FlexUnit windows keeps disappearing

Lately Flash Builder has started minimizing the FlexUnit results window immediately after running unit tests (see screenshot below). The window is visible while the tests are running, but it minimises as soon as the tests finish.
I use test driven development and having to open the window after every test drastically slows down the whole process.
This is a new behavior which started around Wednesday this week.
Is there a setting I can change to keep the window visible after running FlexUnit?

Thanks for the tip Sudhir but unfortunately it does not help. Please see the screenshots below.
Screen #1 shows what FB looks like before I run FlexUnit.
I then run FlexUnit using Alt+Shift+E,F, and screen #2 is displayed while FlexUnit is running.
When FlexUnit completes it goes back to screen #1 with FlexUnit minimised. The previous behavior was to keep showing screen #2 after FlexUnit completed. Then window would only disappear when I started typing.
I know I can click on the "Restore" button for the FlexUnit window, but then the window stays visible permanently and then I need to close it manually before I start typeing. The previous behavior was ideal, but something changed to cause this new behavior which is inconvenient.
Screen #1:
Screen #2:

Similar Messages

My external Seagate 4Tb drive keeps disappearing on my Windows 8.1 Toshbia X75 laptop

I have a new Toshiba X75 laptop running Windows 8.1 64 Bit. One of my external drives keeps disappearing on me and the only way that I know of to get it back is to reboot, and this is getting old real fast.
I have 5 external hard drives; drive 1: 500Gb, USB 2.0 western digital, drive 2: 2TB, USB 3.0 seagate, drive 3: 3TB, USB 3.0 seagate, drive 4: 4TB, USB 3.0 seagate, and drive 5: 4TB, USB 3.0 seagate. Drives 1, 2 & 5 are connected to a powered USB 2.0
7 port hub which is plugged into one of the laptop's 4 USB 3.0 ports; the othe two drives are plugged directly into two of the other three USB 3.0 ports on the laptop.
Drive 1 has done this once before and hasn't done it since. Drive 4 is the problem child although drive 5 has done this in the past too. Both drive 4 & 5 where purchased at the same time. At first I thought that drive 4's problem was the drive it self,
so I had it replaced, but it still is a problem child. When it was replaced they gave me a newer version of the drive too.
Is there a fix via Microsoft?
I have read that there might be some sort of a fix for the registry, but when it comes to playing with the registry, I tend to make sure that I know exactly what I'm doing before hand, and right now I don't know what to do in the regestry.
Anyone have some great ideas?
And thanks ahead of time for the help.

This is probably the article that you were referring to with the registry fix:
"Help! After installing Windows 8.1, my USB drive disappears or file transfers
stop unexpectedly..."
This article was updated to state that the registry workaround is no longer required, as the Update has a fix in it. However, you still might want to check the power settings and make sure 'suspend' is disabled.
Hope this helps,
David
Windows Outreach Team - IT Pro
The Springboard Series on TechNet

Hard Drives Keeps Disappearing Windows 8.1

I just recently upgraded to Win 8.1. I have 3 hdds. Win is installed on Samsung SSD. The other hdds is for software and for games. The gaming hard drive keeps disappearing. I have to restart the computer to get it show again in My Computers. Also I notice
sometimes when I restart my boot order keeps changing. I have to go into the bios and change the load order back to my SSD to the 1st priority. Can someone help with this issue?

Hi wjason777,
OS related issue please consult on MS Answers http://answers.microsoft.com/en-us/windows
Hardware related issue please contact your provider.
For your issue, when you reboot you can press F2 or F12 to load your boot menu. However, please notice the key depends on your hardware. It migth also be F5. So you may have to contact your computer provider about this issue.
If you can open that Boot menu. Please try search for boot order. Then you will be able to change the order.
By the way, if SSD keeps disappear, I think it is poor contact. I will recommend you contact your provider for more details.
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ICal Tasks/To Do Items Keep Disappearing, plus search function doesn't work

Ever since I upgraded my Mobile Me calendars about two or three weeks ago, which as I understand makes my calendars now LIVE on the Mobile Me cloud instead of directly on my computers, I have had nothing but trouble with iCal. I use Bento with iCal for my project management system — I use the iCal Tasks for my basic information, and I added extra fields in Bento for other details I like to track. Anyway, the upgrade completely unhinged where those two came together so that the basic information that Bento was getting from iCal no longer matched with the extra details.
But that's no longer my problem. I fixed that easily by completely changing the way I track things now — I did away with the extra fields and decided to have Bento work directly and only with the information in my iCal app.
Still, another problem came up, the one I need an answer to. New tasks I entered through Bento, wouldn't KEEP on iCal. They'd show up momentarily, but a day or two later, they would be gone.
I thought I fixed it a few days ago when I discovered that Time Zone Support wasn't checked on iCal. I made sure it was checked on all my computers AND on Mobile Me because I suspected that Tasks were disappearing every time my computers synced with Mobile Me. It seemed to work fine after making sure everything supported time zones. I even synced a few times, just to test it, checked all calendars at all places, and whatever Tasks or To Do Items I added from within Bento appeared to sync fine, appear at all the proper places, at all instances of the calendars, AND stay put.
BUT I just discovered tonight, that the new Tasks I entered in the last week for one of my calendars have ONCE AGAIN disappeared. For some reason, though, the new tasks I entered for another one of my calendars managed to stay put. I have no idea why one calendar was affected and another wasn't.
The point is, I can't for the life of me figure out why my newly entered Tasks keep disappearing. Is it an iCal thing? Is it Mobile Me? Is it because I am entering the tasks/to do items from within Bento? What?
And the icing on the cake? The search function on the iCal app on one of my computers no longer works. I will search for a task/to do item that I KNOW is there and can actually see on the side bar, but it will not pop up in the search results. I searched online about how to fix that, but none of the fixes work — many of them, I believe, are outdated and so can't work in my case.
Does anyone have any ideas how I can fix these issues?

with iTunes and the apple.com web site, you don't hit
the Magnifing glass, after typing out what your
searching for, you hit enter on the keyboard. The mag
glass (Atleast in windows) is just for decor showing
you its a search field, its not an actual button like
it would be in most Microsoft/Windows apps
Thanks. I thought the magnifying glass was a clickable icon.

I can't get imovie to open after trying to shift the image to my TV by clicking fn F3. If I hold the mouse on the imovie icon for a few seconds the imovie window opens but if I click anywhere on the window it disappears

I can't get imovie to open after trying to shift the image from my macbook pro to the tv screen like I have done many times before. If I double click on the imovie icon, imovie doesn't open, but the strip across the top shows iMovie, file, edit , clip, view, text share window help tabs across the top. The iMovie window will appear if I click on the iMovie icon on the dock for a few seconds, or if I do control F3 at the same time, but when I click on the window it disappears. When I hover the mouse over the iMovie window that appears the window has a blue border around it. when I move the mouse outside the iMovie window the blue border goes away. If I sweep 4 fingers from the top of the screen down, the screen dims a little but the iMovie window doesn't appear. If I click play under the view tab I can hear audio, but still no iMovie window. It's as if the window is being blocked by the desk top somehow.

Similar issues here.
I purchased five movies for download and having nothing but problems getting them downloaded. I keep receiving error messages and the download stops and I have to restart it, just to get another minute worth of download with each restart. Now Apple has my money and I have nothing.

Why would my Acrobat tab keep disappearing from my Office programs?

Every so often, my Acrobat tab keeps disappearing from my Office programs. It seems totally random, but happens when I am actually using the tool to convert a word doc or excel spreadsheet to PDF. I am using Office 2007 Professional and Adobe Acrobat XI Pro.
I have no problems getting the Acrobat tab back by doing the following:
1. Close the affected Office program (ie Word, Excel etc)
2. Reopen the affected Office program as Administrator.
3. Go into Options >Add-Ins> COM addins and delete the existing Acrobat PDFMaker COM Addin.
4. Click OKs and close the program.
5. Reopen as Administrator and go back to Options >Add-Ins> COM addins and Add Acrobat PDFMaker COM Addin.
(The add in for me is stored at C:\Program Files\Adobe\Acrobat 11.0\PDFMaker\Office and select the PDFMOfficeAddin.dll file. )
Once I add it back this way, it stays for sometimes up to 2 months, but then disappears again. I've had this happen in Word and Excel.
So getting it back is not an issue, but knowing what it happens in the first place and stopping that occurrence would be even better.
Any help with be awesome.
Thank you

Yeah.. I just noticed I was missing stuff last week, and then realized that my Apple TV was not showing up in my iTunes device list. I'm just hoping that the silence on this issue from Apple is a sign that they are getting ready to push out an update to correct either itunes or Apple TV. I've read lots of complaints, and just a few remedies. I've tried the remedies (including the one on the Apple TV support site) and none of them work for me. I have noticed one thing that that I wanted to try. In iTunes->Preferences->Apple TV I have an Apple TV in the "Apple TV's connected to iTunes" window, that shows a status of syncing. Since I don't have an Apple TV in the device list, and my Apple TV was reset days ago so it is giving me the code to enter into iTunes, can I assume that this item can and should be deleted. I don't think this is going to solve my problem, but it looks like a good next step. Any suggestions?

Vertical Scroll in iTunes 11 Keeps Disappearing

I'm having a problem with the vertical scroll feature on the righthand side of iTunes 11. It keeps disappearing on me. If I adjust the size of the Itunes window, it'll show up, but only momentarily. Eventually it disappears. I have to re-adjust iTunes's window when I want to use it again. Also, in the new Expanded View, if an album has more tracks than can be seen in the window at one time, I need the vertical scroll, only it's not there! Until I re-size the window. But as soon as I click on a track, the vertical scroll disappears. I wouldn't mind it fading away when I'm not using it, but I'd like for it reappear when I need it.
Is there any way to lock the scroll bar on the right hand side?

After playing around with iTunes a little, I've figured out a solution. I didn't mention it in my previous post, but I am using iTunes 11 on a MacBook Pro.
The quickest way to temporarily bring back the vertical scroll bar on MacBook Pro:
Use the two finger scroll technique on your multi-touch track pad. Do a two-finger tap and the scroll bar will briefly reappear.
It's funny, your brain gets so used to using iTunes one way that you don't think to use the techniques you use with different programs. My solution almost seems self-evident.
The scroll bar is everpresent in the PC version iTunes 11 on a PC. I just wish this was the case for Macs. It seems like it scrolls more slowly too.

I have installed Flash Player 5 times. It keeps disappearing, or won't load when I'm running MSIE8.0

I am running Windows XP, MSIE 8.0. I have installed Flash Player 5 times. It keeps disappearing, or won't even install over Internet Explorer. It stops halfway, and tells me to close Internet Explorer because it can't install with it running. I did that yesterday, and it installed when I started IE again, so I thought the problem was solved. Then, today, I logged on and tried to use Flash Player. It was not installed. I re-installed it, and came to the same block. It will not install while Internet Explorer is running.

Download the correct 32-bit or 64-bit uninstaller and installer and exit I.E.8.
http://forums.adobe.com/message/3952360#3952360
Run the uninstaller.
Reboot.
Run the installer.

Space on boot volume keeps disappearing - crisis

One of my customers has a Mac Pro running OSX Server 10.4.9. It was installed last October and was running fine until a few days ago. It's running afp, firewall, nat, dhcp, dns, mail, print, web (for webmail) and windows services.
The only non-Apple things running on the machine are Now Contact/Up To Date server, Timbuktu and Retrospect. I have the same combination running on the same model hardware elsewhere without problems.
The boot volume had about 85gb free and mail has its own dedicated volume. The boot volume is not shared or used by anyone.
Then I had a call from the customer saying mail wouldn't send out. When I looked at the machine, the problem was that there was exactly 0 bytes available on the boot volume and postfix couldn't find queuing space.
I deleted all the rubbish - dmg files from various installs, other files 'parked' on the dekstop etc. and got back about 8Gb. I made a note to look at the machine on my next visit and thought that was it.
The 8Gb disappeared within a couple of hours. This time I looked a bit harder (partly because there wasn't any rubbish left to delete). Naturally, there were no files visible to finder that would account for the space used. My frantic but fairly superficial spin through ls -l in a terminal didn't show me any 'new' folders I didn't recognise. Looking at Activity Monitor, I saw that there was almost constant disk write activity going on, even though the users were apparently 'hands off' their machines. The only process using any cpu time was the Now Contact event server - so I pounced on it, thinking it was bound to be the culprit, being a buggy piece of software at the best of times. When I killed the process, the disk writing stopped.
I got on the phone to Now Software and they told me every place they THOUGHT the program wrote to - nothing. I restarted the machine and made sure the Now Software stuff wasn't running. Everything seemed stable, except I still hadn't figured out where the lost space was. However, it started again the next night.
Over the past few days I've been fightng a running battle to keep space above zero. I've now deleted everything in applications, utilities, library etc that I can live without and I've even gone as far as clearing every log file, but the space keeps disappearing. I'm now down to 150Mb and there's nothing left to delete so I have to find out where it's all really going to.
I have done a file search on all the usual combinations - visible/inivisible, created/modified/bigger than/smaller than etc but nothing stands out.
Is the server being attacked? I've shut down windows and web, and SSH was always switched off. I've been watching system.log without seeing anything obvious happening. The server has been restarted many times so it's not a virtual memory thing (I think).
I'm depsarate. Where should I be looking?
Justin

Good grief. First of all, thank you very mich for introducing me to du.
Here's what I I learned (and it's obviously an accident since no-one on site would know how to do this deliberately):
There is a volume (a real hard drive) called Archive. It's got about 90-something Gb of stuff on it. There are also three other volumes but here's the thing about Archive. I failed to notice in my earlier quick scan that /volumes contains an item called 'Archive' AND an item called 'Archive 1' - each being about the same size. When, in the finder, I deleted a folder from Archive that they could live without, it was Archive 1 that got smaller as seen by du.
going cd /volumes/archive shows me just one folder (which doesn't exist on the real volume but did once).
going cd '/volumes/archive 1' shows me what appears to be all the folders that are supposed to be there (on Archive). I haven't trawled right through and done an entry-by-entry check.
On impulse, I've just loaded Workgroup Manager and looked at Sharing. Under 'All', the left hand pane shows the volumes I'd expect to see (and nothing else). Buuuuuuttttt....... under 'Share Points', the volume we know as Archive is called 'Archive 1' - with a custom afp name of 'Archive'.
What have they done? I don't know what to delete at this point; and the trouble is that I suspended backups last week (because the catalogue files were amongst the things I removed to get some space back). I'll have to do a manual backup of Archive, verify it, and then try deleting something and see what happens.
What I'd really like to know is what happened and how. For example, would anyone like to try and build a hypothesis whereby the server was brought up with Archive off-line, then, after some other event, Archive subsequently came on line? Is this how you might end up with two apparent volumes with the same name?
Justin

Baggage Files keep disappearing

I am aware of the RH6 issue of the baggage files not being
able to be added the traditional way, and the user having to add
them manually in rhbag.apj file. I have done that and they do work
after that is done, but my problem is that they keep disappearing
after some time, and I will have to go in manually to add them
again. I add them, they work, and then after a couple days and a
couple compilations they are removed again and my link doesn't work
of course. Does anyone know a work-around to this, and how to make
them permanently stick? Or, am I to accept this nuisance and find a
different method for displaying these files? Any advice is greatly
appreciated!
Danni

I link to .pdf files from the TOC with no problem.
Danni, you mention,
"...and the user having to add them manually in rhbag.apj
file."
I always import baggage files in the RH explorer view, and I
let RH take care of the rhbag.apj file. (This is not to reject my
colleagues' advice to edit the file. It may be necessary. I haven't
needed to do that.)
RH also keeps the baggage file list in a database table in
the .cpd file. It has a separate table for links to baggage files.
On the rare occasion when I have a problem, I discover an
error in the database table. For example, each topic and baggage
file has an ID number, and sometimes a file ID acquires a "minus"
sign. Normally that's a "missing file" flag, but RH can't reconcile
the database flag with the file's presence in the project folder.
Open a backup copy of the .cpd file in MS Access, go to
tables view and open the ones for baggage files. If you see a
negative topic or file ID, and you know the file is in the
project's Windows directory, delete the minus sign.
If you see entries for baggage files that you know are
obsolete, and you've removed them in RH and the project directory,
delete those entries. Save before you exit from Access.
Access may warn that you won't be able to save any changes
unless you convert the database file to your current version of
Access. I've ignored this warning and successfully saved changes.
On the other hand, I don't believe any harm would come from
updating.
Temporarily change the name of the original cpd file and
substitute the revised copy with the correct file name.
Launch RH and open the project. The baggage files should be
straightened out, but if not, try importing the "missing" ones from
a location outside the project directory. (The corollary is that
you shouldn't try to import a baggage file that's already in the
project directory and may be in the rhbag.apj list as well. That's
what sometimes confuses RH.)
Interestingly, when you import a file that RH previously
couldn't find, sometimes the import dialog says the baggage file is
already in the project, do you want to overwrite it? Just say yes.
Don't try to explain it, because RH can't tell you why it has to
overwrite a file that isn't there.
Of course, you have the option of going back to the original
.cpd file by removing the new one and renaming the old one.
Sometimes I start by making a copy of the entire project, but then
I have to label and remember which folder contains the version I
want to use later. Don't use the "recent projects" list in RH
unless you revised the project name for the copy.
Harvey

Mail boxes keep disappearing.

All my mail box lists keep disappearing in the window to the left in Mail. Nothing to do with the "hide" button. If I quit mail and restart the mail boxes reappear, but after a few times leaving the application running in the background while doing something else, the boxes disappear again. Only started happening in the last few days. Any ideas?

Linc Davis soultion seems to have solved the problem:
https://discussions.apple.com/message/22460197#22460197

My icons keep disappearing and then reappearing

I'm new to macs and this problem is confusing me, all of a sudden last night my desktop icons keep disappearing and then they reappear in the same place, but if i have a window open like Macintosh HD it closes it. When this happens it also switches from what im working on, like this message so I have to click back on it to continue.
This is happening alot and I was hoping someone could give me some info. or do I have to reinstall.....
Im used to having to do these things on PC's but not on macs.
Cheers

Tony,
You have to reset the parameter ram.
http://docs.info.apple.com/article.html?artnum=2238
Macintosh: How to Reset PRAM and NVRAM
This document explains how to reset the parameter random access memory (PRAM) and nonvolatile RAM (NVRAM) on Macintosh computers.
Resetting PRAM and NVRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Your computer's PRAM and the NVRAM are reset to the default values. The clock settings may be reset to a default date on some models

I check the box to "Remember the password for sites" and the check keeps disappearing.

I check the box to "Remember the password for sites" and the check keeps disappearing. Each time I open the Security page in Options the check box is clear. I'd like it to stay checked.

See:
* http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

My calendar events keep disappearing when I add them to my iphone 5 calendar.

My calendar events keep disappearing from my iphone5 a few days after I put them in. I tried all the fixes listed in other questions, but it's not a matter of syncing or not, the appointments disappear and they're not anywhere else either. I need the appointments to stay on my phone, I don't add appointments any other way or on any other device, and when they're gone, I have no idea what I'm missing. It's screwing up my work schedule because I don't know what has disappeared.

App (pinned) tabs and Tab Groups (Panorama) are stored as part of the session data [1] in the file sessionstore.js [2] in the Firefox profile folder [3].
Make sure that you do not use "Clear Recent History" to clear the "Browsing History" when Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
* https://support.mozilla.com/kb/Clear+Recent+History
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox
It is also possible to use:
* [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

Contents of applications folder keep disappearing.

The contents of the applications folder in Finder keep disappearing. I don't recall having the problem before and I can't pinpoint what might have prompted the issue. Restarting the computer does not always help, but shutting down and booting back up does. But it doesn't last. Applications appear as normal, then disappear again on moving away from Finder and going back in. Anyone experiencing the same thing / or know how to solve? (MacBook Pro, Retina 13", OS X Yosemite)

I've seen this before (on this board and on my machine once) and the solution was to blow away the .DS_Store file for /Applications. So Launch /Applications/Utilities/Terminal.app and type:
+rm /Applications/.DS_Store+
+killall Finder+
When the finder comes back up, see if the Applications folder loads for you now.
As for the Applications folder in your Sidebar, most likely you removed it by accident. Its pretty easy to do, but also pretty easy to fix. Double click on your hard drive on the Desktop. In the window that appears, drag the Applications folder to the Places section of the sidebar. That should do it. Hope that helps...

FlexUnit windows keeps disappearing

Similar Messages

Maybe you are looking for