FM IDOC_OUTPUT_DELVRY

Hello Experts...
I am using DELVRY03 as Basic Type and made the process code 'DELV' which will call FM 'IDOC_OUTPUT_DELVRY'.
Now when i open delivery document in change mode and save that document without changing anything in document then also it triggers IDOC.
How will i stop it to create the IDOC when user dont change anything?

Are u creating the idoc through output type, if yes, then if data is not changed, System will not create the IDOC Again. If you want to create the idoc only once, you can de-select the "multiple issue" in output type settings.
Regards
Vinod

Similar Messages

Exit for Enhancing the FM IDOC_OUTPUT_DELVRY

Hello All,
I have a requirement where I need to send some custom fields along with the standard delivery details using outbound idoc to a non-SAP system. I have done all the extension related task, and used user-exit EXIT_SAPLV56K_002 to process the custom fields...but the custom segment is not found in the EDIDD table of this Exit.
However the idoc is getting successfully posted...but without the custom segment.
Request you to suggest what needs to be done to process the custom fields.
Thank a lot for your co-operation.
Regards
Anand

Hi Hoo Laa,
IDOC_OUTPUT_DELVRY FM will interlink with Process code,when you create delivery ,automatically output type will trigger,let me say one example.
You are sending the delivery from SAP R/3 to Middleware.
You create delivery in VL01N Transaction,so output type ( LD00 Standard output type for Delivery ) will trigger.
This output type will interlink with process code ,message type at Partner profile transaction ( WE20).
Process code (WE42,WE41) contains FM ,this fm will create IDOC.
When you maintain output type in SPRO Transaction,here you mention the medium,program name ..
Program name is RSNAST00 -> this will call FM Internally.
If you want to see exactly then you need to debug the rsnast00 ( I am not aware of this one internally).
Thanks
Seshu

IDOC_OUTPUT_DELVRY issue

Hi There.
I am using process code DELV for functional model IDOC_OUTPUT_DELVRY in partner profile for generating an output idoc (I have created new idoc type with new segments for message type delvery05.)
The problem is that while putting breakpoint in FM IDOC_OUTPUT_DELVRY and retriggering the output through VL02N the system is not stopping at breakpoint . It is not possible that this FM is not being used as if I remove the FM IDOC_OUTPUT_DELVRY from we20 it will not process the idoc.
Could you suggest me the reason why my debugging is not working in this case. FM is definitly activated.
Regards
-Manu

Dear Manu
Though I am not familiar in ABAP side, the reason could be if you set the break point between some IF conditions within which, already there would be some coding to skip, then in that case, breakpoint will not work.
The better place to post this question is in the below link
[Forum: ABAP, General |ABAP Development;
thanks
G. Lakshmipathi

Error raising exception in user-exit for idoc_output_delvry.

Hi All,
   When I try to raise an exception from the user exit (idoc_output_delvry),
I get an error message 'Assign Measurement unit to ISO code'.
    Can you help me solve this issue.
Thanks in avance,
Disney.

Michael,
       Thanks for the quick response,
I did check in IMG, an entry is already there, the 'primary field' is checked,
USD is assigned to the iso code USD.
Regards,
Disney.

IDOC_OUTPUT_DELVRY enhancement

We need a enhacement for mesage type DESADV , which is using FM IDOC_OUTPUT_DELVRY for processing. I did some investigation and found that there are more than one option available
1) User exit EXIT_SAPLV56K_001 which is being called after each segment.
2) BADI BADI_V56K_IBS called at the end.
3) BADI BADI_V56K_AII called at the end.
I am in bit of confusion which one to use.

Dear Manu
Though I am not familiar in ABAP side, the reason could be if you set the break point between some IF conditions within which, already there would be some coding to skip, then in that case, breakpoint will not work.
The better place to post this question is in the below link
[Forum: ABAP, General |ABAP Development;
thanks
G. Lakshmipathi

Why i couldnt find the FM:IDOC_OUTPUT_DELVRY in RSNAST00 program?

It was said that excute RSNAST00 to call the 'EDI_Processing' and 'ALE_processing'...Then corresponding FM will be invoked...
But why i couldnt find the FM: IDOC_OUTPUT_DELVRY within the FORM EDI_processing????
Where could find the statement like: CALL Function: IDOC_OUTPUT_DELVRY ??
Thanks!!!

Hi Hoo Laa,
IDOC_OUTPUT_DELVRY FM will interlink with Process code,when you create delivery ,automatically output type will trigger,let me say one example.
You are sending the delivery from SAP R/3 to Middleware.
You create delivery in VL01N Transaction,so output type ( LD00 Standard output type for Delivery ) will trigger.
This output type will interlink with process code ,message type at Partner profile transaction ( WE20).
Process code (WE42,WE41) contains FM ,this fm will create IDOC.
When you maintain output type in SPRO Transaction,here you mention the medium,program name ..
Program name is RSNAST00 -> this will call FM Internally.
If you want to see exactly then you need to debug the rsnast00 ( I am not aware of this one internally).
Thanks
Seshu

Error out IDOC IDOC_OUTPUT_DELVRY

Hi Experts,
I need to change the status of IDOC in the FM IDOC_OUTPUT_DELVRY.The requirement is if the serial number in the segment E1EDL24 is empty the IDOC should go into error state.Where do I need to change the status of IDOC.I checked the user exit EXIT_SAPLV56K_002 and found that is not useful in this case.
It is urgent. Immediate response is appreciated and rewarded.
Nagesh

How and where to add your requirement logic if you are not aware.For create new requirement you need to have access key.
1. Call transaction VOFM
2. Go to menu item Requirements->Output Control
3. Start with a copy of Routine 2: Put your cursor on the number 2, give it a new number such as 902 and hit enter. A copy of this routine will be made
4. Go to your new routine and add your logic to check
5. If you do not want to send the output, set sy-subrc =
Thanks,
Narayan

Copy IDOC_OUTPUT_DELVRY to ZIDOC_OUTPUT_DELVRY

Hi,
I am copying IDOC_OUTPUT_DELVRY to ZIDOC_OUTPUT_DELVRY but when i check all the includes hasn't been copied. Do I need to copy all includes manually and then call them in the main program or is there any other way to do this.
Secondly, I need to extend the idoc so can I use the Zfunction module in that case.
Regards
Rinku
Message was edited by:
Rinku Malik

I Copied the function group from SE80 and it asked for fucntion module name which needs to be copied.
But when I will extend the IDOC then the exit which i would be using would be available in this fucntion module or not. I am confused please clarify how it will work.
Regards
Rinku

Problem with IDoc for an outbound delivery

Dear All,
I am facing a problem with the IDoc defined for an outbound delivery.
Scenario:
Implementation of a small enhancement for an IDoc (DESADV, DELVRY01) created for an outbound delivery (in VL02N).
What I did:
I implemented the EXIT_SAPLV56K_002 exit in the V56K0001 enhancement, activated in SMOD, assigned V56K0001 component in CMOD and acivated it. Then I put a breakpoint on the ZXTRKU02 include. For me everything in SMOD and CMOD looks OK.
I have also created a partner profile, port, outbound message config. (message DESADV, basic type DELVRY01, application V2, output message type LAVA, process code DELV. function module used for this process code is IDOC_OUTPUT_DELVRY).
What I can do:
I can issue an IDoc message, it looks ok and contains the standard data.
Problem:
It seems that the enhancement does not work. Finally I put there only one line of code to avoid a program bug and just to check . The system does not stop at the breakpoint (set on the ZXTRKU02 include in the EXIT_SAPLV56K_002 exit).
Am I using the proper exit? I appreciate any suggestions.
Thanks,
Grzegorz Skorus

Hello Grzegorz
Not an expert on this, but noone is responding so I thought let me try and help you. You seem to be doing the right things as mentioned in OSS note 1498409.
Firstly since this can be called form Shipment Idoc also, you may need to make a differentiation by the interface parameter 'MESSAGE_TYPE' or segment name. See the attached OSS note, though it belongs to older releases, it may help you.
Also help says 'The callup of this function module is programmed for each enhancement of the internal table for the IDoc (in other words, when you add an extra segment'. So may be you need to add an extra segment/field to make it work.
Futher the user exits are replaced by BADIs. May be you should use exit_badi_v56k.
Hope this helps and others will pitch in.
1498409 - Valuation Type unavailable when creating deliveries using IDOC
631913 - Exit after formatting delivery IDoc type DELVRY

Extended idoc not populating(urgent)

hi guys
i have extended the basic idoc type delvry03 and created an extension delvrtext for it.however when i trigger the idoc from an output type the extended segments are not populated.is there a way you can put a break point in the code.if that is possible it will help me a lot.i am using the FM idoc_output_delvry to create this.i tried putting break points in rsnasted as well as the above FM but it doesnt stop and the idoc gets created.please tell me how do i make sure my code for populating the extended segments is running properly.
please reply as soon as possible.thanks for your time and help.

hi guys.
thanks for the reply first of all.srinivas what do u mean by assign the extension to application object?i have done the configuration in we82 where i have attached the basic idoc type and extension to message type desadv. the function module is attached to the process code which is used in partner profiles for the idoc processing.can u explain me in detail.the idoc standard idoc is getting created but not the extended segments.also there is this weird message when i run a check on the partner profiles as follows
   Entry XIDCLNT300/LS/LS/DESADV /
   Message Control entry exists for this entry
   Port exists
   Basic type exists
   Extension exists
<b><u>   Combination of basic type and extension is not possible</u></b>
   Link exists between logical message and IDoc type
what does this mean any idea?
once this check is done probably i can go and do the breakpoints.i just have a feeling that i am missing some small thing here.
please let me know
thanks

Idoc extension question...

Hi all,
I have an extension defined for DESADV (outbound) and when I see the process code in we20 it is still tied to the FM, IDOC_OUTPUT_DELVRY. How is it possible for the std. FM to populate the extended segment in DESADV?
Please tell me if I want to send some more data in the ASN then can I just add a field in the segment or should I add another segment? Which one will be populated in my scenario?
Thanks,
Charles.

Hi Charles,
We cannot add the New fields in Existing segments.
For this requirement we have to Create a new Zsegment (Tcode WE31)
and then Add this in Extension IDOC type that we have to create in we30.
Regards,
Satish

Posting Program needed

Dear All,
1) Can anyone tell me if there is any Standard Posting Program to Post IDOC DELVRY03 from SAP to other external System. If there is no Standard program, Can any one let me know any Function module which can help me post IDOC DELVRY03.
2) Do anyone know about transportation planning point. How this needs to be Set for External Systems?
Thanks in advance,
Aarti

Hello Ravi,
Thanks for your quick reply
But I don't want to use FM :IDOC_OUTPUT_DELVRY as this would want me to create a output type to initiate the NAST table required for the FM
Is there any standard transaction to Send Deliveries through IDOC DELVRY03 or any other FM which doesn't require to fill NAST table.
I checked WE64 as well, it links me to same FM :IDOC_OUTPUT_DELVRY as processing routine.
Regards,
Aarti

Information about outbound delivery and its handling units

Hi All experts,
I am working on a requirement where I have to display information about the following :
1. Outbound delivery number.
2. related Handling units( 1 or 2 ) indentification number.
3. Transport number.
4. Shipping to party.
5. Line items of handling units like material inside the handling unit.
6. Material quantity.
In the selection criteria user is given the choice of entering
1.Outbound delivery number.
2.Transport number.
3. Handling unit identification 1 or 2
4. Shipping to party
Based on this information on selection screen ouput needs to come out.
Could you people let me know about the tables and function modules which gives the informaiton back based on these details.
Thanks,
Mark

Hi Mark,
try out with IDOC_OUTPUT_DELVRY this Function Module.
Reward points if it is useful.
Regards,
Prasad

Missing items in the IDoc for the delivery

Hi to all,
Sorry if not posting in the right forum.
In my customer's scenario, an IDoc is created against a delivery (via the delivery output), and sent via ALE to a distant warehouse system, for picking and GI posting (basic type SHPMNT03).
For some times, the IDoc created against deliveries including BOMs is missing the main item of the BOM (though the BOM main item is in the delivery).
Consequently, the integration in the distant system is failing, because the higher-level item referenced in the BOM sub-items is missing.
Surprisingly, re-triggering the delivery output does re-generate a complete IDoc, where the segment for the main item is back.
I looked almost everywhere, did many searches in OSS (on SHPMNT03, on HIPOS, on E1ELD24 - segment name in the IDoc -, on "Missing items in the IDoc for the delivery", etc...), I even simply googled the web, but I can't even figure out what is the cause for this (I imagined it could be caused by a missing commit in the program generating the IDoc, but don't know whether this make sense).
Any help would be highly appreciated.
Thanks in advance and best regards
Yan
Edited by: Yan Loiseau on Jul 8, 2010 12:52 PM
Edited by: Yan Loiseau on Jul 8, 2010 12:56 PM

Hello Yan
Jelena is right, you are better off taking it up with SAP. I also did not find any relevant OSS notes.
However the issue, according to my reading, is in the following areas:
1) LV56KF05: INCLUDE LV56KF62 . " FILL_E1EDL24"
This fills the EIEDL24 segment, may be the main item is filled initially and overwritten later.
2) Function Module: IDOC_OUTPUT_DELVRY
You can look at the following OSS notes (though not fully relevant) for some clues:
810981 - Reference data missing in DESADV IDoc from decentralized WMS
537470 - BOM + batch split in decentralized WMS, confirmation fails
752921 - VL563: Higher-level item does not exist
705086 - Higher-level item does not refer to existing item
Hope this helps. Good luck.

Deleting a segment in an IDOC - ABAP - IDOC Scenario

Hi All,
I stuck at one issue..when we send delivery shipment notice through EDI..it takes output type "YSH1'. whenever in line item category is 'YPLC' the idoc sending failure..
So the requirement is whenever output type is 'YSH1' and item category is 'YPLC'..the IDOC segment should be delete at runtime...
So...Let me know Is there any Function Module to delete the IDOC particular line item segment E1EDL24..in the EXIT .."EXIT_SAPLV56K_002".
If there is not any function module please let me know how to delete the segment at runtime...
Please Help me ASAP..
Thanking you all
Surya
Message was edited by:
Suryakant Baranwal

Hi Sivaparvathi
I am really so thankful to you for your suggestion..
Please guide me how do I make changes in RBDOUTPU program which make possible to delete the particular one segment or more than one segment according to item category of line item data.
I am manipulating data in EXIT 'EXIT_SAPLV56K_002' and the data is filled in the IDOC before processing of this EXIT ..in the function module 'IDOC_OUTPUT_DELVRY' ..Please correct me if my understanding is wrong..
So how do i delete the existing segment of IDOC in this USEREXIT...
Please help me...
Thanking you
Suryakant Baranwal

FM IDOC_OUTPUT_DELVRY

Similar Messages

Maybe you are looking for