Flow complete before mapping finished

Hello,
I'm having a really strange case.
I have a process flow that contains 3 mappings in row (no forking). The first mapping takes quite a long time to execute - lets say 2 hours. The problem is that when I start the flow, it completes already after about 10-15 minutes and if I open it in CC, it tells that all 3 mappings have been executed successfully.
When I look in to the target table - it is empty and also I see that there is a database session is active that still runs this flow! After about 2 hours when the mapping should finish, I can see the data in the table and also the database session is gone. Not only CC shows that the flow is complete but if I use this flow as sub-process in another flow, the parent flow will also continue to next step.
Andreas

Yes, look at the transitions.
Another thing we did is clean up the OWB Runtime tables:
owbsys.owb$wb_rt_audit
owbsys.owb$wb_rt_audit_amounts
owbsys.owb$wb_rt_audit_detail
owbsys.owb$wb_rt_audit_executions
owbsys.owb$wb_rt_audit_files
owbsys.owb$wb_rt_audit_messages
owbsys.owb$wb_rt_audit_params
owbsys.owb$wb_rt_audit_struct
owbsys.owb$wb_rt_error_rows
owbsys.owb$wb_rt_error_sources
owbsys.owb$wb_rt_errors
This improves the response of the UI and also the control center.
Regards,
Emile

Similar Messages

How to stop iphone from completing text before i finish typing

how to stop iphone from completing text before i finish typing?

I'm not sure what you are asking here. Can you describe your problem in a little more detail?

Sequence in process flow (output from mapping)

I have a mapping where I am using sequence operator and creating a record in the target table I need to pass this variable out of the mapping and as input to another mapping. I am not able to pass the sequence out of the mapping. How can we assign values to mapping output variables however I do it it says you cannot assign variables to output parameters from the mapping it says.
mapping input parameter and mapping output parameter are intended to be executed before and after the data flow of the mapping and cannopt accept inputs from any part of the data flow.
Any ideas as to how this can be done.
Can a pluggable mapping be called in a process flow.
Thanks
Edited by: user8023060 on Jun 23, 2009 6:08 AM

Hi,
write a plsql-function that executes returns seq_XXX.currval (or, to be on the safe side, select the value from your table).
Assign that value to an output attribute.
And no, pluggable mappings can just be included from other mappings, there is no way to execute them directly.
Regards,
Carsten.

Calling an applescript inside a Javascript, waiting for it to complete before moving on.

I've got a handly little applescript compiled as an app that performs an Adobe Illustrator action which exports the current file's artboard #1 to a specific location at 300ppi. I can even call it from a javascript... which is great because I want a javascript that will loop x times, changing text and exporting on each each loop. But, each loop will export a file with the same name... not a problem, I'll rename the file after each loop, and javascript will wait patiently for me the export to complete before moving on to the next step, right? Wrong! Javascript just keeps moving through the script.
So, how do I get Javascript to wait until the AppleScript completes the export? I can't have it wait a specific amount of time...export might take between 2 and 180 seconds.
My ideas:
1) can the applescript fire some sort of event letting Javascript know to move on?
2) Is there a Javascript equivalent to AppleScripts "do javavscript " command, which would allow me to move the Applescript code into my core javascript?
3) I could kludge a stopwatch on the first loop, checking every 10 milliseconds to see if the exported jpg file has been written... then using that as a baseline timer to pause later loops (not great, because the file will exist while AI writes it, and JS may rename it and try to export the second loop before the first is done).
for (z =0; z<copyArray.length; z++) {
var jpgExt = "-01.jpg";
var newExt = ([z] + jpgExt);
var exportASfile = File('/Applications/Adobe Illustrator CS5.1/Presets.localized/en_US/Scripts/VCS_Specialty Scripts/StandardExport.app');
exportASfile.execute(); // export the file
renamedFile = new File(exportFile); //variable exportFile is a reference to the jpg being written by the export
renamedFile.rename (exportFile.name.replace(jpgExt, newExt)   ); // replaces part of the filename with a new

I'd love to stay in one language, but since we're stuck on CS5 here, I have to make do.
My task for the script:
1) pop up a window to collect: 1a) number of copies, 1b) custom text, 1c) choice of three radio buttons -- I can't figure out how to do this in AS besides popping up three separate dialogs, I have it working great in JS
2) loop step 1, write a named text frame with an array value containing a concatenation of 1a, 1b, 1c -- pretty easy in either
3) loop step 2, export the file at a higher than 72ppi resolution with artboard -- currently controlled by an action, can't be done programmatically in either AS or JS using CS5
4) loop step 3, rename the file to match what was written to the text frame -- again, pretty easy in either
In CS5, neither JS or AS have the ability to control the resolution of a jpg when exporting.... just the scale. So an action is required.
My window JS has some of the basic edittext, statictext, buttons, panels elements, not too tricky:
var win = new Window ("dialog","Cover Copy Builder");
    win.orientation = "column";
    win.add ("statictext", undefined, "Copy and Format Instructions");
    var input = win.add('panel', [0,0,320,300], undefined, {borderless:true} );
    win.add ("statictext", undefined, "Output Summary");
etc.
Is there an AS equivalent to this sort of window building construction?

Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later.

Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later, however there was no problem updating my iPhone to iOS 5 through iTunes connceted to my dell laptop on the same wireless network. What gives?

Try disabling your firewall; both on your PC and the external Firewall/Router.

Process flow completed successfully but flagged as BUSY in OWB ?

Hi, I have several process flow jobs that are scheduled to run each night.
All steps of the process flows completes successfully (checked in Workflow Manager and Warehouse Builder Browser), but the overall status is always set to BUSY in OWB Browser.
I have seen earlier related threads in this forum regarding the termination of jobs left in a BUSY state (through problems with the process flow etc), but why are my jobs being flagged as busy ?
Seems like the completed successful status is not getting through to OWB Browser.
Any ideas ?
Thanks
Paul

Login to SQL PLUS as Workflow owner and run
call wf_purge.Move_To_History(null,null)
Search this forum for posts from Oleg from Kiev. He knows what he is doing and his posts helped me a lot. I have seen few posts from him related to this subject.
Vladimir

Message Split Comes Before Mapping

Hi,
Can anybody explains the following queries....
1.Why Message Split Comes Before Mapping in Pipeline Steps?
2.What do you mean by Collaborative Profile and Collaborative Agreement?
3.What are Context Path, Context Object and Context Handling?
4.Which adpaters run on j2ee engine and which run on ABAP stack.
5.What is the need of datatype when we are creating the message type
6. and similarly what is the use of Business system when we are creating the corresponding Technical system
Thanks n Advance.,
Stallin

>>1.Why Message Split Comes Before Mapping in Pipeline Steps?
Simple. Imagine you have 2 receivers with different mappings. If this has to work correct, XI needs to copy of the source msg for doing the mapping. rite?
>> 2.What do you mean by Collaborative Profile and Collaborative Agreement?
Collaborative profile -->Serivce with out party and service and all the commn channels you create for it.
Collaborative agreement -->Sender & Receiver agreements, that bind your cc with the interface.
>> 3.What are Context Path, Context Object and Context Handling?
Context path- It is Xpath expressions I guess. It is used for specifying conditions in receiver determination and interface determination.
Context Objects -- Used for the same.It reduces the complex Xpath expressions.
>>4.Which adpaters run on j2ee engine and which run on ABAP stack.
All adapters are part of j2ee frame work except IDOC and HTTP adapters. You dont need sender agreements for the 2.
5.What is the need of datatype when we are creating the message type
To get the valid XML structure.
6. and similarly what is the use of Business system when we are creating the corresponding Technical system
Tech systems -->Physical entiteis
Buss Systems --> Logical entities.
Regards,
Jai Shankar
Message was edited by:
Jai Shankar

Is there a way that you can have two different text fields (email, phone) that one at least one of them must be completed before submitting the form? Can it be done using javascript in the validation tab? if so, how?

Is there a way that you can have two different text fields (email, phone) that one at least one of them must be completed before submitting the form? Can it be done using javascript in the validation tab? if so, how?

Here is one solution:
// mouse up action for submit button;
function GetField(cName) {
// get field object for cName field with error checking;
var oField = this.getField(cName);
if(oField == null) app.alert("Error accessing field named " + cName + "\nPleae verigy field name, spelling and capitalizeation.", 1, 0);
return oField;
} // end GetField function;
var oPhone = GetField("phone");
oPhone.required = oPhone.value == oPhone.defaultValue;
var oEmail = GetField("email");
oEmail.required = oEmail.value == oEmail.defaultValue;
if(oPhone.required && oEmail.required) {
app.alert("Missing required fields.", 1, 0);
} else {
app.alert("Submitting form", 3, 0);
// additional code for submission;

Production Order: warning when Basic finish date is before scheduled finish

Hello experts,
We will set in config OPU3 (scheduling parameters for prod order) Adjust dates = 2 Do not adjust basic dates, ... Essentially this will allow the shop floor controller to change scheduled date ie. production dates without affecting basic dates.
With this setup the system may display in the header of an order the scheduling note "Basic finish date is before scheduled finish" as well as generate a scheduling log "Scheduled finish is after basic finish date" (message 36 mess class C7).
These messages are not enough visible for our planners. I would like to find a way to generate a warning before save. I tried to add a record in OPJB: message class CO no. 533 "Scheduled date & is after the requirements date &" but this doesn't work.
Note: I tried to add message class C7 no 36 in OPJB but got the error "Please enter a legal value".
Have you been able to add message in table OPJB ? Is it a good idea or the only option is enhancement?
Thanks for sharing your ideas.
Francois P.
Edited by: Francois Paquet on Sep 30, 2010 5:30 PM

Hi Francois
I'm trying to do the same (also for C7 035).
Have you already found out how to do this?
Arno

I am getting a message the something called Completer wants to finish installing. I get this whenever I log in. What the **** is it?

I am getting a message the something called Completer wants to finish installing. I get this whenever I log in. What the **** is it?

It's adware. Click here and follow the instructions, or if they don't cover that specific type of adware, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(119897)

TS3274 I get on the internet with my Ipad3 and when I start typing in the search box the ipad guess' what I want before I finish typing and goes to the internet. How do I fix that?

I get on the internet with my Ipad2 and when I start typing in the search box the ipad guess' what I want before I finish typing and goes to the internet. How do I fix that?

Yes if you purchase the tethering data plan for your iPhone. See:
iPhone: System requirements for Personal Hotspot

I purchased a soundtrack on iTunes (Windows 7) and five of the songs that downloaded get cut off before they finish playing...any idea how to get it fixed?

I purchased a soundtrack on iTunes (Windows 7) and five of the songs that downloaded get cut off before they finish playing...any idea how to get it fixed?

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

HT1711 some of the songs in my Itunes library jump to the next song before it finish. What can I do to fix this problem?

Some of the songs in my Itunes library jump to the next song before it finish. What can I do to fix this problem? Please help!!

Hi bibijc!
I have an article here that addresses your issue, and can give you some helpful troubleshooting steps for resolving the issue:
Troubleshooting songs that skip
http://support.apple.com/kb/ts3217
As a secondary troubleshooting step, you may also need to recreate your iTunes library. This can be done by following the instructions in the following article:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Thanks for coming to the Apple Support Communities!
Regards,
Braden

How prevent movie from loading completely before playing?

Hi,
how do I prevent an swf from loading completely before
starting to play in the browser? When simulating a download in the
Flash application, several preload stages work perfectly, but not
in the browser. Preload stages don't appear, instead it takes ages
for the 3.5 mb file to completely load before displaying the first
frame of the movie.
I have tried inversing the load order in export settings and
different flash versions, but just can't get it to work.
Can someone help? Thank you!

hi kglad
I thought it should be that way; the point is that I don't
want to add code that loads the entire movie before starting to
play the first frame, but only a certain number of frames (i.e. 11
out of 35, for example). I'm trying to do this with this code in
the first frame:
ifFrameLoaded (11) {
gotoAndPlay("start");
in the simulation, it works perfectly, but when uploading the
movie and viewing it in html, the entire thing loads, and the
preloader doesn't appear.
Many thanks for your help.

Parent Request Completes before child

Hi All,
I have created a UNIX shell script that calls a sql script and it submits 3 concurrent request. The UNIX shell completes before the 3 concurrent request and i can not move my log files in the specific folder as they are not created till now.
Is there a way, that i can make the UNIX shell script as pending until the 3 concurrent request gets over?
I thought of creating another shell script that will be called after the 3 concurrent requests but i think there should be a better way of doing this.
Any idea would be really appreciated.....
TX
K

the only way to be certain that the database save is complete, is to return from that call.
So it could return a page with an onload event which closed the child window, and refreshed the parent pane.
ie
rather than doing
save()
reloadParent()
close()do
save()
(save call returns with html page to child window)
(onload event of this form: )
reloadParent();
close();

Flow complete before mapping finished

Similar Messages

Maybe you are looking for