Float is not working? I need the text to the right of the image but my CSS isn't working. Help pls

Hi,
I am having some unusual difficulty getting my images to float left/right in order to have the text beside the image. In the image I provided, the red arrow is where I'd like the text to be but no matter what I put in the CSS file, the text begins to the lower right of the image floated left. Can anyone help me figure out what is going on? The code for the HTML is located here http://codeviewer.org/view/code:1f51 The code for the CSS is here: http://codeviewer.org/view/code:1f52
I am using the CSS code from a website I designed that works fine in that website. Why isn't it working here? The image name is "fundraiser.jpg"
Thanks for your help!

Problem is due to you not declaring the correct instructions for the class .float-left css selector:
Change this:
.float-left {
margin: 5px 10px 0 0;
To this:
.float-left {
float: left;
margin: 5px 10px 0 0;

Similar Messages

HT1918 I want to remove my credit card from the payment type to change it to none but it won't let me help pls?

For some stupid reason when I put I credit card details to purchase songs from iTunes I got my songs but now it won't let me remove my credit card details it keeps asking me to change to different card and won't give me the 'none' option anymore and no

Hey Daneele,
This link will go over why you might not be able to select None:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
Welcome to Apple Support Communities!
Regards,
Delgadoh

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem?

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem? I starting to regret that I switched to iPhone...

Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

E book" it tells me that the bI have prepared a photobook, made a pdf and when I press "buy the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

I have prepared a photo book, made a pdf and when I press "buy thhe book" it tells me that the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

You are missing one or more photos - youprobably have a page background that requires a photo which is behind a page with photos on it - all pages must either have a photo or be a color - if you have a gray background it requires a photo - look through the book carefully and be sure to look at the background on any full page photos - you will find one or more missing photos
LN

Hello! I bought an iphone on ebay. I feel the introduction says that is not a service. need to unlock official data on where the contract but I am not asking for help

Hello! I bought an iphone on ebay. I feel the introduction says that is not a service. need to unlock official data on where the contract but I am not asking for help

I'm sorry but your post doesn't make much sense in English. You may want to try posting again in your native language.
Best of luck.

Print problem. trying to print a document in Preview, the start of the text prints half way down the page not at the top of the page?

Print problems. Printing out an email the text starts half way down the page. I tried taking a picture of the text I wanted to print, tried to print from Preview and have the same problem. If anyone has any ideas I would really apreciate it. Thanks Penny

One more thing to check: System Preferences/Print & Scan. Make sure your printer is set as Default.
I'm using OS X 10.8 and I don't see Page Setup anymore. If you have access to Page Setup, check to see if there are any adjustments to make there.

HT204370 I just bought GOT season 1, and it says i need the quicktime player, which I then installed, but it still isn't working, what should I do?

I've already tried uninstalling and then installing the quick time again, but it still isn't working. I have an ASUS laptop it that helps.

I think this is a known problem with Lion and some installs of Logic, I've seen it mentioned before.
Contact Apple.
Here is a related thread.
https://discussions.apple.com/thread/3218471?start=0&tstart=0

Is there a way to prevent the text tone from playing over the speaker while in a call?

I have a custom tone for incoming text messages. When I am in a call, whether it be the handset, speaker or bluetooth, and I receive a text, the text tone plays loudly over the call, and is extremely annoying for me and the other party. It would be nice if it could just give a short quiet vibe while in a call. Please don't tell me change my text notification to vibrate. That is not a solution, I want my text tone to work, except when I'm in a call. If possible I would still like some notification, just something less intrusive. The next best thing would be to just silence it altogether when a call is in progress. Also switching the side button while in a call is not a solution as that defeats the purpose of hands-free, and also is difficult with some protective cases, Thanks in advance.

Hi,
not sure where to find original post. In RDB, it is MSP_EpmTask_UserView.TaskClientUniqueId.
Sorry, if there are now 2 answers.
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

How can i AppendText to richTextBox only if the text is new(different) from the text that is already in the richTextBox ?

Code
public void ScrollNews()
listsext.Ext(page);
combindedString = string.Join(Environment.NewLine, ListsExtractions.myList);
richTextBox1.SelectAll();
richTextBox1.SelectionAlignment = HorizontalAlignment.Right;
richTextBox1.AppendText(combindedString);
scrollerText = string.Join(Environment.NewLine, ListsExtractions.myListWithoutLinks);
scroller1.TextToScroll = scrollerText;
if (NewsLevels.newsLevel && NewsLevels.shouldStart)
UpdateTextControls();
scroller1.Start();
NewsLevels.shouldStart = false;
if (NewsLevels.newsLevel == false && NewsLevels.shouldStart)
UpdateTextControls();
scroller1.Start();
NewsLevels.shouldStart = false;
string[] rlines = richTextBox1.Lines;
richTextBox1.SelectionStart = 0;
richTextBox1.SelectionLength = rlines[0].Length;
richTextBox1.SelectionColor = Color.Red;
richTextBox1.Select(rlines[0].Length, rlines[1].Length + 1);
richTextBox1.SelectionColor = Color.Green;
RedColorAlert1();
if (lines == null)
label5.Text = "0";
else
label5.Text = lines.Length.ToString();
The line is:
richTextBox1.AppendText(combindedString);
I'm calling this method ScrollNews every X minutes with a timer.
The way it is now it will AppendText all the time. But i want it to Add the combinededString only if the text in combindedString was different from the text that is already in the richTextBox. Somhow to keep all the time the last text and compare it and
if there is a new text then appen it.

public void Scroll()
listsext.Ext(page);
combindedString = string.Join(Environment.NewLine, ListsExtractions.myList);
richTextBox1.SelectAll();
StringBuilder sb = new StringBuilder();
sb.Append(combindedString);
richTextBox1.SelectionAlignment = HorizontalAlignment.Right;
richTextBox1.AppendText(combindedString);
The problem is that now it will keep adding to the richTextBox the content in combindedString over and over again. I need somehow to check each time if the content in combindedString already exist in the richTextBox if not meaning it's new content then AppendText
it.
If it's the same already exist do nothing don't add it.
EDIT
I write to a text file the content of the ombindedString variable .The first content the lines is the combindedString:
המשטרה עצרה אמא ל2 ילדים קטנים שבעלה נעצר בחשד למעורבות בעלה בכריתת עצים
15:03 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189935.shtml
אדם החשוד בעבירת מין בקטינים נעצר לאחר שהתלונן על 2 שסוחטים אותו על רקע מעשיו
14:50 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189932.shtml
אינדונזיה: 5 הרוגים בקריסת האנגר בנמל תעופה
14:44 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189930.shtml
אום אל-פחם: מספר חשודים עוכבו בחשד למעורבות במימון טרור
14:04 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189914.shtml
אלמנתו של רפ''ק ג'דעאן אסעד, שנרצח בפיגוע הדריסה, ילדה בן
13:05 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189884.shtml
תנאי ליברמן לכניסה לממשלה עונש מוות למחבלים חובת חתימה על מסמך נאמנות
12:39 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189868.shtml
תלמיד תיכון מרחובות חשוד שהפעיל מעבדה ביתית לזיוף תעודות זהות ואישורי מחלה
12:03 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189856.shtml
הצביעות של רענן שקד: האשים את אמהות 3 החטופים ומגנה את חגי הוברמן
11:43 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189848.shtml
And this is a screenshot i couldnt copy the text of the richTextBox1.Text
richTextBox1.Text content image
co uld be that the format of the text in the combindedString and the richTextBox1.Text looks different so it think it's not exist ?
Update:
Not sure if it's important but the combindedString i'm adding the text to it from the variable ListExtractions.myList
myList is List and i build this List like that:
private void ListToStringList(List<string> myl)
for (int i = 0; i < AllNews.Count; i++)
myl.Add(AllNews[i].text);
IFormatProvider provider = CultureInfo.InvariantCulture;
DateTime myTime = DateTime.ParseExact(AllNews[i].original_time, "DyyMMddTHHmm", provider);
string results = myTime.ToString("HH:mm דווח במקור בתאריך : dd.MM.yy : שעה");
myl.Add(results);
myl.Add(AllNews[i].link);
myl.Add(Environment.NewLine);
myListWithoutLinks.Add(AllNews[i].text);
myListWithoutLinks.Add(results);
myListWithoutLinks.Add(Environment.NewLine);
for (int i = 0; i < myl.Count; i++)
myl[i] = Regex.Replace(myl[i], @"\t|\n|\r", "");
And use it:
ListToStringList(myList);

Is there a way to obtain the text item's value when the mouse pointer at?

Hi,
Is there a way to obtain the text item's value when the mouse pointer at? Mouse pointer may be located somewhere out of current record and even out of current block.

There is a when-mouse-over trigger and that works fine in client-server mode for Forms 5/6/6i, but that is less indicated when deployed using Application Server.
In that trigger you may write whatever code is necessary, restricted package procedures.
Still, I think, for your case, if you do not have to deal with a multi-record block, you should use the HINT property for that item and set_item_property with the HINT argument for that item in order to set the hint to the item's value - this should set_item_property should be called on the when-new-record-instance .

HOw do I create a new PDF file that incorporates the text changes I made in the previous PDF file?

All of my edits appear properly in the saved file but as pop-ups etc. that cannot be seen when I print a copy.
This seems like an obvious thing to want to do, but I cannot find out how to do it from any of the documentation (including video tutorials).

Something to try:
Create a Comment Summary report (a PDF file).
There are several approaches that can be used.
--| Work out of the Comment List (Comments > Comment View > Show Comments List or click the overlapped comment bubbles at the bottom of the Navigation panel)
--| Comments > Show Comments List
--| Comments > Summarize Comments
--| Comments > Print with Comments Summary
In the Summarize Options dialog, select the desired layout, paper size, how comments are to be sorted and font size.
Select Include All comments. If you want to sort by review status, author, comment type, etc then go into the Comments List.
The tool bar provides various means of configuration.
When the Print dialog is present, under the "Properties" button (upper right), use the drop-down menu for 'Comments and Forms' to select "Document and Markups".
The imprint on the paper will have the PDF page content and annotations (comments) provided in the PDF by use of the Text Edit tools.
So, you can provide the text entered into a Text Edit's pop-up two ways.
First - You have the PDF of the Comments Summary Report.
Second - You have the hardcopy of this PDF.
Of note is that, with Adobe's Tech Comm Suite, you can author in FrameMaker or MS Word, output a PDF for comments and review, then bring these comments back into the source authoring file.
Be well...

I have an email thread that has become unprintable (and in some cases unreadable) because each email in the thread is indented and eventually the text is very far to the right margin and even beyond. How do I correct this?

I have an extremely long and important email thread that has become unprintable (and in some cases unreadable) because each preceding email in the thread is indented and eventually the text is very far to the right margin and even beyond. Some of the text is even showing up as only 1 letter per line. I tried selecting all and then left justifying it, thinking that that would shift everything to the left, but it didn't work. When I go to print the thread, it shows as 344 pages, which although long, I can't believe it's that long. What do you think happened to cause this and can it be corrected?

Ick. So it can't just work sensibly? Sensible would be either autosave overwrites previously autosaved versions or all autosaved versions would be deleted when the message is finally sent. Allowing previous message versions to accumulate endlessly might be beneficial to someone, but does not seem like sensible default behavior.

How do I write a vi that will save graph data and text data (related to the graph) so the next time I want to view the graph data the text data is included in the read vi?

I am new at writing vi's and hope you may be able to help. I would like to create a vi that will graph measurements taken from a daq device. I would like to include text data that a user can choose from (example: machine number, test circuit, load cell type) that will stay with the graph so when the graph is viewed at a later time the text data (explaining parts of the graph) will display with the graph data. I have included a vi I am using to capture and display a force value. Any help would be greatly appreicated.
Attachments:
force.vi ‏500 KB

What you want is a DATALOG file:
When you save a file, use the BUNDLE function to bundle your machine number, test circuit, whatever (include a few spare fields), plus your graph data. Get the graph data from the source, or use a local variable of the graph itself.
Wire the bundle output to the DATALOG TYPE of a NEW FILE function. (I presume you'll use a FILE DIALOG set to SAVE FILE to choose a file path).
Write the same bundle output to the DATA input of a WRITE FILE function.
Use a CLOSE FILE function to (ahem) close the file.
When you want to read a file, use a FILE DIALOG set to EXISTING FILE (or some other means) to specify what file to read. Wire the same cluster type to the DATALOG TYPE of the FILE DIALOG, so that it will only
offer files of the correct type.
When you have a file path chosen, wire the bundle to the DATALOG TYPE input of a FILE OPEN operation.
Use a FILE READ to read a single cluster - the output of FILE READ will be a cluster of the right type.
Use a CLOSE FILE function to....
Out of the FILE READ function, you can UNBUNDLE BY NAME the data and send to the graph and the other fields, or, if you're clever, you can use a cluster on the screen, and not unbundle it. That's harder though, since you probably want the text fields to be controls (inputs) and the graph to be an indicator (output).
Hope that helps.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

I am having difficulty including text with iPhotos I want to share through email. I get a red exclamation mark along with a statement stating that the text doesn't fit into the designated text area. This is so frustrating.

I am having difficulty including text with iPhotos I want to share through email. I get a red exclamation mark along with a statement stating that the text doesn't fit into the designated text area. This is so frustrating. Before iLire11 I was easily able to share photos with email messages. Arghhhh!

In the iPhoto preferences you can set Apple Mail as your e-mail client and then it will work exactly as before
LN

Can we have the text and value displayed in the BI Graph ?

Dear Experts,
We are able to see the graph for a particular report in switching to Graphical Display
:I have selected Pie chart and the value and text is displayed on mouse over on each section.
Please let meknow if there ia an option to display the text and value along with the graph.
Regards
Manu

Manu Govind wrote:
Dear Experts,
>
> We are able to see the graph for a particular report in switching to Graphical Display
>
> :I have selected Pie chart and the value and text is displayed on mouse over on each section.
>
> Please let meknow if there ia an option to display the text and value along with the graph.
>
>
>
> Regards
> Manu
Dear Govind,
You can use BEx based WAD tool to acheive it. Edit the chart in the chart properties dialog, goto settings & edit the property. As you have requested you created 2 tabs, one for chart, another for data, and as and when you do changes in the Analysis grid, the chart values get adjusted.
P.S. Humbly a personal opinion; I do not recommend WAD; use XCELCIUS instead.
Best Regards, @{

Float is not working? I need the text to the right of the image but my CSS isn't working. Help pls

Similar Messages

Maybe you are looking for