Flickering problem after re-installation of Premiere

I re-installed Premiere and opened a project file that I edited before the re-installation.
Playing of the movie looked no problem in the Premiere. But when I exported it, the movie
flickered a lot, keeping images going back and forth. I tried in various formats and frame rates,
but every time they came to same results.
Please let me know how to fix the if there are someone who experienced same problem.
Thanks
Wonpyo

Hi
I dont understand what the problem is. The Toshiba units are delivered with a Recovery CD. The Windows OS on this recover CD is already activated and its not necessary to activate anything.
If you use the original Windows from Microsoft CD so you have to activate this OS. But this is not a Toshiba problem. You have to contact the Microsoft.
Note: You can not activate Windows OS from the original Microsoft CD with the Toshiba image number or something like that!
Bye

Similar Messages

Serious problems after Mavericks installation with External Drive Lacie P9220.

Experiencing serious problems after Mavericks installation with External Drive Lacie P9220 1TB. Mac Finder totally locked!
I had to format the External hard drive with a Windows PC (fat32), then format again with my IMac (mac Journal.) and hopefully restored data from time machine backup.
So far so good but system looks unstable. Some software were not able to write on the hard drive.Some strange things happens. With Mountain Lion never had an even minor issue.
I read many discussion regarding problems with WD, just wondering if anyone had the same problems with Lacie and if there is any tip to solve the
problem.
Many thanks.
Marco

Thanks very much for your reply.
Unfortunately I couldn't find a solution because the article refers to whom have configured the drive with included software and drivers that came with the drive.
This is not my case, I never used any third party soft ...only OS X disk utility ...
best
marco

Problem after SP19 Installation

Hy guys,
ich have the following problem after the SP19 INSTALLATION:
I cannot see the adapter in Adapter Monitor and no communication channel works.
I already read thread about the problem and already imported SAP_BASIS Software components but doesn't work.
Could someone give a tip.
Thank's a lot and a nice day.
Mati

type the folllwoing url
http://<yourservrname>:<yourserverport>/mdt/channelmonitorservlet. this is checks whether the adapter is running or not.
Regards
Sreeram.G.Reddy

Sound problems after export media in premiere pro cs6

hello,
i recently started usining premiere c6 and after exported my project to mpeg-dvd i noticed that sound quality is reasonably lost, than exported sound separatedly without video to wav and result was the same bad. The imported sound source was really good, recorded in studio- wav 24 bit 48000. Before i used cs3 and never had such a sound problem after export video.
thank you very much,
Poly

It's difficult to speculate without hearing the original and the export. Can you upload them?
https://www.depositfiles.com/en/

Pavilion dv7 4050ed - Windows Update Problems After First Installation

I have only just today received my brand new HP Pavilion dv7 4050ed and commenced installation straight away. There were no problems in the initial installation and I booted Windows for the first time successfully and let it do its auto installs for things like Java and Adobe Reader. I then moved to update and patch the laptop with Windows Update but immediately noticed that something was wrong. Upon opening Windows Update I was met with a white cross in a red shield to signify an error. When I prompted it to "Check for Updates" I was met with an error message stating, "Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer." I get the same error message when I try to run Windows Live Messenger.
After multiple restarts and checking in the control panel that the update service was allowed and working, the error message still appears whenever I try to update or patch my machine. How can this kind of thing happen to a brand new machine that I've had for less than a day and has only had its basic settings chosen? It simply will not update, or even recognize that the update service is available. The internet is fully functional so it isn't any kind of connection problem.
Has anyone got any ideas as to what the problem could be?
I probably should just add that the laptop is a Dutch purchase with a bilingual setup. I chose the English setup option but was advised to include this information in case it could in any way affect the update system.

HP support provided me with the following link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02219204&cc=nl&lc=en&dlc=en&product=4213233
On this page there's a download called sp47845. After installing this, everything was working again.

[SOLVED] Several problems after fresh installation

Hi guys,
i just did a fresh installation of arch and every times i must do something i get this error:
cannot remove, read, edit and etc : read-only file system
So i searched for a workaround.. but i must do this after every boot
This is it:
mount -oremount,rw /
There's a way to fix this forever?
Often when i need to edit some files, like /etc/pacman.conf or xorg config file, arch tell me: You do not have write permission to modify... that file
Searched another workaround.. and also this i must do every time after each boot:
sudo chown -R black /directory of file that i'm trying to edit/
I hope to fix this annoying problems, with your help.
Thanks guys,
Gabriele.
Last edited by Lilith (2012-09-28 13:18:46)

Ok guys,
think solved by change my /sda6/ (root) by /mnt to / and adding a slash / before home, boot, var.
Rebooted and try to edit the same file /etc/fstab and no warnings
Now is like this:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmps nodev,nosuid 0 0
#UUID=blablablabla
/dev/sda6 / ext4 rw,relatime 0 1
#UUID=blablabla
/dev/sda9 /home ext4 rw,relatime 0 2
#UUID=blablabla
/dev/sda5 /boot ext2 rw,relatime 0 2
#UUID=blablabla
/dev/sda7 /var reiserfs rw,relatime 0 2
#UUID=blablabla
/dev/sda8 none swap defaults 0 0
Thanks to everyone i also fixed my 2nd problem that i think is related to the first
Last edited by Lilith (2012-09-28 13:15:43)

Brower problem after GPO installation

After installing Adobe reader 9.3.0 via group policy users are getting a very annoying error in Internet Explorer telling them that their version of Adobe Reader is not the right one to open the pdf file and they should download version 8 or 9.
I also tracked down the problem to the missing registry key "HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe". The default value of this key should be pointing to the installation directory.
To be extra sure i checked the transform with the customization wizard and as value it has "[AS_HKCR_EXE]" so i'm at a loss why it doesn't appear on clients.
Besides the problem of the browser, everything in the transform works, EULA preaccepted and other stuff i set up.
I used GPO so that i don't have to walk by all 80 computers, but due to this problem i still have to visit every computer to repair this registry key.

type the folllwoing url
http://<yourservrname>:<yourserverport>/mdt/channelmonitorservlet. this is checks whether the adapter is running or not.
Regards
Sreeram.G.Reddy

Battery Problems After Mavericks installation

So i have a MacBook Pro 8.1. Before i installed mavericks (under mountain lion) i was getting about 4.5 hrs on a full charge (90% brightness). After installing Mavericks i've had several problems.
Immediately, I received a "service battery" error. I never had that problem before.
Battery life seems to be jumping all over the place. One minute it will say that i have 30% left (and literally within a span of a min of two) it will drop to 17%. (with no noticeable app draining the battery - as confirmed by activity monitor).
The time remaining indicator takes about 5 min to indicate how much time left this is in contrast to booting in safe mode (where the indicator showed right away).
Battery life seems about the same (i.e. on a full charge i see it at about 4 hrs - but then it quickly drops 3.5 and than back up and then back down)
I did the following to see if i could "fix" the problem.
a complete battery cycle (calibration). - this seemed to get rid of the "service battery" indicator at least
a PRAM reset (x2)
an SMC reset (x2)
Disk / Permission verify and repair (no problems)
I booted off a 2nd internal HD which had a copy of Mountain Lion. The above problems were nonexistent which leads me to believe that this problem is specific to Mavericks.
p.s. and No Spotlight (or any particular process) isn't consuming a large amount of energy.
All that being said, anyone have any suggestions? At this point i can't trust how much time i really have on my battery.
For what it's worth i have installed a 3rd party SSD. I noticed on a few different discussions that being a common thread with others having the same problem.

I have exactly the same problem with an MacBook Pro 8.2 for first time some days after a clean Mavericks installation.
I dont have a 2nd internal HD installed.
We need an answer from Apple.

Direct X Problem after Parallels Installation!

This is extremely urgent and any help would be apppreciated!
I was running Bootcamp with Windows Vista smoothly until I decided to install Parallels 4.0 on my Mac 10.5.8. After installing Parallels, it loaded my Bootcamp installation which sort of freaked me out and so I closed Parallels without doing too much. When I booted Vista today, I tried running games that requried Direct X or enhanced graphics and they are not working! These games used to work fine before I had installed Parallels! I even tried fixing the Bootcamp installation by repairing the drivers through the installation cd that came with Leopard, but I still get the same problem!
An example: I try running Project64, and it gives me a Direct X error 8876086A, stating that plugins are missing.
Some games crash back to desktop without any error.
*Please help!*

Hi and welcome to Discussions,
I admit I never allowed Parallels to use my BootCamp Windows, but this sounds to me like Parallels has somehow altered the state/version of DirectX in your BootCamp Windows, since Parallels only has support for DX 8.1 .
Have you run a 'DXDiag' to check the DX system on your Vista ?
Regards
Stefan

Startup problem after driver installation!

windows 2000 server will not start properly with the tvanywhere master card drivers installed. It used to work properly with a k7n2g-ilsr with the integrated graphics controller. It also worked with the Radeon card with that motherboard. Although that installation seemed to degrade-- initially, I could watch TV on a 2nd monitor and play a game on the primary monitor, but for an unknown reason, after some time, the system would blue screen and reboot.
I then switched to the current MSI motherboard k7n2 Delta and it no longer works. When I start windows now, it takes a very long time to start and then I cannot log on. I reinstalled windows 2000 server and experienced the same problem. I tried the tv card in slot 2 initially, and the machine would loop from the "press ctrl-alt-del" screen to the login screen. After entering the password, it would go back to the ctrl-alt-del screen. are there any known incompatibilities with the ATI radeon chips? I have also tried earlier versions of the graphics drivers with no success. After putting the card in slot 2, I got past the login screen but it then hang without being able to load the taskbar.
in order to boot, I have to start in safe mode and disable the drivers to start up. I have been able to boot by disabling the audio capture device on the card , but i cannot use the msipvs software to take advantage of the card.
I have installed the card in another system (the one that is currently using th eoriginal msi motherboard (k7n2g-ilsr) but I need it to work with this system.
Please help! Thank you!
Athlon XP 2200+ (1.8ghz)
msi k7n2 Delta
512 mb DDR ram
adaptec 2940 UW contoller
pci modem
MS windows 2000 server sp4

I changed power supplies after the one I had died, and I put in a new power supply. It worked for about 1 week and then it caused windows2000 to crash while starting up and reboot over and over. :( I tried a new 450w power supply and it does the same thing. :(

Activation problem after re-installation of XP Home

I do have a laptop - Satellite - that came pre-installed with XP Home. I did have a major crash, and decided to reformat and reinstall XP Home.
There is no CDROM that came with the computer, so I used another XP Home installation CD. Installation went fine, but I can't activate Windows XP with the product code which is on the sticker on the bottom of my laptop. Microsoft refers me to the OEM manufacturer.
So the basic question is: how can I activate XP, or should I reinstall XP from an original CD (or via download?) to make sure I have a version that can be activated.

Hi
I dont understand what the problem is. The Toshiba units are delivered with a Recovery CD. The Windows OS on this recover CD is already activated and its not necessary to activate anything.
If you use the original Windows from Microsoft CD so you have to activate this OS. But this is not a Toshiba problem. You have to contact the Microsoft.
Note: You can not activate Windows OS from the original Microsoft CD with the Toshiba image number or something like that!
Bye

IMac 2007 with audio problems after mavericks installation

Hi all,
I'm having some troubles since I updated my iMac (mid 2007) to Mavericks.
After the successfull installation of Mavericks I don't get any audio from my iMac. Regardless if I try to hear some music or system sounds.
Everytime you would expect a system sound (for example incoming mail) the speakers will start to buzz instead of the expected system sound.
This also happens during the system boot. I tried to reset the PRAM but without success. I also tried to check MIDI settings but this also didn't help.
Before Mavericks everything worked fine...
Does anyone have an idea or do I have to go to an Apple Store?
Many thanks and kind regards.

Have you tried a PRAM reset - might help: http://support.apple.com/kb/ht1379

Problem after Oracle installation.

Hi,
After I install Oracle 10.2.1.0 and patch it to Releas 10.2.4.0.
My installation was successful
Tried to stop and start DB by using (sqlplus “/ as sysdbs”) comman on command promp.
But I get this error.
E:\oracle\SOT\102\BIN>sqlplus / as sysdba
SQLPlus: Release 10.2.0.4.0 - Production on Mon Mar 22 16:43:03 2010*
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
I tried to check at my listener is start in Services, but I can not find my listener on services list. I har just ‘OracleSOT102iSQL*Plus’ on services list.
Any body knows why?
Thanks

>
[xxxxx@xxxxx zambia]$ oerr ora 12560
12560, 00000, "TNS:protocol adapter error"
// *Cause: A generic protocol adapter error occurred.
// *Action: Check addresses used for proper protocol specification. Before
// reporting this error, look at the error stack and check for lower level
// transport errors. For further details, turn on tracing and reexecute the
// operation. Turn off tracing when the operation is complete.
You have new mail in /var/spool/mail/zambia
>
Please show us your PATH environment variable... My PATH environment variable is as follows.
C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Program Files\Common Files\NetSarang;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\system32\WBEM;C:\OracleBI\server\Bin;C:\Oracle\product\10.1.0\Client_1\bin;C:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin\client;C:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin;C:\OracleBI\server\Bin;C:\OracleBI\web\bin;C:\OracleBI\web\catalogmanager;C:\OracleBI\SQLAnywhere;C:\Program Files\Java\jdk1.5.0_15\bin;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared\Regards,
Phiri

Socket threads problem after SOA installation

Hi all,
I am getting below error after sending request to the server(after weblogic and SOA servers started properly.
<Warning><Socket>'There are: '5' active sockets, but the maximum number of
socket readers allowed by the configuration is: '4', you may want to alter
your configuration.>'
I am not able to deploy the application into the SOA Server(I am getting http response 502 error in my Jdeveloper's log).
I have seen forums about this ,they told to change the socket threads in weblogic console(mine is weblogic 10.3.5 server) ,but I am not able to change in the console.It has already some value as 33 and when I change and save ,it is telling value can not be changed dynamically.
I was told to change like below.But Where do I need to change like below and how
java -Dweblogic.ThreadPoolSize=10 -Dweblogic.ThreadPoolPercentSocketReaders=60 ... your.client ...
I am stuck(I am not able to deploy the applications into SOA server)
Thanks in advance

Hi
1. What you are seeing is <Warning> and mostly you can ignore this. This may not be the root cause for your error.
2. Can you access your soa server url from browser like http://soahost:soaport/bpm/workspace url should work. Try soahost with direct ip address or dns name of that machine.
3. In Jdeveloper, when you configure this, I hope you Tested the connection and does it show success.
4. One way to quickly test is, deploy the SOA Workflow JAR directly from EM Console. The .jar file should be under your soaproject/deploy folder. If you have EAR for TaskForms, deploy EAR also from Console or EM Console. If all this works, this means, JDeveloper is not able to connect to soa server. Search for Proxy settings forJDeveloper in this forum. I remember seeing some posts to enable/disable Proxy for Jdeveloper like that.
5. Look in the log files for any errors while deployment. But if server itself is NOT accessible, you may not see any deployment errors at all.
Thanks
Ravi Jegga

Problems after new installation (Runtime workbench not working as expected)

Hello
We have just finished installing new ECC & Netweaver in our company.
On PI side, I created a sample file (Payload) and did IR and ID configuration
and saw the payload getting picked up from the source directory and getting
posted in the target directory successfully.
However, when I went to Runtime Workbench and clicked on the Adapter and
File adapter to see the messages, I dont see anything. It is just blank.
However, when I click on Display it shows integration server and 4 items under it. 4th item is Adapter Engine which has a RED button next to it, indicating there is some problem.
When I click on the Adapter button to see the list of adapters, i see again a red button next JPR. However, File doesn't show any error message. But when I double click on File adapter, instead of showing successful messages, it shows a blank screen as if no file has been transmitted.
Also down at the bottom of the Runtime Work Bench Screen
Self-Tast Status and
Are Communication Channels without errors
also show a Red buttons next to it.
By double clicking on 'Are communication Channels without errors - Details", I get the following error message:
1 communication channels have an error status0 communication channels inactive0 communication channels not providing any status information0 adapters logging communication-channel-independent processing errors .
This is a fresh new install and any feedback on this will be greatly appreciated.
Thanks

Not answered completely. But still closing to make room for new questions

Flickering problem after re-installation of Premiere

Similar Messages

Maybe you are looking for