FM in eCATT

Hi all
I am programming ABAP in eCATT. I have plant and Company code in Solution Manager from my log. Using these details, I need to find the Sales org from T001W that is available in the target system
For this I chose the Function Modules,
GET_TABLE_RFC,
TABLE_ENTRIES_GET_VIA_RFC,
RFC_GET_TABLE_ENTRIES
But I am not aware as how to use these function modules and get my requirement out of this. Please guide me
Thanks
Tharani

Is ur target a SAP system? If yes u need to create a custom function module in the target system with import parameters plant and comp code and Export parameter as Sales org. Inside this function u need to write the logic for deriving sales org from the import parameters.
mark the function as remote enabled in the atributes tab,
Call the function in the eCATT script as below
CALL FUNCTION 'UR_FUNC_NAME' DEST 'RFC destination of target'
exporting
cocode = 0001
plant = 0002
importing
sales_org = XXXX
If the target is not SAP then u will have to work with the middleware team and the target team to implement web services to meet ur requirement.
-Kiran
Message was edited by: Kiran Raorane

Similar Messages

How to load Test data from a Text file in ECATT

Hi,
I have created a test configuration with a test script, system data container, and test data container.
I have done the recording of a transaction and created the script. Parameterization is done for the script and have imported those parameters from script in to the data container.
I am trying to load a the data from a text file on the local work-station. The data is not being read.
Please explain this in detail (step by step) as I am very new to ECATT.
I am trying this on SAP ECC 6.0 IDES server.
Thanks in Advance
Vikas Patil

Please explain this in detail (step by step) as I am very new to ECATT.
Thanks in Advance
Vikas Patil

Unable to capture screen fields in eCATT

Problem description 1 : Unable to capture screen fields in eCATT
Recording using SAP GUI Method.
Problem description 2 :Unable to capture Tab controls while recording
in eCATT using SAP GUI Method.
Thaks for any suggestion you could provide me and once again for your courtesy attention.
Regards,
Eric Monteiro

Hi Phani,
Please try below code:
*data declaration for reading values given by user in the selection screen field.
DATA: BEGIN OF i_tab OCCURS 0.
          INCLUDE STRUCTURE rsselread.
DATA: END OF i_tab.
MOVE: 'LOGSYS' TO i_tab-name,
        'P' TO i_tab-kind. u201CP For parameter
APPEND i_tab.
MOVE: 'GP_SIMVE' TO i_tab-name,
        'P' TO i_tab-kind. u201CCheck if field is Parameter
APPEND i_tab.
*move program name and screen number into local variable.
l_prog = sy-repid. u201C(Try by directly passing program name also)
l_dynnr = sy-dynnr. u201C(Try by directly passing Screen number also)
*calling function module to get the value given by user.
CALL FUNCTION 'RS_SELECTIONSCREEN_READ'
    EXPORTING
      program     = l_prog
      dynnr       = l_dynnr
    TABLES
      fieldvalues = i_tab.
Hope this should slove your issue.
Thanks & Regards,
Gaurav.

RFC connection error in recording eCATT from Solman

Hello,
I am trying to record eCATT from Solution Manager into our DEV box. I have set-up the RFC connection and tested them.
When trying to recording I got the following message:
"RFC error ThControl: illegal sap_dext call !!!/ connection"
Any suggestion?
Thank you.

Hi
Did you ever find any solution for this, as I am receiving same error even though seems that all settings are in place?
Thanks!

ECATT abends during recording when lead selection is set to 0 on web dynpro

We have a web dynpro application that works ok when running by itself.   When we tried to record ECATT testing on it, it abended after we click on a selection from a list of values.    The error on the browser indicated an error on the "lead select".   After reviewing the dump, we found that it abends on an exception when the lead selection on the ALV is not set.   When we changed our code to set the lead selection to 1, the ECATT recording worked.
We have a requirement to set the lead selection of ALV to 0 so we need to change back our code.   We just did the setting to 1 just to get ECATT recording to work for now.    Does anybody know why ECATT requires this?   Is there a support packs that fixes this?
Here is a snippet from ST22 for more details on this:
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_WD_CONTEXT
Date and Time          2007/02/07 14:50:06
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_WD_CONTEXT' was raised, but it was not caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_WDR_CONTEXT_NODE===========CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_CONTEXT', was not caught and
therefore caused a runtime error.
The reason for the exception is:
The lead selection has not been set. VIEW_TABLE
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_WD_CONTEXT"
"CL_WDR_CONTEXT_NODE===========CP" or "CL_WDR_CONTEXT_NODE===========CM00V"
"_RAISE_ELEMENT_NOT_FOUND"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "torsapd01"
Network address...... "10.2.75.183"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 8 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "TORSAPD01"
Database type..... "MSSQL"
Database name..... "PR3"
Database user ID.. "dbo"
Char.set.... "English_United State"
SAP kernel....... 700
created (date)... "Aug 28 2006 22:20:27"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 75
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 16128
EM...... 16759616
Heap.... 0
Page.... 0
MM Used. 12713776
MM Free. 4042608
User and Transaction
Client.............. 200
User................ "SIC0010"
Language Key........ "E"
Transaction......... " "
Program............. "CL_WDR_CONTEXT_NODE===========CP"
Screen.............. "SAPMHTTP 0010"
Screen Line......... 2
Information on Caller ofr "HTTP" Connection:
Plug-in Type.......... "HTTP"
Caller IP............. "10.49.77.47"
Caller Port........... 8000
Universal Resource Id. "/sap/bc/webdynpro/sap/zpr3_base_price/"
Information on where terminated
Termination occurred in the ABAP program "CL_WDR_CONTEXT_NODE===========CP" -
in "_RAISE_ELEMENT_NOT_FOUND".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 11
of the (Include) program "CL_WDR_CONTEXT_NODE===========CM00V".
Source Code Extract
Line
SourceCde
1
method RAISEELEMENT_NOT_FOUND.
2
data: l_count type I,
3
l_node_name type string.
4
5
l_node_name = if_wd_context_node~get_path( ).
6
7
l_count = if_wd_context_node~get_element_count( ).
8
if l_count = 0.
9
raise exception type cx_wd_context exporting textid = cx_wd_context=>NODE_EMPTY node_nam
10
elseif element_index = if_wd_context_node=>use_lead_selection.
>>>>>
raise exception type cx_wd_context exporting textid = cx_wd_context=>NO_LEAD_SELECTION n
12
else.
13
raise exception type cx_wd_context exporting textid = cx_wd_context=>ELEMENT_NOT_FOUND n
14
endif.
15
endmethod.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
2
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
HTTP Control
SY-MSGTY
E
SY-MSGID
TD
SY-MSGNO
600
SY-MSGV1
000003587101
SY-MSGV2
0001
SY-MSGV3
EN
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070207
SY-UZEIT
145005
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT

Hi Eugene,
i suggest you raise an SMP ticket for these.
Looks like a bug at first glance.
regards
Phil

Problem with clicking CheckBox eswith eCATT recording

Hi All,
Iam using SAP GUI 640,ECC500.
Am trying to set some default setting in Finance Transaction FB00 with clicking some checkboxes.
So,After i recorded with clicking checkboxes,For testing that recording i unchecked the check boxes manually and executed the script .but i dont see any boxes checked after i execute the script.I checked in the debugging mode,it is showing in the screen that the checkboxes are checked.but at the end of the script when i open the transaction manually the checkboxes are unchecked.
Is their anything to be cautious when recording Checkboxes.If so please pass your comments.
Thanks in Advance,
Sarapu

HI Rajender,
Are you using TCD or SAPGUI for the recording.
In either cases make sure that you are passing value "X" to the checboxes in your recording or passing value "X" to the variable you have assigned to the checkboxes.
In general you donot need to take any special care for handling Check boxes and they are identified with both TCD and SAPGUI as part of the standard eCATTS.
Hope this solves your problem. DO get back to me if you still have the same problem.
-Harsha
PS: Award points if this answers your questions.

Importing internal table data from FM to eCATT test script

Hi all,
I am working on Workflow project where by i need to post invoices related to purchase orders sent as scanned imaages. Incase all the data in the incoming invoice(scanned) is correct then i am using BAPI_INCOMING_INVOICE_CREATE to post the invoice.
But when the data is wrong, i need to give the user MIRO transaction pre-populated with the invoice details so that he manually corrects them(after verification) and posts the invoice.
I understand MIRO is an ENJOY transaction hence BDC doesn't work properly(i have tried with all kinds of options on recording and the problem comes incase of multiple POs) hence i choose to use eCATT.
The recording worksfine but my real problem is the PO data (multiple PO details for same invoice) is in table form. In all my previous objects related to eCATT we used to upload the file, hence no problem of importing tables.
But now as i'll call this test script from a function module which has all the POs in the form of internal table, i need to import this into my test script.
Please any body tell me how to proceed in this case or please suggest me a better a way to record the MIRO.
Thank you,
Lakshmi Narayana.S

Hello Raj,
First of all thank you for your inputs.
Yes, I know about Parking an invoice. even i am using it in some scenarios.
If everything on the invoice matches with the values in SAP then i am posting it using BAPI invoice_create also.
But for some scenarios like if the PO on the invoice doesnot match with actual PO then i need to create a work item in the Accounts Payable user's inbox and he will change invoice data manually (after getting confirmation and correction) and post it using MIRO.
Here i need to pre-populate the MIRO with the invoice data so that he can correct and post it.
Hence i was trying to write a BDC and as MIRO is an Enjoy transaction i thought writing a BDC is not a good idea (i tried writing BDC but had problems) hence i am using eCATT.
Hope i am clear about my problem. Any inputs to solve this are welcome.
Thanks,
Lakshmi Narayana.S

How to use the tool eCATT in SAP-HR?

Hi All,
Can any one tell me in-detail.......
1) How to create a test script?
2) hoe to create data containers?
3) understanding abt data containers?
4) executing system configurations?
Thanks in Advance

Do you see the search functionality in the upper left of the screen?
Okay, now type in ecatt, press enter and in the next screen filter on blogs.

In eCATT, How to mention the values as input parameter during test script

Hi,
1. I am just learning eCATT tool. I created a Test Script by recording my transaction. But if i want to execute the recorded transaction with different data then how to store the values.
2. How to execute my Test Script created in one client to another client of same server. is it just by mentioning the target system or do we have to do anything in anothere client.
Lakshmi

Hi
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e0ebec-c9da-2910-689e-b1a22a621c7f
Manoj Shakya.

How to create a variant in ecatt?

Hi all,
I am new to Ecatt scripting. I hav a requirement from the user, that one ecatt is used for two sales org using two variants.
I recorded as per the requirement ( first i created one basic script and called it in a master script ). Now I need to create two variants for the master script for the sales org.
So could any one suggest how to create a variant in ecatt?
Thanks in advance.
Vijayakumar.G

Hello Vijay,
After recording parameterize everything whatever you want.
In parameterization table leave the value field as empty, I mean don't give any value.
Select the following in the menu,
Utilities>Test configuration>Create
Now, test configuration name will have the same of the test script name.
Provide the details in the configuration tab. Then in the variants tab select the second radio button "Internal variants".
In the variant table you can see the default variant "ECATTDEFAULT". You can make use of this also. Otherwise you can also create your own variants by clicking "Insert variant" button.
The variables whatever you have created in the test script will be there in the table. Now, Create variant and provide values for each variables.
You can also select the variants which need to be executed.
Now you can run the test configuration. It will be running number of times according to the created number of the variants.
You can also create Test data for your test script and configuration.
Try this, I hope it will help.
Feel free to reward if it helps.
Regards,
Gopi
Edited by: Gopinath K S on Oct 7, 2008 7:37 AM

How to create a field value as constant while creating eCATT scripts

Hello Guru's,
I am updating thousands of records using eCATT. How should i declare a field value as constant while creating a eCATT script it self, so that it automatically picks that value and update the records. I should not mention the field value in the upload file.
Full points for the answer,

Dont parameterize the value that you would like to keep as constant. Pass the default value to that feild while reocrding .

Need how to get the data from the external file in eCatt

Hi ,
Could any body suggest how to get the values from the external file(Excel,CSV file,Text file) and pass it as varaiable in ecatt Test script.
Problem: Need to execute FK01-Vendor creation Transaction with multiple set of data .As per my understanding we could achive through Variants in Testdata set in eCatt .
But is there any way to store the data in excell file and get the data and pass it to FK01 Test scripts
Appreciate response on this

Hi
See the links they may be useful
check these link,
eCATT- An Introduction
/people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
Creating Test Scripts
/people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
eCATT Logs
/people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
eCATT Scripts Creation TCD Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
Creation of Test Data Container
/people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
eCATT Scripts Creation - SAPGUI Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
Integrating ECATT & MERCURY QTP Part -1
/people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
Using eCatt to Test Web Dynpro ABAP
/people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
and
-command reference
http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
/people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
http://prasadbabu.blogspot.com
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
http://www.erpgenie.com/ecatt/index.htm
hope this helps.
Reward points for useful Answers
Regards
Anji

Error in executing eCATT GUI Script

Hi
I am getting following error (in bold) while executing eCATT GUI Script. This happens only for GUI Scripts and not for TCD scripts. Please help me to solve this issue.
0000000195 Test Scrpt ZGUI_SCRIPT4 Version 1 - SECATT [Without Interruption]
R01 800 SANDEEPK1 E 620 sapnw10 Windows NT MSSQL 26.05.2006 12:42:29
ZGUI_SCRIPT4 [0,109 sec] Version 1 ZGUI_SCRIPT4
Tgt System TEST_ECAT->ECATT_SAPNW10_800_E->T90CLNT090 (R01 800 ALEREMOTE E 620 sapnw10
Windows NT MSSQL)
Error in eCATT function SAPGUI
Destination ECATT_SAPNW10_800_E RFC error
service 'sapgw-1' unknown / CPI-C error CM_PRODUCT_SPECIFIC_ERROR.
Thanks in Advance.
Regards,
Sandeep K.

Hi Sandeep,
 My self , Sreedhar D, working eCATT using SAPGUI recording.
 i think ur problem is resolved. Can u help for the below issue.
 Scenario:
 And i working on testing server which does not have any trasaction, i have to record the transaction using RFC connection to different machine.
 I did all the that process and able to connect remote machine.
 i started doing the recoding in SAPGUI after creation of sys. Data container by specifying RFC connection.
 I recorded the script, but when i try to execute the same this attached error r coming.
 But i recorded the same using TCD(Recorded) using remote connection and able to sucessfully execute.
 One more thing also, we used write the script for reading the test data from Excel and pass as parameters using TCD(Recording).
Below is the error
 Target sys ECATT_SAPTD120_400_E_0002
 Destination ECATT_SAPTD120_400_E_0002 RFC Error
 Waiting for ur response. Thanks in Adavance.
Sreedhar d

Error while running eCATT for Best Practice HR- US

HI All,
I am executing BC sets through eCATT for implementing Best Practice of HR for US. While running eCATT i am getting two errors, i am not in a positiong to find out a solution. Can you guys please share your throghts.
Error messages are as follows:
1) Error in eCATT command CHEVAR
    Condition not fulfilled
2) Error in eCATT command ABAP
    LOCAL GENERATION LIMIT 36 SUBPOOL REACHED
Looking forward to the response
Thanks & Regards
Shyam V

Hi Shyam,
              I was just wondering if this document may help the query you were looking for
http://help.sap.com/saphelp_nw04/helpdata/en/43/2f34413f97f323e10000000a155106/frameset.htm
Hope you decode the error.
Have a best day ahead.

Error - Vavlue is not an eCATT parameter

Hello Colleagues,
I am using SAPGUI recordign mode and while compiling i am getting the below error can anyone help me to resolve the issue ?.
Test Script MIB_INS_CATEGORY_PERS_TAB,Version 1,
Reference V_VALUE for SAPGUI_1_29-PROCESSEDSCREEN[1]-USERCHANGEDSTATE-
GUIELEMENT[1]-STATE-SETPROPERTY[1]-VALUE Is Not Defined as an eCATT
Parameter
More details,
I am trying to give an input in one of the rows of the table in the scenario .
regards
harsha
Edited by: Julius Bussche on Feb 6, 2009 8:58 PM
Please use meaningfull subject titles

>
Harsha S wrote:
> Hello Colleagues,
>
> I am using SAPGUI recordign mode and while compiling i am getting the below error can anyone help me to resolve the issue ?.
>
> Test Script MIB_INS_CATEGORY_PERS_TAB,Version 1,
> Reference V_VALUE for SAPGUI_1_29-PROCESSEDSCREEN[1]-USERCHANGEDSTATE-
> GUIELEMENT[1]-STATE-SETPROPERTY[1]-VALUE Is Not Defined as an eCATT
> Parameter
>
> More details,
>
> I am trying to give an input in one of the rows of the table in the scenario .
>
> regards
> harsha
Hi Harsha,
This error may be due to the fact that you have not declared the variable that is used in the Parameterization part.
Else,there may be a reason that while parameterizing you have put the parameter in the wrong place.
You have to put the variable in the correct place for parameterization.
Hope this info helps.
Thanks and Regards,
Senthil.

Assigning a timestamp to an Import Parameter in eCATT

I am trying to assign a value to an Import parameter that will be unique every time the eCATT script runs. I have inserted a piece of Inline ABAP code that looks like this:
ABAP.
 DATA: BEGIN of wa,
 time_stamp TYPE P,
 END OF wa.
 GET TIME STAMP FIELD wa-time_stamp.
 I_DATETIME = wa-time_stamp.
END ABAP.
This only assigns a time stamp to I_DATETIME is the parameter is type V. Unfortunately, the script produces an error unless I_DATETIME is type I, however the Inline ABAP produces a syntax error when I_DATETIME is type I.
For example, when I_DATETIME is type V I see in my
LOG I_DATETIME statement that the value 20050518200719 or something similar has been assigned to that parameter. However, in the SAPGUI command interface where I deleted the original number value and replaced it with parameter I_DATETIME it reads: Value = I_DATETIME = '
Why can't I use parameters of type I and V interchangeably in the script and Inline ABAP? Is there an easier way to go about getting a time stamp or unique value for an Import Parameter?
Message was edited by: Ben Weisberg

Ben,
there are two issues here:
Parameter visibility in inline ABAP
In inline ABAP, only local variables (visibilty V) can be used. The reason for this was to minimize the amount of data that has to be transferred to the target system of the script when the inline ABAP is generated.
Avoiding inline ABAP where possible
You said yourself that you suspect your approach is inefficient. I always tell people that inline ABAP can be fun, using the eCATT script language is better
You can generate yourself a timestamp in eCATT like this:
First, declare a parameter with type C. Since you are going to fill it in the script, there is no need for it to be an importing parameter - local variable (V) will do - let's call it V_TIMESTAMP.
Fill the field using either
V_TIMESTAMP = &DATE & &TIME
or
V_TIMESTAMP = sy-datum & sy-uzeit
What's the difference?
If you use the eCATT variables &DATE and &TIME, you will always get the date and time of the current target system. If you use the ABAP system fields sy-datum and sy-uzeit, you will always get the date and time of the local eCATT system. Obviously, if you are working locally in a system, these two sets of values will be the same. However, if you start working remotely - possibly against app servers in different time zones - you will have to decide which you want to use.

FM in eCATT

Similar Messages

Maybe you are looking for