.flv doesn't display in browers

Problem: progressive FLV doesn't display in browsers
This is what I did: 1) inserted flash video (about 5 MB and
encoded in Flash Video dEncoder CS3) into a DW page. 2)Saved and
checked that it plays correctly in DW preview. 3) uploaded page,.
FLV and required FLVPlayer_Progressive.swf to server. 4) Checked
with server; they allow progressive FLVs. 5) From Adobe.com I
downloaded and replaced FLVPlayer_Progressive.swf in my local
folder in case cross-scripting vulnerability=the culprit.
6)uploaded new FLVPlayer_Progressive.swf to server. Tried it at
root level and in folder analogous to local file. 7)Cleared
browsers' caches, histories. Refreshed page. 8) did all of this on
Mac OS10.4 and Windows XP (except #5 because Adobe site has 404
error on cross-scripting vulnerability link for Macs . Have
notified Adobe about 404 three times.)
URL:
http://www.digitalartsclub.jandove.com/pages/gallery/motion/jdove.html
Very frustrated, would appreciate any suggestions

<sigh>
Your page throws a javascript error when it loads - line 155.
Line 155 is
this -
AC_FL_RunContent(
'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0','widt h','360','height','240','id','FLVPlayer','src','FLVPlayer_Progressive','flashvars','&MM_Co mponentVersion=1&skinName=Clear_Skin_1&streamName=../../../media/motionartists/dove-mnem&a utoPlay=false&autoRewind=false','quality','high','scale','noscale','name','FLVPlayer','sal ign','lt','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Vers ion=ShockwaveFlash','movie','FLVPlayer_Progressive'
); //end AC code
That function is in the script mentioned here -
<script src="../../../Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
</head>
When I browse here -
http://www.digitalartsclub.jandove.com/Scripts/AC_RunActiveContent.js,
I get
file not found. You do the math....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jandove" <[email protected]> wrote in
message
news:[email protected]...
> Problem: progressive FLV doesn't display in browsers
> This is what I did: 1) inserted flash video (about 5 MB
and encoded in
> Flash
> Video dEncoder CS3) into a DW page. 2)Saved and checked
that it plays
> correctly in DW preview. 3) uploaded page,. FLV and
required
> FLVPlayer_Progressive.swf to server. 4) Checked with
server; they allow
> progressive FLVs. 5) From Adobe.com I downloaded and
replaced
> FLVPlayer_Progressive.swf in my local folder in case
cross-scripting
> vulnerability=the culprit. 6)uploaded new
FLVPlayer_Progressive.swf to
> server.
> Tried it at root level and in folder analogous to local
file. 7)Cleared
> browsers' caches, histories. Refreshed page. 8) did all
of this on Mac
> OS10.4
> and Windows XP (except #5 because Adobe site has 404
error on
> cross-scripting
> vulnerability link for Macs . Have notified Adobe about
404 three times.)
>
> URL:
>
http://www.digitalartsclub.jandove.com/pages/gallery/motion/jdove.html
>
> Very frustrated, would appreciate any suggestions
>
>
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=8,0,0,0','width','360','height','240','id','FLVPlayer','src','FLVPlayer_
>
Progressive','flashvars','&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamNam
>
e=../../../media/motionartists/dove-mx&autoPlay=false&autoRewind=true','quality'
>
,'high','scale','noscale','name','FLVPlayer','salign','lt','pluginspage','http:/
>
/www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','
> movie','FLVPlayer_Progressive' ); //end AC code
> </script><noscript><object
> classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=8,0,0,0" width="360" height="240"
id="FLVPlayer">
> <param name="movie"
> value="FLVPlayer_Progressive.swf" />
> <param name="salign" value="lt" />
> <param name="quality" value="high" />
> <param name="scale" value="noscale" />
> <param name="FlashVars"
>
value="&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=../../../media/mo
>
tionartists/dove-mx&autoPlay=false&autoRewind=true" />
> <embed src="FLVPlayer_Progressive.swf"
>
flashvars="&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=../../../medi
>
a/motionartists/dove-mx&autoPlay=false&autoRewind=true"
quality="high"
> scale="noscale" width="360" height="240"
name="FLVPlayer" salign="LT"
> type="application/x-shockwave-flash"
> pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Versio
> n=ShockwaveFlash" />
>

Similar Messages

  • Flv doesn't display in Safari

    Have placed an flv in a page and it displays and plays in all
    browsers except Safari on Mac/PC. Maddening. Is there some js that
    Safari doesn't like or understand? I've searched all over the web
    for a solution. The flv even plays in Live Preview in DW CS4 which
    supposedly uses the Safari rendering engine. All scripts and other
    support files are on the server, all paths are correct. Anyone have
    any ideas? Here's the url:
    http://www.waxthemovie.com/home.html

    Sure does work. What you mean to say is that you cannot make
    it work,
    right?
    Here's a page -
    http://murraytestsite.com/test-flv.php
    I created a new page and saved it. I inserted the FLV, and
    chose the
    options. I uploaded the page WITH dependent files. That's
    it....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "geigreg" <[email protected]> wrote in
    message
    news:g2jhc5$a6j$[email protected]..
    > Ok, so, do yourselves a favor- DO NOT USE Dreamweaver
    CS4 beta to embed
    > flvs!
    > It does not work! At least the code does not work in
    Safari. I removed the
    > flv
    > and script references and re-embedded the flv in CS3 and
    all is well.
    > Adobe-
    > please remedy this. CS4 is a nice upgrade but things
    like this are very
    > frustrating. I hope I can save someone else some grief.
    >

  • Flash content doesn't display in browsers

    I recently updated Dreamweaver to 8.0.2. I updated an .swf
    file, updated the link on my DreamWeaver page and uploaded
    everything. When I saved the DreamWeaver page a window popped up
    that said it was modifying the html to work with the updated
    Internet Explorer. The new .swf file doesn't display on any browers
    (Safari, FireFox, IE)
    Does anyone know what's going on?

    Did you upload the Scripts folder that DW places into your
    local site when
    you do this?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "dlipscombe" <[email protected]> wrote in
    message
    news:ecv25g$i9v$[email protected]..
    >I recently updated Dreamweaver to 8.0.2. I updated an
    .swf file, updated
    >the
    > link on my DreamWeaver page and uploaded everything.
    When I saved the
    > DreamWeaver page a window popped up that said it was
    modifying the html to
    > work
    > with the updated Internet Explorer. The new .swf file
    doesn't display on
    > any
    > browers (Safari, FireFox, IE)
    > Does anyone know what's going on?
    >

  • SWF Doesn't Display

    I'm redesigning a site with a SWF movie on the home page but the SWF doesn't display on the redesigned page. Original page displays fine. Same results on IE 7 & 8 and FF - that seems to rule out computer & browser errors. The only difference I see is new page is XHTML while the original is HTML - The code on the two pages is virtually identical except for that.
    Redesigned site is http://www.bath-hancock.com/index.html
    Original site is http://www.countryconnectionsva.com/index.htm, on a different host.
    Live HTTP Headers shows everthing is being downloaded properly except  http://www.bath-hancock.com/flash/CountryConnections.f4v and  http://www.bath-hancock.com/SkinUnderAallNoFullNoCaption.swf get 404 errors - these files don't appear on the original site and I don't know what they are as I can't find any reference to them in the code for the new site.
    Any suggestions would be greatly appreciated.
    Thanks!

    Thanks Murray,
    Yes, I tried that but didn't know what to exect as I have never done that with a SWF before. I downloaded the
    entire old site with DW, copied the files to the new directory, and then uploaded them with DW. I guess I'll repeat the process and see what happens.
    Hmmm - I can play the one I initially downloaded in Flash but I get the following error when I try to play the copy:
    Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2035: URL Not Found. URL: file:///Macintosh%20HD/Users/laurenceheine/Sites/Country%20Connections/SkinUnderAllNoFull NoCaption.swf"]
    Checking what was downloaded, I found three more files: SkinUnderAllNoFullNoCaption.swf, CountryConnections.f4v, and CountryConnections.flv. Copied those to the /flash directory and now the SWF plays on my computer in Flash. Uploaded them to the server and it plays w/o the skin (still get that 404 error). Moved the skin to root and it plays fine. Wonder why it plays ok in /flash on my computer but not on the server?
    Only issue left is the white background - can I change that somewhere? (I don't do Flash so have no clue.)
    Thanks again!
    Larry

  • Bridge doesn't display and generate RAW previews right

    Hi everybody,
    1. problem:
    Bridge doesn't load the prewiews of RAWs, just if I click on the picture. Before, it loaded the miniature pictures within a few seconds. We didn't change any settings.
    2. problem:
    Bridge doesn't display DNG formates right (see picture). CR2 (Canon) is shown right.
    Informations:
    - Win 7 Professional 64bit, Photoshop/Bridge CS6
    - Photoshop/Bridge doesn't need updates
    Help badly needed...!

    Since FLV are similar to other video files I suggest you read thread #7 of the following post and see if any of the suggestions help.  Perhaps the G spot program would tell you what codec you need and if it is installed on Bridge.  Beyond that I know nothing.
    http://forums.adobe.com/thread/557614?tstart=0

  • Problem with video skin doesn't display on html although the video played normally.

    I used "Adobe media encoder" to convert a video file to "FLV" format, so that I can import to "Adobe Flash CS5" . I have chosen all the component buttons and tried to "publish preview" on to html but the video skin doesn't display although the video does. Two swf file skin file + fla + swf movie + html are all in the same folder.
    Please help....I have tried to fix this problem for 10 hours already and still have no luck, tried to search online for solution but counldn't find anything.
    Message was edited by: adobe_user_2

    I already gave you the answer to your problem and now here is
    the proof:
    http://www.johnkalnin.com/test/dancin/dancin.swf
    Notice the skin?
    http://www.johnkalnin.com/test/dancin.html
    Notice the lack of a skin?
    This is because the skin is in the wrong directroy. If I put
    the skin in the same folder as the HTML file, not the swf, it
    works. So if you would do what I said a few posts ago and make this
    work:
    http://www.mikelrouse.com/SteelExternalAll.swf
    Then your problem would be solved. The problem is that the
    skin path must be defined by the html file calling the swf file,
    not the location of the swf file.
    PS - My daughter is too cute!

  • How to I get an FLV Skin to display on external sites?

    This is thee most frustrating thing! I've been trying to get
    my FLV skin to display on other sites when embedded, but the video
    is the only thing that shows up. There are no play back controls;
    nothing! I can view things just fine on my site (so that is NOT the
    problem) – it's just not displaying on other sites.
    I am using an FLV component and I do have all the necessary
    files loaded in the same folder. It's just when I try embedding the
    SWF file on an external site, the only thing that shows up is the
    video w/ no controls or skin.
    Is there embedding code to include the second SWF file?
    OR
    Is there a better way in creating a SWF file that includes
    the FLV component? ActionScripting or something that needs to be
    added???
    If so, please explain! I got ALL DAY AND NIGHT! This is
    driving me up the wall. There is NOTHING on the web that talks
    about this.
    Thanks!!!!!

    I found a link which informs that not all servers allow the MIME type for "f4v" files. . .
    http://forums.devshed.com/flash-help-38/how-do-i-make-f4v-files-play-in-a-web-610155.html
    Also, when I tried inserting a FLV object using Media>FLV the menu option only allowed me to insert FLV files, not F4V files.  So that comes back to the issue of what type of container you would be using since the Dreamweaver FLV container does not support F4V.

  • XMP doesn't display proper info in Photoshop CS2 for Mac.

    Dear List members:
    I have just recently installed Creative Suite CS2 and begun to explore the functionality of XMP. After purchasing Bruce Fraser's book on Camera Raw for CS2, I downloaded Metalab (Pound Hill Software) and created my first custom XMP panel that can be seen under the file info in Photoshop when an image (digital photo) is open.
    The problem is that I noticed a few odd things and began to question myself if there is some kind of bug or a problem with my installation of CS2.
    1. The window that opens under the file info command has several categories of information on the left to be chosen from, in the following order:
    (1)Description, (2)Camera Data 1, (3)Camera Data 2, (4)Categories, (5)History, (6)IPTC Contact, (7)IPTC Content, (8)IPTC Image, (9)IPTC Status, (10)Adobe Stock Photos, (11)Origin, (12)Advanced
    The Camera Data 1 option when selected opens a panel in the file info window that seems to contain all the information it is supposed to contain. The Camera Data 2 panel, on the other hand, doesn't display any information at all. Although the fields are there, they are empty. The fields are:
    (1)Pixel Dimension X and Y, (2)Orientation, (3)Resolution X and Y, (4)Resolution Unit, (5)Compressed Bits per Pixel, (6)Color Space, (7)Light Source, (8)File Source.
    All these fields are empty but when looking at the same file under Bridge the information is there, displayed under the metadata menu.
    This is something I noticed "before" installing Metalab so I know it is not a compatibility issue generated by the installation of the software.
    After installing CS2 I noticed that CS1 remained installed in my system. The version I purchased of CS2 is the upgrade one. Since I have no use for CS1 as I am now totally converted to CS2, I would like to uninstall CS1. The following are some of the questions I have:
    1. How can I uninstall CS1 without causing any problems to my installation of CS1 ? Is there an uninstall utility with the software or will I have to uninstall the entire package manually ?
    2. My G5 came with only one internal 160 GB drive where I originally installed CS1. I then purchased another internal 400 GB HD and copied the original drive onto it. This week I am going to replace the original 160 GB drive with a second 400 GB drive so that I can do regular "mirror image" back-ups between the two drives. Shold I expect any problems as I remove the drive where I originally installed CS1 ? Since I used disk utility to "copy" the 160 GB drive onto the 400 GB drive, my understanding it that any Adobe software key or authorization was also transferred to the drive. Is this right ? In case it hasn't, how can I transfer this information so that after I remove the 160 GB drive I will not experience any problems when trying to run CS2 ?
    3. How can I fix the problem with the Camera Data 2 panel under the file info window and command ? I noticed that the folder that is supposed to hold the Custom File Info Panels (HD>Library>Application Support>Adobe>XMP>Custom File Info Panels) has files for CS1 and CS2. Could this be a problem ? There many more files with .dat extenson than there are with the .txt extension. Bruce Fraser specifically says that the ones with the .txt extension are the ones that hold the XMP templates for information related to the image files. The files I have in this folder with the .txt are:
    (1)Camera1_CS2.txt , (2)Camera1.txt , (3)Camera2_CS2.txt , (4)Camera2.txt , (5)Categories.txt , (6)History.txt , (7)IPTC_Contact.txt , (8)IPTC_Content.txt , (9)IPTC_Image.txt , (10)IPTC_Status.txt , (11)StockPhotoInfo.txt
    The only ones that have two separate files one each for CS1 ad CS2 are Camera 1 and Camera 2. Camera 2 seems to be the only that is now non-functional. What should I expect to happen if I were to manually uninstall the ones that relate to CS1 ? Could that cause any problems ?
    My apologies for the long post but I didn't really know how to make it shorter.

    The Photoshop and/or Bridge forums would be more likely places to get answers to your questions. This forum is inhabited more by programmer types interested in implementing the XMP specification in applications we write.
    I'd expect CS2 to ignore CS1 panels so I doubt that's the issue. Panels don't interfere with each other--they just offer different views of the data. In any case, move the extra panels to your desktop and see what happens.
    As far as I know, all you need to do on the Mac is drag the CS1 application folder to the trash to uninstall it.

  • Mac Mini Doesn't Display through Philips Tube HDTV

    I have a Philips tube HDTV with a VGA connector in the back, and used the DVI-VGA connector that came with my new Mac Mini to connect. I don't have a computer monitor at home. The TV doesn't display anything.
    So then I took the Mac Mini over to a friend's. He has a VGA monitor, and so he ran the Mac Mini through setup and set it to the lowest possible display settings. I came back here, rebooted and plugged it back in; still no display.
    Then I tried this:
    "First thing to try is to boot the mini into safe mode by holding down the shift key as it boots up. This should allow it to boot, and then give you access to the display preference pane to adjust the settings back to those that worked.
    If that doesn't work, try disconnecting the TV, and rebooting the Mac with no display attached. Once it has fully booted and enough time has passed to allow the desktop to be displayed, reconnected the TV. This should force the mini to boot into a low-res mode that works with just about anything, then when you reconnect the display, either cause it to auto-sense the correct resolutions, or give you access to display preferences."
    This didn't work either. Any suggestions?

    Hi Alan,
    Check your TV manual to see what resolutions your VGA/RGB connector on your TV will accept. Being a HDTV it is likely to be from 480p to at least 1080i.
    You then set the resolution in your Display preference pane to 640x480 and you should get a picture on your TV. The trick is to set it when you can't see anything! Attaching to another device may not help because the Mac detects that device when you set the Display and will know its not that when attached again to your TV. When attached to your TV it is setting another resolution it thinks will work. It is clearly guessing the wrong screen resolution when you do connect it.
    I overcame this situation myself using a VNC client. That requires you to have another computer you can use to control your Mac Mini via VNC. You can then access the Display pane via VNC and set the 640x480 resolution which will work.
    For setting 1080i (and the VNC process) please see:
    http://www.macosxhints.com/article.php?story=20060319073027371&query=1080i%2BMac %2BMini
    I am guessing you can also use an S Video adapter - available from Apple - to connect to an S Video port your TV may also have. That won't help with the VGA connection though.
    Hope this helps.

  • Secondary Cost Element Values doesn't display in Profit Center Report

    Hi everyone,
    I'm having a problem with our Profit Center plan/actual/variance reports wherein it doesn't display the postings I made to the Secondary cost element when I executed an assessment cycle (KSU5). I already set in the configuration that all postings to be done in the cost centers, should have a parallel posting to the profit center assigned to it. I can see the postings in my cost center reports, but not in my profit center report. Could I have missed out on any procedure to enable the secondary cost element parallel posting in my profit centers? Any help would be appreciated. Thanks!

    it might be the configuration of the library or some parameter in the report (record type should be 0 and 2 for actual values, where 2 stands for distributed values and 1 and 3 for planned values)
    but it also might be that the reconciliation is done between different CC and same PC
    - check your CC organisation asignment
    - if sender cost center and receiver cost center have tha same PC it is probably the reason
    - I had that problem my self and didn't solve it
    cheers
    matej

  • WEB.SHOW_DOCUMENT sometimes doesn't display the generated PDF file

    Hi all,
    I'm using the following code to generated my report from Forms:<br><br>
    V_REPORT_ID := FIND_REPORT_OBJECT(V_REPORT_NAME);
    V_REPORT_SERVER_JOB:= RUN_REPORT_OBJECT(V_REPORT_ID,P_LIST);
        V_JOB_ID := substr(V_REPORT_SERVER_JOB,length(:GLOBAL.REPORTS_SERVER)+2,length(V_REPORT_SERVER_JOB));
        V_REPORT_STATUS := REPORT_OBJECT_STATUS(V_REPORT_SERVER_JOB);
    LOOP
       IF V_REPORT_STATUS = 'FINISHED' THEN          
          V_TMP_PDF := :GLOBAL.APACHE_HTML_FOLDER ||'rpt'|| V_JOB_ID  ||'.pdf' ;
         COPY_REPORT_OBJECT_OUTPUT(V_REPORT_SERVER_JOB, V_TMP_PDF );
        WEB.SHOW_DOCUMENT(:GLOBAL.AS_HOME_URL ||  'rpt'|| V_JOB_ID  ||'.pdf' ,'_BLANK');     
        END IF;
    END LOOP; <br><br>
    Everything works fine except the WEB.SHOW_DOCUMENT part. In some clients, this command does what it required from it and opens a new browser window with the PDF report displayed on it. In some other clients, this command does nothing: now window dispalyed. When I refer to the Application Server, I see the PDF report successfully generated there. When I put the URL of the generated report manually in the browser address, I can see the report.
    <br><br>
    <b>Why the WEB.SHOW_DOCUMENT doesn't display the generated PDF report in some clients?</b>

    I agree with the previous 2 posters.
    Also firefox and ie handle it differently. Make sure you test on what your clients use.
    Sometimes acrotray.exe is completely retarded and doesn't work.

  • MSI 970a-g46 motherboard starts up but doesn't display anything.

    Hello, I'm having problems with a new motherboard I got from Amazon, specifically the 970a-g46. The following are my specs in use with this motherboard:
    CPU: AMD Phenom 2 x4 965
    GPU: nVidia GeForce 560 GTX
    Ram: 8gb Kingston HyperX Fury 1866mhz.
    PSU: Corsair 650TX (650 Watts)
    Compatability-wise, everything checks out so I wasn't expecting problems at first. All the other parts excluding the ram I've used before. Here's exactly what happens:
    I power up the computer after everything is installed and connected. The 4 phase LEDs turn on which tell me the CPU is powered up and working (so I assume). I don't get any beeps or buzzs mainly because I don't see any speaker/buzzer on this board. The monitor blinks and while it is connected to my GPU, it doesn't display anything, it's just a black screen. I can leave it on for a few minutes and I'll still not see anything happen. An important observation here is that my keyboard which has LEDs will turn on after a short period of time in boot-up (with my older set-up that is). This does not happen ever regardless of how long I leave my computer on on this new mobo.
    I've gone over and checked/tested numerous things:
    * The PCI-E and ATX cables for the GPU, motherboard and CPU are all connected and secured (I've tried both 4-pin and 8-pin connections for the CPU, neither help).
    * I've tried jumping the CMOS multiple times to no avail.
    * I tested the ram on another computer and it worked just fine on that one.
    * I've tested the motherboard without a GPU and it still does nothing (though I think that's because this motherboard doesnt have its own integrated GPU for some reason).
    So far the only possible reasons why my computer is not working is because of my PSU (very unlikely as it's only a year old and it's a Corsair, which I've heard is very reliable in the long-run), GPU (It is quite a few years old but even without the GPU my computer still doesn't go past boot-up), CPU (possible due to its age and how many freaking time I've reseated it (probably around 8 times) so I wouldn't doubt it, but before I put it into this motherboard I did check its pins and they were all there and placed nice and smoothly into the socket.) and finally the motherboard (it's possible that this is just a defected motherboard and giving me a super hard time which would be a first in all the years I"ve spent computer building).
    The best case scenario of course is me giving some kind of oversight to how I transferred over the parts and connectors. I might've missed something obvious to please any advice/insight on how I can solve this problem would be greatly appreciated
    EDIT: Some other things I did but forgot to mention:
    * Checked ground nut things and ensured they matched the specifications of the motherboard ATX; only 6 are under the board and each one is aligned up with the holes on the board as designed.
    * Tried booting up without powering the CPU. Only one phase LED light came on, still the same problem (for an obvious reason this time now).
    * Re-seated GPU multiple times, re-connected cables multiple times.
    What I have NOT done is re-seat the CPU because I am almost out of acetone so I would need to get another supply of that which won't be until tomorrow. I also have not re-seated everything back on my older motherboard to check if it still works. Tomorrow I'll most likely do that and if I find that the old motherboard works flawlessly then that tells me that the new motherboard I got is either defected or there's some compatability issue I"m missed out on.
    EDIT 2: Just found a speaker and plugged it into the motherboard. Booted it up and I got no beeps whatsoever. So this mobo is giving me no video activity (there is a signal it's just blank), and no beeps from the motherboard. I have no idea what that could mean at this point.
    EDIT 3: I decided to test a few things with the new speaker I just got. First I removed ram and tried running, I got 3 beeps which I assume is the beep sequence of faulty/no ram. Removed the power to CPU and the GPU itself individually, gave no beeps this time.

    Quote from: rhradacut on 06-January-15, 16:49:14
    What's the serial number of your MB? Needed to determine what BIOS may be on the MB. Exactly which version of the CPU is it? There were several different 965 CPUs and they required different BIOS versions, 1.2, 1.9,2.2 depending on which CPU you actually have.
     Also another problem may be that native memory supported by your CPU is DDR3-1333, not 1866
     None of the supported CPUs have integrated graphics, any MB graphics would be in the chipset, not CPU. Examples would be 785G, 880G
    Thank you very much rhradacut! The problem was that the mobo for whatever reason was forcing 1866mhz on my CPU when it only supported up to 1600mhz. I had to install a spare ddr3 module to downclock it so that I could access the BIOS and manually set the DRAM timing to 1600mhz for it to work. That's a very strange problem that I figured would've been auto-resolved by the hardware, and would also be a big problem if I didn't have any spare DDR3 ram to work with.
    Once again thanks for helping out on solving my problem.

  • My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please ad

    My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise

    Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
    tt2

  • IPod Touch doesn't display playlists in ascending ASCII order, why /  It shows up in correct ASCII order in iTunes Devices listing?

    My iPod Touch doesn't display playlists in ascending ASCII order, why /  It shows up in correct ASCII order in iTunes Devices listing?

    Any suggestions? Anyone?
    MacBook Pro 15" 1.83GHz   Mac OS X (10.4.6)   3G 20gb iPod

  • Mapping canvas of the mapping editor doesn't display

    I don't want to reinstall the OWB, I've tried on everything on the Design Center GUI, the mapping canvas has just being hiding somewhere seeing me tearing my hair. I will almost die. But all the pluggable mappings show their mapping canvas as they did.
    I can't remember what I've done in the other day and so lose the mapping canvas, every mapping in the same module just doesn't display its canvas, all other windows (palette, explorer...) show normally.
    I've tried creating a new project and creating a mapping in it. The mapping canvas still doesn't come to the display.
    Is there any configuration file to set control over the mapping canvas as well as all other GUI elements?
    Any direction, Thanks a million.
    Oracle 10.2.0.1.0
    OWB 10.2.0.1.0
    Work Flow 2.6.4

    I solved it.
    It's in <owb_dir>\owb\bin\admin\MappingEditorLayout.xml.
    I replaced
    <SPLITTER orientation="0">
    </SPLITTER>
    with
    <DOCKABLE tag="ROOT" width="714" height="660" min_width="50" min_height="16" pref_width="714" pref_height="660" collapsed="false"/>.
    Of course, then relogin to the design center.
    It works for me.

Maybe you are looking for