Flowed content Area ---urgent

Hi Experts,
I have master page with header and footer , and flowed content area which much dispaly table with dynamic table , if I make the
content area fit for one record the table just dispaly one record , and if I make it for ex. fit for 6 records ,if less than 6 come
the remaining space appear befor the footer , I want the footer come directly after last record how I do that , although I set the
page flowed and I wrap the table in flowed subform!
thanks in advance
Edited by: Ghadeer Zahalqa on Jan 8, 2012 11:30 AM

Can't you put the footer inside the same subform your table is?
Also, check you are using Top-to-bottom instead of western flowed.
Cheers,
Andres.

Similar Messages

How to have dynamic size of the content area

Hello everyone
I am trying to create a printable adobe form using Adobe LiveCycleDesiner 8.
Here is my problem.
The PageMaster is containing the company Logo, Address and the ship to address.
The ship to address can be composed by up to 11 lines. Those lines are not always used. Some addresses have only 5 lines.
If I am reserving those 11 lines before the content area, we are loosing alot of space that can be used for the body page.
So the question is:
Is it possible to have a flowed content area? Where the size of the content area would be driven by the available space of the PageMaster?
Regards
stjacqd

Hello Carsten
The subform has no impact to the content area size.
The subform has an impact only inside the content area or inside another form.
My point is:
PageMaster
| Logo                                          |
| Address1                   Address      |
| Address2                   Address      |
| Address3                   Address      |
| Address4                   Address      |
| Address5                   Address      |
| Address6                   Address      |
| Address7                   Address      |
| Address8                   Address      |
| Address9                   Address      |
| Address10                 Address      |
| Address11                 Address      |
|---------------------------------------------------|
| Content area                               |
|                                                   |
So, inside the Page Master there is 11 lines reserved for the addresses,
But at the printout, if there are only 3 lines used for the address, I would like to reassign the space used by the address4 through adderss11 to the content area.
So the result at printout will look like:
| Logo                                          |
| Address1                   Address      |
| Address2                   Address      |
| Address3                   Address      |
|---------------------------------------------------|
| Content area                               |
|                                                   |
Instead of:
| Logo                                          |
| Address1                   Address     |
| Address2                   Address     |
| Address3                   Address     |
|                                                   |
|                                                   |
|                                                   |
|                                                   |
|                                                   |
|                                                   |
|                                                   |
|                                                   |
|---------------------------------------------------|
| Content area                               |
|                                                   |
Regards

URGENT : On clicking back button of IE error message in the content area

Hi all,
On clicking of a link in my navigation area KM folders are displayed in the content area via a KM iview. On 1st level navigation in this iView and clicking the explorer back button there is no problem. But if we navigate to inner folders and click on back button I get a warning in the Content Area:
" Warning: Page has Expired The page you requested was created using information you submitted in a form. This page is no longer available. As a security precaution, Internet Explorer does not automatically resubmit your information for you.
To resubmit your information and view this Web page, click the Refresh button."
This is not the case when I navigate through Bread Crumb.
The isolation method for my iView is Embedded and for my Page is also Embedded.
Please reply soon.
Thanks and Regards,
Sweta.

I am pretty sure that nothing can be done about this. A Lot of other websites/applications also have this same problem. You try playing with the browser cache settings so that the back button doesn't try and get the page from the cache. You could also try and experiment with the cache-control and expires HTTP headers, to see whether this has any effect.
Other than this, I am unsure as to whether it can be resolved
Sorry
D

The 'Edit folder' link doesn't appear in content area portlet (URGENT)

Hi! I made three content areas, and published them as portlets in a page. However, when I enter the page as an authorized user, I don't see the 'Edit folder' link on any content area portlet. But if I enter to any of the content area pages with the same user, I see the link
Is this a bug? What could be the reason?
Thanks a lot!
Luis

try this...
Edit the page where you added the portlets. Click the edit defaults link next to each of the portlets and scroll down to make sure the show Edit Link checkbox is checked. I don4t see any Edit Link checkbox when I edit the portlet's defaults!!
What should it be?

Alternatives to content area pages? URGENT!!

Hi...
I am implementing a site in Portal with a static navbar on the
left side with links to folders... this navbar will remain
static, the content that changes is in the rigth side..
If I make a new page from scratch, including the navbar and the
content area as portlets, when I click on a link on the left,
the page banner and the other portlets disappear, and appears
the content area page..... I read that the only way you can keep
that page appearance is to customize the content area page
itself.
Are there any other ways to do this? (not depending of the
content area page??)
Please, I need help ASAP!!

Not in the current release. The next release of Portal, planned
for early 2002, will make this a lot easier.
Regards,
Jerry

Rate it Link for items in a content Area

Hi,
How do I add a rate it link for all items in a content area and track the rating for items by all the users. This is urgent and any help is appreciated
Thanks
Makario

You need to create a custom item type, with a procedure that displays a link to do the rating.
For an example of a custom item type procedure, see Re: personal oracle 9i
Note that the primary key for an item is (masterid, id, caid, language).

Cannot publish a folder in my content area as a portlet

All,
Has anyone out there experienced or encountered the following problem depicted below. If yes, please let me know what you did or what steps/procedures you implemented to resolve this problem.
1. Go to content area an click the "Edit Folder" link.
2. Click the "Create Folder" link an select "container" as your folder type.
3. Click the next button and enter your folder display name and internal name. Leave the Category combo box as is General).
4. Click the finish button.
5. Edit the new folder.
6. Under the "Portlet Properties" section, set the "publish as portlet" checkbox.
7. Click the "Apply" or "Ok" button.
When I click the "apply" or "Ok" button, I receive the following error message:
Error: (WWS-00000)
Copyright) 2001, Oracle Corporation. All Rights Reserved
Location: PORTAL30.wwv_main.main?p_language=us&p_cornerid=11470&p_edit=1&p_siteid=35&p_currcornerid=11470&p_calledfrom=1
I then click the "back" link on this error page that takes me back to the folder properties page. When I click the "apply" or "ok" button again, I am taken back to my content area page, which is the normal way for this process to work.
When I try adding a "URL" item to this folder, I get a blank page after hitting OK.
Next, I then try to add this folder as a portlet on my page. This folder portlet does not appear in portlet repository.
I subsequently go to the portlet repository and click the "refresh" link. I again encounter the following error message:
Error: (WWS-00000)
Copyright) 2001, Oracle Corporation. All Rights Reserved
Location: http://www.reeis.usda.gov/servlet/page?_pageid=52&_dad=portal30&_schema=PORTAL30&_type=site&_fsiteid=2&_fid=1&_fnavbarid=1&_fnavbarsiteid=2&_fedit=0&_fmode=2&_fdisplaymode=1&_fcalledfrom=1&_fdisplayurl=
Oracle support is currently working on this problem through metalink. But, if anyone out there has encountered this problem and had it resolved, can you please forward your solution to me.
This is very urgent.
Abrom

In the Catalog, select the folder for the report(s) you want to update in the Folders pane. It should then appear in the Tasks pane (bottom left) with some options.
Select 'Permissions' and make sure that 'Hidden' attribute is unchecked. That worked for me.
There's also a 'Show Hidden Items' check box at the top right of the Catalog area that should be checked to view the filters in the Catalog area (rather than when ediiting a report).
Edited by: Raj on Apr 11, 2013 2:44 PM

How to portlets in to content area folders

hi everybody,
i need to add portlets into the content area folder.
Like, how we add portlets into pages(add portlet link).
is that possible? It is very urgent for me.
becz. i developed application using pages at first.
so that i can create user wise portlets,that means, one page for
all my users. but portlets display will vary according to the
privilegs.now i need the same thing in content area.
pl. help me ASAP!
thanks in adv.
Kathir

Portlets can be added to the content area page. You can edit
this page under Content Area Properties. Note that the content
area page does not have all the functionality of a portal page -
for example, it doesn't support tabs and you can't define a
style.
In the next release of Portal, content area folders and pages
will be merged. The merged folder/page can be used for both
portlets and items.
Regards,
Jerry

Content Area: Cannot edit/drill down to folders at the lowest level

URGENT: Need your help.
I am using Oracle Portal 3.0.6 (Production) installed on Win NT 4.0 Server with Oracle 8.1.7. I am working on hosting a website for my development group.
I created a Content Area and associated it with a page style. Then I created numerous folders to meet the requirements of the various product teams working in my team. Under each folders, I created various sub-folders. Now I want to add items under each folder I created. Earlier, using the link "Edit Folder", I could do by clicking on the folder under which I wanted to create an item. Now when I click on the folder, it returns back the same page showing all the folders along with the icons meant for "Edit", "Add", "Delete", "Move" and "Copy". Nothing is happening and I am stuck here. It displays all the sub-folders with links upto 2-level, since I set the navigator property to the level 2. But I cannot navigate to the sub-folder created at the third level by clicking on the sub-folder link above it (at the 2-level) and add any items under the clicked folder.
Only mistake I could think about was by mistake, I tried to delete a content area which was created for test purpose. There were folders created under this. But I attempted to delete the content area directly without deleting the folders underneath. I got an error saying ".... child records exist". Later while clicking on the tab "content area", I was getting the following error:
An unexpected error ORA-06503: PL/SQL: Function returned without value occurred when executing action of the SITE datasource. (WWC-38130)
(WWS-00000)
Error:No data found (WWS-32101)
ORA-1403: ORA-01403: no data found
ORA-01403: no data found (WWC-36000)
normal, successful completion (WWS-00000)
All product teams already submitted the contents they want me to put on the folders but I am unable to resolve the above problem. Any help / pointer to the above issue will be highly appreciated.
Thanks in advance
Jay

Hierarchy keys are set properly and "use for display" is checked.
Dimension presentation hierarchies does not work only when I use particular two hierarchies togather in one report table. When each of hierarchies is displayed separately it works ok.

Dividing Spry Tabbed Panels content area into columns?

Hi there.
I am building a website and I want to divide the content area of a Spry Tabbed Panel into 3 columns for text.
How can I do this?
I thought about making divs inside the Panel but it would be too messy.
Please let me know if there is a simple way to do this.
Thanks in advance.

<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<script src="SpryAssets/SpryTabbedPanels.js"></script>
<link href="SpryAssets/SpryTabbedPanels.css" rel="stylesheet">
<style>
* {box-sizing: border-box;}
body {width: 960px; margin: auto;}
.TabbedPanelsContentVisible {overflow: auto;}
.col33 {width: 33.3333%; float: left; padding: 15px;}
</style>
</head>
<body>
<div id="TabbedPanels1" class="TabbedPanels">
<ul class="TabbedPanelsTabGroup">
    <li class="TabbedPanelsTab" tabindex="0">Tab 1</li>
    <li class="TabbedPanelsTab" tabindex="0">Tab 2</li>
</ul>
<div class="TabbedPanelsContentGroup">
    <div class="TabbedPanelsContent">
        <div class="col33">
          <h3>Column 1</h3>
        <p>Content 1</p>
        <p>Dicta sunt explicabo. Nisi ut aliquid ex ea commodi consequatur? Neque porro quisquam est, aut odit aut fugit, ut aut reiciendis voluptatibus maiores alias. Iste natus error sit voluptatem dicta sunt explicabo. Sed quia consequuntur magni dolores eos itaque earum rerum hic tenetur a sapiente delectus, cum soluta nobis est eligendi optio. Omnis voluptas assumenda est, nemo enim ipsam voluptatem neque porro quisquam est.</p>
        <p>Eaque ipsa quae ab illo inventore veritatis totam rem aperiam, qui ratione voluptatem sequi nesciunt. Consectetur, adipisci velit, aut odit aut fugit, ut enim ad minima veniam. Id est laborum et dolorum fuga. Atque corrupti quos dolores et quas molestias qui ratione voluptatem sequi nesciunt. Temporibus autem quibusdam saepe eveniet ut et voluptates repudiandae sint sed quia non numquam eius modi.</p>
      </div>
        <div class="col33">
          <h3>Column 2</h3>
        <p>Content 1</p>
        <p>It is the star to every wand'ring bark, which alters when it alteration finds, love alters not with his brief hours and weeks. Or bends with the remover to remove. That looks on tempests and is never shaken; admit impediments; love is not love let me not to the marriage of true minds.</p>
      </div>
        <div class="col33">
          <h3>Column 3</h3>
        <p>Content 1</p>
        <p>The three cs - customers, competition and change - have created a new world for business while those at the coal face don't have sufficient view of the overall goals. In order to build a shared view of what can be improved, building a dynamic relationship between the main players. Highly motivated participants contributing to a valued-added outcome.</p>
        <p>Whether the organization's core competences are fully in line, given market realities the components and priorities for the change program an important ingredient of business process reengineering. Taking full cognizance of organizational learning parameters and principles, organizations capable of double-loop learning, working through a top-down, bottom-up approach. In order to build a shared view of what can be improved, maximization of shareholder wealth through separation of ownership from management measure the process, not the people. Presentation of the process flow should culminate in idea generation, taking full cognizance of organizational learning parameters and principles, the components and priorities for the change program. An investment program where cash flows exactly match shareholders' preferred time patterns of consumption from binary cause and effect to complex patterns, working through a top-down, bottom-up approach.</p>
      </div>
    </div>
    <div class="TabbedPanelsContent">Content 2</div>
</div>
</div>
<script>
var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1");
</script>
</body>
</html>

Multi lingual support in Portal Content area

hi Oracle Experts,
i have developed a portal content area in US English.
now i need to translate the content into
Arabic.
could anybody give me Translation Procedure in Portal.
it is very very urgent,
nice to be expecting!!
null

Kathir,
Please refer to the Oracle Portal FAQ.
However, Arabic is not supported until the 3.0.9 release, planned for June 2001.
Regards,
Jerry
null

Adobe Form - Content Area can't be moved

I'm working on an ADOBE invoice form. I set up the company logo, ship to and sold to address and footer as boiler plate objects on the master page. The other data like table header and line item data are in the body page (which is flowed) that I call " Main". Now my problem is: I want to make the item data print starting from 10 cm from the top.I cannot move the content area down to the 10 cm level so now my MAIN body page starts from X and Y coordinates = 0 and the data starts printing from that position spilling over the logo and all other header data. I tried leaving the content area alone and only move the MAIN body page. It does not move down either. How do I fix this problem? Is the content area not supposed to be moved down or do I have a bug in my designer? Thanks.
Other details: EEC6.0 NW2004s, Livecycle Designer 7.1, Windows XP professional.

Thanks both of you. I think my question is answered. It is possible to move and resize the content area in the master page. I tried it but does not still work for me. I changed the underlying XML file and the content area moved so I think it is definitely a problem with the designer. Thanks.

Problem with multiple content areas

Hi,
I'm stuck with following problem. I need to build the form that should contain two logical areas on the each page. Main area should handle main form content (long table) and another area containing barcodes(dynamic list that should be filled from xml). Each area must be flowed cause both table and barcodes data may be longer than their subforms.
I've made one master page with two content areas on it.
I've made main form page with two flowed subforms and customize their pagination so that each subform overflow be directed in corresponded content area.
It's seems like all ok, but here's the problem:
While the table data gets overflowed to next page, the barcodes data starts to filled ONLY when the table data ends.
e.g. I've got 3 pages of table data first and more 2 pages of barcode data next instead of only 3 pages with all data compiled together.
Can you help me with this issue?
Thanks!

Thank you for quick answer!
sad to hear that such a logical way of solving the problem is impossible in LC..
Maybe you can help me to find a right way?
little more details about my issue:
I need to manage the form so that it could include both table and barcodes(list) items (while each of them may flow onto multiple pages of the form). E.g. table lasts 4 pages and barcodes lasts only 2 pages.
Table and barcode items are filled from xml file.
e.g.
123456
I've make a sketch of desired form layout:
http://www.ljplus.ru/img4/_/a/_a_lexx/form.gif
Please, help me to find right way of doing this?
Thank you!!

Resizing of content areas

Hi there,
I´m currently faced with the situation, where I have to put some dynamic content on a master page, which can expand it´s height. This leads to the problem, that I´m forced to dynamically resize the content area for the page content to prevent overlapping.
Is that possible in general? I haven´t found any layout strategies to solve that and my trys to set it via JavaScript fail. The dimensions and coordinates of the content area are read only or rather the assignments are just ignored.
Any idea on how to handle that?
Thanks and greetings,
Joerg

Thanks for the statement...I was afraid to hear that -.-
Sure, all my dynamic content is built with flowed containers. The problem is, that I have repeated content, which should display on all body pages. In general, there would be the solution to use overflow headers to solve that. But I have found a strange behaviour of nested headers some time ago (http://www.adobeforums.com/webx/.59b6446b/4) and until now, there is no solution for that. Therefore, the content has to be on the master pages to avoid that problem. But without the chance to dynamically adjust the content area, I´m stuck with it.
Are there any layout strategies to solve that?
Thanks and greetings,
Joerg

Adobe Form - Content area can't me moved

I'm working on an ADOBE invoice form. I set up the company logo, ship to and sold to address and footer as boiler plate objects on the master page. The other data like table header and line item data are in the body page (which is flowed) that I call " Main". Now my problem is: I want to make the item data print starting from 10 cm from the top.I cannot move the content area down to the 10 cm level so now my MAIN body page starts from X and Y coordinates = 0 and the data starts printing from that position spilling over the logo and all other header data. I tried leaving the content area alone and only move the MAIN body page. It does not move down either. How do I fix this problem? Is the content area not supposed to be moved down or do I have a bug in my designer? I posted this in the "form printing" forum too.
Thanks.
Other details: EEC6.0 NW2004s, Livecycle Designer 7.1, Windows XP professional.

Hello,
You can do any of the following for your requirement:
1) You can change your Body page (MAIN) to have u201CPositionu201D Layout. Then you should be able to move your fields down.
OR, If you require MAIN to have Flowed Layout then do the following.
2) Create a new subform within the MAIN SubForm (lets call it MAIN_POS). Then set the Layout of this new Subform to Position. Then place your fields in MAIN_POS subform, and move them down.
Hope this helps,
Harman.

Flowed content Area ---urgent

Similar Messages

Maybe you are looking for