FM for getting not closed GR

Hi everybody,
I am searching for a FM which suggests all available GR positions to invoice.
Basically it it is exactly the same function which is used in TA miro when posting an invoice and provide the EBELN.
BR,
Dominik

Hi Bala,
You can uses CRM_ORDERADM_H_READ_OW specific function module for order header read data
If Zfields are added by AET, FM should return all fields value . It's really strange issue.
Can you check :
- whether the export interface CRMT_ORDERADM_H_WRK stucture is enhance with new field?
- All custom fields data are updated before status badi call?
Let me know if anything.
Regards,
Arjun Pawar

Similar Messages

Webdynpro for ABAP not closing browser window after click Exit

Hi Experts,
We come across a minor problem when executing a Webdynpro for ABAP on our Production Portal.
We have a "Exit" button which suppose to close the browser window with the webdynpro codes called but it failed to do so.
The execution steps of the Webdynpro app:
     Click "Exit"
     Click "No"
     Results message in the browser:
The code we use to exit and close the Web Dynpro application
* Code to close the application when the WebDynpro is executed
* as an independent application
* Also requires an Outbound Plug (GO_EXIT) in the main Window
data : lr_ref      type ref to ig_main_window.
lr_ref = wd_this->get_main_window_ctr( ).
lr_ref->fire_go_exit_plg( close_window = abap_true ).
What would be the issue causing this, the Webdynpro codes or Portal config?
Our systems are SAP NW 7.31 with:
ECC6 (Basis 731 SP10)
Portal (Basis 1000.7.31.7.0.20130227234100)
Thank you for your help & advise.
Derek Phung

Hi Tashi,
Thank you for your quick response & help.
According to your more info link, the check will return ABAP_TRUE as the webdynpro app is ran on Portal.
Sorry i should have mention that I got it working on our Dev & Test portal but now forgotten how i have done it, we now need it config for our production portal. I have vague memory collection that i config it somewhere on the portal, maybe one of the Application Modules in NWA?
Any advise, help, hints would be very much appreciated.
Thank You & regards,
Derek

Upon opening Outlook 2003 get message "Not closed properly. File is being checked for erros."

When opening Outlook 2003 get an error message stating that is was not closed propertly and that the file is being checked. It can sometimes take up to 5-10
minutes for outlook to open. How can I stop this?

You need to figure out why Outlook is not closing property. The usual culprits are addins that access Outlook data.
Are you closing outlook before shutting down windows? If you let windows shut it down, you can corrupt the pst.
Does it work better in Safe mode? To open Outlook in Safe mode: Close Outlook then hold Ctrl as you click on the Outlook icon. You'll get a message asking if you want to start in Safe mode. Click Ok.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

[svn:fx-trunk] 13257: Fix for @inheritDoc not working on a setter, but works on a getter

Revision: 13257
Revision: 13257
Author:   [email protected]
Date:     2010-01-04 10:49:13 -0800 (Mon, 04 Jan 2010)
Log Message:
Fix for @inheritDoc not working on a setter, but works on a getter
QE notes: None.
Doc notes: None
Bugs: SDK-24727
Reviewed By: Paul
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24727
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java

steabert wrote:
Hi,
I had a similar problem with my Dell Latitude E4310, and apparently also the E6410, E6510.
The solution for me was to add the following line to /etc/modprobe.d/modprobe.conf:
options snd-hda-intel model=dell-s14
I tried that, unfortunately it does not work with this chipset. I do get a different set of channels though but it still cannot record anything. Maybe this chipset is too "new" for alsa. The latest release dates back from the end of January. Support for it is explicitly stated in the changelog to 1.0.24 but perhaps the recording part of it slipped through the cracks. ALSA bug tracking system seems quite closed.

Getting Files off CD-RW that is not Closed

Hi,
I have an issue that is new to me. My dad has a CD of a music concert his chorus performed that was captured from the mixing board to a CD writer of some sort. The result was a CD that has a single session that is marked as Open when I look at the disk in Toast.
He had 2 such CDs but I closed the session and finalized one disk by burning an additional file on it. That closed the disk and I could see the 2 sessions (as different volumes) and get the audio files off the disk. However, the second CD seems to have run out of room for me to try that trick again. I tried to copy an empty file created by the "touch" command (probably about 4k in size since nothing is every empty in size) it tells me there is ~600k to write and only about 300k available. Toast tells me there is 702MB of data on the disk already (and CDs only say they hold 700MB so I'm assuming it's at the limit).
So the big question is whether I can use Terminal or some other means to just grab the files from the disk even though the session is open and the disk is not closed. Has anyone run into this before or a way around it? Since the Finder will not mount the open session I can't see it in the /Volumes folder to copy from it. Disk Utility wants to erase the disk and Toast can see the disk and if I had room I could write more to it.
Any help or ideas anyone has is appreciated.
Thanks,
Sean

Give this one a try....
http://mac.softpedia.com/get/Utilities/Dragon-Burn.shtml
Do just run it and go.....and do a fresh restart, run that app, then feed the CD - all in one shot, right after a reboot and don't run any other burn apps, feed in any other disks, etc.
If it mounts for DragonBurn, immediately create an image, then burn that to a blank DVD or export audio tracks to iTunes...don't try to pack it all back onto a CD.

I keep getting a message that Firefox is open and not responding. That I have to close the Firefox application or restart my computer. A real pain. Why is the firefox application not closing in English

I keep getting a message that Firefox is open and not responding. That I have to close the Firefox application or restart my computer. A real pain. Why is the firefox application not closing.

Sounds like Firefox is "hanging at exit". That problem is frequently caused by an Extension or a Plugin. Read all of the following articles.<br /><br />
NOTE: Establish a habit of exiting/closing Firefox with Firefox button > Exit or File > Exit to allow an orderly shutdown of Firefox and closing of all of the files that Firefox has open.
#Stop the Firefox process:
#*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
#*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
#*Mac users: http://techheavy.com/2011/02/the-mac-task-manager/
#Why Firefox may hang:
#*[http://support.mozilla.org/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
#*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
#*[https://support.mozilla.org/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably an Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

FSCM- Dispute cases were not closed automatically for credit disputed amounts

Dear All,
We are creating the dispute cases for overpayment or un-applied cash payments (that is credit document) through FDM_AUTO_CREATE. But those credit dispute cases were not closed automatically after I cleared the documents through F-26 or F-32.
We are running FDM_PROCESS_BUFFER program through batch job for every hour. And we made correct configuration for automatic dispute case close in SPRO. Also the debit disputes were closed automatically.
Especially we are facing this issue for credit special g/l transaction (partial/residual/charge of difference clearing) documents.
Note : I can see two changes automatically in credit dispute cases these are, 1) Disputed amount get zero 2) Disputed objects (that is credit document) is automatically removed (Attributes => Linked Objects => Disputed Objects) in the credit dispute cases
Can you please help me how to resolve this issue.
Thank you in advance.
Thanks & Regards,
KVP

Dear Experts,
Can I have solution for this issue.
Thanks & Regards,
KVP

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

Please help I just accidentally deleted a very very important note from my "Notes" on my iPhone 4s. How can I get it back? Is there a "Trash" file somewhere for deleted notes? Thank you, Susan

Please help I just accidentally deleted a very very important note from my "Notes" on my iPhone 4s. How can I get it back?
Is there a "Trash" file somewhere for deleted notes?
Thank you,
Susan

Had you never backed up the phone before? When you saw the iTunes logo and cable, the device was in recovery mode. The data was already lost. The only way to recover from that is to restore the device, which will delete all of your data. You will only be able to restore to your last backup, whenever that was. Sorry this happened, but this highlights the importance of doing regular backups. The backup is the only protection you have against a problem like this.

Keep getting this prompt when I close a tab: ASSERT: Giving up waiting for the tab closing animation to finish (bug 608589) Stack Trace: 0:([object XULElement],[object XULElement],0) How do I get rid of it?

ASSERT: Giving up waiting for the tab closing animation to finish (bug 608589)
Stack Trace:
0:([object XULElement],[object XULElement],0)
Happening since I went to the 4.0b9 beta. Thanks for any help in getting rid of it.

They're still working on fixing that Bug - https://bugzilla.mozilla.org/show_bug.cgi?id=608589 - a fix for another Bug - https://bugzilla.mozilla.org/show_bug.cgi?id=613888 - landed earlier this week which might have fixed it. Unless you are willing to install a nightly Trunk which has the latest fixes, you'll have to wait for 4.0b10 for the fix.

I paid for 55gb storage but keep getting not enough storage message when trying to download a purchased movie

I Paid for 55gb of storage but keep getting not enough storage message when downloading a movie

You paid for iCloud storage. It has no bearing on the capacity of the drive inside your iPad.
What is Stored in iCloud and What is Not?
(Note that I am affiliated with this site, and some pages contain ads).

Getting an Error Message: AA 698 ANLB and ANLC for asset not in Sync

Hi all Experts
I know there were previous thread on the similar issue. I read those and tried to follow the procedure mentioned but didn't work. First of all We are working on ECC 6.0 verion. We have couple of assets Which is giving a problem even when we display the asset. The error message AA 698 ANLB and ANLC for asset not in Sync.
We added a new depreciation area which was added to all the assets. the depreciation calculation for the new depreciation area is not updated in table ANLB. The asset were capitalized in 2009. I think the asset transfer was done using AS91. I initially thought it was fiscal year change problem but now as i open fiscal year 2009 and try to calculate the depreciation it keeps giving me the same error AA 698. There were various OSS notes mentioned which are all implementd in our system.
One more thing I see is that on the depreciation area which has issue which is not populated in ANLB table doesnot have ordinary depreciation start date. Which I tried to maintain using AS92 and reran the depreciation caluclation (AFAR) this also didn't work as its giving me the same error. Also this depreciation area doesn't have Operational rediness date, I think this date should populate from the value date of the asset.
Please let me know if you have suggestion
Thanks
Rajan

Hi bernhard,
thanks for your reply. Below are my observation
1) Have ANLB-LGJAN and ANLC-GJAHR the same depreciaiton areas:
          I had checked this earlier....ANLC doesnot have an entry for that specific deprectiation area. ANLB has an entry. This is where all the issue started.
2) Is the field T082AVIEWB-AUTHORITY on 2 (note 900767).
         This note has been applied and the view is on 2
3)Are the following fields synchrone: ANLC-GJAHR = T093C-LGJAHR
              These field are not synchrone: ANLC doesn't have an entry for depreciation area 82 other depreciation area are at 2009 in ANLC and in T093C-LGJAHR is in 2010. How can we sysnc these tables? Also how can I get depreciation area into ANLC table?
Thanks
RDK007

Getting error like "The following tags were not closed ..."

Hi,
I am getting an error like "The following tags were not closed <Main Report Name>. Error processing resource 'http://abc.cdf.bnm/OA_CGI/FNDWRR.e..."
Issue is , TAG is breaking with main report name.
Any suggestions would be appreciated.
Edited by: user12086550 on May 10, 2010 5:33 AM

I'm having the same problem, but how did you resolved it??
my sub query is running good in toad. this is my xml
<?xml version="1.0" encoding="UTF-8"?>
<dataTemplate name="Asset_Loc_Change" description="Change_in_Asset_Location_and_Account" version="1.0">
     <properties>
          <property name="xml_tag_class" value="upper"/>
          <property name="include_parameters" value="true"/>
     </properties>
     <parameters>
          <parameter name="P_START_DATE" dataType="varchar2"></parameter>
          <parameter name="P_END_DATE" dataType="varchar2"></parameter>
          <parameter name="P_BOOK_NAME" dataType="varchar2"></parameter>
     </parameters>
     <lexicals>
     </lexicals>
     <dataQuery>
          <sqlStatement name="LOC_DETAIL">
               <![CDATA[
select
ASSET_NUMBER,DESCRIPTION,ASSET_CATEGORY,trunc(MAX(DATE_CHANGED)) DATE_CHANGED,
MAX(OLD_ACCOUNT) OLD_ACCOUNT,Max(NEW_ACCOUNT) NEW_ACCOUNT,Max(OLD_LOCATION) OLD_LOCATION,Max(NEW_LOCATION) NEW_LOCATION
from(
select distinct
fad.asset_number,
fad.ATTRIBUTE_CATEGORY_CODE ASSET_CATEGORY,
fad.description DESCRIPTION,
max(fdh.DATE_EFFECTIVE) DATE_CHANGED,
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), NULL, gcc.segment1||'.'||gcc.segment2||'.'||gcc.segment3||'.'||gcc.segment4||'.'||gcc.segment5||'.'||gcc.segment6||'.'||gcc.segment7||'.'||gcc.segment8) OLD_ACCOUNT,
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), gcc.segment1||'.'||gcc.segment2||'.'||gcc.segment3||'.'||gcc.segment4||'.'||gcc.segment5||'.'||gcc.segment6||'.'||gcc.segment7||'.'||gcc.segment8, NULL) NEW_ACCOUNT,
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), NULL, fal.segment4||'-'||fal.segment3||'-'||fal.segment2||','||fal.segment1) OLD_LOCATION,
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), fal.segment4||'-'||fal.segment3||'-'||fal.segment2||','||fal.segment1, NULL) NEW_LOCATION
from
fa_distribution_history fdh,
fa_locations fal,
FA_CATEGORIES CAT,
fa_additions fad,
gl_code_combinations gcc,
fa_books fb
where
1=1
and fdh.DATE_EFFECTIVE between to_char(trunc(:P_START_DATE)) and to_char(trunc(:P_END_DATE))
and fal.location_id = fdh.location_id
and fad.asset_id = fdh.asset_id
and fdh.code_combination_id = gcc.code_combination_id
and fb.book_type_code = fdh.book_type_code
and fb.book_type_code = to_char(:P_BOOK_NAME)
and fb.asset_id = fdh.asset_id
Group by
fad.asset_number,
fad.ATTRIBUTE_CATEGORY_CODE,
fad.description
,NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), NULL, gcc.segment1||'.'||gcc.segment2||'.'||gcc.segment3||'.'||gcc.segment4||'.'||gcc.segment5||'.'||gcc.segment6||'.'||gcc.segment7||'.'||gcc.segment8),
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), gcc.segment1||'.'||gcc.segment2||'.'||gcc.segment3||'.'||gcc.segment4||'.'||gcc.segment5||'.'||gcc.segment6||'.'||gcc.segment7||'.'||gcc.segment8, NULL),
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), NULL, fal.segment4||'-'||fal.segment3||'-'||fal.segment2||','||fal.segment1),
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), fal.segment4||'-'||fal.segment3||'-'||fal.segment2||','||fal.segment1, NULL)
GROUP BY
ASSET_NUMBER,ASSET_CATEGORY,DESCRIPTION;
]]>
          </sqlStatement>
     </dataQuery>
     <dataStructure>
          <group name="G_ASSET_LOC" source="LOC_DETAIL">
               <element name="ASSET_NUMBER" value="ASSET_NUMBER"/>
               <element name="DESCRIPTION" value="DESCRIPTION"/>
               <element name="ASSET_CATEGORY" value="ASSET_CATEGORY"/>
               <element name="DATE_CHANGED" value="DATE_CHANGED"/>
               <element name="OLD_ACCOUNT" value="OLD_ACCOUNT"/>
               <element name="NEW_ACCOUNT" value="NEW_ACCOUNT"/>
               <element name="OLD_LOCATION" value="OLD_LOCATION"/>
               <element name="NEW_LOCATION" value="NEW_LOCATION"/>
          </group>
     </dataStructure>
</dataTemplate>

[svn] 3921: Fix for - @inheritDoc tag not working for get/ set overrides when you only override the setter of a base class

Revision: 3921
Author: [email protected]
Date: 2008-10-28 06:23:00 -0700 (Tue, 28 Oct 2008)
Log Message:
Fix for - @inheritDoc tag not working for get/set overrides when you only override the setter of a base class
QE Notes: Baselines for framework test will need to be updated.
Doc Notes: None
Reviewer: Paul
Bugs: SDK-17304
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17304
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ASDocExtension.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java

Revision: 3921
Author: [email protected]
Date: 2008-10-28 06:23:00 -0700 (Tue, 28 Oct 2008)
Log Message:
Fix for - @inheritDoc tag not working for get/set overrides when you only override the setter of a base class
QE Notes: Baselines for framework test will need to be updated.
Doc Notes: None
Reviewer: Paul
Bugs: SDK-17304
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17304
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ASDocExtension.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java

So I need a new iPhone 3G SIM card to activate my iPhone. I hear you can get one free at Apple Retail Stores. Is this true? If not, can someone please tell me how I can get one? I need it for 3G not 3Gs. Please? I'm desperate..

So I need a new iPhone 3G SIM card to activate my iPhone. I hear you can get one free at Apple Retail Stores. Is this true? If not, can someone please tell me how I can get one? I need it for 3G not 3Gs. Please? I'm desperate..

Apple does not provide SIM cards, carriers do.
Go to your carrier and get a SIM card. Whether it is free or not is up to them.

FM for getting not closed GR

Similar Messages

Maybe you are looking for