Flex builder for 64-bit vista

Hey,
Flex Builder (Eclipse) is bugging quite a lot in vista 64-bit, for example some of the views in propertise won't show, is there something I can do to get this fixed?

These links may help you out:
http://www.madvertices.com/2009/04/flex-3-vista-64-bit.html
http://www.deitte.com/archives/2008/10/how_do_you_spee.htm
http://forums.adobe.com/thread/427198
If this post helps, please mark it as such.

Similar Messages

Creating a project in Flex Builder for the Hybrid Store sample Application

Hi all,
How to create a project in Flexbuilder for the hybrid store
sample application.
I downloaded the source code of hybridstore application,
Now i have to create a project for it to run that application
in my system,
will you please tell me how to create a project for this
sample.
I have also read the readme.html file. but i could not follow
exactly what they are saying.
what i did is, I unzipped the source code into a folder
hybridstore.
I opened the flexbuilder : File -- new -- flexproject ( i
have selected) then i have given name to my file (hybridstore) ,
and set the path to the hybridstore folder where the source code
exists.
but it as created hybridstore.mxml file also.
it is not working.
will you please till me how to create project for this
application.
I have created project for other samples like restaurent
finder, dashboard. they are working fine.
I got problem with this sample only.
Thanks in advance
Regards
Avanthika

Hi,
thanks for your reply,
I have tried to open using file import, but still it is not
working.
in the readme file for this application , contains how to
Creating a project in Flex Builder for the Hybrid Store
application:
Name your default application catalog.mxml.
Prevent Flex Builder from generating an HTML wrapper: select
Project > Properties. Select the Flex Compiler page, deselect
the Generate HTML wrapper file option .
Create a Run configuration for your project but deselect the
Use defaults option and instead assign the Run setting to the
hybridstore.html in your project's bin directory.
To enable debugging of the Hybrid Store application you must
create a copy of hybridstore.html. Open it in an editor (you can
right-click on the file and select Open With > Text Editor).
Find the line that says "src", "catalog" and change it to "src",
"catalog-debug". Assign the Debug setting to this new HTML file.
As i am new to flex , i could not know how to do this.
please help me how to do this.
regards
Avanthika

Flex Builder for Linux will need his companion Thermo

I’ve been developing in Flex for a long time now. My
main work is in the design area although I do a lot of coding. The
Flex Builder Linux testing is being quite difficult, since the
layout design view is not enabled yet. So we need a lot of
imagination and a little bit of experience in AS3 and MXML tag
codding.
As a designer (and developer  ) I would like to ask
for a Thermo for Linux. It’s just a request, but I think
there are a lot of guys that share my opinion.
Thanks,

Hi, thanks for your answer.
It turned out the problem was related to the *standalone* flashplayer.
This is located in linux in:
FLEX_BUILDER_INSTALL_PREFIX/Player/linux
when I was clicking on the "Run" button Flex Builder was looking for a flashplayer standalone app, and was failing to find it.
What I had to do was to add the complete the flashplayer path to the PATH used by eclipse.
Now clicking on "Run" it compiles the application and launches the standalone player with the generated swf file.
Now I wonder if there is some way to select the flashplayer to launch, and if it is possible to configure eclipse to make it launch a browser or a custom script rather than execute that swf with the standalone player.
Thanks, regards.

Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

There is an issue with the 64 bit Vista, Windows 7 and Windows 8 or 8.1 drivers that causes the spooler to crash with the following HP Deskjet printers:
Deskjet 710
Deskjet 712
Deskjet 720
Deskjet 722
Deskjet 810
Deskjet 812
Deskjet 820
Deskjet 822
Deskjet 1000
The attached file contains a patch for this issue for Vista and Windows 7.
[The patch does not currently work for Windows 8 or 8.1 x64 systems. There are some efforts to address this, if a solution is developed it will be posted here. {Edit - I have not made any progress in getting the patch to work in Windows 8 x64.}]
First make sure the driver for the printer is installed. If the driver has not been installed go to Start, Devices and Printers, Add a Printer, Local Printer, choose the proper port (for USB-Parallel converters the port will likely be USB001: or perhaps USB002: ), Next, click Windows Update then choose HP for the manufacturer and select the appropriate printer.
Apply the patch as follows: Log into the computer with an administrative account. Download the patch by clicking on this link or on the paper clip at the end of this post. Save the patch file to your computer, then unzip it. Next copy the three DLL files to the following directory: %windir%\system32\spool\drivers\x64\3
Note that %windir% is a system variable that points to the location of the Windows directory. For most systems this will be C:\Windows. You can click Start, Computer and type %windir%\system32\spool\drivers\x64\3 in the address bar and it will find the right place.
This can be done from a DOS prompt if DOS is opened with the "run as administrator" command, or from explorer with a copy and paste. Depending on your UAC settings you may need to provide confirmation. Also allow the current files to be overwritten if prompted.
This patch is not required and should not applied to a 32 bit version of Vista or Windows 7.
Thanks to extraordinary Microsoft engineer Alan Morris for guidance for the patch.
Update - the following are more detailed installation instructions:
Download the patch from here. Now click on the file and open it, then extract the patch to some directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative DOS prompt by clicking on Start, All Programs, Accessories, then right click on CMD.EXE and select Run as Administrator. Click in the DOS box then type the following:
MD c:\temp
CD \temp
Now extract the patch files into the c:\temp directory (extract all, chose c:\temp as the destination).
[Update - Windows security settings may prevent these files from being used, please open Computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties. If there is a message in Properties indicating the file was downloaded from the internet and may be blocked then unblock the file before proceeding.]
Next click back in the administrative DOS prompt and type the following: (stuff in green is comments, do not type them...)
DIR *.dll (this is just to verify the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others.)
Net stop spooler (makes sure the files are not in use.)
Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)
Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)
Copy hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000)
Net Start Spooler
Exit
[Edit - note that these DLL files will already be in the directory. You will get a warning asking if it is OK to overwrite the files, say "yes".]
At this point the patch is installed and ready to print.
Note that the printers here do not support USB connections, they have only parallel ports. [Edit - if your printer does have a parallel port use it, this will likely be much less problematic than using a USB-Parallel converter.] If you use a USB-parallel converter make sure it is supported in your operating system. The following posts are flagged with USB-parallel cables that are reported to work in Windows 7.   A driver is required for the USB-parallel converter in addition to the driver for the printer. For supported converters this is typically supplied automatically in Windows 7. Note: the proper port to select for the USB-Parallel converters is often USB001:. I have heard of some cases where the port was USB002: or LPT3: as well. If the port you are using does not succeed (after applying the patch) try changing the port by going to Start, Devices and Printers, right click on your printer and select Printer Properties, then click on the Ports tab.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
This question was solved.
View Solution.
Attachments:
DJ_Patch.zip ‏34 KB

Just want to send a thanks. Purchased a new HP computer with 64 bit Windows 7 and haven't been able to get my 722c to work. This patch worked like a charm!

Acrobat9 for 64 bit Vista, program locks up at Form Wizard Import, why?

I installed Acrobat 9 Pro Complete (30 day trial) Version into my 64 bit Vista PC. After doing one Acrobat program required update to Windows, the program fully installed. When I go to Form Wizard, put in the name of a pdf file to open and click NEXT the program whites out and a error box pops up: Adobe Acrobat 9.0 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Close Program." Any suggestions of what I can do? Bob--

It turned out to be a failing disk drive, the drive that had the catalog on it.
I had to set up the disk check tool, which had to be run on boot up because the disk had the user profiles on it. (explorer, right click on drive in left panel, select tools and the "check disk for errors" tool.)
It ran for several hours, but at 11% through stage 4 of 5, verifying file data, it stopped and went no further. So apparently at least one of the files couldn't be verified. Without going into detail, I was able to copy the files I needed to another drive (robocopy), swap drive letters around using diskpart and get back into operation.
So, apparently LR needs some additional error handling related to file handles. Somewhere in the initial load of a catalog a file read failed and the LR code doesn't have a handler for that kind of error. What should happen, in my opinion, is that the LR error handling should have displayed a message that indicated an unexpected hardware fault, most likely disk related and recommended I run CHKDSK on the drive where the catalog is located.

Suggestions for Flex Builder for Linux

I'm new to Flex, and I have to say that I'm enjoying it quite
a lot. I think the thing that really helps speed up development is
good tools. Flex Builder 3 for Linux makes a good start at
providing a very nice development tool, but there are a couple of
things I'd like to see different with this tool.
First off, please give me an update site to use to install
Flex Builder. I use Red Hat Developer Studio (soon to be JBoss
Developer Studio, Eclipse 3.2 based), and I can't get FB 3 Alpha
for Linux to install into it. I have been successful with base
Eclipse Europa and FB 3, but I'd like to have my IDE tools in one
frame. An update site would let me add FB 3 into any Eclipse flavor
I choose, as long as it supported the appropriate components.
Next, Design mode for FB 3 is a must. I am very functional
with the content assist features in the source editor (and they are
_quite_ good, I must say), but design view really helps me preview
changes quickly and rapidly test out UI designs. Much faster than
writing and launching over and over.
Otherwise, great work, and please get out a new release
soon!

cdelashm wrote:
> I'm new to Flex, and I have to say that I'm enjoying it
quite a lot. I think
> the thing that really helps speed up development is good
tools. Flex Builder 3
> for Linux makes a good start at providing a very nice
development tool, but
> there are a couple of things I'd like to see different
with this tool.
>
> First off, please give me an update site to use to
install Flex Builder. I
> use Red Hat Developer Studio (soon to be JBoss Developer
Studio, Eclipse 3.2
> based), and I can't get FB 3 Alpha for Linux to install
into it. I have been
> successful with base Eclipse Europa and FB 3, but I'd
like to have my IDE tools
> in one frame. An update site would let me add FB 3 into
any Eclipse flavor I
> choose, as long as it supported the appropriate
components.
>
> Next, Design mode for FB 3 is a must. I am very
functional with the content
> assist features in the source editor (and they are
_quite_ good, I must say),
> but design view really helps me preview changes quickly
and rapidly test out UI
> designs. Much faster than writing and launching over and
over.
>
> Otherwise, great work, and please get out a new release
soon!
>
>
Thank you for your valuable feedback. Can you please take 2
minutes to
log an Enhancement Bug in the bug base so we can track your
request and
work on it as we proceed.
http://bugs.adobe.com/jira
(Choose Flex Builder Linux Project)
Thanks
Arun

CS4 or FLEX Builder for AIR Application?

Hello,
I have installed CS4 and Flex builder 3. I would like to develop some desktop applications, which is the best editor to develop AIR application?
Thank you

I faced a similar choice recently: Flash or Flex for developing CS4 panels.
John Nack advised me to use Flex Builder. He was right. For a desktop AIR application or something like CS4 panels, the Flex Builder IDE is more powerful and helpful. If you're a developer familiar with other programming tool IDEs, like Microsoft Visual Studio, various Java IDEs, etc. then you will find the Flx Builder IDE to be more intuitive.
Flash is a good choice for developing animated SWF panels that are driving things like Flash movies. If you use Flash, you'll have to deal with the Timeline. With Flex Builder, you don't.
They both provide access to Action Script. But they expose functionality differently. Also, Flex Builder provides some data visualization tools, etc. that are not part of Flash.
Mitch

Wireless driver for 64-bit Vista

I have installed 64-bit Vista on my 2007 MBP (15", 2.2 Ghz) and everything is working fine except wireless.
Can someone tell me what drivers I need to install since the ones on the Snow Leopard disk don't seem to be working (bootcamp 3.0)

I was able to find drivers online.

Site links to incorrect dv5-1058tx sound driver for 32-bit vista

The IDT High-Definition Audio CODEC Driver (Version: 6.10.6087.0 C ) does not appear to work with my dv5-1058tx running windows vista business (32-bit). It gives some compatability error.
How should I proceed?

I just did the same thing 5 days ago with Vista Ultimate. All I used was the Creative CD (option B in your email). I installed that, then used autoupdate to upgrade both the software and the drivers and it worked like a champ.
my rig has:?fatalityasus p5n32-e-sli2 gig memnvidia 8800dual core 6700?

Flex Builder 3 on Vista Home Premium 64-bit

Has anyone tried Flex Builder 3 on Vista Home Premium 64-bit? Does it work? I see Vista is supported but the requirements page says nothing specifically about Flex Builder on 64-bit Vista.
I also see some older questions on the topic in the forums, but nothing recent and no complete answers.

other Vista/FB users I've talked to feel the same
Well that's always an easy one..
I talked to a million FB/Vista users and they all say it's blazing fast..
See how easy that is?
I suggest you look into optimizing your system and/or look at what might be causing this.
But all I can say is FB3 sure isn't slow.
I'm surprised it runs decent for you
Well, I'm surprised you're surpised
I still have to see a MAC outperform anything compared to my PC.

Flex Builder 2 - failed install on Windows Vista

I have tried several times to install the trial Flex Builder
2 on Windows Vista. Each time I get an error message referring me
to the error log. The error log is listed below. Note, each time I
do the install, I uninstall the previous install and then delete
any files or folders remaining.
===================================
Error Log
===================================
!SESSION 2007-02-10 22:04:25.583
eclipse.buildId=unknown
java.version=1.4.2_12
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY org.eclipse.update.configurator 2007-02-10
22:04:26.499
!MESSAGE Cannot backup current configuration
!ENTRY org.eclipse.update.configurator 2007-02-10
22:04:26.575
!MESSAGE Could not rename configuration temp file
!ENTRY org.eclipse.osgi 2007-02-10 22:04:27.389
!MESSAGE Application error
!STACK 1
java.lang.UnsatisfiedLinkError: no swt-win32-3139 in
java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at
org.eclipse.swt.internal.Library.loadLibrary(Library.java:123)
at
org.eclipse.swt.internal.win32.OS.<clinit>(OS.java:18)
at
org.eclipse.swt.widgets.Display.<clinit>(Display.java:125)
at
org.eclipse.ui.internal.Workbench.createDisplay(Workbench.java:381)
at
org.eclipse.ui.PlatformUI.createDisplay(PlatformUI.java:155)
at
com.adobe.flexbuilder.standalone.FlexBuilderApplication.run(FlexBuilderApplication.java:4 5)
at
org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at
org.eclipse.core.launcher.Main.invokeFramework(Main.java:334)
at org.eclipse.core.launcher.Main.basicRun(Main.java:278)
at org.eclipse.core.launcher.Main.run(Main.java:973)
at org.eclipse.core.launcher.Main.main(Main.java:948)
!ENTRY org.eclipse.osgi 2007-02-10 22:04:27.396
!MESSAGE Bundle
update@plugins/com.adobe.flexbuilder.debug.e32_2.0.155577/ [70] was
not resolved.
!SUBENTRY 1 org.eclipse.osgi 2007-02-10 22:04:27.396
!MESSAGE Missing required bundle
org.eclipse.debug.ui_[3.2.0,99.0.0).
!SESSION 2007-02-10 22:15:47.733
eclipse.buildId=unknown
java.version=1.4.2_12
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY org.eclipse.update.configurator 2007-02-10
22:15:48.505
!MESSAGE Cannot backup current configuration
======================================================
Any help would be appreciated.
Thanks,
Wayne

Thank you for your response. Being a newbie to Microsoft
Vista (which I recommend the world to reject) I don't know exactly
how to describe how I got the install of Flex Builder 2 to work.
But, a friend of mine walked me through turning off the Windows
Defender security settings as well as all security settings related
to my user's setting. I believe I disabled two Vista "features",
and then the install worked. The only thing was that the checkboxes
during the install program did not appear, but clicking the
respective questions themselves did the trick (i.e. do you agree to
software license?' and 'install Flash player on IE / Firefox?')
Sorry I can't be more specific... but, for anyone that has
this problem, in the words of my friend, "Turn everything off in
Vista you can, then try it!".
Good luck,
-sutton

Flex 4.5 build for ios

HI,
Right at the beginning of my flex journey and so I'm using examples to see how stuff is done.
I have done the recent adobe flash builder update and can make simple flex builds for ios, google android and blackberry. Cool.
I have sourced a demo flex 4.5 project that was done for android (I think before the update) but when I go to do a build for ios
the option on the drop down is not there (just has google, no ios or blackberry) So I guess the project thinks its in pre-update mode
So the question is, what is causing the drop down to only have google, is there some library/framework/script I need to add or something
so this demo flex project that was writen for android can be tested on ios.
hope this makes sense!
thanks
mike

OK
I found it project>properties add a device
KBn

Flex builder plugin for Eclipse

Hi,
I downloaded flash builder and tried some examples. flash builder is comercial one.
For that reason i am trying to configure flex builder as a eclipse plugin.
Flex builder for eclipse plugin is open source/ it is also comercial?
Please share me the knowledge for successful confiuration of Flexbuilder with Eclipse.
Thanks in Advance.

Hi,
Please go through these links.
1) http://www.darronschall.com/weblog/2005/08/setting-up-eclipse-for-flex.cfm
2) http://www.seanhsmith.com/2010/03/29/flex-for-free-setting-up-the-flex-4-sdk-with-eclipse- ide/
3) http://livedocs.adobe.com/flex/3/html/help.html?content=overview_4.html
Thanks and Regards,
Vibhuti Gosavi | [email protected] | www.infocepts.com

How to integrate a flex build in a web application running on jBoss 5.1

Hi,
I have two flex builds for a messaging application that I have to integrate with my web application running on Jboss 5.1 . I have tried hot deploying the builds into the default deploy folder of Jboss,but that approach doesn't seem to work(maybe because I may need to make war out of the flex builds). Can someone tell me an approach of how to accomplish this. Can I leverage BLAZEDS for this purpose.
Thanks
Rohit Kumar

Hi,
Go through Re: Web Dynpro and Smart Forms.
Regards,
Satyajit.

Getting started with Flex Builder, BlazeDS and Eclipse

Hi,
I'm a java developer looking at RIA for the first time. I'm really excited about BlazeDS and object remoting, but I can't get a working dev environment together. I'm assuming I should use Flex Builder for the client code, Eclipse Europa for the java webapp code, and deploy from both IDEs into the BlazeDS-equipped turnkey-Tomcat. I haven't found a tutorial explaining how to deploy a new webapp with this setup.
The turnkey-Tomcat sample app works fine. Trouble starts when I try to create a new project in Flex Builder. I don't understand the 'debug' deployment that Flex Builder does. Why are there 2 versions of my app, the regular and the debug versions? What is exactly the project structure that I'm supposed to have in Tomcat?
The specific error I encounter when trying to deploy a new Flex project is this:
[MessagingError message='Destination 'productService' either does not exist or the destination has no channels defined (and the application does not define any default channels.)']
I do have a default channel configured for my environment in services-config:
And I do have a valid destination configured in remoting-config (I'm mostly interested in object remoting):
test.ProductService
Here's the client code:
What am I doing wrong? Where can I get help on these specific topics? Also, does anyone have an Ant build file that would automate this sort of deployment?
Thanks!

Hi Peter, I don't have problems passing JavaBeans to Flex. For collections, I used DataGrid, it displayed my collection seamlessly, except I don't get column headers, just a column index number. For receiving a single JavaBean, I had a little more trouble, until I tried to display it with a DataGrid: it displayed a single row that represented my data, with each java property name used as a column header, and object attributes were displayed as 'object'. These 2 experiences led me to these conclusions: - for the collection, Flex converted each element into an ordered list of attributes - for the single bean, Flex converted it into a hierarchy of Maps of attributes I didn't create a Flex value object. Flex is doing it automatically,very much like in JavaScript/JSON: dynamic objects. Here's the remote object markup:  <mx:RemoteObject id="myRemoteObject" destination="productService" fault="Alert.show(event.fault.faultString, 'Error');"> <mx:method name="getProductsCount" result="setProductsCount(event)"> <mx:arguments> <arg1>{productSC}</arg1> </mx:arguments> </mx:method> <mx:method name="getProducts">  <mx:arguments> <arg1>{productSC}</arg1>  <arg2>{pager.pageSize}</arg2> <arg3>{pager.currentPage}</arg3> </mx:arguments> </mx:method> <mx:method name="getProduct" result="goToView()">  <mx:arguments> <arg1>{selectedRecordId}</arg1> </mx:arguments> </mx:method> </mx:RemoteObject> And here's the dataGrid that displays the bean collection: <mx:DataGrid id="myDataGrid" dataProvider="{myRemoteObject.getProducts.lastResult}" change="selectRecord();" width="100%" height="100%" > </mx:DataGrid> Let me know how it goes, I'd be glad to assist if I can. Miguel

Flex builder for 64-bit vista

Similar Messages

Maybe you are looking for