Flv doesn't work in DW CS4

I've been trying to get a flv video to work with a dreamweaver skin, but I only get this graphic displaying all the buttons.
I've attached a jpeg of the graphic and the code. Does anyone know of a fix for this? Thanks!

I would think this is a swf (.fla) issue instead of DWCS4. What do you mean by using a DW sk
in? Are you trying to avoid using the default player controls in Flash or wanting to change them
? (that sounds the same but the approach isn't depending on your desires)

Similar Messages

  • #include Doesn't work in AE CS4

    Anyone have a work around for the "#include" javascript in CS4. Used an external file to drive some text in my comp in CS3, but the same script doesn't work in CS4. I even downloaded a comp from the
    Graymachine.com
    website to check and it didn't work either.
    I'm on a MAC, by the way.

    The problem is that whatever is in the file has to be valid JavaScript syntax. I think it would be tricky to get that to work with a bunch of spreadsheet data.
    Dan

  • H264 encoded flv doesn't work

    I put the h264 packets into flv file with the flv file format in video_file_format_spec_v10.pdf. I used CodecID=7(AVC) and filled video data with h264 encoded packet. But it doesn't work. The codec lib is x264 with CABAC enctropy.
    The test.flv file in attachment is what I created using x264. Below is the media infomation about test.flv.
    Could someone help me? Thanks very much.

    First of all you can't use h264 in an flv, Flash Video files encoded with the H264 codec must have the ending (mov, mp4 or F4V)
    Those need to be preparated as Adobe recommends, best choice is to use the Adobe Media Encoder or an Adobe editing tool that outputs a proper h264 file.

  • Preload and flv doesn't work on Firefox

    Hello,
    We've created this interactive for a Cd-rom. Now we are
    trying to implement it to internet and are facing some problems.
    We were testing it in Internet Explorer and all works well.
    But the client in testing it in Firefox 2.0.0.3 and in fact
    the preloads are skipped and the videos don't load.
    The videos are loaded into an FLVPlayback from a external
    folder. I'm using Flash 8.
    You may take a look at it in here:
    http://www.laserretadecallus.com/index_new.html
    Or, if the client decides to put it active on-line, here:
    http://www.laserretadecallus.com
    Help!!
    Thanks.
    Valdemar

    let me try to explain a little better the structure.
    The first "intro" video loads fine, but once you go inside,
    choosing "Catalán" or "Castellano" there are more videos
    located on the right side of the screen.
    The "intro" video is located in a folder, let's say
    rootServer/flv/videoIntro.flv, and is loaded using the *.swf that
    is located in the main rootServer/parcsud.swf.
    But the other videos are loaded using other *.swf's that are
    located in a folder rootServer/swf/moviex.swf and are calling the
    videos from this same folder;: rootServer/flv/videox.flv
    If we put the videos directly into the root of the server
    (rootServer/videox.flv ; rootServer/videoy.flv ; etc...) they all
    load. If we keep them into this flv folder they don't load.
    Is it normal that mozilla doesn't accept this kind of paths?
    I hope I'm explaining it well.

  • FLV Doesn't work!!!!!!!

    Hi everyone!!!
    My site goes through the follow structure:
    (startpage) that loads the (mainpage) in a new container MC
    (alvo) but
    in the same level (0).
    From within the (alvo).(mainpage), I call another container
    MC
    (movies), now in level (2).
    This new MC has a FLV component that should load videos
    dynamically,
    acording to a variable value generated from the buttons in
    the
    (alvo).(mainpage).
    The problem:
    In my computer everything works fine and I have some friends
    that told
    me the same.
    But in some cases, the people goes to the site and all the
    flash content
    works fine, but the video doesn't appears.
    The site:
    http://www.edd.com.br/new
    Is hosted in linux APACHE.
    The code:
    switch (_global.my_video) {
    case "demo" :
    my_FLVPlybk.contentPath = "
    http://www.edd.com.br/media/demo.flv";
    break;
    case "..." :
    break;
    import mx.video.*;
    this.attachMovie("FLVPlayback", "my_FLVPlybk", 10);
    my_FLVPlybk.bufferTime = 8;
    my_FLVPlybk.autoSize = true;
    my_FLVPlybk.setSize(400, 270);
    my_FLVPlybk.x=2, my_FLVPlybk.y=2;
    my_FLVPlybk.autoRewind = true;
    my_FLVPlybk.skin = "
    http://www.edd.com.br/media/ClearOverPlaySeekMute.swf";
    The questions:
    Why the video doen't work??
    Someone have any idea about whats is happening??
    Is that code right??

    MotionMaker escreveu:
    > Be sure they have Flash player 8 installed. They need to
    right mouse click over the the Flash movie to find out.
    Thanks!
    I've solved the problem!!!

  • My graphics tablet doesn't work in Flash CS4?

    In Flash the cursor won't move if I use my tablet, but it moves if I use the mouse.. the tablet works outside of flash, like in paint.
    I use Windows 7 if thats the problem.
    EDIT: Yes, I do have the latest drivers for Windows 7.

    OK, so if any one has the same problem.. I fixed it by deleting an old driver I had and then installed the newest driver for Windows 7...

  • Crop tool doesn't work in PS CS4

    The crop tool alway sizes down the image to 1 square pixel.
    Hardware: G5, OS: Tiger with lates patches.
    Is there anyone out ther who experienced the same problem? Any suggestions what to do?

    Reset the tool per the faq.
    http://forums.adobe.com/thread/370739?tstart=0

  • Media Encoder CS4 doesn't work with Premiere (pic related)

    Oh hai!
    I just got Adobe Master Collection CS4 and my Media Encoder doesn't work with Premiere CS4. When I try to export the file, Encoder starts normally. Then I click "Start queue" and Encoder starts loading. Loading takes almost five minutes, which is a long time, because my project is very simple. After that nothing happens, just a warning sign appears. When I click it open, some kind of log file open and it says:
    Encoding failed
    Could not read from the source. Please check if it has moved or been deleted.
    And I didn't deleted anything. So what does that mean? Why that "Source Name's" path is different than my project files path? Can this problem relate that somehow?
    I have also another problem with Premiere CS4, maybe there's a link between these two problems. I can't get Premiere projects linked to open in Premiere CS4. When I right-click the project icon, and click “Open with…”, I can't find Premiere from the list. When I click "Browse", I can find Premiere.exe from my computer, but if i doubel-clicked it, nothing happens. It won't appear to the list or anywhere else. Or have I missed something? So now the project files are linked to open in After Effects. Of course I can open projects from Premiere, but how do I get them open straight from file?
    I have long experience using Adobe Premiere and this is the first time I got this kind of problems. I have also downloaded new updates for Premiere and Encoder, this didn't help. Does that matter, that I didn't installed Premiere in C-drive? However it's in my computers internal drive, I have divided my hard drive for five parts, one part contains all of my softwares. My scratch disks are in different hard drive (external), does that matter? I tried different location, but that didn't help.
    Please help, I can't do any video editing, because of this problem. And sorry for my english, ask if you didn't understand something. =)

    Hello, this is terrible problem, which i found in CS 6 softwares ...
    solution i found only working, is uninstall and reinstall full package.. but it is not all,
    you need to do BRAND NEW admin account in windows, and install it there.
    that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
    1.by reinstalling of software, client WASTE HIS TIME
    2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
    I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual  "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..  
       I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
    History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
    1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) . 
    I continued my work on my normal working windows profile . (profile A)
    Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
    2. suddenly it stop working (without knowing any possible reason - i did not do installations )
    and showed in error export log file :
    "Could not read from the source. Please check if it has moved or been deleted."
    3.repair via procedure(procedure "a"):
    i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
    I did these steps :
    a-uninstall master coll suite
    b-i used Adobe cleaner tool (remove ALL)
    c-removed raw directories in locations
    •C:\Program Files\Adobe
    •C:\Program Files(x86)\Adobe
    •C:\Program Files\Common Files\Adobe
    •C:\Program Files(x86)\Common Files\Adobe
    •C:\ProgramData\Adobe
    d-removed these links from registry file
    •HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
    •HKEY_CURRENT_USER\Software\Adobe
    •HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
    •HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
    e-restarted the PC
    f- newly installed the Master Coll CS6
    g-update the software
    result of repair of "3" : problem still exists
    4.Ok i find out after coordination with support, it should have been created  ANOTHER NEW admin account.
    4a:so i did the same procedure (uninstalling) in profile B
    4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
    4c: restarted the pc (and did not updated it yet)
    result :
    ==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
    ==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
    ==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
    (in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
    problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
    this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
    what i expect :
    to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
    what i do NOT expect from Adobe:
    to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

  • Web Gallery didn't work on CS4 and still Doesn't Work on CS5??? WTF

    Can somebody please help us with this big issue.
    Web Gallery didn't work on CS4 and we gave up, got Capture one, but now we upgrade it to CS5 and still DOESN'T WORK??? How this people never fixed that issue? can you please get real????
    Thanks
    Pablo

    Pablo,
    As Jocheim points out, this is not the place to get help. My guess is that you need Photoshop Just choose the appropriate sub-forum.
    Also, this ARTICLE might be very useful at gathering the types of info, that will help others help you. Note: much relates to Adobe Premiere, so you can skip over those parts, but you should get the general idea.
    Good luck,
    Hunt

  • Font in CS4 doesn't work in CS6

    I have a TrueType font that a friend made me a few years back. It's my favorite font and I use it frequently; however, I recently upgraded from CS4 to CS6 and the font doesn't work properly in CS6. It does show in the font menus, but now in CS6 it's sorted in a separate font category (along with the Arabic fonts at the bottom), and the sample in the font menu is now merely squares in place of characters. There is a Regular and Bold verison of the font and both have the same issue.
    What changed in CS6, and does anyone know how I can edit the font to make it work with InDesign again? I know I can just pick a new commercial font, but I have such a back log of work that used that font I'd prefer to just fix the font. This is on a Mac, and FontBook validates the font just fine, other apps (including CS4 also work fine with it), I'm not using any font management software (I use FontBook merely for validating the font.)
    Any insight would be greatly appreciated.

    Thanks for the reply Peter.
    I was able to fix 1 of the 2 problems. The font did in fact have some extraneous language entries in it's name table. I was able to edit those out and now the font sorts in the normal font list, and not in the Arabic font category.
    But the font preview feature in the font menu is still showing boxes (instead of characters.) This is where it gets weird... if I go into Preferences and change the Font Preview size from Medium to Small or Large it works correctly. Just not with Medium (the default.) I've tried clearing font caches, etc, but I could at least live with small or large font previews in order to use the font with CS6.
    To answer your question, the font does work correctly when setting type; however, if Font Preview is on the font will eventually be automatically disabled and drop out of the Font menu. Relaunching InDesign CS6 brings it back. Turning off Font Preview prevents this from happening.
    I wonder what is different in CS6. Other apps work fine with this font (including CS4.) Even apps like Pages that also have font preview in their font menus.

  • Flv player doesn't work!!!

    Hi,
    I wanna play flv videos (downloaded from youtube) and it seems i'm not able to do so. I installed 'SWF and FLV player' from apple website and it doesn't work and then I installed perian component for quick time and again it doesn't work
    have you got any idea where the problem is?
    thanks

    flv is Flash...have you tried this one: http://www.wimpyplayer.com/products/wimpystandalone_flvplayer.html

  • Bought a new Mac, migrated data, now CS4 doesn't work. Why?

    I bought a new Mac, had the Apple guys migrate my data and apps to it. Now CS4 doesn't work.
    I researched a bit and found that I SHOULD have deactivated and uninstalled CS4 from my old Mac. I've now done that.
    But do I have to uninstall CS4 files from my new Mac now--and reinstall? Will that work?

    Hi,
    I have a question related to one you answered above: "bought a new Mac, migrated data, now CS4 doesn't work."
    My situation is a little different. I am hoping you can help me with it. I hope I am not violating any protocols by asking you specifically?  A year ago I reinstalled my Mac's operating system. My CS4 is on my computer under "Previous System." I am unable to open it from there and I do not want to attempt migrating it for reasons noted above. I did try to reinstall it as you suggested to hbrady67 by dowloading from CS4 products with my serial number but I got this message: "Upgrade Check  We looked in the default location for qualifying products installed on the machine, but none were found. You may verify upgrade eligibility now by completing the fields to the right. 1) Select a product you already own. 2) Enter a serial number for this product.  CS4 wasn't in the list of selections. The protocol suggested won't work for me since I am not doing an upgrade but trying to reinstall what I already have. Can you direct me on where to go/what to do?  Thank you very much.      Bergi.
    I found the solution to this problem. I was able to download the trial version of what I have and enter the serial number from there. However, it still asked for a serial number from previous software: "your setup is for an upgrade version of Adobe Creative Suite 4." (I entered the serial number that I have for CS2. And it was accepted.  Thank you.  Bergi

  • After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!!

    After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!! What will I do?

    I have similar issues and was referred to a knowledge base article support.apple.com/kb/DL1572  This seems to corrected the issue.

  • CS4 doesn't work after LION installation

    After the Lion installation i had several problems.
    One of these is that the cs4 doesn't work.
    i open illustrator or photoshop and they crash every time. "photoshop not responding" "illustrator not responding" and so on..
    I had to reinstall all the suite that now works.
    The question is... why??
    I thought is is better to format the mac... should i do ?
    thanks

    Another problem is:
    When I start the Dropbox Application, it uses nearly 90% of the CPU as well, so the mac heats up, in a way that it is not possible to use the dropbox application...
    (The Icon of the VLC Media Player  only jumps up and down in the dock, and nothing else happens)

  • Premiere CS4 doesn't work on Windows 7

    I have a delicious new Windows 7 edit suite I built for nearly 3 grand, and Adobe Production Premium CS4.
    Premiere doesn't work properly.
    I urgently need to edit a TV documentary. I don't have time to mess around, that's why I paid for the software rather than pirate it or get something like Vegas or Pinnacle.
    I try and load my Premiere project and the thumbnails for my clips are grey and the program freezes when I try to view them.
    Importing the project into a new project does nothing.
    I just lose response as soon as I try to play some of the clips (about half of them)
    All of the clips are on a local, high speed hard drive.
    I have downloaded all Window's latest updates.. Same with Adobe..
    This software is fairly disgusting. I've been struggling with Adobe Premiere for many years, especially on larger projects that aren't SD DVD-AVI format.

    Hi Guys
    I tried doing the benchmark thing but failed-
    followed the instructions on the webpage, but found afterwards that they didn't match the instructions in the RTF file..
    Couldn't get the script to work- runtime error.
    However, project launched in around 11 seconds, rendered in I think less than a minute, and exported both formats in about 36 seconds.
    Is that useful?
    I am struggling to find any more time to work with this benchmarking utility.. thanks for bringing my attention to it though.
    HDD setup is
    System SSD
    3 x Spinpoint F3 (not in RAID as I'm struggling setting it up without wiping Windows from the SSD...)
    Asus P6TD
    Graphics card is the weakest link here - 8500GT, until I can afford to upgrade.. Think it has latest drivers though.
    X-Fi Xtreme Gamer soundcard (very recently installed)
    I do indeed have a Logitech mouse, it's using SetPoint, latest version with UberOptions.
    It seems like this project is nothing less than corrupted. But nothing is helped by me importing it into a fresh project... my steps:
    1. Load Prem CS4 (latest update)
    2. Load Promo.prproj
    3. When loaded, it takes an additional ~15 seconds of busy disk activity, loading thumbnails in the timeline etc, which it normally never does on this machine. Finally, offline symbols change to thumbnails in the project/bin pane
    4. If I scroll down in the project window, the lower clips have no thumbnails and suddenly everything's fallen apart; the monitor is black, the source monitor is frozen... Sometimes Prem says not responding..

Maybe you are looking for