Problem with multiple content areas

Hi,
I'm stuck with following problem. I need to build the form that should contain two logical areas on the each page. Main area should handle main form content (long table) and another area containing barcodes(dynamic list that should be filled from xml). Each area must be flowed cause both table and barcodes data may be longer than their subforms.
I've made one master page with two content areas on it.
I've made main form page with two flowed subforms and customize their pagination so that each subform overflow be directed in corresponded content area.
It's seems like all ok, but here's the problem:
While the table data gets overflowed to next page, the barcodes data starts to filled ONLY when the table data ends.
e.g. I've got 3 pages of table data first and more 2 pages of barcode data next instead of only 3 pages with all data compiled together.
Can you help me with this issue?
Thanks!

Thank you for quick answer!
sad to hear that such a logical way of solving the problem is impossible in LC..
Maybe you can help me to find a right way?
little more details about my issue:
I need to manage the form so that it could include both table and barcodes(list) items (while each of them may flow onto multiple pages of the form). E.g. table lasts 4 pages and barcodes lasts only 2 pages.
Table and barcode items are filled from xml file.
e.g.
123456
I've make a sketch of desired form layout:
http://www.ljplus.ru/img4/_/a/_a_lexx/form.gif
Please, help me to find right way of doing this?
Thank you!!

Similar Messages

Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
error, Location: 2'
When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
were illegible, but no other weirdness was observed.
I have microsoft 2008 installed on my Mac OS X version 10.6.8.
I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

Hi,
This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
Please use the "Fix it" tool in the following KB article to resolve the problem. See:
http://support.microsoft.com/kb/2528942
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

The file .docx cannot be opened because there are problems with the contents in sharepoint document library

I created a site and created a document libarary and assigned a word document as a content type . I have written a workflow to create a new document . The workflow is working fine and all the document is getting created and values are getting stored
in it .
As per my requirement I am saving the above site as site template .
After that I am creating a new site based on the above site template , Its getting created and I started the workflow , its working fine and the document is also getting created .
The problem is I am getting error while opening the word document
Error - The file filename.docx cannot be opened because there are problems with the contents .
Details - No error details availble .
Indresh

What are you doing within the txt document? Is it general text and string based items, or have you something more elaborate going on?
An older discussion here elaborates a bit more on the dotx vs docx side of things.
http://social.msdn.microsoft.com/Forums/en-US/de1b5ff9-ea6d-460c-a707-8c28acd4906f/error-opening-office-open-xml-file-when-using-sd-workflow-to-create-item-in-document-library?forum=sharepointcustomizationlegacy
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Cannot open Word File because "there are problems with the contents"

Hi Everyone,
I cannot open Word File because "there are problems with the contents" unspecified error; Location: 2. Please help as I need this doc for work meeting this morning. Nothing special about this doc but links were copied into it??? However I do that all the time. I have never had this happen before. I am on a 2010 machine. I just ran a disk permissions repaired and emptied the trash but still no dice. I had several other word docs up as well when I got up this morning but they are all fine. I do not have Time Capsule turned on (which I need to do but that will be another thread/question).
Thank you,
sb

Ok, I found a way to open this but not sure what happened to begin with and the formatting setup is different now, almost like text editor? Not sure what happened here but hope it doesn't happen again?

Error while posting Customer with Multiple sales areas using DEBMAS05.

Dear experts,
We are generating IDOCS vis SAP DS for posting Customer master. The message type used is DEBMAS and basic type is DEBMAS05. we have a requirement to create 1 customer with multiple sales areas. However, we are ending up with a strange error: "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1". Despite the IDOC going into status 51, the customer gets created and the 1st sales area too. the 2nd sales area however is not created! The IDOC data definitely contains Name1, otherwise the customer would not have been created in the first place.
As the error message is related to the Address data, I also explored upon exploring this erorr further on the lines of Central Address management where in the ADRMAS and DEBMAS have to be passed together(IDOC Serialiization). OSS Note (384462) provides further details about this. One Important point from the note is:
"As you have to specify the logical name of the sending system among other things, SAP is not able to make any default settings in the standard systems. When you use the serialization groups delivered as a standard by SAP, the address objects are imported before the master objects.Thus the sequence address data before master objects must only be adhered to if one of the following points applies to your application:
Such fields are set as required entry fields that are only provided by the BAS in the Customizing of the customer or vendor master.
For your customers, contact persons exist to which a private address or a different business address is assigned.".
This is not the case in our situation, as we do not have required entry fields in customizing that are only provided by the BAS, so the error is all the more confusing and I am not too sure what the cause is.
If someone have experienced the same issue before and have found a solution to it, kindly help out.

I have found the cause and solution to this problem.
This error ”Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1” and other similar errors like “Fill all required fields SAPMF02D 0111 ADDR1_DATA-SORT1“ which occurrs during the IDOC posting when there are more than one sales area or company code occurs when the customer number range is set up for Internal numbering. This means, that the number gets generated only at the time of save and upon debugging the IDOC, we found out that after creating the customer and the first sales area/company code record, the segment E1KNA1M is cleared completely! This is the reason, it throws an error which points to a mandatory KNA1 field as missing. (Like NAME1, SORT1 etc.)
This was resolved by splitting the IDOC into 2.
The solution is to First post only the KNA1 segment and create the customer.
In the second step, pass the IDOC with all other segments along with E1KNA1M, but pass only KUNNR in E1KNA1M and the rest of the fields in E1KNA1M as “/”: you would have got the KUNNR after the first step.
Important note: This requirement to split the IDOCs does not occur when the customer number is known upfront. (Meaning cases where the customer number is externally generated) I also tested this and created a customer with external numbering and I was able to post more than 1 sales area with the same IDOC.
I noticed multiple threads with the same issue, but none of it had a concrete answer. I hope this information will be useful for anyone facing similar problems.
Cheers
Venkat

Document Creation error - "We're sorry. We can't open document name because we found a problem with its contents"

Morning Friends,
I have created a SharePoint 2010 "Site Workflow" that is designed to take information from a form and create a Word doc with the gathered information and store this Word doc in a document library.
I am using Sharepoint 2013 with Office 2013
I understand there are a lot of steps (19) outlined below and I can provide more information as needed but the bottom line is this, workflow successfully takes info from an initiation form, uses the info to create a Word doc. Places this Word doc in a library.
When attempting to open / edit doc, receive error
"We're sorry. We can't open <document name> because we found a problem with its contents"
Details - No error detail available.
Any info or advice would be greatly appreciated.
Very high level view of what I have done:
1 - Created content type called "Letters"
2 - Added site columns " First Name" and "Last Name"
3 - Created and saved to my desktop a very basic Word document (Letter.docx) that says "Hello, my name is XXXX XXXX"
4 - In the advanced settings of the "Letters" content type I uploaded this "Letter.docx" file as the new document template.
5 - Created a new document library called "Letters"
6 - In Library Settings - Advanced Settings, clicked "Yes" to enable the management of content types.
7 - Then I clicked "Add from existing content types" and added the "Letters" content type
8 - Back in the advanced settings of the "Letters" content type I selected "Edit Template" and replaced the first XXXX with the Quick Part "First Name" and the second XXXX with the Quick part "Last Name"
9 - Created a new 2010 Site workflow called "Create a Letter"
10 - To the workflow I added the action "Create List Item"
11 - Configured the action to create Content Type ID "Letters" in the document library "Letter"
12 - For the "Path and Name" I gave it a basic name of "Letter to"
13 - The next step was to create the Initiation Form Parameters and added to form entries "First Name" and "Last Name"
14 - I then linked the initiation form fields to the data source "Workflow Variables and Parameters" to their respective Field from Source parameters
15 - Went back to the "Path and Name" and modified the basic name of "Letter to" to include the first and last name parameters.
16 - Saved - published and ran the work flow.
17 - As expected, Initiation Form prompts for First and Last Name. ("John Doe") Then click "start
18 - Go to document library "Letters" and see a new Word document created titles "Letter to John Doe"
19 - Go to open / edit the Word document and receive the following error
thoughts? Any info or advice would be greatly appreciated.

See this MS support article for SP2010 workflows and generating Word docs:
https://support.microsoft.com/kb/2889634/en-us?wa=wsignin1.0
"This behavior is by design. The Create
List Item action in the SharePoint
2010 Workflow platform can't convert Word content type file templates to the correct .docx format."
I've had success in using SP 2013, Word 2013 (saving a .docx as the template instead of .dotx for the document library content type), and an SP 2010 workflow using SP Designer 2013.

Problem with File Content Conversion

Hi All
I am facing a problem with file content conversion.
This is my sample file structure:
Header_Record (Occurance - 1)
Field1 in Header
Field2 in Header
Item(Occ-1 to n)
Field3 in Item
Field4 in Item
<<ItemType>> (Structure in Item) (Occ - 0 to n)
<<Field5>> in ItemType
<<Field6>> in ItemType
<<ItemTypeCategory>> (Structure in ItemType)(Occ - 0 to n)
<<<<Field7>>>> in ItemTypeCategory
<<<<Field8>>>> in ItemTypeCategory
Footer_Record (Occurance-1)
Field9
Field10
There is a key field 'Type' in all the above records with unique value in each record.
Now, I defined Field content conversion as follows:
Recordset Structure: Header_Record,1,Item, * , ItemType, * ,ItemTypeCategory, * ,Footer_Record,1
Recordset Sequence: Ascending
KeyField Name: Type
Following are parameters defiled:
Header_Record.Keyfieldvalue: 00
Header_Record.fieldseperator: ,
Header_Record.fieldnames: Field1,Field2
Header_Record.endseperator: 'nl'
Item.keyfieldvalue: 05
item.fieldseperator: ,
item.fieldfieldnames: field3,field4
item.endseperator: 'nl'
ItemType.keyfieldvalue: 10
itemType.fieldseperator: ,
itemType.fieldfieldnames: field5,field6
itemType.endseperator: 'nl'
ItemTypecategory.keyfieldvalue: 15
itemTypecategory.fieldseperator: ,
itemTypecategory.fieldfieldnames: field7,field8
itemTypecategory.endseperator: 'nl'
Footer.keyfieldvalue: 20
Footer.fieldseperator: ,
Footer.fieldfieldnames: field5,field6
Footer.endseperator: 'nl'
Now, i pass the following file:
00,111
05,222
10,333
15,444
20,555
What i expect out of my FCC is this (Sample output to show the hierarchy of field values):
00,111
05,222
<<10,333>>
<<<<15,444>>>>
20,555
But, I am getting this output (Hierarchy is missing. All the structures are in the same order without hierarchy):
00,111
05,222
10,333
15,444
20,555
Field values are being identified according to field content conversion, but, the hierarchy of the fields is missing.
Can you please tell me how should i change my FCC config?
Sorry for this long question.
Many Thanks
Chandra
Edited by: Chandra Sekhar H on Jan 30, 2009 7:10 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:16 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:17 PM

You will always get a flat structure from FCC. If you want hierarchichal strucuture, you have to create a target and map. You will get only like -
Root
--Recordset
Group1
Fields
Grop2
Fields
Group3
Fields
VJ

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

Problems with html content in box

Hi! I have a problem with html content. For example photoswipe. If I import the folder with the index.html of photoswipe as an article all works fine. If I link it trough the folio overlay creator/webcontent) into a box in indesign dps, it stays empty. Seems like it doesnt find the images/paths??
Klaus

This sounds familiar. PhotoSwipe doesn't seem to like working in a web content overlay unless the JavaScript and other source files are uploaded within HTMLResources. This means editing your local HTML file so that paths to the JavaScript, images and CSS files begin by pointing to HTMLResources virtual folder (../../../HTMLResources/) before their subfolder and filenames. It's worth a try.

DSD route settlement with multiple sales are

Hi folks,
I have looked in this forum for an answer for my problem but haven't found any, so i am creating this new thread.
Well i am trying to settle a shipment in /DSD/DE_ENTRY transaction with multiple sales area in it, example:
Visit 1 - Sales Org(D002) Distribution channel(GN) Division(GA)
Visit 2 - Sales Org(D002) Distribution channel(GN) Division(GB)
Visit 3 - Sales Org(D017) Distribution channel(17) Division(D1)
The problem i get is that when i settle the shipment he mixes up the sales area in the visits, so far, allways in visit 3 where he puts up D002, 17, D1, giving the error of non existent sales area when trying to create the order(he doesn't mix up for all orders, only for some ones in the visit).
Another strange fact is that i made 3 shipments with same data, and in all 3, he mixed up for different documents, in 1 he created 2 documents fine, in other one only 1, making me believe that he "randomly" atributes the sales area.
What i need is to "manipulate" or have a solution for standard doesn't mix up the sales area, and atribute the correct sales area to the orders to create based on the sales are in the visit.
Best Regards.

Thanks for the link, it's more or less the functionality that I'm looking for but the issue with BW is that I need to do the Settlement at the moment that routes are arriving "on line" and with BW I need wait the load to BW system. A lot of routes are arriving frequently.
¿Do you know a R3 functionality for this? or ¿do you know a "Shipments settlement" who has all Shipments of the route? in order to use same transaction that is by transport.
Thank's a lot

Problem with multiple versions of documents being published with 001, 002, etc.

I am using Contribute CS3. I am having a problem with multiple versions of documents being published on the sever with 001, 002, etc in the name. So that I end up with 2 or 3 versions of a document on the server. Does anyone know why / how Contribute is doing this? Thanks for any help you can give.

Your Web site administrator will need to update your key to allow you to delete files you are able to edit.

"The file .docx cannot - problems with the contents."

Word 2007 file HELP!
I started a paper this morning and saved it as normal, however when I try to reopen it I get the following messege: The file .docx cannot be opened because there are problems with the contents. Does anyone know how to resolve this issue?

Hi,
Please check if this applies:
http://support.microsoft.com/kb/2528942
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Problems with multiple idocs in one file ( Inbound file )

HI,
Thanks in Advance for your suggestions.. Highly appreciated.
We have problems with multiple IDocs in one file.
We are using XIB ( Amtrix ) as Middleware to receive the files.
Curretenly When the file contains one IDoc then there is no problem. IDoc is created and everything is ok.
If file contains two IDocs ( for example two messages ORDERS and DELVERY ) then it is creating two IDocs but both IDocs contains ORDERS plus DELIVERY segements information. That is the problem. Some how SAP unable to differentiate the IDocs in the file.. But it knows that how many idocs are there in the file..because it is creating exact number of idocs.
We are using TRFC port ... Do I need to change it to File port..
When we have more than one idoc do we need set any parameter in the file ...

Thanks for the swift response. Always ideas are useful.
As of now , Middleware cannot split the file.
Thing is SAP is creating two Idocs with different message types. Problem is First IDoc contains ORDERS message type but also DELIVERY segments as well. Second IDoc with DELIVERY message tyoe but ORDERS segments as well... This is the problem... I think we are missing some field activation in file for EDIDC record.
As far as I know file port supports the number of IDocs in one file.. Hope TRFC port also supports that

Problem with multiple forms and subview

I have a problem when using NetBean Web Pack (JDK6, Net Beans 5.5, JSF 1.2).
1) I created a JSF page (hello.jsp) and a page fragment (header.jspf) inside Web Pack, and let the JSF page (hello.jsp) includes the page fragment.
2) The include instruction is outside of the "form" element id=main_form() of the first JSF page.
3) Inside the page fragment (header.jspf), I put a form (id=header_form) with some input fields inside the "subview" element.
4) When running the web application, the form and its children (id=header_form) inside the subview are not rendered.
It seems to be a problem with multiple forms on a page and the subview.
Do I use these JSF components incorrectly? Any advice?
Thanks

The forms are not nested.
hello.jsp
<webuijsf:body ...>

<div style="margin: 0px 0px 10px 0px; left: 0px; top: 0px">
<jsp:directive.include file="Header.jspf"/>
</div>

<webuijsf:form ...>
From above fragment, you can see the header.jspf is outside of the form element.

LOV Problem with multiple values

HI All,
I have a problem with LOV .When ever i click LOV after search button all values are displaying fine.
But when i get so many values i want to select only one vlaue that is not cmng to the main page ....Cursor is in running state always after that time out error is coming in my application .
This problem is coming with with only single value selection in lOV only problem with Multiple values retrival that time only...
(Iam using 11.1.1.3 Jdeveloper.)
Thanx in advance...

duplicate of {thread:id=2286814}

Problem with multiple content areas

Similar Messages

Maybe you are looking for