FM for MatchCode to get Server path-file ?

Hi
I have used a FM (F4_FILENAME) for make a match code
to set for file names, and this FM shows the computer directories and files to select one.
I need some FM like that, but for the Server (not the PC).
Does somebody knows a FM wich allows me to navigate in Server paths and Files and select one file ?
Thanks
Frank

Hi Frank
I dont think any special authorizations are required for executing this FM.
Can you let us know the OS of the other system.
Also check if FM: <b>F4_FILENAME_SERVER</b> can help you on both.
Kind Regards
Eswar

Similar Messages

Newbie - Dreamweaver CC 2014 - Document Scan - Get Save Path/File

Hi,
I've been a programmer for a long time but have done very little web development. Last time I touched dreamweaver has to be 10 years ago. A company I'm working with is developing a web front end for their system. In their existing system, they are able to scan a document by pressing a button in the application. The button push scans the document and open Acrobat Pro. When the user saves the PDF, they are able to get the path where the user saved the file as well as the file name and then they store that information in the DB of previously mentioned system. From the application they are hitting a TWAIN driver to invoke the scanning (if I understood correctly). The scanner I saw this done with is an EPSON GT-S50 and I believe they are programmatically reading the registry to get the last 15 files that were saved and determining the path and file name from there.
Since they are now developing a web front end over the existing business logic, there are some things they have asked me to figure out. The first of which is how to duplicate what I mentioned above in a web front end. That being said, here's what I need to do:
- Add a button labeled "Scan" to a web page with Dreamweaver that will invoke the scan process of the EPSON Scanner.
- Have that scanned document open in Acrobat.
- On save of the document in Acrobat, I need to get the path and file.
- Add a button to view the file labeled "View".
- On select of the "View button", I need to display the PDF on the same web page.
I've done a bunch of reading so far and I haven't quite found what I need. If you can help point me in the right direction or have done something similar or even if you just want to offer moral support (haha) please let me know. I'll respond as quickly as possible to additional questions, I need to move on this...
Thanks,
Rob

Hi Nancy,
Thank you for responding. I guess the environment would be helpful.. (Sorry) . The web front in will be on servers in one of the major clouds (AWS/Rackspace/etc) and the DB's will be on other servers in the cloud while the servers will be at the customer's offices. So yeah, it is complicated. What I'm trying to come up with is way to do it without tying the end customer to have to marry their network to the cloud network or forcing them to use RDP or Citrix etc.. Trying to come up with the most flexible option. One other thing they are shooting for is mobile compatibility. I just started working on this with them, I wasn't involved in the meetings along the way...
Thanks,
Rob

When I click on Mozilla Firefox I get server not found. When I ask for help I get server not found. Without my intention visual bee is in background.

I recently responded to a prompt to upgrade Mozilla Firefox and started seeing visual bee in background and got lookup for browser safeguard.com.com failed. Can't get into Firefox. My version is 3.6.12. Help requested. Thanks Keith

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

Q abt. "Server Side File Tracking for Mobile Home Sync"

I am following the steps "To optimize the file server for mobile accounts" which are listed on page 157 in Mac OS X Server v10.6 - User Management :
In Server Admin, click the disclosure triangle for the server hosting network home folders for mobile accounts.
If Firewall isn’t listed, select the server, click Settings, click Services, select Firewall, and then click Save.
Select Firewall, click Settings, and then click Services.
Choose the address range for your users’ computers from the “Edit Services for” pop-up menu.
Select “Allow only traffic from ‘ipaddress’ to any of these ports,” select the Allow checkbox for Mobile Account Sync (port 2336), and then click Save.
Select the server, click Settings, and then click General.
Select “Server Side File Tracking for Mobile Home Sync” and then click Save.
My questions is:
In step 2, I added "Firewall" to the services. I continued with the following steps, but nowhere does it say to press the button "Start Firewall", so as of right now Firewall is listed, but not activated - it's gray and not green. Should I turn on the Firewall Service? In my setup, a cable modem/router is acting Firewall between WAN and LAN (small private home network).

I can't get Server Side File Tracking to work. Any help would be greatly appreciated!
Here's what I've done:
1. Followed the instructions in "Mac OS X Server v10.6 - User Management" as per the first post in this thread.
2. Tried turning on the Firewall Service - resulting in clients unable to log in to their network accounts.
3. In Server Admin, under Firewall>Settings>Services, with 192.168-net selected in the pop-up menu entitled "Editing services for", I then chose "Allow all traffic" (instead of "Allow only traffic to these ports:") as my router acts as a Firewall in my setup. Now users can log in to their network accounts again, but Server Side File Tracking is still not working. How do I know it is not working?
According to infinite vortex in this other thread, the syncing window is supposed to only show this:
On my clients, you can see it scan through the home directory before the file copying/syncing actually starts.

How can I get the path name and rename it?

I Hope someone who knows more about automator than I can help me out here. What I'm trying to do is get the path file name, while also changing part of it. Here is my example:
I can get the path name with this "Get Path" script I found http://automatorworld.com/archives/get-path/all-comments/
It does half the job so I just need to tweak it but know how. When I get the path this is what I'll get: /Volumes/Public/Creative Services/Campaigns/2010/NCDDiv-32CDV Upgrade/NCDDIV-32Versions.xls
I need to remove the beginning part"/volumes" to "file://///nhmanmkt01"
This is so I can send the path from our sever where we keep our files to my windows friends so they can open it.
Thanks for any help you can provide!

ok, make the following workflow.
1. get selected finder items.
2. run shell script
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
for f in "$@"
do
echo "$f"|sed 's%/Volumes%file://///nhmanmkt01%'
done</pre>
set the script to accept input as arguments
3. copy to clipboard
save it as a finder plugin.

Logical path for getting a Flat file from application server

Hi All,
We have loaded some .csv files to application server, what is the logical path we have to mention in the infopackage scheduler screen? please guide me how to give the path for getting a flat file from application server.
Thanks,
Sairam.

Hi Sairam,
I hope you know which location you have saved in the Application server.
Now if you go to the Infopackage and click on the "External Data" tab, there you will see Radio Buttons for
1) Client Workstation
2) Application Server
Choose the second radio button, then in the Field "Name of the File" you will be able to use the F4 help and browse AL11 transaction through this option. You can then choose the File.
Hope this helps
Regards,
Praveen.

When i do file, save for web, i get an error that says " the operation could not be completed. The system cannot find the path specified." What can fix this?

when i finish a file and try to "save for web", i get an error box saying The operation cannot be completed. The system cannot find the path Specified.
What can i do or where do i look?

ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what.

F4 Help to get the path for a File source directory

There are numerous function modules for browsing a particular file in desktop and getting the file path (including the fine name) , like F4_FILENAME , KD_GET_FILENAME_ON_F4 , WS_FILENAME_GET etc. But can anyone tell me how to fetch only the directory path to the field were the F4 help is given. Actually the filename has to come in some other field in the selection screen. Is there separate funtion modules for these OR will changing parameters in the above function modules work?
Pls Help....
Also are there function modules for providing F4 help for getting the path to a file in application directory?

Try this method CL_GUI_FRONTEND_SERVICES.
It is a Global CLASS which is having different methods for different purposes
see the documentation of it and use the methods of it
see
CL CL_GUI_FRONTEND_SERVICES
Short Text
Frontend Services
Functionality
The class CL_GUI_FRONTEND_SERVICES contains static methods for the following areas:
File functions
Directory functions
Registry
Environment
Write to / read from clipboard
Upload / download files
Execute programs / open documents
Query functions, such as Windows directory, Windows version, and so on
Standard dialogs (open, save, directory selection)
Example
Determine the temp directory on your PC:
DATA: TEMP_DIR TYPE STRING.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GET_TEMP_DIRECTORY
CHANGING
TEMP_DIR = TEMP_DIR
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2.
IF SY-SUBRC 0.
Error handling
ENDIF.
flush to send previous call to frontend
CALL METHOD CL_GUI_CFW=>FLUSH
EXCEPTIONS
CNTL_SYSTEM_ERROR = 1
CNTL_ERROR = 2
OTHERS = 3.
IF SY-SUBRC 0.
Error handling
ENDIF.
WRITE: / 'Temporary directory is:', TEMP_DIR.
Notes
The class CL_GUI_FRONTEND_SERVICES is based on the Control Framework. See the documentation for more information, in particular on CL_GUI_CFW=>FLUSH which must be called after many CL_GUI_FRONTEND_SERVICES methods.
Migration Information
The old file transfer model was based on function modules of the function group GRAP. The old features have been replaced by the class CL_GUI_FRONTEND_SERVICES. The following list contains the old function modules (italic) and the new methods (bold) that replace them:
CLPB_EXPORT
CLIPBOARD_EXPORT
CLPB_IMPORT
CLIPBOARD_IMPORT
DOWNLOAD
GUI_DOWNLOAD, dialog replaced by FILE_SAVE_DIALOG
PROFILE_GET
No replacement, use REGISTRY_* methods instead
PROFILE_SET
No replacement, use REGISTRY_* methods instead
REGISTRY_GET
REGISTRY_GET_VALUE, REGISTRY_GET_DWORD_VALUE
REGISTRY_SET
REGISTRY_SET_VALUE, REGISTRY_SET_DWORD_VALUE
UPLOAD
GUI_UPLOAD, dialog replaced by FILE_OPEN_DIALOG
WS_DDE
Obsolete: This function is no longer supported.
SET_DOWNLOAD_AUTHORITY
Obsolete: This function is no longer supported.
WS_DOWNLOAD
GUI_DOWNLOAD
WS_DOWNLOAD_WAN
Obsolete: This function is no longer supported.
WS_EXCEL
Obsolete: This function is no longer supported.
WS_EXECUTE
EXECUTE
WS_FILENAME_GET
FILE_SAVE_DIALOG, FILE_OPEN_DIALOG
WS_FILE_ATTRIB
FILE_SET_ATTRIBUTES, FILE_GET_ATTRIBUTES
WS_FILE_COPY
FILE_COPY
WS_FILE_DELETE
FILE_DELETE
WS_MSG
Obsolete: This function is no longer supported.
WS_QUERY
CD (current directory)
DIRECTORY_GET_CURRENT
EN (read/write environment)
ENVIRONMENT_GET_VARIABLE
ENVIRONMENT_SET_VARIABLE
FL (determine file length)
FILE_GET_SIZE
FE (check if file exists)
FILE_EXIST
DE (check if directory exists)
DIRECTORY_EXIST
WS (determine Windows system)
GET_PLATFORM
OS (operating system)
GET_PLATFORM
WS_UPLDL_PATH
Obsolete: This function is no longer supported.
WS_UPLOAD
GUI_UPLOAD
WS_VOLUME_GET
Obsolete: This function is no longer supported.
Reward points if useful.

How do i get the path of the file selected for opening in JFileChooser

hi
I need to get the path of the file selected for opening or saving in the JFileChooser dialog box.Is there any method available.if not how do i get that?
Thanks and Regards
Saminathan.

don't know if its the best/only way, but you could use the getSelectedFile() method in JFileChooser which returns a file and then use the getAbsolutePath() file method

Where i will get the .jar files for JDBC connector for MSSQL Server

Hi,
i am trying to configure the JDBC connector for the MSSQL server. For this we need to add the .jar files for MSSQL Server. Can any body tell , where i will will get the jar files to finish this connection.
Database version is MS SQL Server 2000
Portal version is Portal7.0 sp9
Regards
vijay

Hi Vijay,
If you are looking for the exact steps as to how we can configure the JDBC Connector for accessing the MS SQL Server, have a look at this document:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/b00917dc-ead4-2910-3ebb-b0a63e49ef10
Follow the steps till page 12 of this doc.
Bye
Ankur
Do reward points for helpful as well as solved answers!!

FM to select the file path for download into application server

Hello,
I need a FM to select the file path for download into application server. It is a F4 help .
Its functionality should be simmilar to the one used for presentation server i.e. as fol
CALL METHOD cl_gui_frontend_services=>file_save_dialog

Hello,
What about F4_DXFILENAME_TOPRECURSION? You can check other FMs of the group DX_FILE.
BR,
Suhas
PS: I think these FMs are not released by SAP, so need to be cautious while using these

How can i get also the files in the root directory and how can i for testing add items of IEnumerable FTPListDetail to List string ?

What i get is only the directories and files that in other nodes. But i have also files on the root directory and i never
get them. This is a screenshot of my program after i got the content of my ftp. I'm using treeView to display my ftp content:
You can see two directories from the root but no files on the root it self. And in my ftp server host i have files in the root direcory.
This is the method i'm using to get the directory listing:
public IEnumerable<FTPListDetail> GetDirectoryListing(string rootUri)
var CurrentRemoteDirectory = rootUri;
var result = new StringBuilder();
var request = GetWebRequest(WebRequestMethods.Ftp.ListDirectoryDetails, CurrentRemoteDirectory);
using (var response = request.GetResponse())
using (var reader = new StreamReader(response.GetResponseStream()))
string line = reader.ReadLine();
while (line != null)
result.Append(line);
result.Append("\n");
line = reader.ReadLine();
if (string.IsNullOrEmpty(result.ToString()))
return new List<FTPListDetail>();
result.Remove(result.ToString().LastIndexOf("\n"), 1);
var results = result.ToString().Split('\n');
string regex =
@"^" + //# Start of line
@"(?<dir>[\-ld])" + //# File size
@"(?<permission>[\-rwx]{9})" + //# Whitespace \n
@"\s+" + //# Whitespace \n
@"(?<filecode>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<owner>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<group>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<size>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<month>\w{3})" + //# Month (3 letters) \n
@"\s+" + //# Whitespace \n
@"(?<day>\d{1,2})" + //# Day (1 or 2 digits) \n
@"\s+" + //# Whitespace \n
@"(?<timeyear>[\d:]{4,5})" + //# Time or year \n
@"\s+" + //# Whitespace \n
@"(?<filename>(.*))" + //# Filename \n
@"$"; //# End of line
var myresult = new List<FTPListDetail>();
foreach (var parsed in results)
var split = new Regex(regex)
.Match(parsed);
var dir = split.Groups["dir"].ToString();
var permission = split.Groups["permission"].ToString();
var filecode = split.Groups["filecode"].ToString();
var owner = split.Groups["owner"].ToString();
var group = split.Groups["group"].ToString();
var filename = split.Groups["filename"].ToString();
var size = split.Groups["size"].Length;
myresult.Add(new FTPListDetail()
Dir = dir,
Filecode = filecode,
Group = group,
FullPath = CurrentRemoteDirectory + "/" + filename,
Name = filename,
Owner = owner,
Permission = permission,
return myresult;
And then this method to loop over and listing :
private int total_dirs;
private int searched_until_now_dirs;
private int max_percentage;
private TreeNode directories_real_time;
private string SummaryText;
private TreeNode CreateDirectoryNode(string path, string name , int recursive_levl )
var directoryNode = new TreeNode(name);
var directoryListing = GetDirectoryListing(path);
var directories = directoryListing.Where(d => d.IsDirectory);
var files = directoryListing.Where(d => !d.IsDirectory);
total_dirs += directories.Count<FTPListDetail>();
searched_until_now_dirs++;
int percentage = 0;
foreach (var dir in directories)
directoryNode.Nodes.Add(CreateDirectoryNode(dir.FullPath, dir.Name, recursive_levl+1));
if (recursive_levl == 1)
TreeNode temp_tn = (TreeNode)directoryNode.Clone();
this.BeginInvoke(new MethodInvoker( delegate
UpdateList(temp_tn);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
foreach (var file in files)
TreeNode file_tree_node = new TreeNode(file.Name);
file_tree_node.Tag = "file" ;
directoryNode.Nodes.Add(file_tree_node);
numberOfFiles.Add(file.FullPath);
return directoryNode;
Then updating the treeView:
DateTime last_update;
private void UpdateList(TreeNode tn_rt)
TimeSpan ts = DateTime.Now - last_update;
if (ts.TotalMilliseconds > 200)
last_update = DateTime.Now;
treeViewMS1.BeginUpdate();
treeViewMS1.Nodes.Clear();
treeViewMS1.Nodes.Add(tn_rt);
ExpandToLevel(treeViewMS1.Nodes, 1);
treeViewMS1.EndUpdate();
And inside a backgroundworker do work how i'm using it:
var root = Convert.ToString(e.Argument);
var dirNode = CreateDirectoryNode(root, "root", 1);
e.Result = dirNode;
And last the FTPListDetail class:
public class FTPListDetail
public bool IsDirectory
get
return !string.IsNullOrWhiteSpace(Dir) && Dir.ToLower().Equals("d");
internal string Dir { get; set; }
public string Permission { get; set; }
public string Filecode { get; set; }
public string Owner { get; set; }
public string Group { get; set; }
public string Name { get; set; }
public string FullPath { get; set; }
Now the main problem is that when i list the files and directories and display them in the treeView it dosen't get/display
the files in the root directory. Only in the sub nodes.
I will see the files inside hello and stats but i need also to see the files in the root directory.
1. How can i get and list/display the files of the root directory ?
2. For the test i tried to add to a List<string> the items in var files to see if i get the root files at all.
This is what i tried in the CreateDirectoryNode before it i added:
private List<string> testfiles = new List<string>();
Then after var files i did:
testfiles.Add(files.ToList()
But this is wrong. I just wanted to see in testfiles what items i'm getting in var files in the end of the process.
Both var files and directoryListing are IEnumerable<FTPListDetail> type.
The most important is to make the number 1 i mentioned and then to do number 2.

Risa no.
What i mean is this. This is a screenshot of my ftp server at my host(ipage.com).
Now this is a screenshot of my program and you can see that in my program i have only the directories hello stats test but i don't have the files in the root: htaccess.config swp txt 1.txt 2.png....all this files i don't have it on my treeView.
What i want it to be is that on my program on the treeView i will also display the files like in my ftp server.
I see in my program only the directories and the files in the directories but i don't see the files on the root directory/node.
I need it to be like in my ftp server i need to see in my program the htaccess 1.txt 2.png and so on.
So what i wrote in my main question is that in the var files i see this files of the root directory i just don't know to add and display them in my treeView(my treeView is treeViewMS1).
I know i checked in my program in the method CreateDirectoryNode i see in the first iteration of the recursive that var files contain this root files i just dont know how to add and display them in my treeView.
On the next iterations when it does the recursive it's adding the directories hello stats test and the files in this directories but i need it to first add the root files.

FM for getting the logical file name

Hi,
is there any FM for getting the logical file name.
Thanks
Vikranth

Hi,
CONSTANTS: c_mask          TYPE char9      VALUE ',.,..'.
      Pick up the file path from the application server
FORM f1001_browse_appl_file .
DATA: lcl_directory TYPE char128.
lcl_directory = p_direct.
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
    EXPORTING
      directory        = lcl_directory
      filemask         = c_mask
    IMPORTING
      serverfile       = p_f2 " Parameter File
    EXCEPTIONS
      canceled_by_user = 1
      OTHERS           = 2.
IF sy-subrc <> 0.
   MESSAGE e000(zmm) WITH text-039.
   flg_app = 'X'.
ENDIF.
Then use OPEN DATASET for data reading
Hope this Helps.
Manish
Message was edited by:
        Manish Kumar

How to get full path using HTP.PRINT(' "input type ="file") ....

Hello everybody,
I am working on uploading file from page to another one using HTP package, but whenever I submit the form, it only takes the filename without the full path.
for example :
if i sent 'c:\dir\a.txt' , the other page receives file parameter as 'a.txt'
the code is here
PROCEDURE upload(appno in varchar2,wsct in varchar2) AS
l_real_name VARCHAR2(1000);
BEGIN
HTP.htmlopen;
HTP.headopen;
HTP.title('Test Upload');
HTP.headclose;
HTP.bodyopen;
HTP.header(1, 'Test Upload');
HTP.print('<form action="https://ssltrng.uaeu.ac.ae/trng/document_api.upload1" method="get">');
HTP.print(' File to upload: <input type="file" name="file" >
HTP.print(' <input type="submit" value="Upload">');
HTP.print('</form>');
HTP.bodyclose;
HTP.htmlclose;
END upload;
the other page see it as
file is 'Water lilies.jpg'
Thanks
Edited by: dtabed on Mar 30, 2011 1:02 AM

Do not understand the problem.
The code you've posted is a PL/SQL web enabled procedure that produces a dynamic HTML page. This page contains a form. And a full URL reference to the CGI that will process the form's data.
This is unusual - as it seems to be that the form is submitted across domains and web servers.. You usually refer to a local CGI procedure to deal with a form - no need for a fully qualified URL that includes web server and domain name.
If the CGI procedure that receives the form is also a PL/SQL web enabled procedure, that the uploaded file will be placed in the documents table (as defined in the DAD alias) by mod_plsql, prior to the web enabled procedure being called. The documents table will contain the Mime type, file name, file contents and other details.

Powershell Get-childItem: The specified path, file name, or both are too long.

Hey Scriping Guys!
I've been using a PowerShell script for a couple of years now to generate a monthly report showing the size of user folders on a number of departmental file servers. It's working just fine on all file servers except one where the users have gotten carried away with creating sub-folders and using realy long descriptive file names. The problem piece of script is this:
$colItems = (Get-ChildItem \\192.168.10.5\marketing -recurse | Measure-Object -property length -sum)
"marketing-serv\marketing: "+"{0:N2}" -f ($colItems.sum / 1GB) + " GB"
The reply I get is:
Get-ChildItem : The specified path, file name, or both are too long. The fully
qualified file name must be less than 260 characters, and the directory name mu
st be less than 248 characters.
At G:\data\Server_space_Report\serverspace2.ps1:37 char:27
+ $colItems = (Get-ChildItem <<<< \\192.168.10.5\marketing -recurse | Measure-Obje
ct -property length -sum)
Yes, the message is correct, however, when I connect to the server, right click the folder and chose properties it returns a size of 128 GB. My questions are
1. Why does clicking on folder properties not produce an error (what is it doing differently from my script)?
2. How can I fix my script?
Thanks,

I am trying to clear up the older open posts on this forum. If this is still an unresolved issue for you please let me know. If you do not post back within one week I will assume it is resolved and will close this thread.
Thank you
Ed Wilson
Microsoft Scripting Guy

FM for MatchCode to get Server path-file ?

Similar Messages

Maybe you are looking for