Flexibility with Enterprise SOA - script issue

Hi All,
I have a Discovery System v3 system and I am testing the "Flexibility with Enterprise SOA" out-of-the-box script. On page 10 of the script it instructs you to run trans SPROXY and then select Software Component u201CESA ECC-SE 600u201D. I donu2019t see ESA ECC-SE 600 listed. Since this system is v3 the ECC system has EHP 2 installed so the version of ECC-SE installed is 602 but I donu2019t even see this version either. Any ideas why I don't see ESA ECC-SE listed? The version of the script is v2. Is this maybe the problem since the system version is v3? Should the v2 script still be vvalid for a v3 system?
Thanks,
Bill

Hi Bill,
I can't tell you why the SC's are not listed anymore as they are part of all delivered systems, but this exercise works with ECC SE 602 as well.
Best regards,
Peder

Similar Messages

This Forum to Mege Next Week with Enterprise SOA!

Hi ES Workplace Forum Members,
We wanted to inform you that next week this forum will be merged with the Enterprise SOA Forum (located in the Enterprise SOA category).
All the threads found here will then be found there.
A new sticky thread (on top) will be opened there for specific ES Workplace comments.
Regards,
The Community Team

iPads natively print to printers that are air print enabled.
About AirPrint - Apple Support
has a list of printer models
I wouldn't count on using air print simply because it's limited to certain manufacturers and models
Printer companies can have apps of their own (must be a wifi printer though), or can have work arounds of their own.
There are also third party printing apps out there. I used print n share but there are others.
However all apps are skinnied down versions of computer programs so if there's any formatting you may have issues replicating it.
I think the safest bet is to carry a flash drive or e-mail that file to someone and have them print it for you.

Newbie here, with button action script issue

I have just started to scrach the surface with actionscript
and I have attempted to assign it to buttons. Much to my supprise,
it worked, sort of... All my buttons require a double click the
first time you click on them. I was able to put
this together, by
using the following action script for all my buttons:
on (release) {
ybutton.onRelease = function() {
gotoAndStop(28);
So I have 2 questions. What actionscript will give me the
single click that I am looking for? Also, is there any shortcut to
making a broad change? In other words, will have to switch out the
code for every button on 37 frames?
Thank you

1: // You needed two clicks because you have 2 onRelease.
on (release) {
gotoAndStop(28);
2: Yes, it'll go fast I would copy the above and paste where
needed then just change the frame #.

Facing Issue With Oracle SOA Suite 11.1.1.3.0

Hi All,
I am facing some issues with ORACLE SOA SUITE 11.1.1.3.0.
Hope you people can help us out.
Please find the issue details below along with all the relevant information’s
I have following SOA suite installation at my server:
Oracle 10g Express Edition Universal 10.2.0.1
RCU 11.1.1.3.3
Web Logic Server 10.3.3.0
SOA suite 11.1.1.3.0
JDeveloper 11.1.1.3.0
The first thing what I have done is created a web service and deployed it to server without any issue.
After that I created proxy client for that service and accessed it successfully from the client end.
Till here no issue occurs.
After that I applied few policies on top of web service and deployed it to server.
The policy I had chosen was “oracle/wss_username_token_service_policy” [coming under OWSM policies list]
While deploying there was no issue, all went well.
2nd step I had created client using “oracle/wss_username_token_client_policy” policy which is counter part of above policy and tried to access the web service but failed.
I have followed this blog:
[http://biemond.blogspot.com/2010/08/things-you-need-to-do-for-owsm-11g.html ]
Please have a look on service and client code:
Service Code:
package Demo_ScoreCard;
import javax.jws.WebService;
import weblogic.wsee.jws.jaxws.owsm.SecurityPolicy;
@WebService
@SecurityPolicy(uri = "oracle/wss_username_token_service_policy")
public class ScoreCardWithPolicy {
public double getPercentageWithPolicy(double markEng,double markMath,double markHindi,double markScience,double markSsc)
double result;
result= ((markEng+markHindi+markMath+markScience+markSsc)/500)*100;
return result;
Client Code:
package com.tec.proxy.client;
import java.util.Map;
import javax.xml.ws.BindingProvider;
import javax.xml.ws.WebServiceRef;
import weblogic.wsee.jws.jaxws.owsm.SecurityPolicyFeature;
public class ScoreCardWithPolicyPortClient {
@WebServiceRef
private static ScoreCardWithPolicyService scoreCardWithPolicyService;
public static void main(String[] args) {
scoreCardWithPolicyService = new ScoreCardWithPolicyService();
SecurityPolicyFeature[] securityFeatures =new SecurityPolicyFeature[] { new SecurityPolicyFeature("oracle/wss_http_token_client_policy") };
ScoreCardWithPolicy scoreCardWithPolicy =scoreCardWithPolicyService.getScoreCardWithPolicyPort(securityFeatures);
Map<String, Object> reqContext =((BindingProvider)scoreCardWithPolicy).getRequestContext();
reqContext.put(BindingProvider.USERNAME_PROPERTY, "testclient");
reqContext.put(BindingProvider.PASSWORD_PROPERTY, "test12345"); // I have added this to the myrealm from console under security realms
double arg1 = 77.2;
double arg2 = 79.2;
double arg3 = 77.2;
double arg4 = 76.2;
double arg5 = 67.2;
double clientResult =scoreCardWithPolicy.getPercentageWithPolicy(arg1, arg2, arg3, arg4,arg5);
System.out.println("clientResult with policy =====> " + clientResult);
Error Log:
SEVERE: WSM-07617 Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
SEVERE: WSMAgentHook: An Exception is thrown: WSM-07617 Policy Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
Exception in thread "main" javax.xml.rpc.JAXRPCException: oracle.wsm.common.sdk.WSMException: WSM-07617 Policy Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
at oracle.wsm.agent.handler.wls.WSMAgentHook.handleException(WSMAgentHook.java:395)
at oracle.wsm.agent.handler.wls.WSMAgentHook.init(WSMAgentHook.java:206)
at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory.newHandler(TubeFactory.java:105)
at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory.createClient(TubeFactory.java:68)
at weblogic.wsee.jaxws.WLSTubelineAssemblerFactory$TubelineAssemblerImpl.createClient(WLSTubelineAssemblerFactory.java:148)
at com.sun.xml.ws.client.WSServiceDelegate.createPipeline(WSServiceDelegate.java:467)
at com.sun.xml.ws.client.WSServiceDelegate.getStubHandler(WSServiceDelegate.java:689)
at com.sun.xml.ws.client.WSServiceDelegate.createEndpointIFBaseProxy(WSServiceDelegate.java:667)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:362)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.internalGetPort(WLSProvider.java:855)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate$PortClientInstanceFactory.createClientInstance(WLSProvider.java:967)
at weblogic.wsee.jaxws.spi.ClientInstancePool.takeSimpleClientInstance(ClientInstancePool.java:621)
at weblogic.wsee.jaxws.spi.ClientInstancePool.take(ClientInstancePool.java:486)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.getPort(WLSProvider.java:782)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:344)
at javax.xml.ws.Service.getPort(Service.java:133)
at com.tec.proxy.client.ScoreCardWithPolicyService.getScoreCardWithPolicyPort(ScoreCardWithPolicyService.java:86)
at com.tec.proxy.client.ScoreCardWithPolicyPortClient.main(ScoreCardWithPolicyPortClient.java:23)
Process exited with exit code 1.
Not getting any help from any blog. Just wondering why this error is coming. I would be glad if you can help us in this regard.
Apart from above issue I have few queries like:
1.What is difference between OWSM policies and WLS policies?
2.Are these the only policies we can apply on top of services?
3.If some one wants to configure his own custom policies than what need to be done
4.Could anyone please provide some useful links to implement ENCYPTION and SIGNATURE on top of web services?
5.And If I am not wrong, I guess Oracle Service BUS OSB 11.1.1.3 has been removed from the main download link and version 11.1.1.4 has been provided. Is it
compatible with SOA suite 11.1.1.3.0? If not where can I get OSB 11.1.1.3?
Looking forward to hear from you people.
Thanks
Arvind
Edited by: user8490871 on Apr 15, 2011 12:53 AM
Edited by: user8490871 on Apr 15, 2011 12:53 AM

Hi,
I don't know why u get an error. Here are answers for additional questions:
1. OWSM policies are for web services. WLS policies are based on Java EE security. They are used to protect resources e.g. URL, EJB
2. I don't know about other policies
3. See http://download.oracle.com/docs/cd/E14571_01/web.1111/e13713/owsm_appendix.htm#CHDCHFBH
4. See http://download.oracle.com/docs/cd/E14571_01/security.1111/e10037/toc.htm
5. I can see OSB 11.1.1.3 download link here
http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
Regards,
Milan

Is there an issue with modifying a prototype file with a preinstall script?

Solaris Packaging content
I have a prototype file in which I need to move a specific directory to somewhere else other than the BASEDIR.
I am attempting to do this with a preinstall script by running my prototype file through sed and creating a new prototype file where specific entries that match the various regexp entries in the sed command now have a alternate path assigned to it.
For example:
Original prototype file entry:
d none <directory 1>/lib 0755 root other
Output prototype from preinstall execution:
d none <directory 1>/lib=<directory 2>/lib 0755 root other
However, even though I can go into /var/sadm/pkg/<PKG NAME>/install and execute the preinstall by hand properly, I get the following:
pkgadd: ERROR: preinstall script did not complete successfully
Any ideas here? Manually editing the prototype file before pkgmk and pkgtrans is not possible with how my package is being created due to an automated process, however I would really like to leverage the functionality of the prototype file for pkgrm's instead of moving them in a postinstall script and then removing each in a postremove script.

I don't see any issue in downloading the static copy. Even if you were allowed to connect to the wsdl directly or add it as a service reference in Visual Studio then you would have to manually update that reference. In closing, you aren't losing
any functionality by downloading the static copy.
Thanks,
Follow my FIM blog at: http://forefrontidm.wordpress.com/

Issue with Generate Create Script in new ODT 11.1.0.6.10 beta

I've tried this on several tables in my database. I choose Generate Script to ... a file, for a given table it gives me the error message "An error occurred while writing to fil: \nValue was either too large or too smal for an Int32."
(It doesn't matter if I'm in a Oracle database project or some other project.)
Trying to Generate Script To Project... when I'm in a Oracle Database Project, Visual Studio (2005) crashes. It appears to be some overflow exception according to crashinfo:
EventType : clr20r3 P1 : devenv.exe P2 : 8.0.50727.762 P3 : 45716759
P4 : mscorlib P5 : 2.0.0.0 P6 : 461eee3d P7 : 407b P8 : a3
P9 : system.overflowexception
(With ODT 11.1.0.5.10 beta it worked fine dispite the issue discussed in thread: Re: Issue with Generate Create Script in new ODT 11.1.0.5.10 beta
/Tomas

Tried to debug this error and got these exception details. Hope it helps!
/Tomas
System.OverflowException was unhandled
Message="Value was either too large or too small for an Int32."
Source="mscorlib"
StackTrace:
Server stack trace:
at System.Decimal.ToInt32(Decimal d)
at System.Decimal.op_Explicit(Decimal value)
at Oracle.Management.Omo.TableSpaceQuotaDetails.FillTableSpaceQuota(OracleDataReader reader)
at Oracle.Management.Omo.User.FillTableSpaceQuotas(OracleDataReader reader)
at Oracle.Management.Omo.Connection.GetUserCollection(Boolean refresh)
at Oracle.Management.Omo.Connection.GetUsers(Boolean refresh)
at Oracle.Management.Omo.TableSQLGenerator.GetCreateSQLs(OmoObject obj, ArrayList& typeAndNames, Boolean checkRequired, Boolean appendSchemaName)
at Oracle.Management.Omo.TableViewBase.GetCreateSQLs(Boolean appendSchemaName)
at Oracle.VsDevTools.OracleUILDBProjectServices.GenerateCreateScript(OracleUILConnCtx connCtx, String[] objectNames, String objectOwner, OracleUILObjectType objectType)
at Oracle.VsDevTools.OracleUILDBProjectServices.GenerateCreateScriptAsyncMethod(IntPtr ppvObj, OracleUILConnCtx connCtx, String[] objectNames, String objectOwner, OracleUILObjectType objectType, ICollection& scriptText)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(RuntimeMethodHandle md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
at Oracle.VsDevTools.OracleUILDBProjectServices.GenerateScriptAsyncMethodDelegate.EndInvoke(ICollection& scriptText, IAsyncResult result)
at Oracle.VsDevTools.OracleUILDBProjectServices.OnGenerateScriptAsyncCompletion(IAsyncResult ar)
at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)

I've used for months but am now so frustrated with the script issue I have uninstalled until I get some resolution. Help?

I've to change the 10 to 20 solution to help solve the unresponsive script issue. I've tried safe mode. I've tried disabling all add-ons but still have it hang up. I don't seem to face that issue with explorer. Is microsoft sabotaging your efforts?

Did you also try to disable all plugins?
See [[Troubleshooting plugins]]
Create a new profile as a test to check if your current profile is causing the problems<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br />
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Issue with running a script in Oracle test manager

Tool - Open Script 9.0.1 , OTM
Hi All
I am facing issue while executing a open script with Oracle Test Manager , I have a script which was made with open script 9.0.1 and which is running very fine with the Open Script UI ,
problem occurs once I am trying to run this with OTM.Issue looks that playback was so fast in OTM so that script was not able to recognize some of the objects.
Is there anyway so that I can control the speed of playback at any particular step when I am using OTM
Thanks

Hi Kumar,
Regarding your query below is the suggestion:
You have to configure the job server with the repository. While configuring the adapter, you have to configure the job server in management console also..
Still if you are facing issue then please share Job Server logs available in BODS Job Server Folder and error screenshot to debug the issue.
Thanks,
Daya

Issue with executing diff scripts.

Hi,
I have an sql file which we run thru sqlplus. The file has list of scripts to be compiled. Now based on environment i wanna choose which script to be compiled. How should i achieve that?
schema_changes.sql file
def dw_user =&1
def env =&2
alter session set current_schema=&dw_user._staging;
@EDW/dbscripts/DW/SCHEMA/BUILD_DW_SCHEMA.SQL
@EDW/dbscripts/DW/SCHEMA/BUILD_DW_SCHEMA_QA.SQL
@EDW/dbscripts/DW/SCHEMA/STAGING_TRG.SQL
/If the user inputs env as QA, it should compile BUILD_DW_SCHEMA_QA.SQL or else it should compile BUILD_DW_SCHEMA.SQL. I'm not sure SQL block IF END IF will do as we have to have to execute scripts kept on server. Please advice.
Will the below work:
def dw_user =&1
def env =&2
alter session set current_schema=&dw_user._staging;
BEGIN
IF (env = 'QA') then
@EDW/dbscripts/DW/SCHEMA/BUILD_DW_SCHEMA_QA.SQL
ELSE
@EDW/dbscripts/DW/SCHEMA/BUILD_DW_SCHEMA_QA.SQL
END IF;
END;
@EDW/dbscripts/DW/SCHEMA/STAGING_TRG.SQL
/

GR wrote:
Hi,
I have an sql file which we run thru sqlplus. The file has list of scripts to be compiled. Now based on environment i wanna choose which script to be compiled. How should i achieve that?
schema_changes.sql file
def dw_user =&1
def env =&2
alter session set current_schema=&dw_user._staging;
@EDW/dbscripts/DW/SCHEMA/BUILD_DW_SCHEMA.SQL
@EDW/dbscripts/DW/SCHEMA/BUILD_DW_SCHEMA_QA.SQL
@EDW/dbscripts/DW/SCHEMA/STAGING_TRG.SQL
/If the user inputs env as QA, it should compile BUILD_DW_SCHEMA_QA.SQL or else it should compile BUILD_DW_SCHEMA.SQL. I'm not sure SQL block IF END IF will do as we have to have to execute scripts kept on server. Please advice.
Will the below work:
def dw_user =&1
def env =&2
alter session set current_schema=&dw_user._staging;
BEGIN
IF (env = 'QA') then
@EDW/dbscripts/DW/SCHEMA/BUILD_DW_SCHEMA_QA.SQL
ELSE
@EDW/dbscripts/DW/SCHEMA/BUILD_DW_SCHEMA_QA.SQL
END IF;
END;
@EDW/dbscripts/DW/SCHEMA/STAGING_TRG.SQL
No, that won't work, as you cannot embed SQL*Plus commands into the PL/SQL language, they are two seperate languages. PL/SQL does not support SQL*Plus commands.
What you are trying to achieve would be more easily implemented using operating system scripting languages, though the exact script would depend on whether you are using a Windows based o/s or Unix based o/s. The o/s script would be able to prompt for input from the user and has the ability to do conditional processing, thus you can get it to call SQL*Plus with the relevant scripts as the input.

Issue with a AA Script

Dear All,
I have a problem with auto attendant script. I have a customer who has a greeting saying Welcome to XXXX company.Please enter the desire extension at any time. or else please wait for the operator. Now they want to add an option for the user to press 1 so that the call wil be transfereed to techincal supportteam. The flow wil be like this. WElcome to XXXX company. Please enter the desire extension at any time.For techincal relted queries please press 1 or else please wait for operator. So if the user press 1 the call will go to tehnical department.
The problem is in the script once the call lands in we have configured in such a way that the system will accept the 4 digit extension and if the user dont press the 4 digit extension it will go to operator. Now if i add the option of 1 in that system is waiting for another 4 digits then it is timing out and going to operator. Is there any way to accomplish the above task. I am adding the script for your reference.

Hi,
If you're using CUE, there is a step called "Dial By Extension Menu", this should solve your problem.
If you're using UCCX (or CUE and don't have this step) you can do the following:
In the Get Digit String branch Timeout, use an If statement that check if the Number entered was "1" then Call Redirect to Technical Departement Number, else Call Redirect to Operator Extension.
It should appear like this:
Extension = Get Digit String
Timeout
    if (Extension == "1")
        True
            Call Redirect to Technical
        False
            Call Redirect to Operator
Hope This Helps,

Firefox is having "Script" issues (Not Responding) und possibly Flash issues?

Okay, downloaded Firefox for the first time in like a year yesterday. It was working beautifully, oh, how I've missed it. I hate using Google Chrome with a fiery burning passion.
However, though it was working perfectly yesterday, I have not downloaded anything or got any plug-ins/extensions, whatever.
Today, however, I can go to www.google.com (on firefox), but if I try to go to my banks website, or imvu.com, or something like that, all the sudden Firefox decides to hang. It freezes und I get that annoying "(Not Responding)" at the top. I have to close out of the browser entirely, open it up und forgo the session restore.
Some websites are okay, however, it seems many of them aren't.
I get a script error message, so far the one for imvu.com that popped up was "lookout.bluecava" or something like that. Asked if I wanted to wait for script to respond or if I wanted to stop it. Either way, it ends with me closing out und starting back at google.
Right now, to ask this question, I had to re-download google chrome, und log in from that browser since Firefox doesn't even want to support it's own support forum! Crazy stuff, right?
Anyway, since it's having a "script" issue, I went to java, made sure I had the updated java installed on my computer, then I made sure that I had the updated java plug-in. Und I even downloaded the 64bit java for it as well, both the 7u45 or whatever.
So, my java on my comp und firefox browser are seemingly up to date, und the Add-On thing for Firefox to check if plugins are up to date says they all of them are up to date.
Still having the issue. The moment I go to imvu or another site that has that issue, it freezes within 10 seconds und that's all she wrote.
So, I'm really not wanting to go back to Google Chrome for another year, I miss the hell out of Firefox.
To Add: The issue I am having right now with Firefox is the same issue I had a year ago, when I had to uninstall firefox und go with Chrome in the first place.
But, since it was acting normal yesterday when I installed it, I figured that it was fixed. Wrong in less than 24 hours.
Before I submitted this, I decided to hop back onto Firefox und try something.
I disabled the Shockwave Flash und the Shockwave Director plugins. Now, Firefox is working again.
Sooooooooooooooooooooooooooooooooo.
It asks me if I want to install the "flash" plugins needed to view some content on the page (I used imvu.com to try it out after disabling the shockwave), but still runs.
So, what do I need to do for flash? Or better yet, what's going on with it?
I downloaded the flash yesterday within half an hour of starting Firefox up after downloading it. Und it worked just fine for hours.
I shut the comp down, packed it up, went home, come back to work, hop on the net und BAM. All the sudden Shockwave is having issues with Firefox when nothing was done to instigate it? Doesn't make sense.
Other info:
Windows 7 Home Premium on HP laptop.

I will give Firefox 24.1 a try und see if shockwave flash actually works without making it hang und resulting in need of force close.

My 'run with administrative privileges' script no longer works - help

Hey all. I have an applescript that shuts down the computer that I made a while back. I pulled it out today to use it and it no longer works. Here's part of the code I'm having trouble with:
do shell script ¬
"sudo shutdown -h now" password "myadminpassword" with administrator privileges
On old machines this worked great, I would just put the admin password where myadminpassword is and it would work perfectly. Now though, I run it on my machine and I get the prompt to enter my admin username and password before it will shutdown.
Now this is going on a remote install so I need it to work. Any ideas? The machine is running snow leopard, but it seems to still work on an old leopard macbook pro.

Well, for one, do not use sudo in do shell script.
The whole 'with administrator privileges' part takes care of elevating your privileges. sudo has no place in do shell script.
Don't know if that's your issue, but it's the first thing I'd fix.
If that doesn't help, are you running the script as your admin user?
Nowhere in your script are you defining the username to run the command as, therefore it will attempt to run as the current user who may not be the same as your admin user, nor have the same password. You might need to include the username:
do shell script "shutdown -h now" user name "admin" password "myadminpassword" with administrator privileges

Recommended transition solution for ISP:s with enterprise customers?

What would be the recommended solution(s) for ISP:s with enterprises only as customers?
It both needs to support IPv6 and at the same time save IPv4 resources.
Thanks in advance!

Hi,
There are many possible choice for a soft transition of the Service Provider:
- Dual-Stack
The SP can run both protocols in the backbone for a while so he can test IPv6 Service by switching some part of the Network to IPv6 Only and see if it is OK. In case there is a problem he can get back to dual-stack, fix the issue and resume its testing until it is Ok and he can allow IPv6 Only.
- It is possible to provide IPv6 Service without upgrading the backbone to IPv6 Immediately using 6RD if the backbone is IPv4 or 6PE /6VPE (I did the dev-test for 6PE and 6VPE for CISCO for 3 years) if the backbone is IPv4/MPLS. This way the SP can start providing both IPv4 and IPv6 without upgrading the backbone. He can then move slowly to IPv6 with a Dual-Stack period not to switch immediately to IPv6 and allow to fallback if soething is not properly configured to work in IPv6 Only.
With 6VPE, the customer benefit of a dual-stack VPN and recently, CISCO has improved the Support of Multicast in MPLS which was main weakness of MPLS based solutions.
Once the SP has migrated to IPv6 Only, it is still possible to offer dual-stack, IPv4 and IPv6 service to its customers using DS-Lite or better, A+P when it will be available as A+P (dIVI-pd based) does not rely on CGN which has a couple of drawbacks for the SPs.
Once the Customer has migrated to IPv6 Only, it is also still possible to access some IPv4 resources (Networks, servers, applications) using NAT64.
I have a presentation for you:
http://www.slideshare.net/fredbovy/transition-to-ipv6-and-security
And you will find more on my page:
http://www.fredbovy.com
I will be glad to help you further.
Fred Bovy
15 years ccie #3013
18 years ccsi #33517 (former #95003)
IPv6 Forum Gold Certified Engineer
IPv6 Forum Gold Certified Trainer
Email: [email protected]
Web: http://www.fredbovy.com
Wicki: http://www.fredbovy.com/MediaWiki
Twitter: http://twitter.com/#!/Fr

Monitoring in an Enterprise SOA envrionment

Hi,
we're implementing enterprise soa like applications in a increasingly higher rate at our company. Using many different SAP products and non-SAP products we're offering end users relatively simple applications based upon a rather complex environment.
However, we're experiencing a lot of difficulty in the monitoring of complete processes. The Altert Framework combined with XI and Solution Manager does provide some monitoring for key interfaces and messages but it does not enable us to link them to the processes involved. The built-in Business Process Monitoring of Solution Manager is very limited and as far as I know is the BPM initiative with Aris no longer exisiting.
Does anyone of you have any opinion or experience on how to deal with this very important topic?
Thank you
Marcel Rabe

Hi Marcel,
Beside being integration tool, the second main advantage of XI is monitoring. If you design your processes or Enterprise Services using XI(BPM), you can easily monitor end to end solutions.
But, if you are bypassing XI and using point to point solutions, definetely you would not be able to monitor the processes.
Regards,
Piyush

Trying to run program off network location using GPO with Power shell script.

Hello All,
Not much of a script writer. I am giving it a shot. My issue is that I need to run a application update across our network and I am trying to do it with as little hands on as possible. So I was planning to push a GPO with a power shell script in it
to run the program with elevated privileges.
Little background:
We are running on a domain and end users do not have admin rights.
The application is stored on a share on our network that is open to all domain users.
The installer user name and password is a temp one and will only be valid for the 30 min window when everyone logs in at the beginning of the day.
So this is what I have so far.
$username = "USER"
$password = "PASSWORD"
$credentials = New-Object System.Management.Automation.PSCredential -ArgumentList @($username,(ConvertTo-SecureString -String $password -AsPlainText -Force))
Start-Process PSQLv11Patch_Client_x86.msp -Credential ($credentials) -WorkingDirectory \\Server\Folder\Folder1\Folder2\filder3\PSQLv11sp3_x32\
But for some reason I keep getting :
Start-Process : This command cannot be run due to the error: The system cannot find the file specified.
At line:10 char:1
+ Start-Process PSQLv11Patch_Client_x86.msp -Credential ($credentials) -WorkingDir ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Start-Process], InvalidOperationException
+ FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
Any help you could give would be great.
Thanks,
jdfmonkey

Hi jdfmonkey,
Has anyone provided an answer to your original question? I am trying to use Start-Process to launch a process using another logged in user's credentials, and am not able to get it working:
$cred=Get-Credential
start-process Process.exe-WorkingDirectoryC:\Scripts-Credential$cred
I get the same error that you mentioned:
start-process : This command cannot be run due to the error: The system cannot find the file specified.
At C:\Scripts\Process.ps1:2 char:1
+ start-process Process.exe -WorkingDirectory C:\Scripts -Credential ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Start-Process], InvalidOperationException
+ FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
When I leave off the credentials:
start-processProcess.exe-WorkingDirectoryC:\Scripts
It works correctly. Does anyone have a solution to make this work correctly?
Please ask your own question. You issue is nothing like the current thread. You clearly are using a user account that has no access to the folder. It is a permissions issue. It is not a scripting issue.
If you need further help please start your own question.
¯\_(ツ)_/¯

Flexibility with Enterprise SOA - script issue

Similar Messages

Maybe you are looking for