's something I would like to be able to do with blend modes of any Layer Style effect. Thanks.

Actually no there isnt. The Option Shift Blend mode shortcuts should really work here but don't

ACS SE: Error when changing IP setting

I got this error when trying to change the IP address setting:
Error: Failed to get NIC configuration: (null) (FFFFFFFF)
My ACS SE is now not functioning because of this. Is there any way to recover besides using the Recovery CD ?

Does this happen to small number of network devices or the whole set
If the former then I found the following CDETS
CSCtw59271 Random Network Device corruption after upgrade from ACS 5.2 to 5.3
Which includes the following workaround
Symptom 1: Delete and re-add the AAA client
Symptom 2:Modify the TACACS+ shared secret of the Network Device, re-enter the same key and save the Network device.
>>>> Use case where TACACS+ was used
There are some important fixes related to upgrade issues in patch 5 and later for ACS 5.3. While these do not relate to NDs I do recommend installing this patch

Error when changing BPM: "Insufficient access privileges"

Hello, Logic Express gurus:
I am just a lowly fitness instructor trying to mix her own music (self taught DJ). When changing the BPM here's what I do:
I double click on the song track, then from the window that pops up, I click on the "Factory" pull down menu, then choose "Temp and Pitch Machine". When I change the BPM to the desired tempo and click "Process & Paste", I get the following error:
"Insufficient access privileges for operation (Result code -5000)", then another error stating:
"Error when creating temp file!"
It used to work beautifully. Can anyone assist me? Thanks.

Thanks for the reply, Matt. I tried your suggestion, but it did not make a difference in the tempo. I am bringing in MPEGs, by the way.
My method was working fine until I began getting this error message. Any further suggestions from you or anyone?

Error when changing OID instance SSL port to 636

I have OID 11.1.1.6 instance running on port 3065 for it's SSL port. I wanted to change the SSL port to 636 from the em console. When I request to change it, it says it was successful...restart the OID server. Once the OID instance is restarted and comes back up, I get an error "Failed to load server configuration" Check the Internet Directory Server logs. Possible Error: "<hostname>:636>
Do I need to run/restart other services for this change?
I also tried extending the domain and creating a new instance using the staticports.ini. I specified the SSL port in there at 636 and ran the oracleRoot.sh script but get the same error when I look at it in em console.

Hey,
1)Did you follow these steps 'Configuring Ssl by Fusion Middleware Control'?
Link: http://docs.oracle.com/cd/E14571_01/oid.1111/e10029/ssl.htm#CHDJHGGC
Also,
2)When you type from command line: opmnctl status -l , what ports OID is showing to you?
If 1) did not resolve your issue, can you pls provide oid logs that you are receiving?
I hope this helps,
Thiago Leoncio.

Debug error when changing blending modes

Similar Messages

Maybe you are looking for